Hi masters!
I'm murilo, and i'm braziliam! So, my english is soso.....rs
Well, i brick my kaiser TyTn II when i was installing "V9" Rom.
He only start on tricolor Screen!
This is the information on Screen at tricolor :
KAIS120
SPL-1.94.0000
CPLD-8
my computer Recognizes the USB connection with my HTC, and on screen of my phone appear "USB".
I can't use mtty application because appears "USB port can not open" using USB port.
Help me please, masters!
I need my phone!
Thanks!
Murilo Costa
Have you installed HardSPL? If a rom didn't succeed you can (Normally) just reinstall another rom when your in the "USB Display".
-Armazia
costa.murilo said:
Hi masters!
I'm murilo, and i'm braziliam! So, my english is soso.....rs
Well, i brick my kaiser TyTn II when i was installing "V9" Rom.
He only start on tricolor Screen!
This is the information on Screen at tricolor :
KAIS120
SPL-1.94.0000
CPLD-8
my computer Recognizes the USB connection with my HTC, and on screen of my phone appear "USB".
I can't use mtty application because appears "USB port can not open" using USB port.
Help me please, masters!
I need my phone!
Thanks!
Murilo Costa
Click to expand...
Click to collapse
This is posted in the wrong section and has nothing to do with rom development. This is not the " help me I screwed up my phone because I can't be bothered to read " section.
You have jumpspl on your phone, not hardspl. Flash your original stock rom back on your phone and then read " rom flashing for noobs " in it's entirety from the above stickies, before you really do " brick " your phone.
Please take your time to read threads before you go ahead with flashing a ROM.
[Resources] Flashing Your First Kaiser Rom (For Noobs)
To get out of the situation you are in try and flash stock ROM while in bootloader.
If you are still stuck use this thread:
Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here
In future search before posting new thread.
Thread locked.
Related
Hi guys,
anyone that can give me full step by step solution will be my personal god and i'll donate.
I tried flashing hard SPSL and its gone wrong.
I have a T-Mobile Vario III ( bought 8/02/08 )
I get up to the tricolour screen - with white at the bottom and this is what it says.
top left corner: RUUNBH
Right: KAIS130
SPL-1.56.0000
CPLD-8
At the bottom on the white it says 'serial' when the USB is plugged in it says USB.
Ive tried alot of things ive read now im stuck here.
please help.
C
so u're up to the tricolor screen......unplug and replug the cable, then hit enter
ok it takes me to the current info about your pda
image version :
select from below
update button - update current rom version
or cancel
I you don't get it done PM me & I'll walk you through Harspl thru Jumpspl.
Although with Display Driver 1.56, you shouldn't have any issues.
GSLeon ive pm'd u.
thanks
If HardSPL is not installed but you can get to the boot screen then flash your original rom back! You can find a list of available original roms in the wiki, just make sure that you take the same operator (HTC, t-mobile,...) & the same language.
After flashing it back you should be able to use your phone again, then install HardSPL and flash any custom rom if you want.
Let us know how it goes...
Kaiser (official English WM 6.1)
While trying to HardSPL stucked on some kind of error that is not reslved yet in this forum.
After CustomRUU program, now when i turn on my device i see tree color screen with
RUUNBH
KAIS130
SPL-3.28.0000
CPLD-8
and if USB is connected it shows
USB
I tryed almost every solution in this forum, and nothing.
When customRUU says that this process will take 10 minutes I see 0% and nothing else. then communication error on program.
official Update(RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship) says Inavlid Vender ID.
Please help me to solve this. and get back my TyTN.
hammer_xda said:
Kaiser (official English WM 6.1)
While trying to HardSPL stucked on some kind of error that is not reslved yet in this forum.
After CustomRUU program, now when i turn on my device i see tree color screen with
RUUNBH
KAIS130
SPL-3.28.0000
CPLD-8
and if USB is connected it shows
USB
I tryed almost every solution in this forum, and nothing.
When customRUU says that this process will take 10 minutes I see 0% and nothing else. then communication error on program.
official Update(RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship) says Inavlid Vender ID.
Please help me to solve this. and get back my TyTN.
Click to expand...
Click to collapse
There is a Solution to this in the Sticky above where you posted.
Trust me, I wrote the guide
Link here: http://forum.xda-developers.com/showthread.php?t=423486
Ta
Dave
Please post all problems about SPL issues in the SPL threads.
Thread Closed.
I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS
by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.
What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!
Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks
hi, guys, i tried to unlock a kaiser with htc all unlock 1.2, and in the pass number 3, show me an error, and put the screen black, when i conect to sync, it shows conected, but the screen is black, if i pull out and in the battery, and turn on, shows the att and 3g logos, and then again the screen turns black.
please if somebody can help me, i'm new with htc, but it shows this:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
Thanks in advance for you help.
it is getting worst, i did a hard reset, and now when i conect to my computer, ask me for "generic rndis drivers", last time i solve this from the phone, but now it has black screen.
Please i need yor help.
thanks.
cellshop2 said:
hi, guys, i tried to unlock a kaiser with htc all unlock 1.2, and in the pass number 3, show me an error, and put the screen black, when i conect to sync, it shows conected, but the screen is black, if i pull out and in the battery, and turn on, shows the att and 3g logos, and then again the screen turns black.
please if somebody can help me, i'm new with htc, but it shows this:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
Thanks in advance for you help.
it is getting worst, i did a hard reset, and now when i conect to my computer, ask me for "generic rndis drivers", last time i solve this from the phone, but now it has black screen.
Please i need yor help.
thanks.
Click to expand...
Click to collapse
You have a patched Radio on your device that was put on to unlock it. Unfortunately the Radio is incompatible with your rom which is giving you the black screen. Do you know if you have WM6.0 or WM6.1? If you do then you can just flash a compatible Radio back onto your device via microSD Card.
The simplest thing if you dont know what Rom you are using and dont have any user information on your phone that you need to keep, or if you already have it backed up is to goto my Flashing Your First Rom Guide, upgrade your HardSPL using step3 (Flashing via MicroSD Card) and then flash a WM6.1 Rom using step5. Once you have upgraded your Rom you should have no problem using step4 to unlock your device if you want to. Just remember to flash back a WM6.1 Radio (step6) after it has completed.
What is "htc all unlock 1.2".
I can't find that tool on xda-developers.
Dave
DaveShaw said:
What is "Flashing via MicroSD Card".
I can't find that tool on xda-developers.
Dave
Click to expand...
Click to collapse
Dave what did I tell you about following me around lol
mskip said:
Dave what did I tell you about following me around lol
Click to expand...
Click to collapse
LOL
Yeah, sound's like a new radio flash will sort it out.
Why use a Unlocker off one forum and ask for help on another? There are 3 Kaiser unlockers on here All of which are really easy to use and work perfectly (or we know howto fix when they go wrong).
Ta
Dave
Turn's out your using Olipro's unlocker.
Just that the bastards on the other site didn't credit him for it
@OP - Please see this thread for more help - http://forum.xda-developers.com/showthread.php?t=375583
Ta
Dave
Hi alll,
I have orange spv m500,when i tried to update my rom it failed and got stuck in bootloader mode.And when i saw some posts they were written that 'download mtty 1.42'but in my pc on opening mtty usb option is not available Any one plzzzzzzzzzz Help I am gonna cry........
Welcome to the forums!
I suggest you read the MTTY thread very carefully!
Just follow every step and you'll be fine.
Cheers,
EC
i tried every step plzzz help me
Please tell me exactly what went wrong.
Did you fail installing the drivers?
i just tried to change my os of my pocket pc and it asked for an update for my rom and agreed for that..then after sometime when i switch on my pocket pc i said serial on top and v1.00 at the bottom....please help me .....thank you in advance
It would be very helpful if you let us know what HTC device you have