I know there are some Bluetooth issues, but I haven't seen any petaining to just regular headsets. I have a Jabra JX 10 (original model), and I can pair it, but it disconnects as soon as I try to make a call. It's the best headset I've ever used, so I would really like this to work. I have tried removing it, doing a soft reset, re-pairing it, but no joy. Any suggestions to get this to work? I have a Telus TP2. TIA.
From memory, last time I used a Jabra, you can set it up in 2 Handsfree modes.
I cant remember exactly what to do, but try switching it into the other mode.
Related
Guys,
I did search through the forum and I found several users with the following problem but no solution yet.
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Is there a solution for this?
PS: My bluetooth headset is a Motorola H700.
pms said:
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Click to expand...
Click to collapse
I use a Plantronics 510 (or something like that) and I haven't had any problems with WM6 disconnecting from it like you describe. I have went to answer the phone with it a couple of times and it didn't seem to be linked up, but I just press the button on the headset and it links right up and then answers the call on the next press. But thats only happened a couple of times and I think each of those times I had walked away from my phone so probably went out of range (so I'm guessing the phone just hadn't noticed the BT headset being in range yet).
Try deleting the partnership and setting it up again after a soft reset.
I too have a Plantronics Voyager I think its called and I have not had this problem. I tossed my Motorola BT because the audio level was way too low on it.
pms said:
Guys,
I did search through the forum and I found several users with the following problem but no solution yet.
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Is there a solution for this?
PS: My bluetooth headset is a Motorola H700.
Click to expand...
Click to collapse
golfernutnflorida said:
Try deleting the partnership and setting it up again after a soft reset.
I too have a Plantronics Voyager I think its called and I have not had this problem. I tossed my Motorola BT because the audio level was way too low on it.
Click to expand...
Click to collapse
I tried that and it did not work... Thanks for trying anyway...
Did you try when you tick the hands free that you used the enter button on the D pad instead of the other button?
pms said:
I tried that and it did not work... Thanks for trying anyway...
Click to expand...
Click to collapse
I've reported the same issue with Farias ROM I am using WM6. I use a Plantronics, have to keep going back and selecting it as the handsfree.
Don't know if it a WM6 problem or a Faria problem...annoying I know.
golfernutnflorida said:
Did you try when you tick the hands free that you used the enter button on the D pad instead of the other button?
Click to expand...
Click to collapse
hey.... it worked!!!! At least so far! :-D
I have repaired the headset (but I tried that several times in the past!) and untick the hands free and ticked it again and now I have tried several times and it seems that it is working.
I do not understand way. Can you explain I this non-sense procedure solves the problem
I had a little problem pairing my Plantronics Explorer 340 with my device, but after the pairing, it did work without any problems. apparently some WM6 roms out thre are having this issue. I would suggest re-flash your device and se how it works
I have a Plantronics 655 and don't have this problem. The only thing out of the ordinary that I do when pairing though is re-name the headset (defaults to 6xxPlantronics, I change it to Plantronics 655)
However, I experience a slightly different problem. My BT headset and handset don't automatically re-pair after returning in range or resetting the handset. Anyone else experiencing this?
Everytime I walk out of range or reset my phone, I would have to turn off my headset then turn it back on for the two to pair back up. I sometimes forget and when I hear the handset ring, I pick up w/ the headset only to find that they're no longer paired. Is there a way to have the two automatically pair back up? I never had this problem when I was using AKU3 roms and the stock Cingular 2.25 ROM.
Help please! Does anyone have any idea why I have no Bluetooth audio? I have a 7501 Advantage. I posted about this before & now I'm getting desperate. My LG Style-i worked perfectly for a week, a Jawbone & a Plantronics only worked a few seconds. They all connect & stay connected but there's no audio. They all work fine on other phones, regular & smart phones. It's not a headset problem or a connection problem, just no sound. I can dial out with the Style-i & answer calls with all three headsets but there's no audio. A hard reset didn't fix it nor did various Bluetooth settings. I'm hoping it's something simple. The phone works perfect in every other way. Any ideas?? Thanks
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
Hope it works for you.
Thanks, Thanks. I installed it & nothing seemed to happen. However after a bit of fiddling I had my audio back. Then, just to experiment, I uninstalled it but I still have the audio. Coincidence?? Who knows? Time will tell.
I's assume its just a reg hack, so even after you uninstall it, the entries stay in affect. I bet if you hard reset, you wont have the audio in your bt.
I had that thought & I hope that's the case. So far it's worked all day. Thanks...
Hi if someone can help me it would be much appreciated. I just bought a Touch Pro and everything is working fine....except for one really annoying issue.
Whenever I connect my bluetooth to a headset, it shows connected but no sound is coming out. The sound is muted. when connected to my Audi, I see that the phone has bars (shows connected and I can dial the phone), but when I make a call no sound. Similarly on my SE HBH-DS970 headset. The A2DP works perfectly, but when I make a call nothing.....I've searched google and through XDA and no solution.
Can someone suggest a solution? I've soft/hard reset the device already. If I should change Radio ROM which one would someone suggest that's stable? Thanks
If no one else has this problem, can anyone at least suggest to me if this sounds like a Hardware or software issue? If hardware I will return it, but if software I will try to find a solution. Like I said the phone connects to BT, but I just can't get handsfree to work. File transfers and A2DP work. Thanks
Just flashed to UK ROM and still no help....I've read some people having the same problems over at the Diamond thread...I'm the only one answering my own thread here hahaha....if anyone can help I'd greatly appreciate it. Thanks.
Hi,
I occasionally had such an issue with my Parrot CK3100, but I did not get the time yet to investigate further. After the call was connected I did not hear anything, and I am not sure whether the other party could hear me.
On another day, the handsfree was working perfectly OK.
Cheers
Michael
Thanks for replying Michael....I'm at a loss and I tried all the suggestions posted. I hope it's a software issue...I'm going to buy a bluetooth headset tomorrow and see if that works. It's not the end of the world, but annoying since all my ppc, s60, BB, and UIQ phones prior to the TP have not had any such issues.
Do you think it's a software issue?
have you tried playing music?
Yes.....A2DP works perfectly....no problems whatsoever with file transfers either....I'm guessing either it's a software problem or the phone has a new bluetooth software that's not agreeing with my older SE headset, but the car is another issue. The Car is 2007 and I'm sure the Bluetooth software is not that old. I've tried Euro WWE and Asian WWE ROM and no go.....I'm going to try the Cingular ROM and see what happens.
Just another quick update....I tried 2 other different bluetooth headsets and still the same problem... for some reason the sound for handsfree will not come through...anyone know of registry hack possibly that will allow sound to come through?
May not be entirely related to your problem...
Mine is worst...whenever I have paired my Jabra or iTech BT headset, when the phone rings, 8/10 times the phone will auto pickup (and no I did not setup the phone to auto pickup) and the it will NOT connect to the bluetooth. Instead it will be just like an auto pickup and the sound will come thru the phone headset. This is driving me nuts!!!!
I'm having trouble with my Jabra BT250v and my Fuze. The Jabra always worked perfectly with my Nokia phone so I don't believe it's a problem with the unit. The first oddity I noticed is that it paired automatically without asking for a code. After researching this I found out that the new Bluetooth driver does this by design with non secure items like headsets and such by trying a series of commonly used codes like "0000", "1234". That's all good and well, and it does seem to pair up, but I've read that other devices have trouble being bombarded with codes like that and even though it shows up as paired, it doesn't work. I'm not sure if this is the cause of my problem or not, but is the only obvious thing I could pick out.
I've tried putting the ear piece back into the charging cradle to reset it before trying to pair it. I've tried the standard pairing procedure by turning the device on by holding the power button for 8+ seconds until the light goes solid. I've tried the alternate method of holding both the power and volume up button to pair it in the handsfree mode. I've manually set it to handsfree mode once the device is listed on the phone. I'm really out of things to try to get this going.
Basically it pairs and all looks good but I don't get any sound out of the unit and trying to initiate a call or redial does nothing. The phone just keeps going as if it never paired up at all. I'm hoping someone has some more ideas I could try as I would really like to get this working. I wasn't sure if there was a way to just re-install the Bluetooth stack, or even an alternate Bluetooth driver I could try. If it does have something to do with the auto-pairing feature, does anyone know how to disable this? I'm willing to try damn near anything that can help me pinpoint the problem. I haven't been able to locate any Bluetooth troubleshooting tools and even looked at the service manual, but they just put it through a simple test and it doesn't delve into anything deeper.
Lastly I should mention that I am able to use Active Sync over Bluetooth with my laptop and it does ask for a pairing code so I'm really stumped. I guess it is a possibility that the Jabra is messing up since I last used it with my Nokia about 2 weeks ago, it just seems highly unlikely. Any help would be greatly appreciated.
Many Thanks,
Eidolen
I searched but found nothing in relation exactly. So this is kindof weird, thats why I'm posting. I searched through google, LG forums, jawbone forums and t-mobile forums, nothing exactly in relation (especially dealing with multiple ROM's) or any type of fix to a related issue.
So, I have a jawbone 2 headset device. Stock before I did anything, it paired. Diddnt use it for a while their, and then stared flashing some ROM's. I mainly used cm7 based rom's and paired my headset just fine, very easily actually and fast. I'm having proximity sensor issues, so I had to revert back to a froyo build (EB right now) but the same goes for ultimate rom.
Every time I try and connect initially, i get a force close on the settings. (when jawbone is in pairing mode) Then its in the list of bt connections of course, and i try and re-connect it and it spits out: Their was a problem pairing with Jawbone because the PIN or Passkey is incorrect. Now I havnt been able to find out how to either change the key or the pass. The key is the default 0000, I have even reset the jawbone to when I turn it on, its in auto pair mode. I have done hard-reboots, battery out's almost everything I can think of
So I'm stuck, any information would be completely awesome, and I hope its not super easy... Well I do, but it will not credit my intelligence.
bmann_420 said:
Every time I try and connect initially, i get a force close on the settings. (when jawbone is in pairing mode) Then its in the list of bt connections of course, and i try and re-connect it and it spits out: Their was a problem pairing with Jawbone because the PIN or Passkey is incorrect. Now I havnt been able to find out how to either change the key or the pass. The key is the default 0000, I have even reset the jawbone to when I turn it on, its in auto pair mode. I have done hard-reboots, battery out's almost everything I can think of
So I'm stuck, any information would be completely awesome, and I hope its not super easy... Well I do, but it will not credit my intelligence.
Click to expand...
Click to collapse
There's no answer in this old thread but I am having the exact same issue. It's happening on 2 different phones with different ROMs (Bionix and Weapon). I had the issue before on Weapon 2.8 so I downgraded to 2.7 and it was working. I then when reset my headset to connect it to the other phone, and it's giving me the problem again. Has anyone solved this? I am using a Blu Ant Q2, is that a bad device for this phone? Thanks.
Pairing SGS3 to Jawbone
So frustrating. Hours spent on this. Have 2 Jawbone II s and neither will pair with Samsung Gal S3. Soooooo frustrating. No answers on web to date. Have tried reset of Jawbone. Tried holding TALK button. Tried pairing in every way. No success. Sgs3 does detect many things but not Jawbone. Please answer. [email protected]. Thankyou out loud!!!!!!