Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!
To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?
he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on
I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily
slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.
if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too
I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.
I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)
Anyone has found the solution for this?
Thanks!
GM.
Hi there,
I have the following little prob with my Polaris:
whenever I make a call the display will go dark after a couple secs (which by itself isn't bad). However, seems like the polaris enters the standby-mode after acouple more secs, since I won't be able to touch the display to bring it up again-instead I will have to press the green or red button. This is a little annoying since I'm not able to easily access, e.g., the contacts during a call or press a key to, say, delete a message when checking my voicemails.
Any suggestions on how to tackle this?
Thanx
Two things you can do:
When you are in a call you can always press the power button and the screen will switch back on giving you access to all your applications and contacts, etc..
Better solution is to install the Backlite application. See http://forum.xda-developers.com/showthread.php?t=360657
This will stop the backlight switching off during a call. Works fine for me.
reteb said:
Two things you can do:
When you are in a call you can always press the power button and the screen will switch back on giving you access to all your applications and contacts, etc..
Better solution is to install the Backlite application. See http://forum.xda-developers.com/showthread.php?t=360657
This will stop the backlight switching off during a call. Works fine for me.
Click to expand...
Click to collapse
Thank you!
Yap, I knew about the power button but think hitting this one is a little annoying, too. What I'd aktually like is that - during a call - the display IS indeed turned off or at least dimmed down to very dark in order to safe battery. However, I'd like it to stay touch-sensitive and come back on if I touch it. Will the Backlite application do this for me?
Thanx again!
Elvez said:
However, I'd like it to stay touch-sensitive and come back on if I touch it. Will the Backlite application do this for me?
Click to expand...
Click to collapse
I think the point of making the screen "non touch-sensitive" during a call is that it is easy to touch it with your face during a call and you could end up disconnecting the call or doing other unexpected things.
anonimo said:
... and you could end up disconnecting the call or doing other unexpected things.
Click to expand...
Click to collapse
Hooray to unexpectedness!!
HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayD uringCall by "1" to "0"
Hi!
I have a major problem with Pro. Had it for week and already I have missed many calls. Well, technically I've answered them :-(
The problem is that when a call comes in, the touch screen activates and if the phone is in pocket, it will very likely answer the call. It has done this many times and it does it so fast that the vibrating alarm doesn't even vibrate once. So I have no idea that somebody is listening to me in my pocket!
No, the button lock, doesn't seem to help here. Try it. Even with button lock on, you can answer the incoming calls with touch screen.
So what to do? I am really lost with this. Do I need to power off the phone completely when I'm on the road and only power it on when it's on the table? Yes, that works... and yes, it would be ridiculous.
One solution could be that when an incoming call is coming, one would need to enable the touch screen by pressing one of the hardware keys. And the call could be answered with the hardware keys also. After all, they do not press down easily in the pocket. But there is no way to set the phone this way AFAIK.
So, please guys help! (Google didn't help although Diamond users must have the same problem.)
I have the same problem!!! Didn't figured out a way to solve it by my own. It's realy annoying, especially if you do not want to answer at all to the person that is calling.
please, did anyone find a solution to this issue?
someone tried this and seem to work.
http://forum.xda-developers.com/showpost.php?p=2551522&postcount=124\
I would like to try it without changing the dialier
Source link is here
http://forums.whirlpool.net.au/forum-replies.cfm?t=988590&p=14#r263
Think a little app is required that blocks off touch screen as incoming call arrives.
Same problem on the Diamond :
http://forum.xda-developers.com/showthread.php?t=414731
I have tested the technique exposed by Carloshdez with CSDEVCTRL 3.28 and it works on the TP:
http://forum.xda-developers.com/showpost.php?p=2590105&postcount=188
I Followed his configuration, but entered "0" at the top for "Lock if Idle for Sec"
When the phone rings, CSDEVCTRL deactivate the screen but keep the hard keys activated.
Very complicated solutions it seems... I do not like to replace the dialler for instance. Hmmm.
Any solution where it would be possible to "open" the touch screen before doing anything to the call. I mean, it needs to behave so that
- the screen activates and you can see who is calling
- the touch screen is inactivate so that you do not accidentally answer it
- you can "open" the touch screen to
* answer
* hang-up
* mute
* i.e. all things that are now possible
This is because the hardware buttons do not give you all options, like mute and send text.
Hate to say, but iPhone style (or should I rather say Androind style) "slide to unlock" might be it as it's not that probably thing to happen in pocket. Are there such programs? And what do they do otherwise (that I probably do not want )?
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
What happens if the other party was the one to end the call (you did not end the call by pressing the end key), will it still unlock the screen or what?
dmsr66 said:
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
Click to expand...
Click to collapse
dmsr66 said:
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
Click to expand...
Click to collapse
You didn't get the mute part... I frequently want to mute the ringing WITHOUT answering or hanging up the call. Excellent feature BTW! Usually just to walk away from the current situation to quiet place to answer the call. Yes, I know I can do that with turning the phone upside down also, but there is also the text message option that I'm learning to use also.
I guess I need to try S2U2 then.
http://forum.xda-developers.com/showthread.php?t=422871
try this over S2U2!
Hm... turning my phone around before I can answer a call seems to me a little silly.
A simpel application would be more usefull.
fireblade63 said:
What happens if the other party was the one to end the call (you did not end the call by pressing the end key), will it still unlock the screen or what?
Click to expand...
Click to collapse
If the other party ends the call, the phone unlock. Actually it is only lock during "ringing"
paulyluca said:
Hm... turning my phone around before I can answer a call seems to me a little silly.
A simpel application would be more usefull.
Click to expand...
Click to collapse
I agree! Seems like an excellent idea, but the turning part seems complicated (risc dropping the phone, use 2 hands...?). I rather have something that can be done just by thumb of one hand.
(No, haven't had the possibility to try either one yet.)
The whole sensor thing is turning into a carnival, hopefully some real useful apps will be made using it.
EnOleEikka said:
I agree! Seems like an excellent idea, but the turning part seems complicated (risc dropping the phone, use 2 hands...?). I rather have something that can be done just by thumb of one hand.
(No, haven't had the possibility to try either one yet.)
Click to expand...
Click to collapse
I would apreciate a application that locks the phones touch screen while it rings and unlocks it after you answer (so that you can use it during the call).
Can't make this application, i'm not that smart, but maybe someone els can?
LE: I think this thread should be made "Sticky" until we find a solution, because we have here a real issue!!!
I am going to attempt to DEV an app like that, but I am sure one of the Senior's could dev this much quicker
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
anonimo said:
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
Click to expand...
Click to collapse
And that is how I've also answered and ended a call before I've slid the phone out of the pouch since the pouch is quite tight and activates the screen...
Need some other option on screen, like S2U, to 'unlock' the normal phone app' touch options first.
anonimo said:
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
Click to expand...
Click to collapse
It IS in his Pouch, and both in my pocket, but it answers itself the calls!!!!
The app should use the side bottons to MUTE the call.
i'm quite sure this is a very common annoyance people have with touch phones.
80% of the time, when i answer a call and talk, once the call is finished i have a program opened/opening; due to my ear touching the display and doing things unknowingly to me.
especially with win6 or w.65, since the start menu button is on the top, it tends to be where the top of my ear touches and ends up opening programs (in wm6.5) in the start menu.
HOW can i easily prevent this? why has microsoft not resolved this design issue?
On my case 95% of the answered/maked calls are connected to my bluetooth
Also you can push the off button.
Cheers,
Yep, pushing the power button to turn the screen off will solve your problems. I use S2U2 which also has a feature to automatically switch off the screen.
As stated by the above poster S2U2 works as well as other applications that could be found by searching on google for "freeware applications wm".... hope that helps you
Using an AT&T LG G5 with android 7. (but posting here because the question is NOT LG specific, tested and observed same behavior on a Nexus 6P with android O beta).
So android has this neat "Screen Pin" feature so I can open the dialer, pin that screen and hand the phone to a friend who can make a call without access to anything else on my phone.
Sounds great but here is what actually happens: with the screen pinned, I can enter a number and press the place call button, the phone will show a message that you need to press the back and overview buttons to unpin the screen, the phone call screen will NOT come up, but the phone will actually place the call, so you are in a call but without a screen so you can't even hang up.
That makes the screen pin feature pretty useless for phone calls.
So does this work for anyone else? any suggestions that might make this work?
(not earth shatteringly important, but a nice feature to have if it actually worked).
Thank you