OK SO I UPGRADED MY IMATE K-JAM ALSO KNOWN AS THE WIZARD FROM WM5 TO WM6 WITH NO PROBLEM ,ITS JUST THAT I CANNOT RESTART IT NOW ,IT JUST HANG ON THE WINDOWS WM6 SCREEN BUT IF I HARD RESET THE WIZA IT GOES ON AND ALL ----ROM VERSION IS:2.18.0.0WWE
FARIA V5.0
G4
IPL AND SPL STILL ALL GUD
WOT NOW HOW DO I FIX THAT
HIT ME BCK ON MY MAIL ASWELL PLS GUYZ
[email protected]
What??????????
Men i dont understand nothing you have said, jeje does you speak spanish, russian or something cause your english is uuuugly! so if you want an answer check it here.
So repeat all and slowly please.
First thing, you need to install HardSPL before flashing non-carrier ROMs in your Wizard.
Secondly, DON'T USE ShellTool to flash any ROMs now! After installing HardSPL, you can just use RUU to flash any ROMs without IPL/SPL.
What you need to do now is to use the original ROM for your device to get a working OS, then install HardSPL.
Splash Screen
THANKS FOR THAT AMN ,,,,,,BUT THIS IS WHAT I DID
THAT Softreset thing thats wot i did flashed it with crossbow reloaded and im happy its working fine
oh and my english its fine bro
Course...
But your post is out of the right place... nice to have people that answer wherever... just to help... but makes this awsome and big forum to read!!!!!!!!
Related
Guys i did a very stupid thing this evening. I flashed my Imate Jam using the MAupgrade_No ID and the Greek Qtek firmware.
The flashing was good but now my Jam cant go pass the first screen and continuously reboots. It says something about illegal rom used....and reboots
Any solution to bring back to the former situation?
Please respond...i am really desperate
OK i figured out how. On my panic i couldn't even think.
God Bless the "search" button!!
But how could i get past this problem with the greek version qtek rom? It is locked and although it lets me upgrade (using the No-ID) on the first reboot after flashing it rebbots all the time.
Any ideas?
Thanks
Yep proteus3000uk,
Get yourself a shipped rom from your own provider. Put your magician into bootloader (camera & power & softreset until it reads serial or usb, there will be no backlight) uncheck usb in the connection settings from activesync on your PC & connect usb. Now it will read usb. Start the shipped rom program.
Or download a dumped or Big Storage rom & follow sd-card
flash method including the copy of your id from (first 420 bytes or so from your own romdump).
Or send it back and pray/beg for warrenty.
First two options are preferred off course. I 'repaired' mine with the first option, while I only had a black screen. So no OS or whatever on the rom.
Goodluck, M
Well i think that the Greek Qtek ROM is the only ROM worldwide that is edited from its programmers to run a phone version check, even after it lets you install it on your phone.
If it finds a phone version other than Qtek (in my case Imate Jam) the phone cant get past the initial splash screen and keeps rebooting for ever!
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
oltp said:
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
Click to expand...
Click to collapse
The original english tom (WWE) works just fine (as it should anyway). The thing is i was trying to install the qtek GREEK rom in order to have proper Greek on my phone.
Unfortunately the suckers have locked the greek qtek rom and they have compiled the actual lock into the rom itself.
Although the rom is installed just fine using the No_Id prog, at the first reboot the phone hungs and then reboots for ever!
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
oltp said:
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
Click to expand...
Click to collapse
If you check my second post you will see that i figured out how to revert back to my original ROM just fine.Som bo prob with that.Please READ before you post.
Thanks
Hi all!
I really want to get start using WM6!
I have read almost every topic on unlocking and updating it to WM6,
and still it aint clear to me.
I need first of all unlock my G3 device, i've triest lokiwiz serveral times,
but everytime i get an error with a still CID locked device...
Could please someone give some clear information on how to unlock it, and witch WM6 rom i can user?!
Really thanks in avance!
http://forum.xda-developers.com/showthread.php?t=298613
Thanks for the fast reply.
I used that guide serveral times but with no results....
And why u want to cid-unlock phone?? U can flash it anyway with shelltool.
Just use the rom for wizard.
shell tool on an G3 device?!
Yeah?!!?
With this tool and my instruction you could:
1) Get info about ROM
2) Extract only OS from whole nk.nbf
3) Flash this OS to your G3/G4 CID LOCKED Device (even wm6 rom or latest aku 3.3 rom).
In atachment there are:
1) ShellTool.doc - instruction. Read first and please, follow it step by step!!!
2) ShellTool.exe with some other files that it need
3) Cert_SPCS.cab/EnableRapi.cab - should be installed on your device
etc...
Do you have a link for me?!
http://forum.xda-developers.com/forumdisplay.php?f=248
Then u go on
G4
Especially for G4 models.
and the 1st topic is 4 u.
http://forum.xda-developers.com/showthread.php?t=293480
And ofcourse.Please, read all the sticky treads. They are very very usefull and u can find the answer quicker, than posting the questions here.
have a nice day
Thanks, i already found the link.
I'm a little bit afraid to mess up my device...
Is it very riskfull to flash it with shelltool?!
Hard to tell. This mda is my 1st win mobile device and when i flashed it 3 weeks ago i was also nervous. But if u will follow the steps in tutorial, nothing bad will happen. If something go wrong, just get the phone in bootloader mode and try flash again.
I was especialy nervous, when i flashed t-mobile rom to nbd and the phone didnt start up. It just show the 1st picture ips/spl, when u turn the phon on and here stoped.I was really pissed offf, why the hell was i flashing the good working phone. heheheh But, when i after 25 min. (cause, the buttons in 1 tutorial didnt work) got the phone in bootloader mode i was really happy. This mess happen again 1 week ago, but i knew how to operate.
Close all AV, msn, adaware etc.. and flash it.
Today i will flash my g4 with nbd 8.2 8mb pool. This version, whic i have now, with 6mb is very slow. Dont know why, but the phone is unusefull. nbd 8.1 and 8.0 worked flawless compare to 8.2 6mb. ?????? Can anybody explain that??
----------------
i am sorry for all vocabulary and ~tense~ mistakes.
Is the [final] - Wrcx 5.2.1437 a good one to try out?!
I cant tell u that. Dont have experiences. I try only NBD roms.
U have to know g3 or g4, cid-lock/unlock ...
ipl/spl musn^t be included in rom , etc...
Read the treads about upgrading.I am a real noob in win mobile upgrading and all the stuff connected.
For a noob your talking very expert
Please give me a simpel guide for installing NBD v8.2 ?!
Thanks m8!
I have a G3.
IPL 2.21
SPL 2.21
OS 2.21.25
Yihaa, i've got the Wrcx 2 working, damn its hot!!!
Does anybody knows how to user TouchFLO?
Ive got it, i have to press the voicedial button, but after using it, it automaticly shuts down again, so i have to press the button again?!
U got it!!
Are u talking about commanager?? Pres touchflow and then slide to the right or left. U close the "cube" if u slide up. To open the cube u have to press the touchflow and slide again. work perfect.
Another great release is iphone contactmanager. works perfect and it looks even better. http://www.savefile.com/files/970745
Hi people! First I want to thank all of you that make a great job on helping and cooking all of these apS for our prophets.
I've looked in the others post for my problem and tried out all of methods explained but nothing helped me.
My problem consist on the boot of my S200. After i made an upgrade to WM6 it stays blocked on the first boot ( QTEK Image ) and stays there until battery goes down. I tried tu upgrade others ROM's by tho BOOTLOADER way but it doesnt work. So I'm completly bypassed by this problem.
If anyone have a solution please post it.
Regards
which roms? ipl spl versions,device model?
Qtek S200 (alias Orange SPV m600)
ipl 2.10.0001
spl 2.20.0001
I first upgrade to WM6 cooked by GULUM, i found it here.
When i wanted to upgrade another version but it doesnt function, until i found Crystal v4.
And now my machine wan't boot, it stays on Qtek screen.
I have the same problem...
Fict it, just installed an older ROM and my htc works again. Gonna try to install a newer ROM now.
TmKing, can you explain your method and the you ROM you used ?
Thank You
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
This also works
TmKing said:
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
Click to expand...
Click to collapse
Have a look to the post 1 in my signature link~~~~~
Enjoy!!!!
Hehe, yes, indeed, I wanted to do everything verry fast. I wasn't aware of the new method to upgrade my HTC.
If you follow the appropriate steps, you will not have this boot problem.
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
used sspl for change the SPL,or used the 3.28 pathed HSPL.
Ok
Thank you for your ansmer.
But the SSPL 3.28 is not oldest than the origial rom: sspl 3.29???
I don't no
If you read the post you would see they are the exact same internally so it will work just fine for you.
Tell me what's the version of SPL on your Kaiser now?
If the cprog.exe error causes freezes, just reflash the ROM, changing SPL won't help you out of sh!t.
The Version of SPL is 3.29.
I have reflashed the rom 5 or 6 time, and the sames problems.
cannot update my htc p3400
can u help me to update my gene. i have try my best but after the screen goes white it shows no moblie connection & mobile hangs.
I had the same freezing issue on my Kaiser - Official Norwegian 6.1 ROM. I was so fed up with this, so I flashed Leo's V6 ROM with SPL 3.29.
Now I'm a very happy man
Highly recomended ROM / SPL
The Doc.
mans said:
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
Click to expand...
Click to collapse
mans said:
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
Click to expand...
Click to collapse
I have been running HTC WM 6.1 Spanish, with HardSPL 3.29 and radio 1.58.25.17 for a while.
Does that error appear before loading any software on the phone?
Does it appear when doing something in particular?
I only found an application giving error and it was GSplayer when accessing MIDI plug-in options.
i have installed 2.03 Rom on my Jam it works nicely but i want to try wm6 Black when i try to install it dont work Jam dont go to installeing mode and pc dont recognize the device help?
Please post a URL to this ROM you are talking about, because there isn't such a thing as WM5/6 for the Magician.
wwe 2.03 Htc fo rmagician
i installed this ROM from the same forum but now no ROm works on my jam the installers says failked to recognize the device jam restars and dont go to bootloader mode itself when i try to do it manually it dont work
i installed this rom from here
http://forum.xda-developers.com/showthread.php?t=322110
Your case, will need a bit more thought, on my part.
I hate 2.03wwe, I can't change rom long looooooong ago.
It is still the best attempt so far for cooking a ROM to look like WM5/6
but some things are kinda annoying about it...
like TotalCommander, and that Russian cab tools thing...