Related
My Qtek 9000 cannot recognize 4GB SD card (DANE-ELETC)
Your help much appreciated.
Rom 2.05.00
Rom Date 04/09/07
Radio V. 1.15.00
Protocol 42.51.P8
I guess you mean 4Gb SD Card.
Is it SDHC?
If so, then it would be worth looking in the Universal accessories board at what people have to say, which is 'no' for the sdhc cards.
I bought a 4 Gb card but it is a non-sdhc type so that it would work.
Cheers
Fish
I can't seem to find the manufacturer's website. Can you post the the spec sheet of the model you have got?
fishtastic said:
I guess you mean 4Gb SD Card.
Is it SDHC?
If so, then it would be worth looking in the Universal accessories board at what people have to say, which is 'no' for the sdhc cards.
I bought a 4 Gb card but it is a non-sdhc type so that it would work.
Cheers
Fish
Click to expand...
Click to collapse
Yes is a SDHC, So the qtek 9000 need a non=sdhc type 4Gb Card.
Thank you
jose
josedias said:
Yes is a SDHC, So the qtek 9000 need a non=sdhc type 4Gb Card.
Click to expand...
Click to collapse
Exactly...I'm using a 4Gb transcend non-HC and it's works find ...!! I heard about problems concerning the SDHC for the universal... Maybe you should change your SD
Transcend 4GB 'SD' card getting corrupted repeatedly
I have one annoying problem,It is the third time that my Transcend 4GB SD card got corrupted without any reason ( as far as I know ).
It goes like this --I just moved one .jpg image ( clicked with my Universal ) from main memory to card -- a my document--my pictures folder,then I checked it ,the entire my document folder is empty..around 150 MB.No data recovery tool can retrieve it.
The default file explorer and Resco explore read the card differently --950 Mb and 1100 MB respectively.The data is gone,the space 150 MB is gone.On previous two occasions,there was not any transfer of any data from device to card yet it happened .I had the card replaced,but it is very annoying to live in this impending possibility of losing the data.
What is the cause of this problem?WM6?Universal?ROM?4GB?Transcend?
I never had this problem with 1 GB cards.What is the solution?Please suggest something,anything.
There are a couple of WM6 roms which can corrupt your SD card.
But it shouldn't make a difference if you have a 512 mb card or 4 gb.
Did you upgrade to WM6 and then got the 4gb card?
You could try to flash back to the original wm5 rom from your manufacturer, good change the problem's gone then.
ROM change?
No Sir,
I did have this problem with WM5 and to get rid of it I shifted to WM6,but the problem persists.Other people with WM5/6 with 'NCP' 4GB are doing fine,I am also going to try it.Like I said I never had any problems with 1GB.
I like the HTML mail support in WM6 and I need it for the attachments so I'd rather keep WM6.
One more thing, the file explorer SOMETIMES shows two separate folders viz. storage card 1 & storage card 2, and in storage card 1 there are only files called mail attachments.At the same time all the today shortcuts and programmes on the card are 'uninstalled',Then I have to hard reset and install the back-up file and everything comes to normal.What does it mean?Please clarify.
kalya said:
One more thing, the file explorer SOMETIMES shows two separate folders viz. storage card 1 & storage card 2, and in storage card 1 there are only files called mail attachments.At the same time all the today shortcuts and programmes on the card are 'uninstalled',Then I have to hard reset and install the back-up file and everything comes to normal.What does it mean?Please clarify.
Click to expand...
Click to collapse
This is a known issue. Sometimes the system forgets about the exixstence of SD card. You can brows here for such cases. People claim that it happens while the battery goes low or for some other reason.
However, if this happens, and some of your apps are set up for using Storage Card for saving it's data, then the system creates a folder named "Storage Card" in the main memory. Then if you softreset or recharge your device, the system finds again your SD card and tries to give it a name "Storadge Card", but this already exists, so it names it as "Storadge Card1", and so on.
Solution:
Ither delete the "Storage Card" folder from main memory or rename it as you wish, and then rename your card as "Storage Card" and softreset your device. It should help.
okay
Tadeusz said:
This is a known issue. Sometimes the system forgets about the exixstence of SD card. You can brows here for such cases. People claim that it happens while the battery goes low or for some other reason.
However, if this happens, and some of your apps are set up for using Storage Card for saving it's data, then the system creates a folder named "Storage Card" in the main memory. Then if you softreset or recharge your device, the system finds again your SD card and tries to give it a name "Storadge Card", but this already exists, so it names it as "Storadge Card1", and so on.
Solution:
Ither delete the "Storage Card" folder from main memory or rename it as you wish, and then rename your card as "Storage Card" and softreset your device. It should help.
Click to expand...
Click to collapse
Okay,
Thanks for explaining and the simple solution.
But a soft reset doesn't solve it,reinstalling the backup(I use SPB)does.
But what about the card getting corrupted,losing data and vanishing folders?Is there any cause and solution for it? Or should I go for another card manufacturer as decided?
i have tested 1 gig sdhc
i have tested 1 gig sdhc toshiba class4 and it worked on universal
onlineemails said:
i have tested 1 gig sdhc toshiba class4 and it worked on universal
Click to expand...
Click to collapse
SDHC start at 2gb, you have a normal SD.
Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch.
mamaich said:
SDHC start at 2gb, you have a normal SD.
Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch.
Click to expand...
Click to collapse
mamaich, you are wonderful.
mamaich said:
SDHC start at 2gb, you have a normal SD.
Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch.
Click to expand...
Click to collapse
Does this patch involve physically deforming the SD Card such that its lifetime warranty (lifetime warranty is applicable to some SD cards only) becomes void?
Does this patch involve physically deforming the SD Card such that its lifetime warranty (lifetime warranty is applicable to some SD cards only) becomes void?
Click to expand...
Click to collapse
LOL
_____
RE
Quote
"Native universal SD driver does not support SDHC, the driver ignores CMD8 that is required for SDHC to work. I've purchased 8Gb card and can tell that after patching - Uni started to recognize it. But testing is required before publishing a patch"
Can it work with the Universal running WM5?
Thanks
FOSA said:
Can it work with the Universal running WM5?
Click to expand...
Click to collapse
Very curious to hear the answer to this as well!!
FOSA said:
Can it work with the Universal running WM5?
Thanks
Click to expand...
Click to collapse
no. WM6 aku 0.2 and later are required.
mamaich said:
LOL
_____
Click to expand...
Click to collapse
I always wished a scenario would come up where I could ask such a question and make it seem valid at the same time
How about 4GB SDHC?
If 8GB SDHC can be used then how about using a 4GB SDHC card?
And please make it possible,soon,Mamaich.Thanks.
http://www.geeks.com/details.asp?invtid=SD-S04GR4W&AID=10440852&CJPID=1260291
Has anyone tried this on a Wizard with WM6 installed? I know that there were some issues with HC card on Wizard.
SDHC cards aren't compatible with the wizard yet, even in WM6. To make sure I even checked my registery settings for the settings that would need to be there for them to work and they weren't there.
you may want to try "ordinary" 4GB miniSD cards:
http://forum.xda-developers.com/showthread.php?t=297324
There are more threads about that topic in the accessories section of the Wizard
Thanks..Xeno & Huckelberry88, I will try the standard Mini SD card. The only reason I was interested in Toshiba is because of the brand name. I hate ordering and trying a no name brand.
I have now a microSDHC 6gb in my p3600.
It is a Sandisk microSDHC 6gb in a microSD to miniSD adapter from Kingston.
I have about 4.5 gb data on it, many mp3's.
On this moment it works fine. Have anybody try this before?
(I have AX3L WM6 rom on my p3600)
Brilliant!
It boggles my mind why they have 6/8 gb micros, but not minis....soooo irritating. Guess I'll give your method a try since it seems to be working. Looking forward to more than 4gb on my phone!!!
Mike
Please tell me if you need any patch to do that?
I also have 3.0.8..AX3L WM6, please tel me if I need further patch or cab to enable my trinity SDHC compatible as when I was downloading the ROM I saw a SDhc cab I wasn't sure that time if I should had download & install it to make my trinity SDHC compatible. Plaese anybody guide me I'll be very thankful. I intend to buy 8gb sdhc. ???? please email me at [email protected] as I might loose track of this thread. Thanks
I have installed AX3L 3.1.1 Lite.
I didn't load a SDHC patch. I had buy a miniSDHC 4 gb and it works without a problem.
Now I have the MicroSDHC 6gb.
The 8gb MicroSDHC is comming in the next months.
Cool, thanks for the conformation that 6GB MicoSDHC’s with Micro>Mini adapters work in our WM6 Trinity.
Has anyone else tried a 6GB in a WM5 ROM by using the various patches around?
There are so many RegEdits and DLL’s floating around for SDHC support that I thought I’d try and collate them by viewing the contents of the CAB’s and doing some binary comparisons.
These are just my opinions and I welcome anyone who can correct/enlighten me.
1)
HTC_SDHCsettings.cab – 4.4KB
This one from lvsw basically adds a bunch of registry keys about BuiltIn SDHC and StorageManager but doesn’t add or modify any files.
2)
sdhc.cab – 66.4KB
This can be found all over the forum under different names. It adds two DLL’s but doesn’t add/modify the registry.
a) sdbus.dll – 47.4KB
b) sdmemory.dll – 15.4KB
3)
miniSD HC Patch v2.2.cab – 15.6KB
This one by AX3L adds the same sdmemory.dll from 2b and nothing else.
4)
SDHC drivers WM6.zip and here– 69.4KB
This has some extra fixes that have been proven to work in E-TEN’s.
a) sdhc.cab with the same two DLL’s as 2a&b.
b) Certs.cab – 4.59KB which adds a bunch of certifications (not sure what else it does).
After installing the two DLL’s to \Windows\ and the Cert’s, then you copy these two slightly different DLL’s across.
c) sdbus.dll – 47.8KB
d) sdmemory.dll – 15.8KB
I don’t have a SDHC to try this out on but will get one while in Japan next month. It would be nice if someone could try out a combination of these on WM5 to see if they work. I think a combination of 1 & 4 might do the trick
@ janegsm or anyone with AX3L 3.1.1 please check out these two sets of DLL’s and do a binary comparison with the ones installed on your ROM.
Would be nice to get some closure on this
OK, so I dumped AX3L’s 3.1.2c and did a binary comparison on the apparent DLL’s. As suspected they are different again to the previous DLL sets.
Only problem is, I don’t know what to do with the S000,S001,… files, convert them to reg entries? They mention reading the cards using block mode addressing and not byte mode addressing which is promising.
AX3L has pointed out on other threads that SDHC is controlled by many DLL’s and they are ROM specific, so I might just be talking round in circles, but if someone can do something useful with this then we might be able to get a working SDHC patch for the Trinity!
BTW janegsm, what class of MicroSDHC do you have? Class 4 appears to be most common at the moment.
im interested to know whether anyone has these running on a standard WM6 rom from HTC.
Also, are there any speed related issues with using microSD cards? there certainly are speed differences between SD and miniSD cards (mainly noticeable in my digital camera though).
Lastly, i can't seem to find any miniSDHC cards over 4gb. Is it just me, or there really isn't any out there? Why are there larger capacities for microSD and SD formats?
viperx said:
im interested to know whether anyone has these running on a standard WM6 rom from HTC.
Also, are there any speed related issues with using microSD cards? there certainly are speed differences between SD and miniSD cards (mainly noticeable in my digital camera though).
Lastly, i can't seem to find any miniSDHC cards over 4gb. Is it just me, or there really isn't any out there? Why are there larger capacities for microSD and SD formats?
Click to expand...
Click to collapse
Simple... electronics are getting smaller thereby the need to use a smaller card i.e. less real estate for the socket. Lots of companies are shying away from the mini to migrate to the micro. Mini manufactures see this trend and don't wish to spend resources developing and tooling for the mini when a micro with adapter will do the same thing. Hope this helps
umh, no one have try micro sdhc on WM5? the fix realy work?
where i can buy only micro to mini sd adapter? i have find only kingston package with micro to mini, micro to sd and micro sd of 1GB or 2Gb not more big.
I have WM6 ROM on my p3600.
I had buy a Sandisk microSDHC 6gb class 4.
Also I buy a Kingston 2gb micro, this is a set with 2 adapters: microSD to miniSD and microSD to SD.
I use only the sandisk 6gb and the microSD to miniSD adapter.
(I sell the 2gb MicroSD)
(When the Sandisk microSDHC 8gb comms I will buy the 8gb to.)
hauehuaEHUae
Take a look on this!!
http://www.mobileplanet.com/d.aspx?i=158255
bye!
I would like to try on my wizard with wm6 and SDHC kingston 4Gb. Have one that cabs worked? Any suggest to my download and trial?
just wonder how can micro-sd crad work in place of mini-sd ...anyone can tell me
evojulz said:
Cool, thanks for the conformation that 6GB MicoSDHC’s with Micro>Mini adapters work in our WM6 Trinity.
Has anyone else tried a 6GB in a WM5 ROM by using the various patches around?
There are so many RegEdits and DLL’s floating around for SDHC support that I thought I’d try and collate them by viewing the contents of the CAB’s and doing some binary comparisons.
These are just my opinions and I welcome anyone who can correct/enlighten me.
1)
HTC_SDHCsettings.cab – 4.4KB
This one from lvsw basically adds a bunch of registry keys about BuiltIn SDHC and StorageManager but doesn’t add or modify any files.
2)
sdhc.cab – 66.4KB
This can be found all over the forum under different names. It adds two DLL’s but doesn’t add/modify the registry.
a) sdbus.dll – 47.4KB
b) sdmemory.dll – 15.4KB
3)
miniSD HC Patch v2.2.cab – 15.6KB
This one by AX3L adds the same sdmemory.dll from 2b and nothing else.
4)
SDHC drivers WM6.zip and here– 69.4KB
This has some extra fixes that have been proven to work in E-TEN’s.
a) sdhc.cab with the same two DLL’s as 2a&b.
b) Certs.cab – 4.59KB which adds a bunch of certifications (not sure what else it does).
After installing the two DLL’s to \Windows\ and the Cert’s, then you copy these two slightly different DLL’s across.
c) sdbus.dll – 47.8KB
d) sdmemory.dll – 15.8KB
I don’t have a SDHC to try this out on but will get one while in Japan next month. It would be nice if someone could try out a combination of these on WM5 to see if they work. I think a combination of 1 & 4 might do the trick
@ janegsm or anyone with AX3L 3.1.1 please check out these two sets of DLL’s and do a binary comparison with the ones installed on your ROM.
Would be nice to get some closure on this
Click to expand...
Click to collapse
No luck with WM5. I tried all the options above (except #3) and the best I could get was to have a 6GB micro SD recognized as a 2GB card. Any solutions that will work with WM5 would be welcome, as WM6 is not an option for me right now.
astroganger said:
just wonder how can micro-sd crad work in place of mini-sd ...anyone can tell me
Click to expand...
Click to collapse
Pretty simple, with an adaptar mini sd for micro sd, same thing that u can use a mini sd as a simple sd card.
tedkyle said:
No luck with WM5. I tried all the options above (except #3) and the best I could get was to have a 6GB micro SD recognized as a 2GB card. Any solutions that will work with WM5 would be welcome, as WM6 is not an option for me right now.
Click to expand...
Click to collapse
Gutted, I still haven't heard of anyone getting this to work with a WM5 Trinity
Have you tried using AX3L's DLL's (from post 6 of this thread) after installing the certs.cab?
There has been a surprising amount of success here which is exactly the same as option #4 of my post you quoted.
I still don't have a SDHC card but will probably jump straight to the 8GB, although there still seems to be issues being able to see more than 4GB of the 8GB cards even using Trinity WM6.
Now I'm even more determined to get this working on WM5.
Still No Luck w WM5
evojulz said:
Gutted, I still haven't heard of anyone getting this to work with a WM5 Trinity
Have you tried using AX3L's DLL's (from post 6 of this thread) after installing the certs.cab?
There has been a surprising amount of success here which is exactly the same as option #4 of my post you quoted.
I still don't have a SDHC card but will probably jump straight to the 8GB, although there still seems to be issues being able to see more than 4GB of the 8GB cards even using Trinity WM6.
Now I'm even more determined to get this working on WM5.
Click to expand...
Click to collapse
I followed up on both of your suggestions. I tried the thread you pointed me to and I tried using AX3L's DLL's. The only thing I got out of the process was a lot of trouble overwriting the DLL's. When I succeeded, the cards were not showing up at all. Otherwise, the system only saw 1.7gb of my 6gb Micro SDHC.
Hi, I am trying to install the patch for SDHC on a HTC P3300 phone with WM6. I cant copy the dll files to the windows directory which seems to be read only but cant find a way to change that. Can someone help?
How do you copy files to windows directory?
I am trying to install the SDHC patch on a HTC P3300 phone. When I try to copy the .dll files to the windows directory it seems it is read only. I cant find a way to change this. Can someone please help?
New Problems with Micro SDHC Card, help needed
Problem: I was using a SanDisk 6GB MicroSDHC Card with MiniSD-Adaptor in my Trinity (P3600):
With the Original WM5 Rom there was no chance; when I switched to Bepe's WM6 German it was recognized at once and working (still I think a bit slower than a 4GB MiniSD Card) but the older my installation of WM6 got (or perhaps the MicroSDHC Card) the problems got worse: Very slow when using something that was on the Card and finally no chance to work with the card anymore. Then I formatted the card in my PC and did a new installation of the same Bepe WM6 ROM on my P3600. Since that time there is no chance to use the card in the phone: it doesn't get recognized, did't matter what I tried. But in my much older TyTN with WM6, the card works perfectly!?!
Maybe anybody has an idea. e.g.: I wanted to format it in my Trinity or TyTN, but I can't find any option for that.
(Funny: When I put on my camera in Trinity, it asks to use Main or Card memory, I chose card an it hangs (needs softreset); memory manager says no card at same time; I put the card out and in my TyTN and open explorer and can see that the trinity has made new my documents and pictures folders on the card???)
edit: Seems to be a Trinity failure: Now I tried my older 4GB MiniSD card and 2GB MiniSD card in the Trinity and it doesn't recognize any of it; so it should be a Trinity failure?
Does anybody have a clou what I could try to do or will the device have to go to repair?
Thanks a lot for any suggestions!
Hi Folks
I've trawled the forums but I can't see anything directly relational about this matter.
Basically I bought a 4gb SDHC card which didn't work, so I returned it. The replacement has the same issue. Having looked a bit around I found there was a hotfix from Microsoft (google ms hotfix sdhc).
Considering how people here use their PDAs I thought there would be some mention.
Perhaps I am the only one who does not have Windows up to date and thus this is the reason
Oh, and you need a validated XP to get this hotfix. Still, to be expected I suppose....
Some Secure Digital (SD) cards do not work correctly on Windows XP-based computers. Additionally, you may notice a yellow exclamation mark (!) next to the SD card in Device Manager.
This problem may occur even though you have applied other hotfixes that are required for high-capacity SD card support. For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base:
923293 (http://support.microsoft.com/kb/923293/) The 923293 hotfix adds support for SD High Capacity memory cards in Windows XP
934428 (http://support.microsoft.com/kb/934428/) Hotfix for Windows XP that adds support for SDHC cards that have a capacity of more than 4 GB
However, http://support.microsoft.com/kb/923293/ means that you need to tell them about your situation before they let you have the file. I've already downloaded 934428 so we'll see where that takes me
Which puts me back at square one, because I still can't read SDHC cards through the PC. I can access it through the PDA and it seems to work ok there but not through the actual card reader.
Thod
I believe the Microsoft hotfixes are specific to certain readers. Other readers (for example, the memory card slots on a monitor) use a different driver, which needs to be updated.
For example, I have a Dell 2405FPW, and it is not compatible with SDHC, even after the Microsoft hotfix. However, I can read my SDHC card using the USB adapter that came with the SDHC (actually microSDHC), even without the Microsoft hotfix.
These hotfixes are for XP not the device. The device can read it ok, but MS Windows XP can't!!!
I have got around it now. Plug the SDHC into the PDA, and the PDA into the computer. Bit slow but gets there in the end!
are you sure your card reader supports sdhc?
i had a (old) microsd to sd card convertor, that wasn't capible of reading sdhc? did the card reader come with your sdhc card?
I found out on the DELL official website the firmware upgrade for the reader and the SDHC Patch.
Problem is that they did the updates exclusively for there desktop brands and not for the DELL monitor apart.
So.. if someone can tweak the firmware and the driver to bypass these check routines, maybe we can succeed?
Here are the links:
Driver (SDHC Patch): http://support.dell.com/support/dow...1&impid=-1&formatcnt=1&libid=32&fileid=240264
Firmware:
http://support.dell.com/support/dow...1&impid=-1&formatcnt=1&libid=32&fileid=240271
I recently purchased a Toshiba R500 notebook which has a SD card reader built-in. I was unable to get my SDHC cards to work in it until I ran the XP SP3 upgrade on my Notebook. Apparently it has all of the new drivers included in the fix. Now the card reader works with all my cards including my 8gb microSDHC with SD adapter.
I have SP3 on my XP and that does not solve my problem
SP3 doesn't help! Boo!!!
Any one found a solution fro this problem. I just installed SP3 and still no dice reading Micro SDHC cards with builtin card reader or with usb readers. Readers will detect but say to insert a disk when an 4 or 8 gb card is inserted. 1 and 2 gb cards (non sdhc) seem to work fine.
Hot fixes will not install over SP3 says newer service pack already installed.
I guess ill try to get the wmstorage working on my device for the mean time, it is somewhat more quicker than using active synch for data transfers between my the device and computer.
Check under device manager what is the brand of your built-in card reader and google the company to see if they have a firmware update or new drivers for the unit.
wovens said:
Check under device manager what is the brand of your built-in card reader and google the company to see if they have a firmware update or new drivers for the unit.
Click to expand...
Click to collapse
Too bad, it seems to be generic... "Generic USB Card Reader Driver v2.2e4" eMachines site has a northstar media reader driver maybe I'll try that. I wsould do a search with vendor ID and Product ID but card reader seems to be inactive unless there is a card less than 2 gb installed. I'll also investigate that, after i locate a non sdhc card. No dice with the external usb reader either... vid 058f pid 6335. Found drivers for this guy but no firmware.
Maybe ill drop by an electronics store and see if any card readers indicate they can read sdhc cards. Active Sync xfers are sloooow! WM5storage is slightly faster, but not as quick as a working card reader...
older readers are not compatible with sdhc cards and only fix is a firmware upgrade
i got a microSdhc card and it could not be read by
sandisk cruze sd to usb using the sd->microSd conveter
thinkpad t61 with sd->microSd conveter
sandisk 8-1 usb reader sd->microSd conveter
but hp tx1270 had no problems using sd->microSd conveter
got a sandisk micoSD to usb thingy and everybody reads it just fine
I guess i need a new card reader!
Rudegar said:
older readers are not compatible with sdhc cards and only fix is a firmware upgrade
i got a microSdhc card and it could not be read by
sandisk cruze sd to usb using the sd->microSd conveter
thinkpad t61 with sd->microSd conveter
sandisk 8-1 usb reader sd->microSd conveter
but hp tx1270 had no problems using sd->microSd conveter
got a sandisk micoSD to usb thingy and everybody reads it just fine
Click to expand...
Click to collapse
My 8 gb micro came with a generic SD card reader and sd adaper, but no dice. My eMachines is kind of an older notebook, so im not surprised that i wouldnt work... I guess i was hoping newer drivers would correct this issue but no cigar. I had a transflash/micro sd reader that came with my DS Modchip but no dice with that either.
i will go to and look for a name brand card reader such as your sandisk adapter. At least with a name brand i will have better support than with my current generic readers.
Any additional info on your sandisk reader?
Thanks everbody for all of your help!
SanDisk MediaMate
jamorgan2008 said:
My 8 gb micro came with a generic SD card reader and sd adaper, but no dice. My eMachines is kind of an older notebook, so im not surprised that i wouldnt work... I guess i was hoping newer drivers would correct this issue but no cigar. I had a transflash/micro sd reader that came with my DS Modchip but no dice with that either.
i will go to and look for a name brand card reader such as your sandisk adapter. At least with a name brand i will have better support than with my current generic readers.
Any additional info on your sandisk reader?
Thanks everbody for all of your help!
Click to expand...
Click to collapse
Pocked up a SanDisk MediaMate SD+ at Staples. The reader works great!
i have a 4gb dane-elec micro sdhc card and it doesnt work on my htc tytn or my pc.
i tried doing the xp hotfix but it wont let me complete because it says i have sp3.it does work however in my nokia n95....i formatted it there many times but it my pc or tytn still wont detect it...
any help please?
i have brought it back to the store twice and the problem still remains....
Hello i Have a (HTC clone NT901??). I had to do a Hard reset, and after that i can't access the storage card. I have included some pictures.
As you can see SKtools detect the card, but not Windows 6.1.
I have tried other Sd cards with no results.
Note that i did not have any SD-card in my phone when the picture with expansion slot "Not in use" was taken.
Maybe someone has a bright idea what the problem might be.
Forgive my english, i'm Swedish.
I'm sorry if this is not the right forum for this ,but i don't know where else i would put it.
regards/MickeF
Edit: I have included my registryfile if someone could look through it.
*SOLVED* Bad soldering in SD-SLOT. Now the card work like a charm.
Check if the pins in the card reader are making contact with the SD card. I had the exact same problem with an iPAQ 210. I couldn't find any way to fix it, not hard resets or anything. Eventually the problem went away on its own(after a month or so). Hope yours eventually starts to work, sorry I couldn't be more help.
DisMountSdcard.exe???
I have looked in the windows directory an found a file called DisMountSdcard.exe
What is that? I have googled it but it did not find any answers. Someone?
I have looked in the registry to find if the exe loads but it don't.
It can't be deleted and says it is writeprotected.
Does the card work in another mobile or PC?
Might there be a problem with the partition or filesystem?
In windows desktop version hard drives are sometimes visible by programs but not windows. That suggest that the filesystem is currupt. Not shure how this works with flashcards and winmo.
Yes it works flawless in another original HTC phone and desktop computer.
Can somebody explain too me how it's possible for SKTools to see the card (only in SD information though), but not by WM 6.1.
I think it's the drivers ieg sdbus.dll or sdhc.dll, sdmemory.dll but i have tried to exchange them to others without results.
No one who can help me???
check the SD is well in other Mobile Phones,if well,just use some tool to format it?Really OK?I don`t have any idea,just try
New pictures
I have now tested my card in my son's Touch Viva (yes it works there) and i have attached the picture in SKtools. You can compare and maybe advice me what to do.
The first picture is with card in Viva, and second from card in my phone.
Dead forum??
Seems that no one is interested in this.
I just ran out of ideas.
If the card works in other computers or phones the card is ok.
If your phone can´t read ANY cards then the problem is your phone.
The next step is to find out if its a hardware or software problem.
It would be good to back up your phone and do a reinstall with a known good ROM. If that fails, then there is something wrong with your hardware. Have you tried cleaning the card slot?
I have cleaned the slot. One thing i don't understand is that SKtools detects the card in SD information as you can see here. If it was a hardware fault it wouldn't be detected att all.
[SD information]
Bus driver version 5.2
Slot 0
Host index 0,slot index 0
Inserted card Memory Card
Card type SD Memory
Interface mode 4 bit(s),Clock rate 25000000
have attached photo on the bad soldering at the sd-slot.
So are you 100% sure that´s the issue (ie. the soldering). If so, great news.
Well after i resolded the microsmall contacts it's working perfectly again. No problems att all with my 4gb SD-card.
Annoying though,but if you buy a chinese mobile maybe you can expect this.
Otherwise i love the phone. It has all the features i want and more, and is nice looking. Internal GPS,WIFI,3,2MP Camera etc.