Related
Hi,
Rogers released new dream rom with a radio update.
We have 62.50S.20.17H_2.22.19.26I now
This new is:
62.52S.20.18U_3.22.20.17.
Anyone able to get it out so we can flash it on cyan latest mod rom?
Dont know exact radio version but go here for rom:
http://www.htc.com/ca/SupportDownload.aspx?p_id=269&cat=2&dl_id=654
Thanks again.
the whole dump is an nbh file that has to be flashed from the sd. Anybody know how to crack it open?
I bet it contains other fixes as well! The message on Twitter said that they fixed some bugs!
jubeh said:
the whole dump is an nbh file that has to be flashed from the sd. Anybody know how to crack it open?
Click to expand...
Click to collapse
I remember back when I had my Wizard, there was a tool to pick apart nbh images and reassemble them. But this was for Windows Mobile, a completely different platform. Perhaps the basic file formats are similar?
Use qmat. It can unpack nbhs.
Mmmm, new radio.......yummy.....I like new stuff.....wait if it is a new radio, will this be able to work for us, how to we know that this won't jeprodize us with the danger spl. I know I ain't gonna be the first to try this
gridlock32404 said:
Mmmm, new radio.......yummy.....I like new stuff.....wait if it is a new radio, will this be able to work for us, how to we know that this won't jeprodize us with the danger spl. I know I ain't gonna be the first to try this
Click to expand...
Click to collapse
my thoughts exactly...took enough balls to go for the danger SPL in the first place.
my current radio works fine, so I am not going to mess.
then again...never say never. thats what XDA is all about
Well we know the radio calls the spl and that the old radio was not able to call the hayruko spl which cause way too many paperweights so how will we know if this radio will also call it, we can assume that since it is an update would but the word assume means to make an ass out of you and me, so is there any way that this can be checked or tested numerous times before we possibly get another wave of bricks and without a cupcake over the air excuse to fall back on. Just my thoughts.
Never change a running system my father tells. Me all the time.. ;-)
Yeah but I like new stuff, I got so used to it feeling like christmas around with new stuff all the time that I got spoiled. I have had this radio and spl for 3 months now and I am bored off it. I demand something new that could cause some new widespread havoc, can't we get something that causes a self destruct if installed incorrectly, kinda jealous of those iphone 3gs users and their exploding batteries, I want something that explodes and catches fire. I demand a refund what am I paying you dev for, wait I don't pay you, nevermind forget this whole post
P.s. I am just playing
rogers is DREA210
we have mostly DREA100/110
i dont think we r able to flash it...
Hardware is identical.
So it should work OK.
Just give me radio Rom only and i will flash it asap.
drea110 here.
You can go back to default by flashing DREAIMG.nbh and then re-flash with this Rom and all will be OK.BUT YOU WILL LOOSE ROOT!
And that is why i didn't flash it yet
Am waiting for someone to give a proper radio Rom to flash.
There will always be a question about whether any new radio image (IPL) that ships will be compatible with a hacked SPL or other SPL not intended for the specific device. This new IPL could very well brick every device it is installed on when mixed with the deathSPL. I very strongly suggest that nobody tries this IPL unless they switch back to their STOCK SPL. Now that HTC has so kindly provided the kernel source needed to build custom kernels that will boot on a stock dream as provided to rogers, there is absolutely NO NEED to continue using the deathSPL phone killer.
Hey, does this nbh file carry the SPL? (it must, doesn't it?)
If it does, then you could maybe just install this and reroot.
Yes it contains spl and radio rom and os rom on it so it will put back everything on stock.
But you will loose root and as of now there is no way to root on 1.5 version.. yet.
if there is i would flash it.
Re-root leave radio and check spl version.
if newer than deathspl would leave it and flash cyanogen 4.0.4.
If not reflash haykuro new hacked spl back and then wipe and flash cyanogen 4.0.4.
And am back in bussiness with new radio and/or spl.
But rooting on 1.5 cupcake needed to do that so...
demetris_I said:
Yes it contains spl and radio rom and os rom on it so it will put back everything on stock.
But you will loose root and as of now there is no way to root on 1.5 version.. yet.
if there is i would flash it.
Re-root leave radio and check spl version.
if newer than deathspl would leave it and flash cyanogen 4.0.4.
If not reflash haykuro new hacked spl back and then wipe and flash cyanogen 4.0.4.
And am back in bussiness with new radio and/or spl.
But rooting on 1.5 cupcake needed to do that so...
Click to expand...
Click to collapse
Really REALLY WRONG!
As I rank your knowledge about SPLs,Radios and android itself with this post, you shouldn't flash this, except if you wouldn't cry and open up a thread "My G1 is dead" ;-)
maxisma said:
Really REALLY WRONG!
As I rank your knowledge about SPLs,Radios and android itself with this post, you shouldn't flash this, except if you wouldn't cry and open up a thread "My G1 is dead" ;-)
Click to expand...
Click to collapse
And you base that on what?
1.5 is rootable - look for "goldcard"
Second: This update has a different SPL - It's not an Engineering SPL.
It replaces your recovery.
And I think these Recovery and ROM wouldn't boot on a regular T-Mobile G1, because it has a different radio chip.
It's very risky to flash this, because it's from a different phone.
It's NOT the same hardware!
maxisma said:
1.5 is rootable - look for "goldcard"
Click to expand...
Click to collapse
I hope this is not a very stupid question, but why would you need a goldcard. Can't you just revert to RC29 and root you device the old and easy way?
maxisma said:
1.5 is rootable - look for "goldcard"
Second: This update has a different SPL - It's not an Engineering SPL.
It replaces your recovery.
And I think these Recovery and ROM wouldn't boot on a regular T-Mobile G1, because it has a different radio chip.
It's very risky to flash this, because it's from a different phone.
It's NOT the same hardware!
Click to expand...
Click to collapse
Of course i didn't expect it to be engineering spl, this rom are made of normal ppl to use not experiment so normal spl would be on it but maybe the same as g1 or newer.
rogers only modification was on UMTS 850 / 1900 bands the normal g1 only supports UMTS 1700 / 2100 but rogers g1 users did flash radio rom from g1 vanilla see hardspl or even haykuro's hacked spl and they work fine so why not the contrary?
After all they keep the same base versions:
We have 62.50S.20.17H_2.22.19.26I
They have 62.52S.20.18U_3.22.20.17.
If they had: 3.0008 i wouldn't bother smells from miles is not same radio hardware
But as you can see the code is identical to each other, only newer!
The hardware IS the same my friend only they dont have dvt only pvt motherboards and they all be flashed with latest haykuro's spl and radio!
If am wrong the os will load but i wont have cell reception but that is as far as it goes for a brick.
Am 99% this rom will do just fine on any pvt g1 phone out there.
As for goldcard, didnt know there is a way to root on 1.5 please enlighten me.
Is there anything to download to make this happen? ->link
if it is am more than 101% that this rom will go on my phone sweet.
After that i dont know what happens will i be able to flash haykuro spl back or i will have a brick? will it let me flash custom rom?
Over and out.
Hi everyone,
Been trying to root my phone since yesterday and had a bit of trouble. Now it seems that the SPL I have is a perfected one as I am unable to use fastboot for recovery.img (not allow error).
This is what I have:
Sapphire PVT 32A Ship S-ON H
1.76.0010 (SAPP50000)
CPLD 12
Radio 6.35.10.18
Is there a way to change this SPL at this time? I know there are ways for older ones but I wasn't sure that I should be changing to an older SPL (and risk bricking my phone) so I thought I'd ask first!
Any advice/input greatly appreciated.
furie said:
Hi everyone,
Been trying to root my phone since yesterday and had a bit of trouble. Now it seems that the SPL I have is a perfected one as I am unable to use fastboot for recovery.img (not allow error).
This is what I have:
Sapphire PVT 32A Ship S-ON H
1.76.0010 (SAPP50000)
CPLD 12
Radio 6.35.10.18
Is there a way to change this SPL at this time? I know there are ways for older ones but I wasn't sure that I should be changing to an older SPL (and risk bricking my phone) so I thought I'd ask first!
Any advice/input greatly appreciated.
Click to expand...
Click to collapse
Yeah that's a perfected SPL. I assume Recovery Flasher doesnt work? If you can't use Recovery Flasher then you are out of luck until someone can break into those phones.
Keep in mind the hero recovery is the only one that works with the 6.x Radio.
Arrrgh!!! I'm tempted to go to the Rogers store and exchange my Magic for another one (without the upgrade on it). I still have 8 days to do so according to Rogers policy...
chances are you'd get another with perfected spl.
This is how i got mine working from perfected spl->custom rom
If you want a different rom, dont follow the last 2 links, and find whatever you want to flash, after the first 2 links you will have a non-perfected spl and be able to flash whatever your heart desires.
There are easier ways to do this if you are not running windows 7. Apparently theres a way using htc sync, but i cant get it working, even with all of the fixes that people have claimed work for them
PurpleFries said:
u can have a sense ui running on 1.5, if you are only concerned with how it looks. Just flash the cursorsence rom, if u have 32a phone. ensure u dont have a perfect spl. If you did the rogers dream->magic switch, likely you have a 32a phone with 1.33.0010 perfect spl. you must get rid of this first.
here's some links to help you out as i did this process yesterday. took me a helluva long time.
Goldcard Method
Fix perfected spl using this goldcard
MAKE SURE YOU HAVE THE RIGHT RADIO AND SPL!!!!!.
Radio and spl upgrade
Cursorsence
Click to expand...
Click to collapse
For the video in that link, watch up until the point where he tests the goldcard by putting it back into his computer to see if it opens. You don't need to follow his instructions past there
PurpleFries said:
chances are you'd get another with perfected spl.
This is how i got mine working from perfected spl->custom rom
If you want a different rom, dont follow the last 2 links, and find whatever you want to flash, after the first 2 links you will have a non-perfected spl and be able to flash whatever your heart desires.
There are easier ways to do this if you are not running windows 7. Apparently theres a way using htc sync, but i cant get it working, even with all of the fixes that people have claimed work for them
For the video in that link, watch up until the point where he tests the goldcard by putting it back into his computer to see if it opens. You don't need to follow his instructions past there
Click to expand...
Click to collapse
Thanks, I'll give that a try. I'm actually using Windows 7 so I'll have to do it that way.
Does it matter that my SPL is 1.76.0010 rather than 1.33.0010?
umm.
Actually im not 100% sure. Kuz i know messing with the radio and spls can be problematic if you flash them incorrectly... I personally would go straight to flashing These instead of going to 1.33.2007
maybe wait for someone more experienced to comment, kuz radio and spl being flashed wrong will result in a brick
PurpleFries said:
umm.
Actually im not 100% sure. Kuz i know messing with the radio and spls can be problematic if you flash them incorrectly... I personally would go straight to flashing These instead of going to 1.33.2007
maybe wait for someone more experienced to comment, kuz radio and spl being flashed wrong will result in a brick
Click to expand...
Click to collapse
Its 1.76.2007 not 1.33.2007. For now u need some practice at stage 1 - keep your original radio & spl. Otherwise like u said yourself, BRICK!
Got the HTC Magic upgrade through Rogers...
Perfected SPL
Since they still use 1.5 (yet they claim they care about security, lol) RecFlash works a charm.
Install RecFlash, slash RA's Recovery, then use it to flash the ROM.
w00t!
furie said:
Hi everyone,
Been trying to root my phone since yesterday and had a bit of trouble. Now it seems that the SPL I have is a perfected one as I am unable to use fastboot for recovery.img (not allow error).
This is what I have:
Sapphire PVT 32A Ship S-ON H
1.76.0010 (SAPP50000)
CPLD 12
Radio 6.35.10.18
Is there a way to change this SPL at this time? I know there are ways for older ones but I wasn't sure that I should be changing to an older SPL (and risk bricking my phone) so I thought I'd ask first!
Any advice/input greatly appreciated.
Click to expand...
Click to collapse
I have the same config as you are. I used procedure from theunlocr.com. "HTC Magic one click". Now Im on 2.1
The one on my sig is my Dream the one I rooted to 2.1 is the Magic (free HU)
asiano said:
I have the same config as you are. I used procedure from theunlocr.com. "HTC Magic one click". Now Im on 2.1
The one on my sig is my Dream the one I rooted to 2.1 is the Magic (free HU)
Click to expand...
Click to collapse
you sure I try and it doesn't allow me to backup or to upgrade...
I'm on the new rogers spl... the 1.76.0010.
can you give alittle more detail how you have rooted?
Thank you
fatcow167 said:
you sure I try and it doesn't allow me to backup or to upgrade...
I'm on the new rogers spl... the 1.76.0010.
can you give alittle more detail how you have rooted?
Thank you
Click to expand...
Click to collapse
Yes please share, I'd like to go to 1.6 or 2.1 too!
fatcow167 said:
you sure I try and it doesn't allow me to backup or to upgrade...
I'm on the new rogers spl... the 1.76.0010.
can you give alittle more detail how you have rooted?
Thank you
Click to expand...
Click to collapse
me and asiano both did the same thing, just follow this here procedure:
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
I've tried that method with the new rogers update (SPL 1.76.0010), and it doesn't seem to work for me. The flashrec website even states it doesn't work with firmware released after November '09. Are you sure you had the new update when you rooted using this method?
XC3N said:
me and asiano both did the same thing, just follow this here procedure:
http://theunlockr.com/2009/08/29/how-to-root-the-htc-magic-in-one-click/
Click to expand...
Click to collapse
yes but i think you don't have a perfected spl, we are not able to root because our spl version is 1.76.0010... can you confirm you got the same?
I have an updated Rogers ROM and Goldcard will not work with the current ENG SPL. Outdated
Same with me. Stuck on this ROM. I think whomever says they were able to get root with 1 click method or flashing the Engineering SPL did not have the same setup as those of us who are stuck. I've devoted about 20 hours so far to getting root again. None of the methods are working, and yes I'm following the directions to the letter. This is really starting to piss me off.
Is there anyone working on trying to root this new Rogers update ROM? It seems like most of the people who do this stuff have moved on to the Droid and N1. Do we need to start a fund to entice one of the people who rooted the other ROMs to come back and revisit Rogers 1.5 Sense? I'd throw $10 US into the pot.
Any other ideas?
im in!
10$ US, im in!
I'm in for $10
God I hate Canadian cell providers.
Can the phone still be unlocked to use on a different carrier though??
10$
Totally in. 10 bucks is a small price to pay for a rooted phone.
***MOD EDIT***
PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION : http://forum.xda-developers.com/showthread.php?t=655097
***O.P. EDIT***
The link above does contain some more detailed information but the guide below has yet to cause a brick.
IF YOU PLAN TO FLASH THIS SPL PLEASE READ THIS WHOLE POST
This is for the Dream/G1 ONLY. If you have a Sapphire/MT3G this SPL is not needed.
If you have no idea what a SPL is or you are looking for info on other SPLs please read this page http://code.google.com/p/android-roms/wiki/SPL
Let me start off by saying that I have nothing to do with the actual development of the SPL. I also take no responsibility if you do decide to flash this SPL and brick your phone. That being said I decided to create a "How To" for the SPL for the simple fact that I would have switched to it long ago if I knew how easy and safe it was.
The SPL that you need for many of the new Eclair ROMs along with Hero ROMs and some Donut ROMs like Super D is a special SPL created by Haykuro that basically gives you more space to flash larger ROMs. When Haykuro first released the SPL there were reports of people bricking their phones. It turned out that the reason for the SPL causing a brick was because the SPL needed to be flashed over the latest radio and requires a PVT board. If the SPL is flashed over a radio version prior to "2.22.19.26I" or on a DVT board it will cause a brick. After people heard about this SPL causing bricks it became known as the Danger or Death SPL because of the danger that it can cause death to a G1.
A lot of people including my self were very worried about flashing the SPL in fear of a bricked phone. The result being many people not wanting to flash certain ROMs because they do not want to brick their phone. Some devs have actually changed their ROMs just to make them small enough to flash with out the Danger SPL so that more people will use their ROM.
Well if you are reading this and you don't have the Danger SPL because of the fear of a brick well then don't worry its ok to be scared but this "How To" will get you through it safe and sound.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
A simple way to make sure that the SPL flashed correctly is when you reboot to the boot loader screen by holding the camera button you will see HBOOT-1.33.2005. You can also see that it flashed correctly by checking your system size it will now be 89mb a very easy was to check this is with the My Account app available in the Market.
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
kathi17 said:
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
Click to expand...
Click to collapse
PVT = a must have.
Also forgot to mention that when you reboot after flashing the SPL, you have to reboot with Home+Back
kathi17 said:
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
Click to expand...
Click to collapse
Yeah thats a big reason I decided to post this, so many ROMs now say they require Death/Danger SPL and only a couple actually provide a link or some type of simple instructions. I figure with a dedicated "How To" we can eliminate questions about the SPL in ROM threads and make people feel a little more comfortable with flashing it. I dont believe anyone actually tested it without a PVT board. I havent even seen anyone one here that doesnt have PVT board. Just in case though I will edit the OP, thanks for remembering that because I completely forgot that it has only been tested on a PVT board as far as I know.
also you should include how to know which spl you have. i was about to flash the danger spl again because i forgot i already had it
xsnipuhx said:
PVT = a must have.
Also forgot to mention that when you reboot after flashing the SPL, you have to reboot with Home+Back
Click to expand...
Click to collapse
I rebooted with the reboot option in the recovery with out an issue.
Joe333x said:
I dont believe anyone actually tested it without a PVT board. I havent even seen anyone one here that doesnt have PVT board. Just in case though I will edit the OP, thanks for remembering that because I completely forgot that it has only been tested on a PVT board as far as I know.
Click to expand...
Click to collapse
If I remember right, some people flashed the radio first, and still bricked, and the difference was that they didn't have a PVT board.
Maybe you should also put in big red letters at the beginning about flashing the radio first. You can tell by reading all the questions on here that at least half of the people don't read the instructions, they just flash away in any order they feel like flashing!
kathi17 said:
If I remember right, some people flashed the radio first, and still bricked, and the difference was that they didn't have a PVT board.
Maybe you should also put in big red letters at the beginning about flashing the radio first. You can tell by reading all the questions on here that at least half of the people don't read the instructions, they just flash away in any order they feel like flashing!
Click to expand...
Click to collapse
Very true red letter warning has been added.
Please if anyone has suggestions for this "How To". Dont hesitate to post. I made this to help people out so if you have an idea that will help let me know.
When I first got a G1 as a test phone I tried to flash the radio/spl and it failed repeatedly. I'll try it again as I have had the phone for awhile and I want to try some of the newer ROMs
EDIT: Still getting fails on the radio flash.
it says:
Install from sdcard
Finding update package
Opening update package
E: Can't open /sdcard/ota-radio-2_22_19_26I.zip (bad)
Installation aborted
could it be my sd card?
It looks good now!
I remembered right:
Ok if u press the camera button + power to power the phone up and if u see "PVT" then ur good to go if u see "DVT-1 or 2" then u should defenetly not flash cuz almost every1 with dvt gets "bricked".
Click to expand...
Click to collapse
form this thread:
http://forum.xda-developers.com/showthread.php?t=517593&page=9
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
MaDaFGG said:
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
Click to expand...
Click to collapse
The Haykuro/Death SPL IS the Danger SPL.
MaDaFGG said:
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
Click to expand...
Click to collapse
it is called Haykuro SP: .2005 you guys have to get your facts straight.Haykuro is the person that ported the Magic's SPL to the Dream to allow larger roms to be installed.
Both the Radio & SPL are here:
http://code.google.com/p/sapphire-port-dream/
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
kathi17 said:
It looks good now!
I remembered right:
form this thread:
http://forum.xda-developers.com/showthread.php?t=517593&page=9
Click to expand...
Click to collapse
Thank for finding that I just edited it again
I'm snowed in tonight, so I'm gonna try this out. I hope everything I need to know is here. If I do a Nandroid+EXT backup before, will I be able to Nandroid Restore after the SPL upgrade?
So I tried to flash the spl yesterday cuz i wanted to try out some new roms, but I kept on getting errors everytime I flashed the spl and it aborted. So after a while i just gave up and went back to cyanogen. Does anybody know why there would be errors when installing the spl. and yes I did flash the radio first.
rizocreations said:
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
Click to expand...
Click to collapse
That is correct. This SPL actually is the one that if for your mt3g but edited for the G1 so that it can flash larger ROMs.
rizocreations said:
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
Click to expand...
Click to collapse
Its called Sapphire to dream port for a reason.You can use the .2004 or .2010 SPL or whatever its called instead.
If I already have the correct radio, do I have to re-flash the radio again before flashing the SPL?
The reason I am asking is that I have 2 G1's.. the first I unknowingly did everything right and have the danger SPL without any problems. When I went to root the second one a couple of months later, I bricked it even though I thought I did everything right. Now my "new" phone has the correct radio, but only the engineer's SPL and I want to try some of the newer ROMs but am afraid to brick the phone again.
Thanks
Hi,
I thought id flash my 32b with the latest rom today, so i downloaded it off here (said it was for a 32b) and flashed my phone...
1: its not for a 32b its for a 32a
2: its now stuck in RUU USB mode
3: i can communicate to it with fastboot but can not load a recovery file as it just hangs where it should have rebooted into the recovery image,
4: its using 1.76.0009 spl which is a perfect one.
5: PLEASE does anyone know how i might be able to UN-Brick my phone ?
6: I cant make a gold card as i can't get the CID for my SD card
PLEASE HELP
EDIT: There is an update on HTCs UK site. Just download and install that and you should be fine.
thanks for the reply,
Unfortunately im from NZL and my serial number doesnt work
and my phone is a 32b and that update is for a 32a
Used Haret to get CID
I also bricked my Magic yesterday, using an official RUU.exe. And I had the same problem in obtaining the CID, but luckily I could get around it as follows:
I still have an old HTC Touch Cruise (aka Polaris 100) and installed an Android version which booted from Haret. Once it was running I could obtain a terminal window and do a cat for the CID file. I tried to access it via ADB, but that did not succeed.
There are several distributions described in the Polaris forums, your mileage might vary with other models.
So if you know somebody with an HTC phone (WM) try to find an Android distribution for it, put it on your SD card and run haret. It is non-destructive and allows you to read the CID. After obtaining the CID, I reformatted the SD card and folowed the instructions here: Create gold card.
After inserting the Gold card, I could continue the RUU update and now I have a Magic with HTC Sense.
thanks for that, im glad to see im not alone, im trying to find a program for linux / mac / windows which will give me my CID for my SD card but can't find one anywhere
When you put the goldcard in and turned your phone on it boot from it automatically ?
gymmy said:
thanks for that, im glad to see im not alone, im trying to find a program for linux / mac / windows which will give me my CID for my SD card but can't find one anywhere
When you put the goldcard in and turned your phone on it boot from it automatically ?
Click to expand...
Click to collapse
If u have a nokia hacked can use the ReadCID aplications.
thanks i have found a friend with a touch HD on android so i am going to get that tomorrow and make up a gold card ,... Ill report back with the results.
Thanks to everyone for your help todate
gymmy said:
thanks i have found a friend with a touch HD on android so i am going to get that tomorrow and make up a gold card ,... Ill report back with the results.
Thanks to everyone for your help todate
Click to expand...
Click to collapse
hello, I had the same problem with the help of my colleagues from the Bulgarian, I fixed it without gold for cadets karta.Chek you just made the phone had such a site where you are setting up your serial number and go to where it e.sled enter the site and the HTC looking for old phone si.Download to update it if you go with the serial number if you do not poke around the net, Russians are brothers powwow original RUU, most important is to find for your original RUU telefon.Shtom find it, you put the USB cable and it puskash.This of me I hope I helped you
Wait... how did you manage to install a RUU for 32A on a 32B without goldcard?
sindrefyrn said:
Wait... how did you manage to install a RUU for 32A on a 32B without goldcard?
Click to expand...
Click to collapse
my platform is 32A end I dont creat cold card just a original RUU from HTC sait
my phone is TIM brandet and i download TIM RUU and my phone downupgade then
Just an update to how the recovery is going
Well i created a goldcard which has fixed my issue with the Custom ID check and i have managed to Down grade my hboot to 1.76.0008 and my radio phone is still having a personalliy issue and thinks its a 32a and its NOT !! when it gets to unzipping the system it just hangs there, in fact it sits there all day until the battery dies and indicator doesnt shift on phone from 0 so with the RUU it makes it to 81% if i can get a sappimg for a 32b which desent flash the system but only the radio and hboot would be great (I think) , issue is that when i try and make one, it comes up with Signature Verfiy Fail
HELP
Not even 32A users can downgrade 1.76.0008 right now except for the SU edition, which you cannot boot. You have a brick.
The same problem
http://www.youtube.com/watch?v=PlH_yhgRiwo
I have found a way around that im now working again, its all about the order that things get flashed to your phone.
I found an RUU that flashed everything 1st apart from the rom which is flashed last. As long as you have a gold card you can do this.
When it gets to flashing the system over its crashes... thats ok, take the battery out of your phone and reflash, your 32a s-on H becomes a 32b s-on H and then the system will flash over ok.
So... I have a skitzo phone at the moment with a saudi rom on it, but at least its working... HOW EVER.... these bloody alarms keep waking me up to do my prays hahahaa i thought that was kinda funny...
SO... now i just need to copy a sappimg onto my gold card and flash off that which ill do tonight
Ill give a full detailed HOWTO with links to the files once im back to normal.
Its taken me about 3 full days and about 3gig of downloads to get this sorted. If you dont have a gold card then your SCREWED... well not totally you need to get another phone eg android or a windows mobile 6.5 with eaRET on it works also
gymmy said:
I have found a way around that im now working again, its all about the order that things get flashed to your phone.
I found an RUU that flashed everything 1st apart from the rom which is flashed last. As long as you have a gold card you can do this.
Here's why I thought you had a definite brick:
When it gets to flashing the system over its crashes... that's ok, take the battery out of your phone and reflash, your 32a s-on H becomes a 32b s-on H and then the system will flash over ok.
So... I have a skitzo phone at the moment with a saudi rom on it, but at least its working... HOW EVER.... these bloody alarms keep waking me up to do my prays hahahaa i thought that was kinda funny...
SO... now i just need to copy a sappimg onto my gold card and flash off that which ill do tonight
Ill give a full detailed HOWTO with links to the files once im back to normal.
Its taken me about 3 full days and about 3gig of downloads to get this sorted. If you dont have a gold card then your SCREWED... well not totally you need to get another phone eg android or a windows mobile 6.5 with eaRET on it works also
Click to expand...
Click to collapse
Now I am very curious. Where did you get this RUU? I still don't see how you fixed it. I'm looking forward to seeing you detail this.
The new RUUs come in 2 zip files - the first with the radio and hboot and the other with the rest of the files. You can rename them as sappimg.zip to try to flash them from RUU, since they are signed by HTC.
However, as far as I know those RUUs are for 32A only. If you had HBOOT 1.76.0008, 0009 or 0010, you can not flash a lower version ROM even with a gold card. The SPL/HBOOT and radio combination actually seems to work on the 32B. However, you would need to be able to boot to a custom recovery somehow to do anything special. The system.img on the 32A RUUs I thought were too big for 32B. So if you were able to flash you must have had enough space on the 32B and I was wrong. I wonder why people are getting stuck though.
The reason I called a brick is because the only available 32B HBOOT have lower ROM version strings (2.x series ROM) than the 32A RUUs (3.x series ROM version string). I still don't know if 32A RUUs actually work on 32B.
You can flash the 3.05 series SPLs all you want, but they are all perfected. The only other option for the 32A Magic was booting to the leaked 3.04 ROM with SU in the system image, but you would not be able to flash that. So are you saying that it actually works?
Anyways please report back
xaueious said:
Now I am very curious. Where did you get this RUU? I still don't see how you fixed it. I'm looking forward to seeing you detail this.
The new RUUs come in 2 zip files - the first with the radio and hboot and the other with the rest of the files. You can rename them as sappimg.zip to try to flash them from RUU, since they are signed by HTC.
However, as far as I know those RUUs are for 32A only. If you had HBOOT 1.76.0008, 0009 or 0010, you can not flash a lower version ROM even with a gold card. The SPL/HBOOT and radio combination actually seems to work on the 32B. However, you would need to be able to boot to a custom recovery somehow to do anything special. The system.img on the 32A RUUs I thought were too big for 32B. So if you were able to flash you must have had enough space on the 32B and I was wrong. I wonder why people are getting stuck though.
The reason I called a brick is because the only available 32B HBOOT have lower ROM version strings (2.x series ROM) than the 32A RUUs (3.x series ROM version string). I still don't know if 32A RUUs actually work on 32B.
You can flash the 3.05 series SPLs all you want, but they are all perfected. The only other option for the 32A Magic was booting to the leaked 3.04 ROM with SU in the system image, but you would not be able to flash that. So are you saying that it actually works?
Anyways please report back
Click to expand...
Click to collapse
No they dont work and hence why it bricked the phone, the good part is that it never flashed the rom so I was sweet with getting the phone back. Prior to flashing it was 32b 1.33.0010 eng s-off G, then 32a 1.33.0009 s-on H and now is a 32b 1.33.0010 s-on H... rom is 2.56.??.? which ill have to look up later when im back home either way its gone from a 32b to a 32a stuck in RUU USB (due to not enough room to flash the rom) back to a 32b which works just is all arabic.
With the GOLD card it allowed me to flash a different Custom ID on to my phone, replaced the Radio and SPL and which then changed the phone from 32a to 32b, I even reversed it and did it again to makesure it wasnt a fluke and it wasnt. if it wasnt for the fact that the order of the flashing occured the way i did i wouldnt have been able to fix it as it would tried and flash the SYSTEM b4 it would flash everything else which would make it hang !
As soon as ive rooted the current rom (which is harder than i expected due to the rom version) ill do a write up on how to fix it as there are a few steps inbetween.
.
Wait so you never flashed 1.76.x did you. You just had 1.33.0009 and you typed it wrong in your first post?
If so we don't need a walk through for that. The one at unlocker.net would have served you perfectly.
what walk through was that, ill re 32a it again and ill let you know that it was.
just an update ,
Yes it was spl 1.76.0009
i have since flashed the phone with 2.56.494.7 and now have to wait until someone gets a rooted version of this rom or releases a later gold card version of sappimg.nbh or sappimg.zip to cut a long story short this is what happened.
1: flashed a Sence-IU for a 32b (but it wasnt it was for a 32a)
2: ended up with 1.76.0009 and the radio which goes along with it.
3: now reads 32a s-on H
4: made a goldcard
5: had to flash with 2.56.494.7
6: first flash of this rom replaced the SPL with 1.33.0010 (perfected)
7: screen now reads 32b s-on H
8: rom failed to flash
9: re-run the update of 2.56.494.7 and the phone flashes and reboots
10: cant root the phone until a newer version of sappimg.nbh is released
11: can use the phone but the arab applications dont allow the market
12: now its a waiting game.
Hope this helps others with bricked phone... If i had to do this again i wouldnt have flashed the 2nd time with 2.56.494.7 but instead a different RUU for the 32B this would have ment i would have been able to root the phone... Live and lean !
.
I have used the guides in this post to fix a friend's 32B Magic, which he had flashed with an RUU for 32A Magic. It works just fine.
Hi all. I've recently rooted my HTC Magic (previously with perfected 1.76.0010 SPL post-911 Rogers update) via the method recently posted. This included using the Euro RUU, installing Amon_RA's recovery and then installing the 1.76.2007 Engineering SPL.
Since then I've tried 5 or so roms including Legend, OpenEclair, Cursorsense, etc. Almost all of them installed, but never got past the HTC Magic starting boot screen, even after giving it ~20min (the one exception is Legend, which has worked both times I've tried it).
I am also able to revert back to the Euro ROM (not rooted) with nandroid.
Details:
Sapphire PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP50000)
RADIO-6.35.10.18 (recently updated to this version try to fix this issue, no luck)
My process so far:
Created goldcard via unlockr
Installed Euro RUU "update" succesfully with no problems
Used ADB to reflash the recovery to latest Amon_RA recovery image
Used the recovery to flash 1.76.2007 zip from this forum
Wiped data/dalvik/ext (though I get an error on the ext wipe, using ADB shows the /sd folder isn't there anyway)
Used recovery to flash the various ROM zips
Should I maybe be using Fastboot to install roms or a different SPL? Am I doing something wrong here? Legend is nice, but I'd like to try others as well.
Thanks for any suggestions you guys can offer!
Were any of those roms specifically for "new radio" (6.xx) ? or did they specify "old radio" (3.xx) And did you make sure the roms were SPECIFICALLY patched or ported for Magic 32A (as opposed to 32B)
Thanks for the response
I ensured they were 32A, but some didn't specify which radio they were for. Is there some sort of reference, since not all them explicitly state which radio to use.
omnikai said:
Thanks for the response
I ensured they were 32A, but some didn't specify which radio they were for. Is there some sort of reference, since not all them explicitly state which radio to use.
Click to expand...
Click to collapse
For example the front page of the forum section, you'll see a small handful that have [6.35] in the title, which means they're intended for that radio version.
Ah, I didn't mentally connect that with the radio version.
Some still don't seem to declare which radio to use, ie OpenEclair hxxp://forum.xda-developers.com/showthread.php?t=624545.
I can ask in each individual ROM threads if it isn't explicitly stated, but I wanted to see if there was an underlying problem first.
Thanks
omnikai said:
Ah, I didn't mentally connect that with the radio version.
Some still don't seem to declare which radio to use, ie OpenEclair hxxp://forum.xda-developers.com/showthread.php?t=624545.
I can ask in each individual ROM threads if it isn't explicitly stated, but I wanted to see if there was an underlying problem first.
Thanks
Click to expand...
Click to collapse
If they don't specify the radio, its usually assumed that it is for the old radio 3.xx/2.xx, just like how traditionally if there was a rom for HTC Magic, its usually assumed it was for 32B. So your best luck since "new radio" isn't as common is to seek out threads specifically for your radio.
Ok, good to know. Thanks for your help!
Are there any risks to downgrading my radio? Any effective difference to the end-user at all?
Are you on Rogers? You'll want to stay with the new radio or risk the silly data cutoffs. Cursorsense should work fine with what you have. 2.1 ROMs are a little more tricky and not suggested unless you have the time to fool with it. Did you boot all the way up with the euro rom the first time?
When flashing are you doing a full wipe? remember that the 1st boot of most roms take a long time after which they are fine.
omnikai said:
Ok, good to know. Thanks for your help!
Are there any risks to downgrading my radio? Any effective difference to the end-user at all?
Click to expand...
Click to collapse
I'd avoid touching the radio at all, most of the bricked devices are due to trying to change the radios. (and as someone said above about Rogers you're on the ideal radio version)