Database Info

Jamin bricked WM6 IPL SPL 1.00

Hi!
Please help ......... SOS
I bricked my friend's Jamin
It booted fine after I put wm6 but now after I rebooted it,it shows the splash screen with imate logo : ipl : 1.00 , spl : 1.00.0000 , gsm: 01.14.20 , os : 10.1.0.811
any ideas ? pleasee help.......

same thing happened to me when it was softreset with a charger connected. Try removing the battery and/or hardreseting it. should do the trick

just try to hardreset..and then flash it with new ROM

for all devs and users of here with a dead wizard and prophet

well im searching how to make a bypass in the ipl and spl has i understand the ipl is the sistem who recongnizes al the phone and the spl is a auxiliary so....
for example my g4 wizard is dead coz i mix a ipl from a g3 1.01 and the spl are 2.26.0001 so when i update with that mistake my wizard my phone turns on as normal and start the os as normal but when i rebbot the device that never wake up so my question is
how can i make a bypass between ipl and spl to make ife again my wizard??
if this could how can i get it on
pd sorry for my english
thx for advance

Bootloader please help

mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me

^^ ...
hahaha....
now .... charging your phone ... and then turn on your PDA , at the bootloader screen (red,blue,green ... ) , connect you phone with PC .... you will see the USB at the bottom of the screen ... then .... install with the original ROM ...
here is the ROM
http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip

i allready did that, and the error 300 keeps coming
what else can i do

ac ... ^^
your phone is G3 .... not G4 ... ^^
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000 is G3
try G3 ....
did you read it before !!!
http://forum.xda-developers.com/showthread.php?t=321839

Help help help

I have a Imate Jamin, Well i never upgraded it so i tried to upgrade to Gullum WM6 touch, I tried to upgrade through this method http://forum.xda-developers.com/showthread.php?t=323013
But i had battery error battery was below 50%, so i upgraded it through Shell tool, i didn't knew its camera button is not working, after flashing complete i couldn't hard reset device so i have to flash to through RUU again, After this IPL and SPL both were 1.XX, OS 2.20.XX. but after it was complete it is stuck on imate splash screen, Then i flashed it with official RUU after which my Ipl, SPL and Rom where back to 1.XX but no results, and then someone here suggested to Flash with PROPHET NVID RUU i also did that now my splash screen is Qtek Ipl 1.00 Spl 2.20.00 Gsm 02.47.21, OS 2.20.7.34 but still it is stuck on slash screen, in all case USb is been detected and i m able to load bootloader through Holding Power off and Communition Mana Buttons. Please help me and reply what should i do now. I think my Phone is Bricked and dead.
Thank you,
Arvin.

{URGENT HELP} I have installed my Magician with Phrophet.. HELP

i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-

jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (MDA I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 MDA I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
Hey dude..bit more info might b nice...what error is it saying? connection error? or ROM error? or what?.. and if it's connection, what OS u running? you need special drivers for the Magician if you're running Vista..

Try unplugging you battery then plug it back - press power button - it will work but just until you press reset. And no more upgrades

jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
hey dude this dopod logo is really an irritating prob u knw wat jus do a hard reset once n den try coz dopod logo take long long time to go n enter the boot loader mode..
so jus giv it a try i hope it works for u ..
Regards Chigz..