Hi guys,
anyone that can give me full step by step solution will be my personal god and i'll donate.
I tried flashing hard SPSL and its gone wrong.
I have a T-Mobile Vario III ( bought 8/02/08 )
I get up to the tricolour screen - with white at the bottom and this is what it says.
top left corner: RUUNBH
Right: KAIS130
SPL-1.56.0000
CPLD-8
At the bottom on the white it says 'serial' when the USB is plugged in it says USB.
Ive tried alot of things ive read now im stuck here.
please help.
C
so u're up to the tricolor screen......unplug and replug the cable, then hit enter
ok it takes me to the current info about your pda
image version :
select from below
update button - update current rom version
or cancel
I you don't get it done PM me & I'll walk you through Harspl thru Jumpspl.
Although with Display Driver 1.56, you shouldn't have any issues.
GSLeon ive pm'd u.
thanks
If HardSPL is not installed but you can get to the boot screen then flash your original rom back! You can find a list of available original roms in the wiki, just make sure that you take the same operator (HTC, t-mobile,...) & the same language.
After flashing it back you should be able to use your phone again, then install HardSPL and flash any custom rom if you want.
Let us know how it goes...
Related
DEAR ALL PLEASE HELP ME I WAS UPDATING MY XDAIIS FROM SEEO2.COM
AND I STARTED GETTING THIS ERROR-114,
AND MY PHONE HAS TURNED GREY AND I CANNOT OPERATE IT PLEASE HELP ME SOON.
When you say grey do you mean blank with USB 1.01 or Serial 1.01 displayed at the top and bottom of the screen?
If so, do a search on these forums for "bootloader" and "upgrade" and you'll find all the help you need. If it IS showing these items at the top and bottom don't worry...your phone is in the bootloader mode and the forum posts you find will tell you what to do from that point.
Cheers
Ant
GREY SCREEN WITH V 2.06 DISPLAY
THANKS FOR YOUR REPLY BUT IA'M NEW TO THIS SITE SO CANT GET THROUGH THE RIGHT LINK,
KINDLY GIMME THE LINK
CHEERS
SHARAN
ROM : 1.12.62 WWE
Does any one know from where can i download rom:1.12.62 wwe for my xdaIIs.
I TRIED TO UPDATE IT BUT SMTHG WENT WRONG AND MY PHONE HAS GONE BLANK, GREY COLOUR SCREEN SAYING USB . V 2.06.
KINDLY HELP ME TO START MY PHONE.
REGARDS
SHARAN MEHTA
Take out your battery, and leave it out for 30-60 minutes.
Reboot your PC
Follow instructions http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
hi, guys, i tried to unlock a kaiser with htc all unlock 1.2, and in the pass number 3, show me an error, and put the screen black, when i conect to sync, it shows conected, but the screen is black, if i pull out and in the battery, and turn on, shows the att and 3g logos, and then again the screen turns black.
please if somebody can help me, i'm new with htc, but it shows this:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
Thanks in advance for you help.
it is getting worst, i did a hard reset, and now when i conect to my computer, ask me for "generic rndis drivers", last time i solve this from the phone, but now it has black screen.
Please i need yor help.
thanks.
cellshop2 said:
hi, guys, i tried to unlock a kaiser with htc all unlock 1.2, and in the pass number 3, show me an error, and put the screen black, when i conect to sync, it shows conected, but the screen is black, if i pull out and in the battery, and turn on, shows the att and 3g logos, and then again the screen turns black.
please if somebody can help me, i'm new with htc, but it shows this:
KAIS1*0 MFG
SPL-1.0.Olipof
CPLD-8
Thanks in advance for you help.
it is getting worst, i did a hard reset, and now when i conect to my computer, ask me for "generic rndis drivers", last time i solve this from the phone, but now it has black screen.
Please i need yor help.
thanks.
Click to expand...
Click to collapse
You have a patched Radio on your device that was put on to unlock it. Unfortunately the Radio is incompatible with your rom which is giving you the black screen. Do you know if you have WM6.0 or WM6.1? If you do then you can just flash a compatible Radio back onto your device via microSD Card.
The simplest thing if you dont know what Rom you are using and dont have any user information on your phone that you need to keep, or if you already have it backed up is to goto my Flashing Your First Rom Guide, upgrade your HardSPL using step3 (Flashing via MicroSD Card) and then flash a WM6.1 Rom using step5. Once you have upgraded your Rom you should have no problem using step4 to unlock your device if you want to. Just remember to flash back a WM6.1 Radio (step6) after it has completed.
What is "htc all unlock 1.2".
I can't find that tool on xda-developers.
Dave
DaveShaw said:
What is "Flashing via MicroSD Card".
I can't find that tool on xda-developers.
Dave
Click to expand...
Click to collapse
Dave what did I tell you about following me around lol
mskip said:
Dave what did I tell you about following me around lol
Click to expand...
Click to collapse
LOL
Yeah, sound's like a new radio flash will sort it out.
Why use a Unlocker off one forum and ask for help on another? There are 3 Kaiser unlockers on here All of which are really easy to use and work perfectly (or we know howto fix when they go wrong).
Ta
Dave
Turn's out your using Olipro's unlocker.
Just that the bastards on the other site didn't credit him for it
@OP - Please see this thread for more help - http://forum.xda-developers.com/showthread.php?t=375583
Ta
Dave
So here's the deal, I have a Qtek S200, stuck in tri-color screen.
The screen says IPL 2.10, SPL 2.20.0001.
I have been told that this is a G4 device that was flashed with a G4 IPL.
Any number of flashing tools I use tells me Invalid tool, file open, error etc etc.
It appears that my device is toast.
IS there a way to revive this little beauty>?
Please say yes
noonas said:
So here's the deal, I have a Qtek S200, stuck in tri-color screen.
The screen says IPL 2.10, SPL 2.20.0001.
I have been told that this is a G4 device that was flashed with a G4 IPL.
Any number of flashing tools I use tells me Invalid tool, file open, error etc etc.
It appears that my device is toast.
IS there a way to revive this little beauty>?
Please say yes
Click to expand...
Click to collapse
Anybody? Please? I have read the WIKI, the lazy guides, they all result in the same.
noonas said:
Anybody? Please? I have read the WIKI, the lazy guides, they all result in the same.
Click to expand...
Click to collapse
Oh and also I was told the Oipro had a solution , but since PM and other ways to contact, no response.
Anyone knows of a way?
noonas said:
Oh and also I was told the Oipro had a solution , but since PM and other ways to contact, no response.
Anyone knows of a way?
Click to expand...
Click to collapse
Not ready to give up on this , please someone please...
puhleeze? Helehehehellp me?!
noonas said:
puhleeze? Helehehehellp me?!
Click to expand...
Click to collapse
Echo,,, echo echo echo.. hello, hello hello....
you can't flash a g3 with g4 upgrader. the program don't allow you to do this..
if your spl / ip is like x.xx.0001 is a g4 if is x.xx.0000 is a g3
you can instal a g3 update on bootloader (the 3 colors screen)
just connect to usb port and start the program/try with novendor update. ( the program not the ms dos)
marar said:
you can't flash a g3 with g4 upgrader. the program don't allow you to do this..
if your spl / ip is like x.xx.0001 is a g4 if is x.xx.0000 is a g3
you can instal a g3 update on bootloader (the 3 colors screen)
just connect to usb port and start the program/try with novendor update. ( the program not the ms dos)
Click to expand...
Click to collapse
So in Tri-color screen it says the following:
IPL 2.10
SPL 2.20.0001, this should make it a G4 chip then.
On to do the NVID update now...
Ok downloaded the Upgrade_HardSPL_G4 tool and ran it.
It went rather quickly and ended in a completely green screen
att he top it says:
IPL 2.10
SPL 2.20.0001
Will do some more attempts.
noonas said:
So in Tri-color screen it says the following:
IPL 2.10
SPL 2.20.0001, this should make it a G4 chip then.
On to do the NVID update now...
Ok downloaded the Upgrade_HardSPL_G4 tool and ran it.
It went rather quickly and ended in a completely green screen
att he top it says:
IPL 2.10
SPL 2.20.0001
Will do some more attempts.
Click to expand...
Click to collapse
So I downloaded Prophet Shadow 2.0 rom and ran the G4 upgrade RUU.
During the flashing progress the Bar on the Phone whent RED a couple of times, it eventually went to 100% (being red for about a minute), once the flash completed the phone rebooted in to the sam old tri-color screen again,.
What do to now??
*bricked*
did you try to recover the device yet by flashing a NVID ROM before flashing a cooked rom? try downgrading it first before hardSPL.. let me find links for you to read..
http://forum.xda-developers.com/showthread.php?t=310452
follow this link very very carefully..
marekPLPH said:
did you try to recover the device yet by flashing a NVID ROM before flashing a cooked rom? try downgrading it first before hardSPL.. let me find links for you to read..
http://forum.xda-developers.com/showthread.php?t=310452
follow this link very very carefully..
Click to expand...
Click to collapse
Downloaded the Prophet's 2.20.7.34_2.20_7114_02.69.21 Rom
Launched the G4 RUU, and I get Error 260 Update Error ;(
/Jonas
*EDIT*
Bad USB Cable (Oups), I flashed the G4 completely (again the progress bar on the phone goes red at times and then green again) once completed it reboots to the same BootSplash (Tri-color) screen without any difference.
/Jonas
did you tried the other USB ports at the rear end of your CPU??
did you tried the recovery prcedures stated on the files i gave you to read?
if you have followed those there should be no problem bro..
try reading them back again and this time carefully...
and before flashing remove battery.. make sure its charged 50% or more... return battery, do hard reset when its on boot loader try connecting USB make sure you see a USB sign on the lower left of your screen... when RUU starts check the upper right corner of the screen of your phone if theres an RUU sign < optional, its just like a USB sign on the lower left of screen>
your phone should work if all procedures have been done...
marekPLPH said:
did you tried the other USB ports at the rear end of your CPU??
did you tried the recovery prcedures stated on the files i gave you to read?
if you have followed those there should be no problem bro..
try reading them back again and this time carefully...
and before flashing remove battery.. make sure its charged 50% or more... return battery, do hard reset when its on boot loader try connecting USB make sure you see a USB sign on the lower left of your screen... when RUU starts check the upper right corner of the screen of your phone if theres an RUU sign < optional, its just like a USB sign on the lower left of screen>
your phone should work if all procedures have been done...
Click to expand...
Click to collapse
Well this 'ol PZ I have only have one USB port. I have another PZ but is Vista.
I leave the phone on USB Charge over night so it should have enough juice.
I will go back and re-read the instructions, but this is not my first HTC device... but I may have missed something.
noonas said:
Well this 'ol PZ I have only have one USB port. I have another PZ but is Vista.
I leave the phone on USB Charge over night so it should have enough juice.
I will go back and re-read the instructions, but this is not my first HTC device... but I may have missed something.
Click to expand...
Click to collapse
Status report.
Downloaded the file as referred to in the post.
Once I run it, it stops at 80% RED bar on the phone.
On the PC (RUU 2.5.2) it says the following:
Error 326: Invalid Command
This NBF file cannot be used for your PDA phone. Please check your NBF file
What now?
goja67 said:
Download Prophet_PV_Temp and you will fiks it.
Click to expand...
Click to collapse
Thanks for the tip, I downloaded this ROM, ran the G4 RUU file.
It went through (again with a red bar at times on the device).
The PC said it all went successfully, and the phone reboots to tri-color screen again, SPL and IPL still the same.. DAMN!!
Any other suggestions or should I just declare it bricked?
If your device is G4 , try this RUU:
http://www.mediafire.com/download.php?yjzwtd4yybt
Hope it'll fix your device as it did for mine .
thangkls said:
If your device is G4 , try this RUU:
http://www.mediafire.com/download.php?yjzwtd4yybt
Hope it'll fix your device as it did for mine .
Click to expand...
Click to collapse
About 80% in I get "INAVLID COMMAND"
Hi,
I have the same problem. My imate was G3 ( I learn it after appyling the G4 batch ) I need to recover process and files from G4 to G3. I tried to recover by RUU_Prophet_220734_2207114_024721_NVID.exe (novendor)
But, On the PC (RUU 2.5.2) it says the following:
Error 326: Invalid Command
This NBF file cannot be used for your PDA phone. Please check your NBF file
Do you have any solutiun or idea???
Hi guys...
Well Here's my story....
I was an Universal guy for about 5 years, and now I find myself stuck with a Prophet....
Don't take me wrong, I realy loved my Uni, and the prophet seems a good phone...
So after using it for a few days, I came back to this forum, and entered the prophet world...
Without spending the minimum time needed to search and learn how to properly upgrade the phone, or even tp know if it was a G3 or G4, I downloaded and flashed my prophet with a new ROM...
All went fine, and I got stuck in the bootloader screen, for about an hour... Then I finally found out how to properly HardReset the device, and now....
Well,... now I'm stuck in the splash "Inovation" screen and nomatter what I do, I just can't enter the bootloader....
After readding a bit...yah I know I should have done that before, and not after... I realize that my battery may be the culprit for not entering bootloader and so I plugged it in to the wall charger...NO charging light came on...
I know I don't need to write the next few words, but here they go...
HELP!!! PLEASE!!!
EDIT:
I needed the SIM card in my prophet, so I took it out, and also took the SD card...
Then I decided to re-try entering the bootloader...and....SUCCESS!!!
Now doing the RIGHT procedures to upgrade my prophet...
Hi masters!
I'm murilo, and i'm braziliam! So, my english is soso.....rs
Well, i brick my kaiser TyTn II when i was installing "V9" Rom.
He only start on tricolor Screen!
This is the information on Screen at tricolor :
KAIS120
SPL-1.94.0000
CPLD-8
my computer Recognizes the USB connection with my HTC, and on screen of my phone appear "USB".
I can't use mtty application because appears "USB port can not open" using USB port.
Help me please, masters!
I need my phone!
Thanks!
Murilo Costa
Have you installed HardSPL? If a rom didn't succeed you can (Normally) just reinstall another rom when your in the "USB Display".
-Armazia
costa.murilo said:
Hi masters!
I'm murilo, and i'm braziliam! So, my english is soso.....rs
Well, i brick my kaiser TyTn II when i was installing "V9" Rom.
He only start on tricolor Screen!
This is the information on Screen at tricolor :
KAIS120
SPL-1.94.0000
CPLD-8
my computer Recognizes the USB connection with my HTC, and on screen of my phone appear "USB".
I can't use mtty application because appears "USB port can not open" using USB port.
Help me please, masters!
I need my phone!
Thanks!
Murilo Costa
Click to expand...
Click to collapse
This is posted in the wrong section and has nothing to do with rom development. This is not the " help me I screwed up my phone because I can't be bothered to read " section.
You have jumpspl on your phone, not hardspl. Flash your original stock rom back on your phone and then read " rom flashing for noobs " in it's entirety from the above stickies, before you really do " brick " your phone.
Please take your time to read threads before you go ahead with flashing a ROM.
[Resources] Flashing Your First Kaiser Rom (For Noobs)
To get out of the situation you are in try and flash stock ROM while in bootloader.
If you are still stuck use this thread:
Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here
In future search before posting new thread.
Thread locked.