Database Info

Disabling backlight on notification

Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!

To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?

he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on

I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily

slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.

if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too

I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.

I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)

Anyone has found the solution for this?
Thanks!
GM.

Hardware Buttons In Standby (A Serious Issue?)

I was a bit surprised to just discover, by accident, that whenever I press any of the front hardware buttons when my device is in standby then the Touch Cruise doesn't completely ignore them, it switches on the button-panel lights for a while and then they go off after the timeout. For the red hangup key it also makes a beep when the button is pressed as well as activating the button lights.
As far as I can tell this is all the device does, it doesn't switch on the screen or activate any of the functions associated with the buttons I press (as far as I can tell) but I still worry that if I accidentally get the TC in a position in my pocket (when I'm driving or just sitting down for instance) where I'm constantly activating a button then after a few hours I could either drain the battery unnecessarily by keeping the button lights permanently on and/or I could crash the device by swamping it with button-pressed messages.
Do other people see the same behaviour when their TC is in standby and is there any hack to disable this?
- Julian

Try going into Settings - System - Key Lock
and change it to the top option "Lock all buttons except power button"

Same suggestion - doesn't make a sound here
That DOES happen when he is locked and NOT in standby. Still then - the volume keys work which is not really desired but hey...

Thank you mouseymousey and SabbeRubbish. You fixed my problem, but not in the way you probably intended.
I'd just been narrow minded and assumed that, if this option was available, it would be in the Button settings app so I hadn't seen the Key Lock settings app. Thanks to you both I found this and, guess what, the top "Lock all buttons except power button" WAS set but my buttons still activated the backlight and sometimes beeped.
Confused, I changed the option to the bottom "Do not lock buttons" and it behaved as expected, i.e. any button press completely woke up the device. I then set the option back to the top "Lock all buttons except power button" and this time my problem is solved, i.e. no reaction whatsoever from pressing the front buttons.
Wierd. My TC obviously got itself into an odd state and toggling the button lock preference seems to have fixed it. I'll keep an eye on this one.
Thanks again for the invaluable advice.
- Julian

I shouldn't let misleading info lie here so here's my confession. This issue turned out to be nothing to do with my device getting confused about its key lock setting. The fact that it fixed itself when I toggled the key lock setting was a coincidence, what I did at the same time as toggling the setting was to also close down Conduits PocketPlayer which I had still minimised and running (although not playing any music) in the background.
The problem appears to be with PocketPlayer (PP) and is 100% reproducible. If PP is still running (even minimized) when the device is put into standby then I get the behaviour described in my initial post, close down PP before going into standby and everything is OK and the front buttons are totally inactive.
I have of course filed a bug with Conduits but the good news is that noone needs to worry about any generic TC/WM6 wierdness here.
- Julian

automatically locking the screen during a phone call

Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?

benjb said:
Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
Click to expand...
Click to collapse
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.

MrSmith22 said:
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
Click to expand...
Click to collapse
Ouch!

If i'm not wrong, S2U2 can turn display off during a call. Great software!
I've tried two progs more: PhoneScreenLock and InesoftAddressBook.
Inesoft provide many features including display switch off during a call.
Phonescreenlock keep the display on showing info about the call, locking the screen.. but with long conversation you may frie your ear
Bye
KK

Any updates on this one please? I have the same problem with running gazillion apps on my Polaris with my ear in call as benjb did.
Tried PhoneScreenLock - did not work well for me because its buggy (the lock screen pretty often appears somewhere BELOW the in-call buttons or start menu and needs to be switched to via closing in-call screen, which obviously renders it useless).
The InesoftAddressBook is not an option either, cause I already have other address book app and would like to stick with it (BTW my current address book has "slide-to-pick-up-call" feature, which makes me afraid that it would conflict with S2U2).
Sadly the Polaris doesn't have motion or light sensor... It would make my life sooooo easier with ZuinigeRijder's TouchLockPro...
So any ideas on what else I could use please? Thanks!

two things...
1) Are you aware that after you answer/make a call but before you put the phone up to your ear you can press the power button (not press & hold, just press & release) which will turn off the display, but not disconnect your call (or, turn off your phone)? No stray on-screen button pushing this way! With the screen off the "end call/hang up" button still functions and when you press it the screen will come back on immediately. If you need to access your address book or make a note etc during a call, press & release the power button and it will turn the screen back on and not effect your call in any way. If your phone is set up like mine and it returns to the home screen each time the screen is turned on, then simply press the green phone button and the dialer comes back to the top.
2) If #1 doesn't do it for you and you need software to accomplish this, then search this forum for MissedCallReminder (just like that - no spaces). Besides having an option to "lock screen on connect" it has a very handy feature (the main feature actually, as the name indicates) of being able to set up repeat reminders for missed calls and missed sms messages. Very handy. It can be setup to run automatically at startup so you don't have to remember to start it up manually. It also automatically unlocks the screen when you end your call.
Turned out I had bookmarked the app, so here's a link:
http://forum.xda-developers.com/showthread.php?t=441593

Lock touchscreen during call???

I searched for about 30 minutes before posting this.. in both diamond and touch pro forums and all over here.. I figure this is a common issue, but still found nothing.
Is there any way to lock the touch screen during a call? I keep doing things with my cheek. I've written notes, assigned pictures to contacts, etc.!!! It's getting old. Anyway to fix that???

Press the standby button.
I intsalled the reg edit No_Sleep_Raph this stops the phone going into standby for voicemail or phone banking.
The phone will blank the screen depending on the power settings I have or standbye button.
If I accpet a call I normally press teh answer button and while putting it to my ear press the standby button

That maybe a solution...
I would think they would've done something like the treo phones..
They've got a setting to lock the screen during a phone call until you press a physical button... Or something like that. Worked great.
How difficult it would be to program something like that?

Have you tried this?
http://forum.xda-developers.com/showthread.php?t=425650

I haven't tried that yet. From what I read it seems like it will be good for not answering the phone inside your pocket... I didn't see anything about it locking
during a call... But I may have overlooked that, and I would assume it is one of the settings.
Can anyone confirm whether this program will allow you to lock the screen during a call and allow you to unlock it with a physical button?

Sorry, can't help you with that as it doesn't seem to work with the latest ROMeOS rom but IIRC you had to remove the stylus in order to use the touchscreen.

wrong post, sorry.

[Q] WP7 Phone App Registry Location

Hello everyone,
I have an unlocked Nokia Lumia 710 running a custom ROM and all in all the phone is good. However, the proximity sensor doesn't seem to work properly (I don't know if the problem is from the custom ROM or from the phone itself but it doesn't really matter) - when I'm in a call I keep pressing the Hold and Mute buttons (no matter how I hold the phone) which makes me really irritated. So I was wondering, there should be registries I guess that make the buttons active when pressed during a phone call. Can someone point me to the correct registries that control if the buttons are active or not when pressed so that I will hopefully be able to completely disable these two buttons (so that when pressed nothing happens)? I don't use them anyways, so completely disabling them would certainly fix my problems. I'm posting in the general WP7 section because I guess the location of these registries would most probably be the same for all phones...
Thanks a lot in advance!

There's a registry value that is updated automatically by the proximity sensor and indicates its current status system-wide, but I doubt you'd want to use it. For one thing, it would almost certainly get immediately reset by the sensor, faulty or otherwise. For another, the Phone app isn't the only thing that uses the proximity sensor; you would end up locking out the touchscreen in some other apps too. Finally, this would also prevent you from pressing the End Call button!
I don't know of a registry value that's specific to the Phone app's use of the proximity sensor. However, even if there is, the first and third reasons above still apply.
I instead recommend that you simply tap the power button when putting the phone up to your ear to talk. This will turn off the touchscreen (and incidentally save power) and you can tap the Power button again to access the Phone app or any other app on the phone when you need them, without interfering with the call.
There may also be a tool in some built-in Manufacturer or Diagnostics app that would let you test and adjust the sensitivity of the proximity sensor. This would perhaps be the best option, but I don't know where or if it exists on a Lumia.

What I want to do is not to play with the proximity sensor itself but rather with the buttons on the screen during a call. I guess I didn't make myself clear enough, sorry about that. The idea is that when I'm in a call, the proximity sensor does not work properly and I always press either the Mute or the Hold buttons. So, these buttons can still appear during a call but when you press them, I don't want anything happening. I mean, the idea is even when the phone is not next to your ear and the screen is active during a call, pressing the buttons to do nothing. I'm just following some simple logic, which might of course be incorrect (or too simple), but I'm thinking that there is most probably a separate registry for each button that controls whether this button does some action when pressed or not. I'm also hoping that they'll be separate registries for each button so that I can, for example, disable the actions for the Hold and Mute buttons, but leave the End Call button active. The problem is that I have no idea where to look for this registry since I'm still new to WP OS.
Heck, it would even be OK for me to completely remove the buttons from the screen during a call (or substitute the current buttons with some 1x1 px transparent images), if that's possible, so if someone knows how to do even that, tell me.
I was also considering using the power button when in call but I first want to see if there is any other way to do what I want. And since I'm not using the Mute and Hold functions at all, I just thought about disabling them.

No, I understood you. I was suggesting the "fix your proximity sensor" option because normally, the problem you're experiencing just doesn't happen; that's what the prox sensor is for. Sometimes it's miscalibrated, though, or something is covering it up (some poorly-cut or installed screen protectors do this, for example).
The "Phone" app isn't a Silverlight app like third-party ones; it's a native EXE that we pretty much can't modify without using a custom ROM. That's going to make changing it the ways you suggest (disabling or resizing certain buttons, etc) quite difficult.
I'm pretty sure you don't want to disable all the buttons always, even if that were possible. For one thing, that would prevent you from hanging up, as I mentioned before. It would also prevent you from dialing any numbers, which would make the use of touch-tone automated services impossible.
The Power button option really seems like the best fit for you. It's easy, doesn't require any hacks, doesn't break any other functionality, and should be the next-best solution beyond actually solving the problem.

I see now, makes sense. In my head it sounded simpler than what it really is. I was considering resizing the buttons because I'm also using iOS and I quite enjoy digging in the OS and changing some elements, so it's possible there to, for example, substitute some buttons with transparent 1x1 px images, etc. But that's irrelevant. Looks like WP is different and I still need some time to get in to it. Anyways, thanks for your help.
P.S. The screen protector was the first thing I "accused" but unfortunately it wasn't causing the problem.

On a custom ROM, you could definitely tweak the Phone app if you wanted to. However, the way WinCE (the kernel behind WP7) works, OS files are almost always marked as "in ROM" which means that the filesystem driver will refuse to modify them while the OS is booted. This makes tempering with the stock OS difficult; we have to find ways to modify the behavior of apps and system features without modifying the apps or features themselves.