I got an HTC Fuze with
- ROM version 5.11.502.2 WWE
- radio version 1.14.25.35
- protocol version 52.64c.25.35h
when i tried to activate the wifi it does not do anything and it still disable, the phone always said "Wireless LAN is OFF. Turn on Wireles LAN".
I just flash my phone with a this ROM (the official one from HTC) but it did not solve the problem.
any ideas?
Thank you
Related
Hi
I have downloaded several radio rom from wiki and when I run the .exe file it shows my version is 1.2.0 image and it will upgrade to v2.47.21 etc. but when I go to my pda to check the rom version it's not 1.2.0, it's
Radio rom V02.19.21.
Protocol version 4.1.13.09
Ex Rom 2.15.13.121
Why does the program not show the correct rom version, will it damage my pda as I try to upgrade the rom when I had version
IPL 1.00
SPL 1.00.0000
GSM 01.13.20
OS 1.0.13.21
It's stop the battery from charging.
Also since the upgrade from 1 to v2 I get a blank screen when I reply to SMS, couldn't find my phone provider with auto config as the Dopod is from Singapore and I am using it in Hong Kong.
Thanks
The installer used for flashing the radio rom is "hacked". that's why it displays incorrect info. Just proceed witht he install and you should be fine.
I can't help you with your sms issues...
hi, i have a g3 prophet with ipl ver. 1.00 and spl ver. 1.00.0000
i've just upgraded to pdaviet 4.0.0.4 PV and everything works flawlessly. however, due to wifi connections dropping i upgraded my phone's radio firmware from 1.13 to 2.19, the known version without bug with the pdaviet firmware.
installation is flawless but now my prophet can not boot , i just shows the dopod screen and resets continuosly. please help
i tried reupgrading with the newer radio version, but the installer said that it can not install, eventhough i have put my prophet in the three colour screen (bootloader) help me
You tried to restore old radio to phone , if not .
TOLD me ! i help u !
i dont have the old radio installer, it is 1.13 and can't find it anywhere.
also, i tried to upgrade to newer radioand reinstall rom, but the installer can not recognize my dopod, altough i have put it in the bootloader screen and connect it via usb.
it says error [300], invalid update tool. i have tried the 2.69 radio, 2.19 radio, and even the AKU 2.2 installer, and all of them return the same message.
please help
Ok, simple really, answer the poll and if GPRS DOES work for you post your EXACT radio version and network provider and IE connection settings as a reply below
Phil
Working after upgrading to radio version 4.1.13.28_02.61.01.
Ukrainian provider UMC.
hmm everything is clear now .
People with radio 4.1 have working GPRS (edge too? )
and with 4.0 not.
How do I upgrade my radio? Should I flash a rom with radio and then come back to WM6 or somehow separately?
Just flash a rom with radio after flashing WM6.
and then go back to WM6..? could you please point me to rom with right radio? and my device (SPV C600) is rather Qtek 8300 or 8310?
I'll package radio version 4.1.13.28_02.61.01 with the update in about an hour.
Will update the first post when I've updated it
Phil
You mean a Tornado WM6 Rom with better radio? Cool!
will i have to do once more to format binfs via teraterm? and then run ruu?
You can actually just upgrade the radio ROM, it wont affect your WM6 OS
i don't have a radio rom
where we can get only radio rom?? because i don't want flash all ROM again
revanmj said:
where we can get only radio rom?? because i don't want flash all ROM again
Click to expand...
Click to collapse
jm012a9749 said that it will be available in an hour
but i understand that he pack radio update with entire rom and i want only radio update
You can find it in this forum, search the Tornado thread, few pages back, I just searched for it yesterday. I am only afraid the link to the radio is down due to inactivity. Well, downloading a 30-40MB file which he packed wouldn't take that long right?
I'm posting an updated ROM with it which should address the Audio issues people are experiencing, also some cabs for T9, Comm manager, Task manager and clear storage. So it IS worth flashing the entire ROM again.
Phil
After update GPRS works ;]
my mobile operator is Orange Romania, radio version is 4.1.xx,and my gprs connection it's working.
I have the updated WM6 ROM with the updated Radio. Both GPRS and Edge is working. But sometimes it can not connect to GRPS and I have to restart all the radio components.
Works with:
Radio 4.1.13.28_02.61.01
KPN netherlands.
Working on Orange and TMob UK, albeit with the GPRS/Voicemail problems described here: http://forum.xda-developers.com/showthread.php?p=1381997&highlight=gprs#post1381997
can someone help me set up my gprs settings for o2. i dont know what my access points are etc.
Hi Guys,
I have a cingular wizard - unlocked and I have been using this image for a couple of days without any problems. I am located in Malta (In the mediterranean).
Since yesterday my PDA Clock started to work erretically - showing wrong time (moving ahead). Date is being set back to the 14th of February, and I cannot connect to the Internet through GPRS. I was using a TNT Image - version 19.199. I re-flashed with another image (Enhanced v4.0)and the problem with the GPRS still happens. When I try for example to update the weather panel I get: Connecting to my connection. Connecting to GPRS. After a few seconds I get an error- Dialed:"connection name". The answering modem has discoonected. To check the connection settings and change them if needed, tap settings. Dismiss.
The Sim Card is working fine in another phone.
FYI, I am using Radio 2.7.11. I also tried 2.19 UK version but still same problem. Should I maybe reflash with original T-Mobile Rom?
What can the problem be? Thanks for any advise / help.
Regards
Jezzb
Yeah....the same thing happend to me so i just flashed the tmobile rom and flashed back to wm6 and it works fine now!
Thanks for your reply.
I flashed back to the T-Mobile image but it still did not work. Did you leave the IPL/SPL to 2.26 or downgraded this as well?
Thanks
Jezzb
Hi
I got a Sprint HTC Touch Pro2 which is unlocked and i use it in India using the GSM feature of the phone using SIM card. The phone came with a WM6.5 OS, i decided to flash the phone with custom ROM's, here are my few queries
1. In my case where i use the phone using SIM, should i use the GSM ROM or CDMA ROM?
2. Whenever i reboot the phone, it tries to contact the provider (Sprint) for Handsfree activation, How can i turn this OFF?
3. When the phone is rebooting, i get the Sprint splash screen, can i turn this OFF?
4. The first time Hardspl was intalled (paid in a store to get it installed), he installed a Hardspl that says "Test Only ROM not for sale" when rebooting, is that normal behaviour?
Phone Details -
RHOD400 32M SS-BC
SPL - 1.00.Olinex
MicroP(LED) 0x0A
MicroP(Key) 0x04
TurboHW/TurboSW
There is some TP MFC Date (let me know if i need to provide)
Software Info
OS Version - 5.2.23544(23544.5.5.0)
Manila Version - 2.5.2.121225.0
ROM Version - 3.04.605.3 WWE
ROM Date - 02/21/2010
Radio Version -1.96.00WF
Appreciate if can suggest the correct HardSPL for Manila or Energy ROM's.
Thanks
Raj
vuday_raj said:
Hi
I got a Sprint HTC Touch Pro2 which is unlocked and i use it in India using the GSM feature of the phone using SIM card. The phone came with a WM6.5 OS, i decided to flash the phone with custom ROM's, here are my few queries
1. In my case where i use the phone using SIM, should i use the GSM ROM or CDMA ROM?
2. Whenever i reboot the phone, it tries to contact the provider (Sprint) for Handsfree activation, How can i turn this OFF?
3. When the phone is rebooting, i get the Sprint splash screen, can i turn this OFF?
4. The first time Hardspl was intalled (paid in a store to get it installed), he installed a Hardspl that says "Test Only ROM not for sale" when rebooting, is that normal behaviour?
Appreciate if can suggest the correct HardSPL for Manila or Energy ROM's.
Thanks
Raj
Click to expand...
Click to collapse
one. only use cdma roms. flashing a gsm rom would brick your phone.
two. settings --> personal --> phone --> network --> mode of operation --> gsm/umts only --> you can manually select network or allow it to automatically select.
three. easiest way... i suggest a program called bsb tweaks. found here.
four. i havent ever heard of paying for hardspl install. so unsure. though. i suppose as long as it works... no use fretting over it? else you can (re)cdma hardspl, here.
remember. only use cdma roms.
a list of a collection of cdma roms can be found here.
i also suggest task29 before you flash new roms. can be found here.
sh4d0w86.
Which Andoid Version? GSM or CDMA
HTC TOUCH PRO 2/SPRINT
So before installing Android ROM onto my SD card, I flashed and unlocked my phone including the radio allowing it to use a SIM Card in the states.
I changed the Radio Settings To GSM.
1. Windows Mobile works fine with no issues. Phone works great.
2. When I load Android from the boot application it runs fine.
2.1 Issues: I can not get a Tmobile signal while in Android. I pick up Cingular and ATT and some other provider I've never heard of, but I can not connect to TMobile.
Wifi Works great.
I Installed the CDMA Android ROM, Will it brick if I install GSM Android ROM.
Any suggestions would be very helpful !
Thanks in advance.
SR