hello
I have K-jam and I have 2 problems.
First : when I flash WM6.5 , start menu does not start after a couple of minuets of flashing the new rom. I have tries 6 copies of WM6.5 from this forum but the same result every time.
Whow can I fix this bug ? pleas help. whithout start menu I can not use my K-jam
Second problem: I have arabizer suite for my device and it works fine with WM6.1. however when I flsh WM6.5 and instal Arabic language , the external key boar either stuck or does not write in Arabic.
note: I am using the same Arabizer suite from Imaginet for WM6.1 and it works fine but with WM6.5 it does not work.
I have tried lots of Arabizer Suites and all of them fail.
please help. I like WM6.5 from this forum but I cant use it because of these problems.
can u tell about your device g4 or g3? radio and spl? and which rom??
my K-Jam details
My PDA is
K-Jam G3
SPL 3.08
Radio: 2.07.10
Roms:
1- XDA2_s_WM6.5_v4.1
2- MSD-Wizard-WM6.5-23071
3- Manila2D_Black_V14_WWE
4- X2H_WM6.5_M2D_v2.5 Manilla interface
5- XDA2_s_WM6[1].5_v2.5
6- XDA2_s_WM6.5_Build_21234_CLEAN
I have downloaded the above copies from this forum and they all have the same probem.
please help
hmmm ok now again flash X2... win 6.5 without memory card and after flash when coustomization will start u just softreset by your styllus
link is in post 5
http://forum.xda-developers.com/showpost.php?p=3459147&postcount=6
from above link u can download the rom
I will try and let you know
thanks
the same problem
your solution did not work with me
thanks alot
any other solution?
please
up
please help. I still can not use WM6.5 on my K-Jam because of start menu
help
after flashing the rom intal this cab
salooo said:
after flashing the rom intal this cab
Click to expand...
Click to collapse
thank you for trying to help me
but where is the cab you mentioned?
sorry i forgot
I have solved the problem
I have installed SPB Home immediatly after I flashed the rom
the start menu now works fine with me
this is day 5 of using WM6.5 and every thing is good
thank you salooo for your cooperation
Related
Hey !
Currently i have the Smart1 WM6 Rom installed which i think work great ! But i need to be able to charge my phone when its turned on so i have to go back to WM5.. So.. Can anyone tell me what i need to do to go back to WM5 ? Do i need to do any special things?
Thanks !
~D
Da9L said:
Hey !
Currently i have the Smart1 WM6 Rom installed which i think work great ! But i need to be able to charge my phone when its turned on so i have to go back to WM5.. So.. Can anyone tell me what i need to do to go back to WM5 ? Do i need to do any special things?
Thanks !
~D
Click to expand...
Click to collapse
*..sigh
read the wiki/use the advanced search function.. it's been explained a 1000 times. but allright..
- Just flash back to an AKU2.2(NoVendorID)-ROM (either Jesterz's or the one from smart1's thread)
Do this by entering bootloader (holding down camera-button and reset with stylus), pluggin in the USB and executing the *.exe on your PC.
- When flashed back to AKU2.2, you can flash any AKU2.2/2.3/3.3/WM6-ROM you want, as long as you read the install-notes of that particular ROM.
grtz
Hi people! First I want to thank all of you that make a great job on helping and cooking all of these apS for our prophets.
I've looked in the others post for my problem and tried out all of methods explained but nothing helped me.
My problem consist on the boot of my S200. After i made an upgrade to WM6 it stays blocked on the first boot ( QTEK Image ) and stays there until battery goes down. I tried tu upgrade others ROM's by tho BOOTLOADER way but it doesnt work. So I'm completly bypassed by this problem.
If anyone have a solution please post it.
Regards
which roms? ipl spl versions,device model?
Qtek S200 (alias Orange SPV m600)
ipl 2.10.0001
spl 2.20.0001
I first upgrade to WM6 cooked by GULUM, i found it here.
When i wanted to upgrade another version but it doesnt function, until i found Crystal v4.
And now my machine wan't boot, it stays on Qtek screen.
I have the same problem...
Fict it, just installed an older ROM and my htc works again. Gonna try to install a newer ROM now.
TmKing, can you explain your method and the you ROM you used ?
Thank You
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
This also works
TmKing said:
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
Click to expand...
Click to collapse
Have a look to the post 1 in my signature link~~~~~
Enjoy!!!!
Hehe, yes, indeed, I wanted to do everything verry fast. I wasn't aware of the new method to upgrade my HTC.
If you follow the appropriate steps, you will not have this boot problem.
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
used sspl for change the SPL,or used the 3.28 pathed HSPL.
Ok
Thank you for your ansmer.
But the SSPL 3.28 is not oldest than the origial rom: sspl 3.29???
I don't no
If you read the post you would see they are the exact same internally so it will work just fine for you.
Tell me what's the version of SPL on your Kaiser now?
If the cprog.exe error causes freezes, just reflash the ROM, changing SPL won't help you out of sh!t.
The Version of SPL is 3.29.
I have reflashed the rom 5 or 6 time, and the sames problems.
cannot update my htc p3400
can u help me to update my gene. i have try my best but after the screen goes white it shows no moblie connection & mobile hangs.
I had the same freezing issue on my Kaiser - Official Norwegian 6.1 ROM. I was so fed up with this, so I flashed Leo's V6 ROM with SPL 3.29.
Now I'm a very happy man
Highly recomended ROM / SPL
The Doc.
mans said:
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
Click to expand...
Click to collapse
mans said:
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
Click to expand...
Click to collapse
I have been running HTC WM 6.1 Spanish, with HardSPL 3.29 and radio 1.58.25.17 for a while.
Does that error appear before loading any software on the phone?
Does it appear when doing something in particular?
I only found an application giving error and it was GSplayer when accessing MIDI plug-in options.
OK SO I UPGRADED MY IMATE K-JAM ALSO KNOWN AS THE WIZARD FROM WM5 TO WM6 WITH NO PROBLEM ,ITS JUST THAT I CANNOT RESTART IT NOW ,IT JUST HANG ON THE WINDOWS WM6 SCREEN BUT IF I HARD RESET THE WIZA IT GOES ON AND ALL ----ROM VERSION IS:2.18.0.0WWE
FARIA V5.0
G4
IPL AND SPL STILL ALL GUD
WOT NOW HOW DO I FIX THAT
HIT ME BCK ON MY MAIL ASWELL PLS GUYZ
[email protected]
What??????????
Men i dont understand nothing you have said, jeje does you speak spanish, russian or something cause your english is uuuugly! so if you want an answer check it here.
So repeat all and slowly please.
First thing, you need to install HardSPL before flashing non-carrier ROMs in your Wizard.
Secondly, DON'T USE ShellTool to flash any ROMs now! After installing HardSPL, you can just use RUU to flash any ROMs without IPL/SPL.
What you need to do now is to use the original ROM for your device to get a working OS, then install HardSPL.
Splash Screen
THANKS FOR THAT AMN ,,,,,,BUT THIS IS WHAT I DID
THAT Softreset thing thats wot i did flashed it with crossbow reloaded and im happy its working fine
oh and my english its fine bro
Course...
But your post is out of the right place... nice to have people that answer wherever... just to help... but makes this awsome and big forum to read!!!!!!!!
Hello,
I have juz download the NBH file for WinMo6.5 for Touch Viva.. can any one tell me extactly how to install this stuff...i googled a lot...but din't get any straight info...i only have the 28002_ruu_signed.nbh file.
Thank You.
Welcome aboard
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Opal
you´ll find all you need.
Good luck,
Thank you
thank you...let me check..today on leave...so got enuf time to upgrade my Viva
no luck
nop man...i found nothing there about how to install an .NBH file...it juz gives the product spec and diferent ways for resetting the device.. wht i am looking for is a step by step info on how to upgrade my ROM using this RUU.NBH file...any help??
Have a look here:
http://forum.xda-developers.com/showthread.php?t=441870
And then here:
http://forum.xda-developers.com/forumdisplay.php?f=444
Hope it helps,
Thank you again
i have download the CustomRUU tool..thanks...one more question..the tool shows tht my existing version is 1.35.xxx and the image version to that i have downloaded is 1.27.xxx..
is tht a problem..i am having WinMo 6.1 Pro on my device..and this downloaded image file is WinMo 6.5.
error
n now i got an ERROR 270..says the image is corrupted...i tried download 3 times...nething like the device is locked or somthing...whn i turn on my device..its show ONBL, SPL and OS version 1.35.0000
did you Hard-SPL your Opal before flashing with custom roms?
http://forum.xda-developers.com/showthread.php?t=446446
still confused
hello,
thanx for your support. But can u give me a brief about the flashing processes..i mean the SPL and hardspl and bried step by step info..plz..
Thank You
Razeen Abdulla
flashing is quite easy, after connecting via ActiveSync... double click ROMUpdateUtility.exe and follow the on-screen directions... that's it.
if you want custom roms, you have to Hard-SPL your device first. you won't be able to flash your device with custom roms (cooked) if it's not Hard-SPLed but you can flash it with NON-custom roms (roms that are downloadable from HTC websites).