Hello,
I am using Windows Mobile 6.1 on HTC DIamond, but I think this is the same on windows mobile devices. When I use application that needs internet connection, data connection is established. When I close this application, daa connections reamin established. Is there any way, that data connections will automatically disconnect when application is not needing internet anymore.
Any idea?
Hello,
I found working solution on http://www.andrewsayshello.com/windows-mobile/auto-disconnecting-idle-data-connections-in-wm6/
Regards,
ROk
Related
Hello Everyone,
When we connect WM phones over Active Sync, we are able to run internet on WM Phone through desktop's connection.
So, I have this old XDA Stealth with me, and I thought of using it as a Wireless Router for sharing Desktop's Internet Connection with Laptops and other WiFi Devices.
Upon using WMWiFiRouter, I'm getting error saying there is no connection defined. That's right because I don't have any data plan and no modem has been defined.
So how can I share my desktop's internet connection with other devices using WM Phone as a Wireless Router (wherein the only way for WM Phone to access internet is through USB Cable and Active Sync).
I would appreciate any help.
Thnx
Sonny
In other words I wanna share Desktop Pass Through Connection over WiFi.
Please help, ain't there any way of doing this?
In other words, you want to share your internet connection that came from WM Wifi, to desktop computer,.
or
You want to sharre your internet connection that came fro your desktop wifi, to your WM device?
Do you want to achieve something like:
Internet->Computer->wired link->WM device->Wi-Fi->other devices
which if it's not possible in WMWifiRouter seems an oversight, and one which the development team may want to know!
Thats right! Its this way.
Cable Model >> Desktop >> Active Sync >> WM Device >> WM Device's WiFi >> Other Devices.
Ain't this possible, if I try forwarding Active Sync's IP?
Here is what I tried,
I configured WM Phone's WiFi's IP add to 192.168.0.1.
Next I got the connection detected on my laptop and pinged the IP and got the reply, but was unable to access internet. Guess ICS was not enabled.
Now how can I forward the IP for Activesync to be used as a gateway to access internet on the laptop through the WMPhone.
i have the same problem as the thread starter here....want to use my old pda2k as a wifi router for my e71...pass through works on pda2k but wmwifirouter doesnt work!
worked follow exact instruction on this page!
http://support.wmwifirouter.com/documentation/41/USB_to_Wifi
Hey Thnx!
I got it working!. But the range and speed sucks!
Is there any way of increasing the range of WM5 device's WiFi interface?
I'm planning to plug a wire to the WiFi antenna and connect it to an aluminium sheet which would be like a parabola covering one side of the phone, hope this would work well.
I would appreciate any suggestions.
Hope the title says everything about my problem.
HTC P3452 (ELFIN) using a custom 6.1 ROM(with the default MS BT stack)
Windows XP Professional SP3 using Widcomm BT stack
UTSTARCOM router to connect to the internet.
My problem:
I want to use bluetooth as the primary medium of connection between PC and PPC .
By 'connection'; I only mean efficient file sharing and internet connection sharing (only from PC to PPC; not the other way round; 'cause I don't have a GPRS/EDGE data plan on my PPC)
MS Activesync does both of these (but not very efficiently) , and there are a lot tutorials on how to connect PC and PPC using Bluetooth and then sync them using Activesync. But as everyone knows, being the crappiest software ever Activesync often auto-disconnects, even if the PC and PPC are still connected by bluetooth .
Using the ready-made solutions provided by the Widcomm Software, it's very easy to share files, as the MS stack supports FTP.
The Widcomm software also offers a service named "My network access" and creates a Bluetooth LAN connection on PC; and those were supposed to be able to establish a LAN connection between PC and PPC over Bluetooth, but it doesn't .
(The MS BT stack of Windows Mobile doesn't enable PAN by default. I used a hack by some user of this forum (wm6btpan) . But that doesn't seem to solve the problem either, although it enables me to use my PPC as a remote control.. )
So at this point, I need your help in establishing the connection between the PC and PPC so that the PPC can use PC's internet connection. For the last 1.5 days I have searched nearly hundreds of resources but nowhere found a complete solution working for a HTC Touch. If , with your help ,I can get my setup going, then I promise to put up a full fledged tutorial on how to do this...
Hoping early response..
Bst0602
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
read this?
as I ve already written , I 've already gone through hundreds of threads in different forums, and it was definitely one of them.. the last few instructions
are..
# Tap the Bluetooth icon and tap the link saying <u>Bluetooth Manager</u>.
# Tap the starred Bluetooth icon.
# Tap the Join a personal network.
# Select Join a personal network option and tap Next.
# After your Connection Wizard sees your computer, select it and select Finish so that your HTC Creates a shortcut for this connection named Network with '?InsertYourComputersNameHere'. Please note that there is no need for a secure/encrypted connection.
# Double tap or hold and select Connect to the Network with '?InsertYourComputersNameHere' to make a connection with your access point.
# At this point or later, your HTC will ask you if this connection is a Work or Internet connection. I have chosen this as my Work connection.
But in HTC TOUCH there is no "bluetooth manager" or "join a personal network option" (probably they were in WM5). So this wiki doesn't help much..
anyway thanks for your response.
no one else interested ?
hey.. forum veterans.. please respond...
still no one ?
forum mod, can u please move it to the elfin forum ?
Yesterday i updated my HTC Touch Diamond to Windows Mobile 6.5.... i wish i didn't do that! I use BSB Unlimited Rom and now my WIFI doesn't work.
My cell finds the wifi connection and my home network. It even connects. But when i want to start MSN Messenger, Oprah, Internet explorer, it doesn't make a connection!
With Windows Mobile 6.1 i've never had troubles connecting
I hope someone can help?
Hi didn't know where this question would fit in i hope someone finds it. (noob to xda-developers )
the problem:
when the wm5 pda has no watchguard vpn client installed all networking works fine and system doesn't crash.
with vpn client installed
1. wifi comes up with "dhcp server could not be contaced. using cached lease information"
2. usb connection to activesync fails to connect doesnt even pick it up or make any sounds on device or pc.
3. system randomly crashes with device.exe crashed send error report bla bla.
4. bluetooth seems to funtion ok still
symtoms go away once vpn client uninstalled
i need some help on configuring the software before installing on device basically but i cant see where i'm going wrong, i'm guessing its a firewall issue in this software as its the networking connections that are having problems, before crash occurs randomly. link to software for reference.
cant post link but google ncp vpn windows mobile trial
Note. the standard windows mobile vpn connection works fine however theres to many clicks and the connection is to easy to delete as "delete" is right next to "connect" when you go through manage connections.
if there was a one click way to start the vpn connection like or script or something i could then assign that to a shortcut button.
Background info:
I have a unitech PA500 PDA with laser scanner bluetooth and wifi, reps of the company need to send orders collected back to base easily,
Using xp sp3 pc with activesync 4.5 and usb data cable or bluetooth connection.
the watchguard client installer for wm devices, has firewall profile settings and this is set to off other choices are: off with rules to deny or: on with rules to allow.
i have a watchguard edge x750e firebox firewall at base and have all the relevent software to install the watchguard windows mobile ipsec vpn client Built on (NCP Secure Entry Windows Mobile Client) compatible with wm5/wm6
link to trial software of ncp version if anyone wishes to see the configuration options available to me.
cant post link but google ncp vpn windows mobile trial
i have setup the profiles for connection using the wizard on the main watchguard edge firebox, configuration user password etc. all tested ok as it has worked on these devices using the bluetooth connected to mobilephone 3g internet. but as described above all other connectivity has problems
i have 3 scanners one of which has been reflashed with the lastest wm5 rom
(this one seems to be more prone to crashing than the others)
available on the unitech website the other tested as they are original rom i don't know how to check if the one on the website is newer than the preinstalled version.
i have the the PDA's preconfigured to use Blackberry 3G network via bluetooth as the internet connection
i have a watchguard edge x750e firebox firewall at base and have all the relevent software to install the watchguard windows mobile ipsec vpn client Built on (NCP Secure Entry Windows Mobile Client) compatible with wm5/wm6
Using xp sp3 pc with activesync 4.5 and usb data cable or bluetooth connection.
the watchguard vpn client is very simple when it doesnt crash the device
any help would be greatly appreciated.
Mark.
you could call Unitech's support
Mark,
I'm in Unitech sales. Could you could call Unitech's support team at 800-861-8648 to get some advice?
James Shipley
Hi James
thanks for your reply, is that a UK helpline?
Mark.
Ps. i just sent a message to Tuan i believe he tried to post?
I wonder if anyone knows any application to enable the 3G/GPRS connection on windows 6.5 phone?
I developed an application in Java (J2ME) which get information from a database but when I try to connect to the server for the 3G/GPRS data connection is not active. So, I start IE to establish the connection and after that my application can connect normally.
This problem does not happen when using WIFI.
Thank you,
Lucas