Hello there, my JAMin is acting weird...
the screen calibration goes off every now and then and it's driving me crazy! so I decided to do a fresh ROM update.
I'm using the i-mate offical ROM and I have the file: JAMin_Arabic_213923_2139126_022021_ship.exe downloaded from i-mate site..but I keep getting Error 294: Invaild Vender ID!!
I didn't use any cooked ROM or anything!
tried to re download the ROM file, Updating from Boot Loader, Hard Reset..nothin works!
I want to re-install the ROM, maybe I can get rid of the screen calibration issue!!
anyone has any idea what's going on?
hey people!
any ideas!
talked to i-mate support, but nothin useful they say I need to get my device checked...?
what is the reason that I can't use the JAMin ROM in my JAMin (never used a cooked ROM before!!!)
simply,the rom you are trying to update does not have the same vendor id.you phone is cid locked,and that is the reason.try some other no vendor id rom.
zeroed said:
simply,the rom you are trying to update does not have the same vendor id.you phone is cid locked,and that is the reason.try some other no vendor id rom.
Click to expand...
Click to collapse
my device is 4G and I'm using the i-mate shipped ROM
so it has to work without unlocking, right?
Hi Everybody,
First of all let me thank in advance any help and expertise provided.
So the problem i need to solve is the following. I have the S200 (bought in germany, so it's the O2 XDA NEO), and as soon as i bought it, as it was in german, i managed to flash it with a rom in English (1.5 years ago)
Now, i tried to flash it with a Touch rom (don't remember which. PDA VIET? maybe) and it didn't work and now i'm stuck at the bootload with the current message:
IPL 2.20.0001
SPL 2.20
I've tried several roms and some (apparently) flash but then get back to this bootload screen, others don't flash at all.
Anyone can help me then solving this? I'd like to install one of the Touch roms, if not possible just bring it back to life with any WM5 roms...
Thanks in advance again
Cheers
L
Search for an official WM5 ROM like from o2 or Qtek! Connect your Neo via USB to your PC and start the update process! That#s all to bring your device back to live!
Thanks for the quick reply, but i tried this already but it doesn't work as well. I did somehing to the SPL (i was doing it a bit blindfolded as i'm quite newbie in this) and i think that's why i cannot flash anything anymore, not sure.
Is it normal to have SPL 2.20 (no other digitis after the 20)?
ANd to bring it back to life, do i have to install one of the original roms? can't i simply install the Touch versions?
Thanks again
Cheers
Try a really official WM5 ROM, like from o2 Germany! And when I correctly understand which Touch ROM you mean, it can't be used to recover your Phone!
Ok, tried as suggested but got
error 296
This NBF file cannot be used for you PDA phone. Please newer NBF file
Suggestions?
Thanks in advance
Hmm, also tried with RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
from List of Available Original Shipped ROM Versions, and got Error [300]. This Update Utility cannot be used of your PDA. Get Newer Update utility.
Also tried with this one
RUU_Prophet_220739_2207119_024721_QTEK_GER_Ship.exe
From the same place,
Error [294] Invalid Vendor ID
Help?
find for o2 neo rom, from o2, thats the only way, coz in bootloader u cant bypass CID, so go for google.. or PM me...i willl give u the link!!
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
malhaar said:
or go on the following link.. there is a rar file with no vendor ID.. use that.. u will have ur phone back...
ftp://xda:[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Click to expand...
Click to collapse
thank you for your reply, i tried from that link several roms including this one RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar
No vendor ID. This was the only one that started the flashing process, but stopped at 80% with the error [326] This nbf cannot be used for your PDA phone. Please check your nbf file...
Anyone, tips?
How to proceed. Thanks in advance for the help provided.
Try PDA Viet Step 1
Try PDA Viet Step 1 Temp
hi
my htc prophet got into boot mode too and wondering how to recover it ...does this method I mean full charge with an original charger work for anyone ....can you please what you got by this exiting experiment .
regards
Try this.
If that fails post again but be more specific e.g. what did you do before this happened?
Having the same problem too, try to flash many rom on my 818 pro, but once the process done, it stucks on boot loader screen
can anyone solve this problem? i have the same
but i can install (flash)rom after flash end and prophet restart it stuk on bootloader plz help me
Try and flash the QTEK NVID WM5 AKU2.2 ROM. I'll find a link soon, but I think there's a copy on skyn3ts FTP.
Try this: ftp://xda:[email protected]/Roms...'s/RUU_Prophet_220734_2207114_024721_NVID.exe
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
sorry i can use the link
downloading
saied 1 said:
hi the link dosent work pls help us
more info
i have t-com tc 500 wich before i want to upgrade it ,has prophet touch rom version7
Click to expand...
Click to collapse
That means it is unlocked. Try the ROM I linked earlier just to get the device usable.
hi thanks for yor fast reply but i download the rom that you link and run it in 80 percent of flashing the new rom i have wait few minutes and in device the process bar become red after afew minutes it goes blue(green) and continue but again in 95 percent get red and after minutes i recive the eror that tell : ERROR [320~328] : INVALID COMMAND please chek your nbf file idont know what should i do
and i found this on read me file that comes with rom you linked above
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
my bouth spl and ipl is 2.58.0001
please help me
2.58.0001
Click to expand...
Click to collapse
Never seen that before...
hi does anyone have the official release of orange rom from uk? i can't find it because i want to flash imy phone back on it's own factory settings. thank you
There is no official release of the Orange UK ROM, but I did create an installable ROM from a dump of my Orange UK TyTN II before I started flashing. It can be got from here; http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
thank you... but i m still having same problem with sim lock ....
You flashed a different Radio ROM didn't you.. That Sim-Locks Orange TyTNII's.
Check the stickies for the SIM Unlocker which is what you'll need to do to fix it.. Note that there is no Orange UK Radio ROM available and so you'll have to flash a different one.
I'd dump mine but:
a) It wont be the version you had anyway's as I seem to be the only person with 1.27.14.32 on Orange UK..
b)I've not actually seen a way to rebuild the Radio ROM even if I did dump it.
oh... finaly... unlocked... now i guess i can flash what rom i want?
sambartle said:
I'd dump mine but:
a) It wont be the version you had anyway's as I seem to be the only person with 1.27.14.32 on Orange UK..
b)I've not actually seen a way to rebuild the Radio ROM even if I did dump it.
Click to expand...
Click to collapse
No no no, I had (ephasis on had) that rom and really need a dump of it. I know I cant easily reconstruct into a flashable rom but I'd like to have a dump to be able to play with ready for when one of the brain boxes on here comes up with a solution for reconstructing a dumped radio.
So... do you still stand by your offer to dump your radio? I'd be ever so grateful
robertocarlo2oo7 said:
oh... finaly... unlocked... now i guess i can flash what rom i want?
Click to expand...
Click to collapse
You can indeed flash anything you want
Hey guys, about 10 minutes ago, i noticed that the start button for my phone acted weirdly. It is appearing and dissappearing as if someone is touching it, but the phone is flat on the ground. My fingers are not touching the screen yet the phone is acting as if someone is pressing the screen. After reseeting it, the touch screen went dead. I can navigate with the dpad but not when i press the screen. So i believe it is time for me to send the phone for warranty.
I am from Malaysia by the way.
MY phone is currently flashed (hard-spl) and am running on Topaz Rom. I have also installed the custom boot screen (bios) made available here by a forumer via hard-spl.
My question is, how do i remove the hard-spl and the boot screen that is flashed by hard-spl?
Also how do i remove everything so the phone will qualify to receive the warranty?
I do have the stock ROM but i believe i need to do more than just re-flashing the phone with a stock ROM to claim warranty.
well flashing the stock rom should be the first step. then you have to find the original SPL. someone on here will help you with that, I'm sure.
ok here is what i did when i sent my phone in for HTC warranty in the US:
1) Flash stock radio or any latest radio from your area (if you remember the number of the radio that came with your phone find it here: http://forum.xda-developers.com/showthread.php?t=439566
2) Then flash the stock ROM.
3) Then flash the stock SPL (Find your here http://forum.xda-developers.com/showthread.php?t=499791 then follow instruction bottom of first post here: http://forum.xda-developers.com/showthread.php?t=410150
Then check to make sure you have the right radio and go into boot loader to check spl
Thanks for the suggestion jaszek.
And Thank you very much ptyindian for providing the steps , which is quite easy to read.
About the radio, i don't think i have to flash the radio since the official latest ROM that comes from HTC's site already contains a Radio. So i am safe here right?
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
. Also , what is the difference between the above 2 and this one :-StockSPL_ForWarrantyOnly_SPL190_1.zip
Yes if you installed the latest rom that was release by HTC and it has a radio included then you are safe about the SPL i am not sure which one you need to flash but i think the spl1.90 was what came with the ATT fuze i think or atleast that is what i had. Maybe some one else can help you more with the exact details on which SPL you need or you can post in the SPL thread and see if some one helps you.
Hello All,
A friend of mine bought a ChaCha from Australia and it doesn't support arabic. I downloaded the arabic stock ROM somewhere from the forum but can I install it on that phone so that it will support arabic?
The phone has a different software number than that of the ROM.
And if yes, is there any special way to install it like extract and flash it using fastboot or just double click and continue with the wizard?
Thanks
The only way you would know is if you try it! I'm assuming you have the .exe file? I have never used an exe. However I was able to flash Superdroid 1.0 onto my US version phone through ClockworkMod recovery after getting the zip file. And Superdroid is not based on a US rom (I believe it is UK? don't know)
So I could imagine you being able to flash an arabic Rom onto the phone.
Yeah, I thought I should give it a try too. I will download the Australian ROM just in case.
Thank you.