Related
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
Click to expand...
Click to collapse
I had this problem with the 1413 build, but not since going to the new 318 setup.
mattk_r said:
I had this problem with the 1413 build, but not since going to the new 318 setup.
Click to expand...
Click to collapse
Where I can download it from???
Hikari said:
Where I can download it from???
Click to expand...
Click to collapse
there many roms now build on 318
have a look and you will see
its right said:
there many roms now build on 318
have a look and you will see
Click to expand...
Click to collapse
Hmmm but my rom is 5.2.318 (build 15341.4.0.01)
I tracked that down as being a problem with radio signal strength. Every time the radio signal strength changed it would wake up the phone. That was annoying, but I never found a fix for it since I upgraded to a different to a different ROM that doesn't have that problem. It may have been a problem caused by BatteryStatus's signal strength monitor though rather than the ROM's because it didn't start until I installed BS if I remeber right.
just lock the phone
before put the wizard in sleep mode. then it doesn't wake up when you dont neeD it
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
don't use a windows mobile password in WM6 (start -> settings -> lock). for mee it makes the phone wake up often. if I remove the password it doesnt wake up automaticly any more
hmm
maybe theres a ghost inside your wizard loll
I had a ghost in my wizard once, had it exorcised, and then it moved into my car. Now my car starts on its own!
Indeed I have a password. Furthermore I noticed that at the outset (WM6 + all software I'm using) the problem didn't exist at all. I think that it started after hard reset + system restore (spb backup).
I did some hard reset, but unfortunately the problem still exist (at least I think so, but today I will check it more thoroughly) HELP!
Here's what I would do if I wanted to keep my current rom - assuming it didn't have this behavior before (I've been known to be excessive at times ):
Back up your phone with something like PIM Backup or whatever you prefer - don't forget your themes, pictures, whatever.
Do a hard-reset.
Test for this symptom before installing any applications.
If the symptoms exist, try a different radio, if not, install BatteryStatus and test again.
Continue until you find the culprit.
Might take a while, but you should be able to find the issue...
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
Click to expand...
Click to collapse
I don't need to know the reason - I just need a solution?
BTW which one is the best WM6 ROM for wizard now?
The problem lies on having a both a password set and backlight settings on. Either remove the password or turn off the "turn off backlight if device unused for..." setting. It solved the problem for me!
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Hikari said:
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Click to expand...
Click to collapse
If you need a password, then you'll have to go back to WM5. If you just want a password because you want to protect some files, then you should look into encrypting those files.
I hope that there is some way/there will be some rom to support device lock for Wizard's WM6
some WM6 roms seem to work with password.
I am still on a 'old' rom Wizard Reloaded 1.5 and there I can enable the password without waking up problems.
Just try with any rom, if it wakes up, remove the password. I suppose that's not such a big problem for most of us...you can still use Mobile Justice
I hope someone will find the exact cause (regkey probably) of this waking up problem, so any further roms wont have the problem anymore...
Everytime (since we sprung forward) I sync my phone, my phone clock goes ahead and hour and I need to manually change it back.
Ideas?
Chillin said:
Everytime (since we sprung forward) I sync my phone, my phone clock goes ahead and hour and I need to manually change it back.
Ideas?
Click to expand...
Click to collapse
Active sync has an option to sync the hour with the one on your pc. Check the pc time to see if it differs. Being an option you can disable it.
Cheers
iberico said:
Active sync has an option to sync the hour with the one on your pc. Check the pc time to see if it differs. Being an option you can disable it.
Cheers
Click to expand...
Click to collapse
Thanks but, unselecting sync time/date stops it from changing the time, but it doesn't solve the issue.
Both my phone and my PC are set to the same time and the same time zone. I suspect it is a DST issue, but am not sure how to fix it...
any outcome?
i have the same problem with my softbank x01ht but in the opposite direction.
i have to change the time one hour forward after i have done an activesync.
that is, time on my pc is 8.00 and the time on my softbank is 7.00
how do we solve this ?
Have you applied this Daylight savings time update.
Update for Windows Mobile (KB949168)
http://www.microsoft.com/downloads/...92-3142-4473-B435-B514E4B360A5&displaylang=en
This fixed it for me, I'm in Melbourne.
it worked !
good to see another fellow melbourne user on the site.
thanks for that. it worked !
Good find!
Thanks mate!
Thanks, it fixed my XDA II with WM 6.1 too. Also in Melbourne.
Cheers!
Cab File Wont Install
FSB said:
Have you applied this Daylight savings time update.
Update for Windows Mobile (KB949168)
http://www.microsoft.com/downloads/...92-3142-4473-B435-B514E4B360A5&displaylang=en
This fixed it for me, I'm in Melbourne.
Click to expand...
Click to collapse
I tried to install the above CAB file to my XDA II but it gives me a message
"WMDST2008-1.CAB is not a valid Windows CE Setup file"
Any suggestions?
What about Brisbane, QLD, Aus
Hi there,
I installed the update, but I am still having the problem. It seems to be applying daylight saving time to Brisbane. Any ideas?
I've bee having this problem as well since installing Window Mobile 6.1 (RUU_Polaris_HTC_WWE_3.13.405.0_radio_sign_25.85.30.07_1.59.42.15_Ship). I'v tried KB949168 as well but with no luck.
Is there a set of timezone files/registry entries/table somewhere I can manually edit ?
OK, it looks like you need to add the following registry entry to handle Brisbane
HKLM,SOFTWARE\Microsoft\Timezones\260, TZI,
0x00000001,a8,fd,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
After I did this I reapplied the timezone (changed to sydney then back to brisbane) and reset the time. Seems to all be good now.
Spoke too soon. Half an hour later and it reverted back to daylight savings time
How to stop autosync update of TP clock?
Hi all,
Great resource here. well done
I have been lurking around here for a few weeks and used many of the tweaks/edits which I thank you all for making available. Many hours of tweaking fun to be had..
My issue is small but increasingly annoying, when I sync my HTC Touch Pro to winxp netbook (eeepc901) somehow it adjusts the clock on the TP forward only one hour. (was like this out of the box before anything else I did to it)
I can change the time back after it has synchronised initially and then re-sync from the desktop and it wont replicate it again.
However, when i change the time back and unplug/un cradle then reconnect/sync again it will adjust +1 hrs again.
It doesn't do this on a straight USB data connection.
So I am thinking sync program issue right?
My eeepc and TP both have the same time zones set to Brisbane +10 and my bios is showing the same time. I have disabled the winXP time autoupdate service thinking that might have something to do with it in services.msc to no avail. On the TP I have tried both the settings for timezone update etc.
i have had a poke around in both active sync 4.5 and any TP settings/programs that I can think of with no effect. This has been the only real issue I have had so far, other than that after a few days getting use to this device I am very happy with it
Any help on this is appreciated.
Thanks
Bump!
patiently waiting
Are there settings in either active sync or on the pc or the phone where i can manage the clock update?
I noticed on the phone sync settings i have to uncheck "advanced radio button" to make it detectable on the deksktop.
yeah, it is something annoying with brisbane timezone. there are a few threads here with it. if you search trhough my post, you may find an answer
Brendo said:
yeah, it is something annoying with brisbane timezone. there are a few threads here with it. if you search trhough my post, you may find an answer
Click to expand...
Click to collapse
Ah that be the state gov' not allowing DST right..they say it will make the curtains fade and the cows come in too early for milking, aye but! lol j/k
It seems to only happen on the netbook (xphome sp3) on Sydlney, Tokyo, or even NY time zones, I tried +8 +9 +11 etc zones instead of +10.
I did notice on technet (I think) there was a bunch of timezone updates for windows for some countries recently but no mention of anything for Aus EST at all.. However, on the desktop pc (vista) i cant replicate the issue at all.
Anyway, i will search your posts and thanks so much for the reply, was getting a bit lonely here for a while
Okay, searched and read.
http://forum.xda-developers.com/showthread.php?t=436366
I looked around for a thread that had a compiled list of descovered glitches and stuff for the TP2 and didn't find one, so here we go. If you notice any issues with your TP2 post em, and maybe we can offer solutions, or at least get an idea if it is a specific device issue, or perhaps something wrong with the ROM, etc.
As mentioned in another thread, I have noticed a sms messaging glitch, where if you are in conversation mode and you recieve multiple texts before exiting, you have to exit and enter the conversation 1 time for each text recieved.
Also, I have noticed on multiple occations that the sometimes when my TP2 goes to sleep mode, it will not wake up unless I take out the battery. Those are the two main things.
I have a friend with a Touch Pro, and I also had one before I got the TP2, and I have noticed that both of these issues are on both devices. The touch pro only experianced them after the ROM update HTC released for it.
BTW, I have Sprint CDMA service. I don't know if Verizon users are experiancing the same issues.
I have considering flashing a custom rom to fix these issues if they are ROM specific, but idk if they are.
So, any other issues that anyone wants to share?
To tell the truth, I am not sure what is wrong. It may be a batch issue (a group of phones that all have the same problem). I have the Sprint TP2 and don't have the freezing issue.
I have noticed the issue with the text messages, but I believe that it has something to do with the new integrated Texting tab in the TF3D Contact/Address Book. There is a program on this Forum Called "Safe Inbox Extender" ( at http://forum.xda-developers.com/showthread.php?t=379265 ). If you download it and install it, it enables the "Mark all as Read" function in the Text Messages. Has been a God send.
As far as the other issue, I would suggest that, after a back up of important things of course, that you do a hard reset. See if that fixes the problem. Also, If you have a bunch of 3rd party apps, you might want to install them one at a time, with a little time in between, and see if they are causing the problem. I've fallen into the runt of I know what programs I like and have them stored on my storage card. Just because all my phones have been WinMo, doesn't mean they will all be compatible.
Just some thoughts.
I'll try that program, thanks. As far as the sleep issue, idk if a hard reset would work or not. I accidentally reset it a few days ago when I tried to restore my data profile because my internet wasn't working and it went to the prgramming menu instead and wiped the whole phone. So I guess I'll wait and see if it does the sleep mode thing again. If not then I guess the hard reset did work.
I don't know if Verizon users are experiencing the same issues.
Click to expand...
Click to collapse
I can confirm that Verizon TP2 has same issues...Back it up and Hard Reset! Fixed the problem on my girlfriends and my buddys TP2...Neither issues have occurred since.
I''ve noticed when my phone is on sleep mode for more than 15-20 minutes it won't turn on immediately if i try to use the slider. i usually have to open and close the slider to get the screen to turn on. I've tried a soft reset but that hasn't fixed the problem. I've also had a few programs crash on me already. Any suggestions? Thanks
im on uscellular havent had any of those problems.the main issue i got with the tp2.is the memory usage i do soft reset its between 46-56 pct used. do nething on it like internet or play a game it sits around 80 pct used till i use cleanram or soft reset again.if any1 knows a way to lower the usage plz post it. ty
I have a us cellular tp2 and the only problems i am experiencing is that yeah the memory isnt the greatest but mostly the clock, i set the time zone for us central time and at least 2 to 3 times a day the clock will reset itself to eastern us time its a real pain in the a**. not sure how to fix it as of yet, any other uscc customers having this same problem?
hunter7773 said:
im on uscellular havent had any of those problems.the main issue i got with the tp2.is the memory usage i do soft reset its between 46-56 pct used. do nething on it like internet or play a game it sits around 80 pct used till i use cleanram or soft reset again.if any1 knows a way to lower the usage plz post it. ty
Click to expand...
Click to collapse
hehehehe
welcome to windows phone my brother!!!
hunter7773 said:
im on uscellular havent had any of those problems.the main issue i got with the tp2.is the memory usage i do soft reset its between 46-56 pct used. do nething on it like internet or play a game it sits around 80 pct used till i use cleanram or soft reset again.if any1 knows a way to lower the usage plz post it. ty
Click to expand...
Click to collapse
Why do yo care?
ok sorry let me do that again. i was asking because i have owned the touch, touch pro and now tp2. the first didnt have the problem of using up that much. the pro barely hit 50 and that was with alot open. i contacted htc the told me to call in to tech support. they have a way to lower usage ill let you know if it works.
osito706 said:
I have a us cellular tp2 and the only problems i am experiencing is that yeah the memory isnt the greatest but mostly the clock, i set the time zone for us central time and at least 2 to 3 times a day the clock will reset itself to eastern us time its a real pain in the a**. not sure how to fix it as of yet, any other uscc customers having this same problem?
Click to expand...
Click to collapse
Hey! I had this problem too, but I figured out how to fix it.. Here's what I had to do..
I had to set my time to a local city [Click on World Clock ----> Add City ----> Local timezone city ---> Set My Location, and change your time to the proper one, then set your clock as the other city you made just a minute ago. While the new city is selected, delete it from the list [Menu ---> remove cities] and select your personal location again.
This timme, click on menu ----> Local time settings, and make sure that it says your timezone [Default on USCC for some reason is Central Timezone - Their headquarters]
I have a TP2 from US cellular. It has winmo 6.5 on it. It keeps show i have 1 txt msg. But i don't have any. I installed this cab but i don't see the mark all as read function anywhere.
yeah i also have the tp2 with us cellular and live in central time, but it always goes to eastern time. i called the tech team for uscc and they said that they have never heard of that issue before, but they said that they submitted a ticket for a fix so hopefully they do soon cause its very annoying
my tp2 doesn't have the sleep or time or txt problem, but it does soft RESET itself randomly for no apparent reason, happens 1-3 times a day, reallly annoying......
Hi guys, I got my OnePlus 7 pro at the time of release, and up to now it's been through all of the updates etc. But I have a major problem with using WiFi. Sometimes it works normally, but other times, images won't load, or downloading images from apps such as WhatsApp takes forever. Images such as profile pictures don't load either or will take a very long time. However watching video on YouTube etc is all fine. I'm very confused at to this issue and wondering if anyone else knows anything about it.
Thankyou!
By the way, using mobile data works fine and everything loads properly.
I would recommend factory reset at this point. This beast is fast as hell on wifi. No issues here.
I've also had this issue sometimes. It pops back up every now and then but what fixed it in most apps was going into router/modem settings and make sure that the time(what tells the router your local area's current time) is being controlled by your ISP and not by the internet.
netgar said:
I would recommend factory reset at this point. This beast is fast as hell on wifi. No issues here.
Click to expand...
Click to collapse
Thank you for your response, yeah the 7 pro is a beast, but i doubt that a factory reset would help
shanar585 said:
I've also had this issue sometimes. It pops back up every now and then but what fixed it in most apps was going into router/modem settings and make sure that the time(what tells the router your local area's current time) is being controlled by your ISP and not by the internet.
Click to expand...
Click to collapse
Thank you for your reply, i will try this and see if it works. I'm still unsure about the cause of this issue, and i really hope its not a hardware issue. I never had this problem on my OP3 which is quite sad
I have the same strange problem here ...
hellfire555 said:
I have the same strange problem here ...
Click to expand...
Click to collapse
The strange thing is, if I turn on vpn, it works, but the internet is a lot slower using VPN...