Hi Guys,
I have a cingular wizard - unlocked and I have been using this image for a couple of days without any problems. I am located in Malta (In the mediterranean).
Since yesterday my PDA Clock started to work erretically - showing wrong time (moving ahead). Date is being set back to the 14th of February, and I cannot connect to the Internet through GPRS. I was using a TNT Image - version 19.199. I re-flashed with another image (Enhanced v4.0)and the problem with the GPRS still happens. When I try for example to update the weather panel I get: Connecting to my connection. Connecting to GPRS. After a few seconds I get an error- Dialed:"connection name". The answering modem has discoonected. To check the connection settings and change them if needed, tap settings. Dismiss.
The Sim Card is working fine in another phone.
FYI, I am using Radio 2.7.11. I also tried 2.19 UK version but still same problem. Should I maybe reflash with original T-Mobile Rom?
What can the problem be? Thanks for any advise / help.
Regards
Jezzb
Yeah....the same thing happend to me so i just flashed the tmobile rom and flashed back to wm6 and it works fine now!
Thanks for your reply.
I flashed back to the T-Mobile image but it still did not work. Did you leave the IPL/SPL to 2.26 or downgraded this as well?
Thanks
Jezzb
Related
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
robsahm said:
Im currently living abroad in Germany and have purchased a Kaiser via T-Mobile, branded as MDA Vario III. Well I love the device but my german sucks and the whole OS is in german. Is there anyway I can flash to ROM to get an english version of the OS? If I did this would it still work in Germany via T-Mobile or is there some kind of lock to the current ROM? Any advice would be greatly appreciated! Thanks!
Click to expand...
Click to collapse
Yep! Just HardSPL, and then select an English ROM (most are) and flash.
Read the Sticky in this forum for guide lines on how to flash, and common problems and thier solutions.
http://forum.xda-developers.com/showpost.php?p=1846653&postcount=800
Go there and READ and READ. (Read the Wiki first). You will find all your solution there. Everything you need explained over there.
I will describe the procedures you will need:
1. Back up your stuff
2. Charge up your phone to 100% and connect to your pc with usb make sure ActiveSyn can see your phone
3. CID or SIM unlock your phone first if it is necessary then.
4. HardSPL your phone (You can find the information in the Wiki)
- If you encounter White Screen Problem, check the HardSPL White Screen
Issue - Solved!
5. Find a Rom that you like
6. Find the radio rom that rom supports
7. Flash the rom
8. Do a HARD RESET when you see the "Tab the screen to setup windows mobile..."
9. Flash the radio rom
10. You are DONE!!!!!!!
As long as it's GSM band, then it should all work. You might have to manually setup the 3G network for Germany on your phone.
Thanks for the feedback! My main concern was not knowing if it would work with my carrier after I do the ROM.
However the 3G network is a BIG deal 3G is soooo much faster than GSM. Is it even possible to manually setup the network afterwards?
Thanks again, you have been great!
you can always setup your 3G network manually afterwards. It's just a different rom version. It's like you install English version of Winxp on your PC instead of the German version. You can still setup your wireless connection for your PC.
Sine you are in Europe, I would suggest you use Dutty's WM6.1 Rom (The bluetooth has a bit of issue - not able to receive file transfer, but he's working on the RTM version with the fix). Dutty's rom is cooked based on the Vodafone rom (He's in England), so I would suppose there should be pre-set 3G setting for Germany as well.
Any one having Stock ROM Dump?
I accidently erased my backup of stock ROM.
Searched in Forum Couldnt find one !!!
well there is no indian stock rom
well i found the difficulty in finding the indian rom as well but you can flash other roms still if u want the ro you can mail me i have a backup rom in india but others work as fine
Getting ENergyROm running on INdian Touch Pro
Hi Francis,
I saw your signature and realised you might be able to help. I have a Touch pro too.
I flashed Energy ROM (the latest Sep 6 release).
After I did so, EDGE stopped working. I am in India too which means that the Touch Pro here has the 7201 processor and not the 7206 processor as is there in the rest of the world. 7201 doesn't support 3G. Max it can handle is EDGE.
In Energyrom, I saw the 3G option (on/off) in Communication Settings. Data connection (on/off) was also there. I could not turn data connection on at all.
I then went back to the HTC India official update that came in around Mar 09 on the HTC India site.
Before flashing Energy Rom I had this version anyway. In this version, the
3G option in comm. settings was never seen.
When I went back to HTC's rom, EDGE didn't work. I couldn't turn data connection on in this ROM. The funny thing is that the processor name had become 7206. I had read about this on another thread that flashing ROMs that are built for 7201 makes the processor name show up wrongly.
I updated rilphone for the 1.14.25.35 radio.
Even that did not help.
Then I again flashed using HTC India mar 09 ROM. This solved the problem.
You seem to have EnergyROM Sep 6 running?? How did you do it? Btw, am I missing any operator specific settings that I need to do. I have an Airtel Mumbai connection. It is now running on Mobile Office (EDGE).
Thanks!
Kunal
HTC Touch Pro
ROM Version 1.95.720.6 WWE
Rom date 03/27/09
Radio version 1.13.25.24
Protocol version 52.62.25.34G
Edit/Delete Message
Solution to your Problem
Hey i am from India too
It took me a while to figure out but this is how it works
Energy ROM uses a different version of Connection Manager than other ROMS around here
So u need to set up manually. Its easy
Go to Start>Settings>Connections>Connection and go to the 2nd tab and delete the aircel settings listed there and then go to the first tab and Type the name of your Operator . For eg: "Vodafone" if u use Voadfone
Then switch off the 3G mode since our model doesnt support 3G
Thats it
Enjoy
Try to setup the manual connections first on EnergyROM. Dont delete the aircell though as deleting that causes some issues sometimes. Let us know if all this worked
I am an Australian ADP1 user, I installed the radio update on JF's post. And as soon as I did this my could no longer get a data connection. I have been using my G1 data fine for over 3 months no problems. But as soon as the radio update went in, I could no longer get a data connection. The APN settings have remained the same.
The default settings for Telstra (http://telstramobile.custhelp.com/cgi-bin/telstramobile.cfg/php/enduser/std_adp.php?p_faqid=2855) which I had been using is telstra.internet.
However for some reason when I change the APN to the WAP settings
telstra.wap, a data connection can be established. I do not want to be charged the WAP prices, and have been trying to find the original radio image on the ADP1.
Can someone please link me to the original adp1 image?
Or help me able to connect to telstra.internet again?
Thanks for your time.
!edit! forgot to write in...what I really am looking for is the original adp radio.img file.
I'm in the same situation... Anyone have the original radio image to ADP1?
Unless the radio images are different between the tmobile version and the ADP, you can reflash the RC29 firmware with the .nbh file. Afterwards you could update your phones firmware as usual.
I'm not completely sure about this so maybe it would be best to get a second opinion. Can anyone confirm this?
My Moto G XT1039 (Peregrine) was running perfectly on CM 12.1 since July 2015. But two weeks ago it lost network access. This happened without any update or change on the phone. I tried the basic settings : reboot, toggle airplane mode, re-insert sim card... without any success.
Then I followed this thread to take it back to stock : still no network. After that I installed CM13 with this thread : network is back !
But after two days it lost network again. This time I swapped my sim card with another one : ok, problem solved.
For a few days only ! I then fastboot flashed this radio firmware : great, network is back !
And gone again... And now after flashing stock again, CM13 again, radio firmware again, it doesn't connect at all. Except from that everything works, including bluetooth, wifi and gps. The sim card is new and working in other phones. The exact error is : "Error while searching for networks" when I go to Settings | Mobile networks | Network operators.
I'm completely lost and I can't figure what is the root cause of all this. What do you suggest ? Is there a low level log file somewhere on the phone, in which I could find an error like "unable to start radio because XXX" ?
Thanks !
I installed CM13 once again using TWRP. And it's been running fine for the last 3 weeks ! I will never understand what the problem was...
It only loose network for a few seconds from time to time, but this may be normal.
The same problem occured again.
But now I'm sure it's related to the phone and hundreds of people have the same problem. There is a 96 pages topic on official motorola / lenovo support forum about it.
I can't link it here but it's the first result if you type "Post KitKat upgrade BUGs (Loss of signal etc)" in google.
I'm having a super weird issue with my OPO. No matter what I do (install different OS, flash new modem, complete wipe including formatting drives to a different format type) I keep getting two AT&T connections on my phone. *Can't post image due to post restrictions*
I am using a WIND sim from Canada with roaming in the US. I used to be able to connect to my choice of either AT&T or Tmobile. Now when I try and connect to one of those carriers, it flashes registered on network but then does not change what network it is registered on. I've tried disconnecting from the network and then trying to connect. Nothing! The only network it will let me connect to is that weird extra AT&T network, and all call through it have no caller ID, just says call from AT&T.
Any ideas of what this could be would really help me out. I'm all out of ideas
Update - After uninstalling and re-installing everything I could think of, I am now running on CM11. If I update through OTA to CM13 the problem returns.
Update 2 - In case anyone else encounters this issue, after a whole lot of work, including softbricking my phone, I managed to get it working. You must install TWRP Materialized and install the 44S baseband. No other recovery will work, must be Materialized. After I installed the 44S baseband I updated to Omnirom 6.0 and everything is working great!