Lock touchscreen during call??? - Touch Pro, Fuze General

I searched for about 30 minutes before posting this.. in both diamond and touch pro forums and all over here.. I figure this is a common issue, but still found nothing.
Is there any way to lock the touch screen during a call? I keep doing things with my cheek. I've written notes, assigned pictures to contacts, etc.!!! It's getting old. Anyway to fix that???

Press the standby button.
I intsalled the reg edit No_Sleep_Raph this stops the phone going into standby for voicemail or phone banking.
The phone will blank the screen depending on the power settings I have or standbye button.
If I accpet a call I normally press teh answer button and while putting it to my ear press the standby button

That maybe a solution...
I would think they would've done something like the treo phones..
They've got a setting to lock the screen during a phone call until you press a physical button... Or something like that. Worked great.
How difficult it would be to program something like that?

Have you tried this?
http://forum.xda-developers.com/showthread.php?t=425650

I haven't tried that yet. From what I read it seems like it will be good for not answering the phone inside your pocket... I didn't see anything about it locking
during a call... But I may have overlooked that, and I would assume it is one of the settings.
Can anyone confirm whether this program will allow you to lock the screen during a call and allow you to unlock it with a physical button?

Sorry, can't help you with that as it doesn't seem to work with the latest ROMeOS rom but IIRC you had to remove the stylus in order to use the touchscreen.

wrong post, sorry.

Related

Disabling backlight on notification

Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!
To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?
he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on
I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily
slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.
if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too
I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.
I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)
Anyone has found the solution for this?
Thanks!
GM.

Two little issues with locking and backlight

Hi Guys,
There are a couple of things I've not been able to get working in the way I'm used to on my Artemis, just wondered if anyone can help....
1) The require password when device is not used for x minutes, when set to 0 minutes on my Artemis, would only ask me for the password if it was coming out of standby... I'm trying to get the Polaris to behave in the same way. The gotcha with this is that having edited the settings on the Artemis, it doesn't behave like this anymore
What's actually happening is that when set at 0 minutes the device locks right away. I've now set it to 1 hour but now when coming out of standby I don't have to put the password in unless I leave it for an hour... Which is what it sounds like it should do, but not what I want, or what it WAS doing!
2) My backlight doesn't come on until I have fully unlocked the device... So I can't see the keypad or unlock button in daylight. My Artemis doesn't do this, the backlight comes straight on.
Any ideas are welcome
Thanks
LP
Wouldn't mind knowing about a reg tweak for the backlight/lock issue myself...
Screenlock? and backgrond light
I'v managed to get a screenlock function to work really nice. The Polaris is now always locked on start, exept for Answer/Reject soft and hardware buttons, plus that I can shut down the ringing with the volume button. Really nice.
The program that does it is Autolock. You find it att http://www.intelliott.com
The backlight problem was solved via a register hack found on this site.
At
\HKCU\ControlPanle\Backlight\LockLevel
Rename the folder to LockLevelX.
Does work even if the handset is soft resetted.
Thanks peta§,
That reg hack works pretty well
Any chance of a little more detail on the registry tweak. The backlight issue is really starting to annoy me.
Thanks
I followed the instruction in this link. It was quite easy:
http://forum.xda-developers.com/showthread.php?t=351709
peta§,do u know any registry tweak in order to disable key lock permanently?
Cheers Peta,
Worked a treat however, I don't understand why this was not done at the manufacturing stage unless it was purely an oversight.
Thanks
I agree MusicArtist, it should be activated in WM6 from the start. It's very interesting what can happen when you take your phone out of the pocket when a reminder calls for your attention, or a SMS or call is incoming and you by mistake presses some functions on the activated screen.
dene3erw, disabling key lock permanently? I don't follow. Do you mean the Autolock?
If so, ýou can find an icon in the Program folder, just to tap on it. It enables/disables the function.

automatically locking the screen during a phone call

Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
benjb said:
Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
Click to expand...
Click to collapse
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
MrSmith22 said:
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
Click to expand...
Click to collapse
Ouch!
If i'm not wrong, S2U2 can turn display off during a call. Great software!
I've tried two progs more: PhoneScreenLock and InesoftAddressBook.
Inesoft provide many features including display switch off during a call.
Phonescreenlock keep the display on showing info about the call, locking the screen.. but with long conversation you may frie your ear
Bye
KK
Any updates on this one please? I have the same problem with running gazillion apps on my Polaris with my ear in call as benjb did.
Tried PhoneScreenLock - did not work well for me because its buggy (the lock screen pretty often appears somewhere BELOW the in-call buttons or start menu and needs to be switched to via closing in-call screen, which obviously renders it useless).
The InesoftAddressBook is not an option either, cause I already have other address book app and would like to stick with it (BTW my current address book has "slide-to-pick-up-call" feature, which makes me afraid that it would conflict with S2U2).
Sadly the Polaris doesn't have motion or light sensor... It would make my life sooooo easier with ZuinigeRijder's TouchLockPro...
So any ideas on what else I could use please? Thanks!
two things...
1) Are you aware that after you answer/make a call but before you put the phone up to your ear you can press the power button (not press & hold, just press & release) which will turn off the display, but not disconnect your call (or, turn off your phone)? No stray on-screen button pushing this way! With the screen off the "end call/hang up" button still functions and when you press it the screen will come back on immediately. If you need to access your address book or make a note etc during a call, press & release the power button and it will turn the screen back on and not effect your call in any way. If your phone is set up like mine and it returns to the home screen each time the screen is turned on, then simply press the green phone button and the dialer comes back to the top.
2) If #1 doesn't do it for you and you need software to accomplish this, then search this forum for MissedCallReminder (just like that - no spaces). Besides having an option to "lock screen on connect" it has a very handy feature (the main feature actually, as the name indicates) of being able to set up repeat reminders for missed calls and missed sms messages. Very handy. It can be setup to run automatically at startup so you don't have to remember to start it up manually. It also automatically unlocks the screen when you end your call.
Turned out I had bookmarked the app, so here's a link:
http://forum.xda-developers.com/showthread.php?t=441593

Help: Touch Pro answers calls in pocket!

Hi!
I have a major problem with Pro. Had it for week and already I have missed many calls. Well, technically I've answered them :-(
The problem is that when a call comes in, the touch screen activates and if the phone is in pocket, it will very likely answer the call. It has done this many times and it does it so fast that the vibrating alarm doesn't even vibrate once. So I have no idea that somebody is listening to me in my pocket!
No, the button lock, doesn't seem to help here. Try it. Even with button lock on, you can answer the incoming calls with touch screen.
So what to do? I am really lost with this. Do I need to power off the phone completely when I'm on the road and only power it on when it's on the table? Yes, that works... and yes, it would be ridiculous.
One solution could be that when an incoming call is coming, one would need to enable the touch screen by pressing one of the hardware keys. And the call could be answered with the hardware keys also. After all, they do not press down easily in the pocket. But there is no way to set the phone this way AFAIK.
So, please guys help! (Google didn't help although Diamond users must have the same problem.)
I have the same problem!!! Didn't figured out a way to solve it by my own. It's realy annoying, especially if you do not want to answer at all to the person that is calling.
please, did anyone find a solution to this issue?
someone tried this and seem to work.
http://forum.xda-developers.com/showpost.php?p=2551522&postcount=124\
I would like to try it without changing the dialier
Source link is here
http://forums.whirlpool.net.au/forum-replies.cfm?t=988590&p=14#r263
Think a little app is required that blocks off touch screen as incoming call arrives.
Same problem on the Diamond :
http://forum.xda-developers.com/showthread.php?t=414731
I have tested the technique exposed by Carloshdez with CSDEVCTRL 3.28 and it works on the TP:
http://forum.xda-developers.com/showpost.php?p=2590105&postcount=188
I Followed his configuration, but entered "0" at the top for "Lock if Idle for Sec"
When the phone rings, CSDEVCTRL deactivate the screen but keep the hard keys activated.
Very complicated solutions it seems... I do not like to replace the dialler for instance. Hmmm.
Any solution where it would be possible to "open" the touch screen before doing anything to the call. I mean, it needs to behave so that
- the screen activates and you can see who is calling
- the touch screen is inactivate so that you do not accidentally answer it
- you can "open" the touch screen to
* answer
* hang-up
* mute
* i.e. all things that are now possible
This is because the hardware buttons do not give you all options, like mute and send text.
Hate to say, but iPhone style (or should I rather say Androind style) "slide to unlock" might be it as it's not that probably thing to happen in pocket. Are there such programs? And what do they do otherwise (that I probably do not want )?
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
What happens if the other party was the one to end the call (you did not end the call by pressing the end key), will it still unlock the screen or what?
dmsr66 said:
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
Click to expand...
Click to collapse
dmsr66 said:
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
Click to expand...
Click to collapse
You didn't get the mute part... I frequently want to mute the ringing WITHOUT answering or hanging up the call. Excellent feature BTW! Usually just to walk away from the current situation to quiet place to answer the call. Yes, I know I can do that with turning the phone upside down also, but there is also the text message option that I'm learning to use also.
I guess I need to try S2U2 then.
http://forum.xda-developers.com/showthread.php?t=422871
try this over S2U2!
Hm... turning my phone around before I can answer a call seems to me a little silly.
A simpel application would be more usefull.
fireblade63 said:
What happens if the other party was the one to end the call (you did not end the call by pressing the end key), will it still unlock the screen or what?
Click to expand...
Click to collapse
If the other party ends the call, the phone unlock. Actually it is only lock during "ringing"
paulyluca said:
Hm... turning my phone around before I can answer a call seems to me a little silly.
A simpel application would be more usefull.
Click to expand...
Click to collapse
I agree! Seems like an excellent idea, but the turning part seems complicated (risc dropping the phone, use 2 hands...?). I rather have something that can be done just by thumb of one hand.
(No, haven't had the possibility to try either one yet.)
The whole sensor thing is turning into a carnival, hopefully some real useful apps will be made using it.
EnOleEikka said:
I agree! Seems like an excellent idea, but the turning part seems complicated (risc dropping the phone, use 2 hands...?). I rather have something that can be done just by thumb of one hand.
(No, haven't had the possibility to try either one yet.)
Click to expand...
Click to collapse
I would apreciate a application that locks the phones touch screen while it rings and unlocks it after you answer (so that you can use it during the call).
Can't make this application, i'm not that smart, but maybe someone els can?
LE: I think this thread should be made "Sticky" until we find a solution, because we have here a real issue!!!
I am going to attempt to DEV an app like that, but I am sure one of the Senior's could dev this much quicker
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
anonimo said:
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
Click to expand...
Click to collapse
And that is how I've also answered and ended a call before I've slid the phone out of the pouch since the pouch is quite tight and activates the screen...
Need some other option on screen, like S2U, to 'unlock' the normal phone app' touch options first.
anonimo said:
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
Click to expand...
Click to collapse
It IS in his Pouch, and both in my pocket, but it answers itself the calls!!!!
The app should use the side bottons to MUTE the call.

Lock Screen during calls

Greetings all.
Does anyone know of a good way of locking the screen while making a phone call? I've tried proximity sensor, which does not work on my phone. I currently have my time out setting at 15 seconds, but that does not work either. Any help would be greatly appreciated, I'm sick of face dialing/hanging up.
Proximity sensor does not work at all for me, either. I have been begging and begging people on the forum to help come up with a way to remove or disable the huge "End call" button, as I am constantly hanging up on people with my face.
It is the number one suckiest thing about my Hero right now.
oh, i am looking for this kind of software but found nothing
Probably one of the best "answer/hang up" functions I saw was with SIPdroid. Slide up to answer, slide down to hang up. Of course, the data service is not good enough to always use that though.....
I put the notification bar down down, but it seems almost buggy, sometimes the notification bar stays down and sometimes it just moves up by itself again.
Hit the home button to get out of the dialer window...
Nanan00 said:
Hit the home button to get out of the dialer window...
Click to expand...
Click to collapse
And, then, enjoy the vibrations as you move your homescreen icons around with your face.
Why is there so much resistance to figuring out how to either lock the screen during a call or just disable or remove the stupid soft "End call" button?
Is it significantly more difficult than changing the button color or creating a ROM?
doojer said:
And, then, enjoy the vibrations as you move your homescreen icons around with your face.
Why is there so much resistance to figuring out how to either lock the screen during a call or just disable or remove the stupid soft "End call" button?
Is it significantly more difficult than changing the button color or creating a ROM?
Click to expand...
Click to collapse
Home button is cool if you happen to only touch the end call button and never anything else. I personally called a friend and sent 4 blank texts to someone, don't ask me how....
Home button will cause as many problems. Notification bar coming down is the best way I've found....
an even better way. hold the menu button down.
the keyboard is a great shield.
Avalaunchmods said:
an even better way. hold the menu button down.
the keyboard is a great shield.
Click to expand...
Click to collapse
I will try that one. Seems like it could work, thanks.
Well, google is my friend, i don't know why I doubted ye...
Screen Suite does it for me. The app is $1.99, but it has a setting where it automatically locks the screen on calls.
A bluetooth headset negates that problem completely......
muppetman462 said:
Well, google is my friend, i don't know why I doubted ye...
Screen Suite does it for me. The app is $1.99, but it has a setting where it automatically locks the screen on calls.
Click to expand...
Click to collapse
How do you like it? I found it and it seemed kind of bloated with a lot of features I don't need. Does it eat up memory/power?
I am interested....
I don't get why you guys are having so many issues with this, my phone screen locks at the default of 30s when in calls, it has done this as long as I have had the phone.
Nanan00 said:
I don't get why you guys are having so many issues with this, my phone screen locks at the default of 30s when in calls, it has done this as long as I have had the phone.
Click to expand...
Click to collapse
Mine usually does. Unless it thinks I'm pressing things with my face, which keeps it awake.
That is... if my face doesn't end the call by the time the 30 seconds is up. My guess? It's probably the shape of our faces?
I just try to hold the bottom part of the screen away from my face. Once the screen turns off I've never hung up on someone.
mrcharlesiv said:
I just try to hold the bottom part of the screen away from my face. Once the screen turns off I've never hung up on someone.
Click to expand...
Click to collapse
I do this too. It's very annoying.
Avalaunchmods said:
an even better way. hold the menu button down.
the keyboard is a great shield.
Click to expand...
Click to collapse
Hmm another good one! Any keyboard presses do anything nasty? I'm on swype but I wonder if hitting the mic button on the hacked keyboard would do anything annoying.
Thanks for the tip!
My main problem is when my wife calls, and wants to talk to my son. His face is a lot smaller, and well, everything get screwed up when he uses the phone. As for the program, it does have a lot of features, but all I did was have it set to auto-lock on phone calls. I still have my default vanilla lock screen.
Lack of a both a proximity sensor and dedicated screen-off button is this phone's single unforgivable flaw.
I will never again buy a touchscreen device without at least one of these.

Categories

Resources