For those of you who have been working on early builds of Windows Mobile 6.5, I was wondering if you might know whether a program that was designed for WM5 (using the sidebar scrolling) can utilize the flick scrolling that I see working on the home screen for WM6.5. Does a program have to utilize this feature or is it native to WM6.5 so that any older program can use it? Thanks.
Not quite sure how the WM6.5 scrolling works, but I think it *should* make pages flick-scrollable (it seems acceptable for 2009...)
You can try out FTouchSL (www.ftouchsl.com), or SPB Pocket Plus (http://www.spbsoftwarehouse.com/products/pocketplus).
They both cost money.
Though I advise you to eventually upgrade to a newer phone, WM7 is coming up!
While I would like to wait for WM7, I need to update my old 8125 because the mini USB port broke and the RAM memory is too low to support certain programs. Programs such as Epocrates on the WM platform are still running with side bar scrolling (the interface on the iPhone is much nicer) and I'm wondering if finger scrolling would work even though Epocrates was made for scrolling using a Dpad (which many phones lack) or stylus friendly side bar scrolling. Esword is another program made the same way. Anyone try the early versions of WM6.5 with older programs that have such limitations?
Related
was wondering,
lot of pocket pc apps don't work on the smartphone, and i thought it was pretty much because of the screen resolution difference.
so, when the htc hurricane based phones start coming out, does this mean any windows mobile 2003 apps will work on the hurricane because is has 240x320 res?
what do you think???
it have a different cpu type thats why they often dont work
with 2005 more should be supported but it of cause dont change the issue with many pocketpc applications require the use of pen
and the reverse problem with smartphone applications not supporting the pen at all
hey guys (and girls where aplicable),
i got a question (a sorta dumb one). If a smartphone lik the iPAQ 514 Voice Messenger or the HTC Vox have windows mobile 6 standard does that mean they run regular windows mobile programs or smartphone versions? See the Cheeta/treo 750 has windows mobile standard ed. and is called a smartphone but it uses regular PPC programs, the other two mentioned before have the same wm6 but no touch screen. so i was wondering if that made a diference in the phones capabilities to use PPC Progs? I appreciate any answers as i am greatly puzzled and intregued buy this.
With WM6 they dispensed with the term "smartphone" in favour of WM 6 Standard. Too many non Windows Mobile phones were being called "smart phones" as well as PPC phones.
WM Standard has no support for touch screens and many PPC apps will not run on it.
WM Pro has touchscreens.
understanding versions...
so lemmie go over this... a ppc with a touch screen is said to run WM6 pro, a ppc without a touch screen is said to run wm6 standard the "smartphone" version. so what of the vox? it has all the capabilities of a full sized PPC without the touch screen so where would it and the ipaq 514 fit in? Because correct me if i'm wrong but dont they offer features like MS Office editing and production verus the others whose ability is limited to viewing or is it the WM6 platform that actually enables this?
You're right, its just a functionality of WM6. Any smartphone (i.e. non-Touch screen device) running WM6 has those same office capabilities and will be running WM6 Standard, not Professional.
As far as I know the two WM6 are one same core of the same OS but..
In the PPC version there is more advanced setup in the menus wich setup is locked in the Srtandard by default.
For example in the Standard there is no way to change the IP of the wi-fi manually.
And in the pocket pc there is some dll's, responsible for touchscreen operation .
yes but....
i do believe you might be correct on everything but the I.P setup for standard. i have an sda running wm6 and i can manually setup my wifi and change certain settings in the network config. Also the HP ipaq 514 that i've been researching also has the same features. see my big thing is i love he compact size of the smart phone but need the capabilities of the PPC. It wold be great if i could get the best of both. i know the O2 XDA stealth has that exact combo but they are hard to find and kinda pricey for thier age.
There are separate SDKs for Standard and Pro, so I think the differences run a little deeper.
well what to do?
well i guess my final questions then wuld be what kind of phone are:-
1/ O2's xda stealth
2/ HP's Ipaq 514
has this been ported to the qvga kaiser?
precisely. Will TouchFlo 3d to Kaiser?
No, it doesnt work (yet) even with the new beta direct 3d drivers. I have tried it. There is a qvga version floating around. I tried it with my Tilt with l26 diamond rom and I still only had 3fps.
this should be possible without the drivers since i've seen a plugin called animatedtoday have some nice speeds without a single driver and even when changing tabs on htc home seems pretty quick.this should only be a matter of converting a vga plugin into qvga which can be done since there's software we all use that comes in both resolutions
but I walk about whether it will touchflo 3d Kaiser to be done if the drivers
I do not want plugin, I'd prefer touchflo 3d probably like all
anyone have the manila cab and all the files consisted in it? I'm going to see if i can continue on with getting this interface to be converted to qvga with proper rapid movement. Any advice on where to start and what to use is greatly appreciated and I'll post if I got it to be a bit faster or significantly faster.
Hay all, first time so... be gentle.
So I've just got my grubby mits on the huge and amazing Toshiba TG01, this is the 4.1 inch, snapdragon running competitor to the iphone... I've got it on Orange in the UK (so it's all UK GSM, 3G and HSDPA radios here if it matters for support reasons)
Now the TG01's "stripe" interface looks... well fugly, no two ways about it.
Orange provide their own UI which is inspired by the PS3's I suspect, and it's usable, but does nothing once your deep in winmo 6.1 territory (contact lists etc)
I've tried to get TouchFlo 3D and 2D running on the device (including via throttle launcher) but to no joy....
Does anyone know how This Bugger managed it?
Have any of the truly genius coders here managed it on devices more powerful than HTC's (touchflo2D seem to be other way round) - or can anyone suggest alternative UI's till the winmo 6.5 upgrade roles round?
Cheers!
Raze'
SPB Mobile Shell
Hey mate,
I have a TG01 and I am using SPB Mobile shell, its a shell on top on top of the OS, its about $30 but its head a shoulders above the crappy GUI's that come installed.
http://www.spbsoftwarehouse.com/products/mobileshell/
HTH
ninja
razerbug said:
Hay all, first time so... be gentle.
So I've just got my grubby mits on the huge and amazing Toshiba TG01, this is the 4.1 inch, snapdragon running competitor to the iphone... I've got it on Orange in the UK (so it's all UK GSM, 3G and HSDPA radios here if it matters for support reasons)
Now the TG01's "stripe" interface looks... well fugly, no two ways about it.
Orange provide their own UI which is inspired by the PS3's I suspect, and it's usable, but does nothing once your deep in winmo 6.1 territory (contact lists etc)
I've tried to get TouchFlo 3D and 2D running on the device (including via throttle launcher) but to no joy....
Does anyone know how This Bugger managed it?
Have any of the truly genius coders here managed it on devices more powerful than HTC's (touchflo2D seem to be other way round) - or can anyone suggest alternative UI's till the winmo 6.5 upgrade roles round?
Cheers!
Raze'
Click to expand...
Click to collapse
"That Bugger" used itje's Blackstone cab to get it on the phone. It says so in the video's comments.
To save you the trouble, you might want to click this link...
http://forum.xda-developers.com/showthread.php?t=442154
The TG01 will get an official WM6.5 upgrade.
I think the WM6.5 interface is pretty good, even without TouchFlo. So my advice is to just wait for the official WM6.5 upgrade, disable all of Toshiba's interface extensions and enable WM6.5 default home plugin (Titanium).
You can also try alternative interfaces like SPB Mobile Shell, Throttle Launcher, PoinUI etc. and alternative programs like Kinoma Play, Resco Photo Viewer etc.
Hi all, thanks for the advice, in the end I found PointUI and in turn PointSense which near perfectly reproduces the touchflo interface.
but I agree the winmo6.5 will really improve the phone, I belive toshiba planned to release it with 6.5 but MS's stalling meant that didn't happen.
Cheers again.
What's the possibility of putting WM6.5 on the MC9090? Currently it is running WM6.1 and the device has 64mb of ram and 128mb of rom.
With WM6.1 IE mobile lacks some specific javascript functionality I need. Specifically, the Onblur event does not fire for the Input Text inline elements. It works however for other input elements such as radio and button.
Using another web browser is not an option because I am required to use WaveLinks Industrial Browser which is a wrapper for IE.
I need to fix the problem with the IE Onblur event or upgrade the device to WM6.5.
Any suggestions?
Someone would have to make a 6.5 rom, since Motorola isn't.
I don't think the demand for this is high, and drivers for WM6.5 would be hard if not impossible to find.
It's possible I guess... but not probable.