Related
I'd like to back up my ROM (and/or data) before playing around with my Rogers HTC Magic. AFAIK, the Rogers Magic still cannot be rooted (yet). My question is, can I still do a backup?
pls help.....i wanna back up my rogers htc magic ROM too
maybe I am confused, but I did not think there was any difference between GSM Magic's. there are some myths, but they seem to be rubbish.
in any event, I would also like to do a rom backup without rooting first
colonel said:
maybe I am confused, but I did not think there was any difference between GSM Magic's. there are some myths, but they seem to be rubbish.
in any event, I would also like to do a rom backup without rooting first
Click to expand...
Click to collapse
There are different radio versions. It is a known fact that for example the Rogers Dream and Magic cannot be rooted yet. Something like a different offset in memory where the ROM (or radio?) start.
minicris said:
pls help.....i wanna back up my rogers htc magic ROM too
Click to expand...
Click to collapse
parrot5 said:
There are different radio versions. It is a known fact that for example the Rogers Dream and Magic cannot be rooted yet. Something like a different offset in memory where the ROM (or radio?) start.
Click to expand...
Click to collapse
Parrot5 is right. HTC changed som internals on latest Magic phones. If you own a PVT 32A phone with SPL .0008 or .0009, you could give a try to daldroid-recovery.img from this thread:
http://forum.xda-developers.com/showthread.php?t=523680
You should be able to FASTBOOT the image and make a nandroid backup from the modified image running from your phone's RAM (no need to flash it).
BUT BEWARE, nandroid is not able to do a full raw image dump of your original rom, so there is no known way (I'm aware of) to backup your SPL and radio rom.
Furthermore version .0009 SPL doesn't allow to use "fastboot flash" (it checks digital signature of rom files) to reflash your backup files, so don't count on the how-to which tells you to do so. That's for modded SPL from haykuro.
Someone reported they were able to flash the modded SPL to unlock the flash from fastboot feature (the modded spl doesn't check for signed images) but no dumped image for your original SPL is available so you will not be able to restore it.
I didn't flash modded SPL so search the forum for info about that (please pay attention to check for confirmation by users with your same phone, hw, spl and radio rom)
Always check if the rom you wanna flash is compatible with your phone, I confirm HTC made some changes and the git sources for Android do not reflect latest Sapphire board implementation.
Hope this helps,
Daldroid
I'm abandoning this thread, since there are now too many ports to keep track of, so don't expect any updates. Just make sure that any rom you flash on your phone is 32A compatible. These roms all have modified boot.img, wlan.ko, apnconfig.xml, and possibly some other tweaks to sweeten the pot.
Rogers Original Wiped Rom
This is the stock Rogers rom in Nandroid format, unrooted. Use this if you really fowl something up and need to restore to the phones base (read: unrooted) settings. Note that this is a Nandroid backup, so restore it as such.
You can get it here:
http://thephishing.net/RogersRoms/Rogers-Wiped.zip
or here
http://rapidshare.com/files/248999555/Rogers-Wiped.zip
The Officicial HoFo Community ROM
Original Thread: http://forum.xda-developers.com/showthread.php?t=534415
Latest Version: 1.09
This is the stock Rogers rom, rooted and optimized by hotweiss of HowardForums.com. This is meant for people who like the original Rogers feel but want all the work done for them.
You can get it here:
http://www.4shared.com/file/119216485/70d5f022/hofo109.html
HTC Hero ROM for Magic by Fatal1ty
Original Thread: http://forum.xda-developers.com/showthread.php?t=531617
Latest Version: 1.4
This is the leaked Hero rom which has been ported by Fatal1ty to work with the Sapphire, then additional modifications were made to make it work with the Rogers Magic.
You can get it here:
http://thephishing.net/RogersRoms/Fatal1ty_Hero-Full_v1.4-ROGERS-signed.zip
Amon_RAs Hybrid Rom
Original Thread: http://forum.xda-developers.com/showthread.php?t=538645
Latest Version: 1.01
This is Amon_RAs specialty rom, which is a hybrid of a few existing roms (details in the original thread) which works with the Rogers Magic by default.
You can get it here:
http://rapidshare.com/files/258154910/Rom-RAv1.0.1H-signed-update.zip
CyanogenMod
Original Thread for Dream: http://forum.xda-developers.com/showthread.php?t=537204
Original Thread for 32B: http://forum.xda-developers.com/showthread.php?t=538633
Latest Version: 3.6.8
This is Cyanogen's specialty rom which was made to work like a Dream with the Dream (snicker), with additional modifications to make it work with the Rogers Magic.
You can get it here:
http://thephishing.net/RogersRoms/CyanogenMod[v3.6.8]-Rogers-signed.zip
nk02's ION Multi5
Original Thread: http://forum.xda-developers.com/showthread.php?t=523971
Latest Version: 4
This is the Google I/O Developers Conference Rom which is optimized to work with the Regular Sapphires by nk02, and additional modifications were made to make it work with the Rogers Magic.
You can get it here:
http://thephishing.net/RogersRoms/nk02ion_r4_FULL-Rogers-signed.zip
or here
http://rapidshare.com/files/252429857/nk02ion_r4_FULL-Rogersfixes-signed.zip
T-Mobile MyTouch3G Rom
Original Thread: http://forum.xda-developers.com/showthread.php?t=533641
This is the "supposed" shipped version of the T-Mobile MyTouch3G rom, ported to work with the Rogers Magic. Be advised, WiFi does not work.
You can get it here:
http://thephishing.net/RogersRoms/MyTouch3G-Rogers-signed.zip
or here
http://rapidshare.com/files/252457693/MyTouch3G-Rogers-signed.zip
Credits for the roms go to the original chefs. If you like their roms give them money!
If you are a Rogers user, than this thread might be able to help with any questions you might have regarding rooting, flashing, or restoring your roms:
http://www.howardforums.com/showthread.php?t=1545226
For kicks, here's all the Rogers, MyTouch, and Hero wallpapers:
http://thephishing.net/RogersRoms/Wallpaper.rar
great work sir. and thank you for all!
Thanks! This is much appreciated.
I think it might be worthwile to add in your list the ROM's modded by redglass. I've found them to work much better on my phone (32A Australia) as compared to the mod found on the Fatal1ty thread.
http://forum.xda-developers.com/showthread.php?t=531837
I tried loading the stock rogers rom last night, didnt seem to work, told me it was unsigned, or do i need to push each one of the files individually.
And also when trying to load the HOfo community rom downloaded from both of the links posted here it told me that one of the files was corrupted. can't think of the file off the top of my head, sorry.
EDIT: sorry i dont have the engineering spl
thanks.
this was much needed.
Thanks for this, used your guide and moded ROM on the weekend it's great. Now the wife wants it on hers as well.
Clinton
Thanks for this thread.
Could I flash any of these ROMS with just my rooted device or do I need to flash an SPL or something first?
Edit: nevermind, noticed the hofo link at the bottom of your post...
Thank you Skittles
Skittles,
This is awesome. Thanks for taking the time to dedicate a post to us Rogers users. I totally appreciate all the work you have put in and all those who you have worked in concert with to arrange these wonderful opportunities for us to play!!!
I look forward to seeing if any of the users here report happy findings!
Adam
SKITTLES Quick Question
By the way Skittles,
Do we HAVE to flash the SPL in order to use other roms? I heard SPL/Radio switching is the big danger. Can I install the hero rom just without flashing the SPL?
Adam
adampollack said:
By the way Skittles,
Do we HAVE to flash the SPL in order to use other roms? I heard SPL/Radio switching is the big danger. Can I install the hero rom just without flashing the SPL?
Adam
Click to expand...
Click to collapse
I believe you should be able to flash this to a Rogers Magic without changing your SPL, but changing your SPL makes it possible to make and restore Nandroid backups (which helps like crazy) so I would still recommend it.
skittleguy said:
I believe you should be able to flash this to a Rogers Magic without changing your SPL, but changing your SPL makes it possible to make and restore Nandroid backups (which helps like crazy) so I would still recommend it.
Click to expand...
Click to collapse
I have made a nandroid backup already using the daldroid-recovery.img and the fastboot process. As far as I know I did this stuff without making any changes to my device. A raw backup through fastboot.
However, would I be unable to flash back the boot.img, recovery.img, and system.img using this same daldroid-recovery.img fastboot process?
What is the difference between what I am describing and actually changing or flashing the SPL version.
I just want to do this safely and be able to restore to factory (or stock) version of phone for warranty purposes.
Thanks skittles,
You rock,
Adam
adampollack said:
I have made a nandroid backup already using the daldroid-recovery.img and the fastboot process. As far as I know I did this stuff without making any changes to my device. A raw backup through fastboot.
However, would I be unable to flash back the boot.img, recovery.img, and system.img using this same daldroid-recovery.img fastboot process?
What is the difference between what I am describing and actually changing or flashing the SPL version.
I just want to do this safely and be able to restore to factory (or stock) version of phone for warranty purposes.
Thanks skittles,
You rock,
Adam
Click to expand...
Click to collapse
You technically could by using the Amon_RA's new recovery (it has the option for Nandroid restore). I have yet to try it with the stock SPL, but you probably could.
http://forum.xda-developers.com/showthread.php?t=530492
Typically, restoring a rom backup is done through fastboot, which is why you need an engineering SPL which won't signature check.
skittleguy said:
You technically could by using the Amon_RA's new recovery (it has the option for Nandroid restore). I have yet to try it with the stock SPL, but you probably could.
http://forum.xda-developers.com/showthread.php?t=530492
Typically, restoring a rom backup is done through fastboot, which is why you need an engineering SPL which won't signature check.
Click to expand...
Click to collapse
Well I would prefer to stick to things the way you have done them already. I appreciate you trying everything first, of course.
So Do you recommend I just go with your guides. They are entirely reversible down to the bootloader?
Adam (Thanks for rocking my Android world!)
skittleguy said:
HTC Hero ROM for Magic by Fatal1ty
Original Thread: http://forum.xda-developers.com/showthread.php?t=531617
Latest Version: 1.4
This is the leaked Hero rom which has been ported by Fatal1ty to work with the Sapphire, then additional modifications were made to make it work with the Rogers Magic.
You can get it here:
http://thephishing.net/RogersRoms/Fatal1ty_Hero-Full_v1.4-ROGERS-signed.zip
Click to expand...
Click to collapse
The HTC Hero ROM for Magic by Fatal1ty (HERE) is for Google branded device (32B).
You can find the HTC-branded version HERE.
Thanks for all your help and all you work. 1 quick question about the hero rom, how do i get my phone to only check for email once a day
oh and how do you shut and open app, like browser
Anyone try that MyTouch3g rom yet?
just installed the ion version on my Australian 3 HTC magic! Modded a few images to how i like it before applying but so far so good.... when i get a bit more game will have a more in depth shot at theming it.....
any chance of theme template for ion or Hofo?
***EDIT**** well, it was working well, i have been using the overclock widget and twice now it has crashed the phone into a bootloop...no more overclock widget- esp. as the wife is yelling at me to come to bed! anyone else experienced this rom crashing like this?
Hello.
So I have installed the HTC Hero ROM for Magic by Fatal1ty successfully.
All is working well but for some MMS messages doesn't work anymore? SMS works fine.
[email protected] first off thanks a lot for your hard work =D
for the nk02's ION Multi5 rom do you happent o have a lite v4 version ? i just don't the hero skin... or maybe if there is a way to remove the skin that you know of?
A friend of mine purchased a Dream. Even though it has a 32B motherboard, it has the same SPL (1.33.0010) and Radio (3.22.20.17) as my 32A Magic. Since it has the perfected SPL I used the Flashrec program to flash a new recovery image. However all the Amon Ra recovery images for the dream didn't work. Eventually I let Flashrec automatically download a recovery image. It said that the phone was an EBI1/32A and downloaded Cyanogen 1.4.32A recovery image. This recovery image actually worked, so I tried loading a few Hero Roms for the Dream. Unfortunately none would boot.
I've scoured the forums can't really find a solution. This post http://forum.xda-developers.com/showthread.php?t=574561 suggests that a ROM with a 32A kernel is required. Would this mean that 32A magic ROMS would work with an EBI1 Dream? Which ROM should I try?
Also I'm not really keen on changing the SPL or radio as my Magic works perfectly running MyHero 2.0.5 and RAv1.2.1H recovery ROM
ramka said:
A friend of mine purchased a Dream. Even though it has a 32B motherboard, it has the same SPL (1.33.0010) and Radio (3.22.20.17) as my 32A Magic. Since it has the perfected SPL I used the Flashrec program to flash a new recovery image. However all the Amon Ra recovery images for the dream didn't work. Eventually I let Flashrec automatically download a recovery image. It said that the phone was an EBI1/32A and downloaded Cyanogen 1.4.32A recovery image. This recovery image actually worked, so I tried loading a few Hero Roms for the Dream. Unfortunately none would boot.
I've scoured the forums can't really find a solution. This post http://forum.xda-developers.com/showthread.php?t=574561 suggests that a ROM with a 32A kernel is required. Would this mean that 32A magic ROMS would work with an EBI1 Dream? Which ROM should I try?
Also I'm not really keen on changing the SPL or radio as my Magic works perfectly running MyHero 2.0.5 and RAv1.2.1H recovery ROM
Click to expand...
Click to collapse
Questions are best answered in Q&A section, and anyway do you have the danger spl and new radio. You need these to run hero
Oops my bad, perhaps a moderator could move it. It has the perfect SPL and version 3 radio. The exact same ones I have on my Magic which runs a Hero Rom
ramka said:
Oops my bad, perhaps a moderator could move it. It has the perfect SPL and version 3 radio. The exact same ones I have on my Magic which runs a Hero Rom
Click to expand...
Click to collapse
Well the g1 needs the new radio and Danger spl.
JAguirre1231 said:
Well the g1 needs the new radio and Danger spl.
Click to expand...
Click to collapse
Sorry, don't mean to sound rude...but you don't understand the question. He's asking if it will work as-is, since other devices with 32A radio/recovery run Hero ROMs just fine.
To the OP, this is something currently being discussed in the following thread:
http://forum.xda-developers.com/showthread.php?t=581165
I'd suggest reading up on that thread to see what progress they've made with getting ROMs to boot on a 32B Dream with 32A recovery/radio. Hopefully that will help you out!
TemporalShadows said:
Sorry, don't mean to sound rude...but you don't understand the question. He's asking if it will work as-is, since other devices with 32A radio/recovery run Hero ROMs just fine.
To the OP, this is something currently being discussed in the following thread:
http://forum.xda-developers.com/showthread.php?t=581165
I'd suggest reading up on that thread to see what progress they've made with getting ROMs to boot on a 32B Dream with 32A recovery/radio. Hopefully that will help you out!
Click to expand...
Click to collapse
It's ok always open to corrections
I would recommend trying a kernel and 32B ROM combination in this thread:
http://forum.xda-developers.com/showthread.php?t=564949
It would be great if a mod could please sticky this so that we do not continue to get random threads and confusion.
I have decided to make this thread because there are a LOT of EBI1 users out of the loop, i my self just a few weeks ago (after 3 months) learned that EBI1 users can use more than just cyano.
Ok, with the recent rogers mandatory update the EBI1 community has grown quite a bit.
You may be wondering what is EBI1?
well, it is the radio version 3.22.26.17, this radio is on the rogers dream and on sapphire/mt3g/magic phones as well.
On the dream it is known as EBI1/32b on the magic it is EBI1/32a
You can check to see if you have the EBI1 radio buy booting into fastboot mode(hold camera when booting) and look where it shown radio. If it says 3.22.26.17 on the screen anywhere, you are EBI1.
If your phone falls under the EBI1 category you have a few options
1) you can go to www.briancrook.ca and use any EBI1 kernel ports from his website. He is the guru of EBI1 ports and will have the most trustworthy of ports.
2) You can visit the sapphire dev forum (on xda (just below the dream/g1 forum)) Here you can download any kernels ports that are listed as 32a or old radio. The old radio/32a sapphire has the same EBI1 radio as the rogers dream!
3) OR most importantly, you can make your OWN ports using this simple tool:
http://faruq.yandao.com/magicport/
We can credit arctu for this amazing tool!
-just extract the rom you want to use
-in the extracted folder you will see a boot.img
-in the program browse and select the boot.img
-choose your settings (minimal is optimal)
-It will create you a EBI1 kernel!
there is a discussion of this tool in the sapphire dev forum.
you may now be asking, what do I do with the port file?
Well, once you get your kernel port,
-You go into recovery (preferably amon because you can flash multiple zip files)
-Flash the desired ROM
-Flash your Kernel Port
-You're done!
We must also be careful when it comes to recovery images
Your recovery is an amazing tool and can save your phone from disaster. Remember: always make a nandroid (or nandorid +ext3) backup before flashing a new ROM!!!!
My personal favourite recovery is Amon's, it is great because it has all the features you could ever want, plus it is great for EBI1 users because you can easily flash multiple zip files without rebooting (which is what you do when flashing ROMs on an EBI1 phone)
You must be careful what recovery you install
EBI0 recoveries are not compatible with the EBI1 radios, you can BRICK your phone, when installing a recovery make sure you install the EBI1 version
With Amon's recovery the EBI1 version is the "R" version. A direct download to the recovery is here:
http://rapidshare.com/files/32033517...am-v1.5.2R.img
I would highly suggest visiting his thread for instructions on use and installation:
http://forum.xda-developers.com/showthread.php?t=566669
G1 devs please listen up:
Inorder to run your ROMS on EBI1 phones we need to make a kernal to flash over the ROM. This means that your existing kernel will be replaced, this is always a negative for us as your kernels create large improvements.
One method you can use to help reduce the gap between you regular rom and an ebi1 version is to:
1) Optimize your ROM to run at its best without any special kernal adjustments
***2) If your ROM utilizes the 10MB ram hack, please also release a non ram hack version.
The reasoning behind this is that the ROM is ment for the ram hack so 3d and hq doesn't work properly on the ROM, when we flash our EBI1 kernel over the ROM, the ram hack is gone. The result is a ROM which has the set backs of the 10MB hack (no 3d, no HQ) AND it DOES NOT get the positves if the hack (we do not get the extra 10MB)
3) Create your own EBI1 ports
thanks to ottawanate:
minimum requirements for porting a ROM to EBI1 are
1) wlan.ko patch or wifi wont work
2) boot.img with Kernel config file marked for CONFIG_MSM_AMSS_SUPPORT_256MB_EBI1=y
Please consider the now vastly larger EBI1 community when making your ROMS, thank you!
Here is a list of Devs who the EBI1 community applauds for making showcasing their EBI1 compatibility friendliness:
King Klick
enomther
If you are a dev and would like to be added to the list please post here and let me know or PM me. (with a link preferably to the page with your ROM/Kernel)
What is EBI1
EBI1 is actually a term derived from the kernel config file. When the line 'CONFIG_MSM_AMSS_SUPPORT_256MB_EBI1=y' is set, the kernel supports 32A Magics and the 3.x series radio.
The kernel itself sits in your boot partition. Typically you flash a boot.img file to your phone to install the kernel. The kernel boots up your system after the boot launcher.
So I prefer to call the 3.x series radio the EBI1 kernel radio, since EBI1 refers to support for 32A Magics as well.
Any 3 series radio needs the EBI1 kernel. So that would include 3.22.20.17. There's another one floating around and installed stock on some 32B Magics (notably from Europe).
If you have the source code of the rom you want to flash, you can build your own kernels by following the instructions here:
http://wiki.cyanogenmod.com/index.php/How_to_build_a_kernel_port
What to pay attention to if I have a 3.x series radio and need the EBI1 kernel
Well first of all you need a ROM with the EBI1 kernel. First of all, the kernel itself is located in your 'boot' partition. Hence you need to be careful when flashing any update.zip files from recovery, because they may overwrite your EBI1 kernel, if it contains a boot.img. To make sure, just open the zip file to view its contents before you flash it. For example, the RAM hack requires a different kernel than the original, and application of it necessitates that you flash a new boot.img. However all the boot.img RAM HACK kernels are being provided without EBI1 support.
In addition to the kernel itself, the wireless drivers need to be recompiled to make it work with the different kernel. This file is wlan.ko. If you do not have a compatible version installed, your wireless lan will not function, which can cause your phone not to boot properly into the system, as it would freeze trying to startup your wireless lan.
The kernel goes hand in hand with your system rom to make your phone work. So if you update your system rom, you typically have to update your kernel as well.
It would be also useful to note that having the 3.x series radio requires you to have a different recovery image than if you didn't have the radio.
What happens if I install the wrong one?
Installing the wrong kernel is not destructive to your phone. If you have the wrong kernel installed, your phone will freeze after the first boot screen (non-animated). Don't worry about installing the wrong kernel.
What if I want to change to the 3.x series radio from the 2.x series radio or vice versa?
Changing to the 3.x series radio does have advantages for certain people. However, changing the radio is can brick your phone if you do not have the correct recovery flashed before changing your radio. There should be ample information on xda to help you with this process.
Other Stuff
The current active roms with EBI1 ports that I know of that work on my Rogers Dream:
Super D
Cyanogenmod
OpenEclair
Question to the OP: Does the WesGarner EB1 kernel include the 32b/dream RAM Hack?
very nice addition, to the post!
I have not personally tried a wes ROM before but i am going to assume that it does not, if anyone knows please telll us!
This thread http://forum.xda-developers.com/showthread.php?t=624545&highlight=ebi1 says I need DangerSPL first. If I used cyanogen wiki here http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod to change my spl will it work?
U can add my AOSP 2.1 to the ebi1 support list
the no wipe update for it is in my op
kingklick said:
U can add my AOSP 2.1 to the ebi1 support list
the no wipe update for it is in my op
Click to expand...
Click to collapse
I added your name to the OP as an applauded dev by the EBI1 community.
Used http://faruq.yandao.com/magicport/ to port this ROM, using the No-Wipe update for No RAM Hack kernel. Worked perfectly! Thanks to King Klick, asb123, and Faruq!
Zoltair Wright said:
Used http://faruq.yandao.com/magicport/ to port this ROM, using the No-Wipe update for No RAM Hack kernel. Worked perfectly! Thanks to King Klick, asb123, and Faruq!
Click to expand...
Click to collapse
how is that ROM in terms of 1)speed 2)stability when compared to the eclair ROMS?
also, what exactly do you mean you used the no ram hack kernal, did u flash ROM, flash the no ram hack kernal, then flash the ebi1 kernal you made? if so, i think that would just over right the no ram hack kernal.
Or does the kernal GIVE it ram hack? thus the ROM itself doesnt have the hack built in?
on a side note:
I want to run a hero ROM but I think they are 1.5 based so I cannot use the tool on them. If anyone has any info on getting a Hero ROM working on EBI1 plz let us know.
Macmee said:
This thread http://forum.xda-developers.com/showthread.php?t=624545&highlight=ebi1 says I need DangerSPL first. If I used cyanogen wiki here http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod to change my spl will it work?
Click to expand...
Click to collapse
yeah, you are going to need the danger SPL, you can follow that guide right there to get it. 1) Do you have root? if so all you need to do is skip to the part about flashing the spl zip file. if you have root i am going to assume to can get into recovery, 2) make sure you have amon's recovery (it makes things so much easier because with ebi1 you need to flash multiple zip files to get up and going at once.
please answer #1 and 2
For what its worth
I use a HTC Dream from Roger's on AT&T here in the US.
At first I used the tmobile radio 2.xxxx.
Then I read that there are higher speeds with the Rogers Radio (3.xxxx) while on EDGE.
I have done side by side tests, and at least for me, there was not a considerable speed change between EDGE speeds on either radio.
So for now, Im back to the tmobile radio.
does this mean all the lousy 32a users can use supported ROMs NOW?/ lol I dont want them all over here now, they are all snotty about G1 users being over in the Sapphire Section
Hi everybody
I just have a Dream Rogers, I have root and installed 4.2.14.1 Cyanogen. My radio is 3.22.26.17 and the SPL is Haykuro 1.33.2005 . Now I want to try the other rom requires 2.xx radio and a different SPL, I can change them or not ?
Please help me because I want to try the other 2.0 2.1 roms but not more experienced, I'm afraid to brick my phone.
Thanks so much.
asb123 said:
yeah, you are going to need the danger SPL, you can follow that guide right there to get it. 1) Do you have root? if so all you need to do is skip to the part about flashing the spl zip file. if you have root i am going to assume to can get into recovery, 2) make sure you have amon's recovery (it makes things so much easier because with ebi1 you need to flash multiple zip files to get up and going at once.
please answer #1 and 2
Click to expand...
Click to collapse
1) I have root. I followed the rogers cyanogen guide by the book so that's currently exactly what I have. Can I just flash directly to this rom?
2) I don't know how to get amons recovery.
ok, so if yo have root u probably have a recovery image (cyanogen) you want to get amons,
go here:
http://forum.xda-developers.com/showthread.php?t=566669
download the R version, i would probably use the via terminal instructions as i think they are the easiest!
once you have that come back here.
Raziel2 said:
Hi everybody
I just have a Dream Rogers, I have root and installed 4.2.14.1 Cyanogen. My radio is 3.22.26.17 and the SPL is Haykuro 1.33.2005 . Now I want to try the other rom requires 2.xx radio and a different SPL, I can change them or not ?
Please help me because I want to try the other 2.0 2.1 roms but not more experienced, I'm afraid to brick my phone.
Thanks so much.
Click to expand...
Click to collapse
when it says you need 2.xx radio, it is usually false, what it should say is that you need the latest radio (ebi1 works)
you dont need to change anything to work a 2.1 ROM, just follow the instructions in the original post, if you do not yet have amon's recovery, follow the post above this.
p.s. I dont think you can change the radio now that you have flashed your SPL, it will BRICK yor phone.
nicknowsky said:
does this mean all the lousy 32a users can use supported ROMs NOW?/ lol I dont want them all over here now, they are all snotty about G1 users being over in the Sapphire Section
Click to expand...
Click to collapse
well, the only reason they focus in the sapphire section is because nobody took charge and made a EBI1 thread in the g1 section, we could always use "supported roms" we just needed kernels.
asb123 said:
ok, so if yo have root u probably have a recovery image (cyanogen) you want to get amons,
go here:
http://forum.xda-developers.com/showthread.php?t=566669
download the R version, i would probably use the via terminal instructions as i think they are the easiest!
once you have that come back here.
Click to expand...
Click to collapse
Ok. What about SPL, will the one from the cyanogen tut work?
yeah, follow that guide for your SPL, if you have root i think you can just skip the first part (as its about getting root, if i remember correctly)
asb123 said:
yeah, follow that guide for your SPL, if you have root i think you can just skip the first part (as its about getting root, if i remember correctly)
Click to expand...
Click to collapse
erm. Follow what guide?
once you have root and have amon's recovery,
go here:
http://wiki.cyanogenmod.com/index.p...ers_Dream_EBI1_to_CyanogenMod#SPL_Replacement
skip down to the SPL replacement part to get the 1.33.2005 SPL
I have a HTC Magic from Rogers Wireless and I'm trying to flash a new Radio onto it. Fastboot will send the new radio over to the phone but when it attempts to write it the screen on the phone will go blank with some funky lines running down it. Even leaving it for 20min, the radio still not written. Phone is OK after pulling the battery but sill on existing Radio
Here are the specs on my phone
Sapphire PVT 32A
SPL 1.76.2007
Radio 3.22.20.17
Recovery RA-sapphire-v1.6.2H
Rom CM 5.0.7 Test 3 with EBI1 Port
I'm trying to flash Radio 3.22.26.17 from the Rogers HTC Dream E911 update onto the phone so that Rogers will not cut off the data when the old radio is detected.
Thanks!!
Actually, how did you managed to install that SPL with that radio...
The SPL you are using is made for Radios 6.* not 3.*...
I ran the Rogers RUU from last summer then used flashrec to inslall cm recovery.
I used cm recovery to flash the 1-76-2007 SPL then I flashed RA recovery (recovery-RA-sapphire-v1.6.2H.img). Did a nandroid backup and then wiped & flashed the files necessary for CM.
If this incorrect what SPL should I be using, I can always revert back and start over again.
Thanks!!
You can probably use the steps here to solve your issue.
http://forum.xda-developers.com/showthread.php?t=621890
Blasphemy.
If you wish to link to a guide then link to a proper one - one by CursorDroid, not a copy of it. (now there are credits, but back at the day when it was written the author did not give credit to people he should have.)
Here it is :http://forum.xda-developers.com/showthread.php?t=605239
You could also try the tool from my sig.
eyegor said:
Blasphemy.
If you wish to link to a guide then link to a proper one - one by CursorDroid, not a copy of it. (now there are credits, but back at the day when it was written the author did not give credit to people he should have.)
Here it is :http://forum.xda-developers.com/showthread.php?t=605239
You could also try the tool from my sig.
Click to expand...
Click to collapse
My apologies. I just happened across this, verified it worked and suggested it as a solution. I wasn't trying to cause any problems or dredge up any hard feelings. Just trying to help the OP solve his problem.
It does provide the solution to his issue, does it not? I agree, the people who dedicated their hard work should have been thanked properly, but at the time I linked there, the credits were up.
Sorry to offend.
Edit: I linked to this one as the OP indicated he wanted the original Rogers radio/spl.
ive done this because i made a mistake before
flash the 2010 spl and the sapphire recovery and all will be well
alan090 said:
ive done this because i made a mistake before
flash the 2010 spl and the sapphire recovery and all will be well
Click to expand...
Click to collapse
Thanks, I'm all fixed up now.