Database Info

Cant establish connection with Activesync

this is my 3rd PPC and i am completely desperate about his problem which i never had before. i can not connect my JAMin trough USB or Bluetooth or Infrared, my activesync turns green but after 2 minutes trying to connect it says that can not get connected, also i have tried on my laptop and i get something else when i cradle with infrared or USB my windows crashed while sync. i have no Idea thought it is because of my Antivirus and AntiHackers i have installed on both computers but i get the same error even if i disable them, I have tried activesyc 4.1 and also 4.2 but same result again,
Any Idea????
--

Do you set IP-Protocol for the Network connection with the Windows mobile device in network connections?

activesync
sent you a PM hope this helps

Thanx s2tephen,
i have Uninstalled my Antihacker firewall and it did worked perfectly,

just close any firewall
and try again
it did work with me

Hi guys,
Hope you can help me with this one
I can't ActiveSync with my PC & Laptop. The computer re-starts everytime I connect my JamIn.
I used USB cable & bluetooth to Sync, I got same issue of re-starting with both.
Please help
Thanks

activesync and wm6

I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!

I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?

Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !

Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....

DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.

when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard

japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....

active sync

flashed new dutty rom on my tilt now for some reason i cant connect with activesync... when i plug in usb from pc phone charges but otherwise pc ignores it im using activesync 4.5

Have you tried rebooting your computeR?

yeah also tried soft reset on tilt

do u have any other system you can check with...maybe there is another app on your computer blocking it from syncing...the best way to tell if its the comptuer or the device is if u have another system running Activesync u can test on

tried on more then one pc....think its a windows mobile 2006 problem because mda and wing work fine

just try to reflash the rom...

UnCheck the USB to Pc enhance connection

cant reflash no usb connection to pc.... unchecked already still no difference ill uncheck and try a soft reset afterwards

flash from SDcard...

Hard reset may solve.. Try it..
Regards,
Carty..

Try using a different USB port.

ive tried soft rest hard reset 8 different usb ports 3 pc's no luck yet any other ideas

daunte24 said:
ive tried soft rest hard reset 8 different usb ports 3 pc's no luck yet any other ideas
Click to expand...
Click to collapse
Did you find a fix?

Did you enable all comunication types (beam?) after i flashed Duttys rom i can't copy a file with usb and also send a file with bluetooth dosen't work. After enabling Beam in Comm Manager it works...
i hope this helps...
BR Pepe

Pepe72 said:
Did you enable all comunication types (beam?) after i flashed Duttys rom i can't copy a file with usb and also send a file with bluetooth dosen't work. After enabling Beam in Comm Manager it works...
i hope this helps...
BR Pepe
Click to expand...
Click to collapse
Thanks for the reply Pepe, all are enabled but still no luck.
It's strange, never had a problem till now.

Change the cable
Have you tried using a different USB sync cable? I've heard of that solving this type of problem. Having said that, if it is anything to do with your USB connection, the phone would sync via Bluetooth.

andrew-in-woking said:
Have you tried using a different USB sync cable? I've heard of that solving this type of problem. Having said that, if it is anything to do with your USB connection, the phone would sync via Bluetooth.
Click to expand...
Click to collapse
Hi Andrew, Yes I have, I have even tried it on three different PC's.
But the plot thickens, I now realise that I can't delete or copy files to either the PDA or the MC, I get the message "Access is Denied" so it looks like my problem might be something else?

Did you try turning off "advanced network functionality"?
I have a problem connecting via ActiveSync when advanced networking is enabled, so I turn it off every time I flash.
Settings... USB to PC... uncheck "Enable advanced network functionality"

Strange problem with USB connectivity

I have a strange problem with a HTC Touch PRO. Here is my problem:
- I insert the USB cable and the phone asks if I want to use mass storage or activesync
-the phone shows a connection on the screen
-The PC is not sensing anything, the activesync is not connected.
I think this problem appeared after I used a wrong usb cable...
Anyone knows anything what to try? or this is a hardware problem?

Did you select ACTIVESYNC?
There are 2 modes this phone can do..
1) Standard ActiveSYNC or
2) AS a MASS STORAGE DEVICE -like a flash drive...
You have to select ActiveSYNC to actually SYNC software/calendar, else it will show up as just another drive to drag/drop files..

Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?

laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
The problem is likely with your operating system on your pc.
You can try things like, un-installing the HTC usb driver in device manager.

Check your firewall.
- allow activesync for trusted
- I know for ZoneAlarm you have to go to the adapters section and set the ipaddress (a new one is created when your phone is hooked up via USB) to be trusted.
If that doesn't fix issue perhaps its a corrupt install of ActiveSync. Try uninstalling and reinstalling.

laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
I've had this happen to me. I've got so many USB to mini-USB cables and they are not all alike.
Sometimes, it would work and sometimes activesync would not recognize it.
CHANGE YOUR CABLE to another. Hopefully, you've labeled the original cable that came with the phone..
(also, look at the mini cable where it plugs into your phone. Make sure there are no loose pins and/or verify that the 'plug' is level.

Try a different USB port

Try unchecking "use advanced network configuration" in Async settings on the phone. Some computers (for various reasons) have a hard time communicating with the phone when it's configured as a network device - unchecking this will often allow Async to find and connect to the phone, at the expense of some other functionality.

coincendentally i am having the same exact issue, it started last night.
i have tried 3 different cords, on all 3 usb ports on my computer. same thing the phone asks what kind of connection i want whether i select disk drive ofr active sync noting happens. whats weird is that the phone is charging when its connected however the computer is not seeing it at all.
i have tried all the recommendations in this thread but nothing is working. anymore help would be greatly apprciated!

Me too I have tryed everything but none is working.
I think that this a hardware problem, and the problem started to happen after i used a non HTC cable, bad quality. I think some kind of controller is dead. So i started to live with that

When I connteced to the PC via USB, my TP also asked me how to connect (AS or as disc). But suddenly it doesn't ask anymore. I had to deactivate "advanced network configuration" to conntect to AS.
The checkbox "ask each time USB connects" is activated.
What can I do that the phone asks again when I connect it?
Thx.

I have the same thing going on... suddenly a few days ago my fuze only charges when I plug it in the desktop with a usb cable... I re-flashed and it worked about halfway through a sync and then started again... I've tried different cables... uninstalled all of the usb drivers, and reinstalled then updated them... Disconnected the power supply... tried every setting on my phone, and in windows.... I've even uninstalled the last batch of windows updates that came out last week... nothing seems to work...

really simple solution.
decheck advanced network config. plug in cable wait till you see usb connected. a small box. after that choose for example activesync

internet share
This happened to me last night and I figured out that after you toggle your internet sharing you can sync up again. Idk why it works out like that but it worked for me.

This sound reasonable, because the last thing I did before was selecting the "internet sharing" option in the menu when you connect to USB.
But what do you mean with "toggle your internet sharing"? Can you please describe it.
Thx.

try this
okay - first see if you're getting an active connection with your pc , not from the network connections window, but by running mymobiler. I was getting a connection through mymobiler, but active sync wasn't recognizing the device. If mymobiler works, Call your phone. it will drop your connection with mymobiler when you answer the call. then hang up the phone call. (all the while leaving your cable plugged into your phone. When the call has been disconnected your activesync will recognize the connection and sync up again. I don't know why this works, but I've been able to duplicate the results several times.

Same htc ****+ wm. Bought an iphone 3g. Everything must be tuned in windows mobile! It doesn't work how it should!

None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...

Reinstall Mobile Device Manager!
modulusman said:
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Click to expand...
Click to collapse
I've experienced this issue multiple times, as I use my TP to sync with many stations. The solution is way more simple than you think and it has nothing to do with cables!.
You probably use Win Vista so all you need is to uninstall "Windows Mobile Device Center", restart the PC and install a fresh copy from MS site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=83D513EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
If you're on XP, do the same with the Active sync solution for XP.
Good luck!

yeah this happens to me every now and then. the advanced network configuration option really helps, but sometimes i just need to plugin/unplug the usb cable from teh phone/cable or cable/computer a couple more timesbefore it picks it up...
goodluck!

Unable to connect via ActiveSync after playing with QPST/QXDM

Hey everyone, has anyone else had problems connecting via ActiveSync after playing with QPST/QXDM?
In file mode it will mount the MicroSD card fine but in ActiveSync mode it does nothing unless I'm running the DIAG on the phone in which case it mounts the com diag port.
Ideas?
Thanks in advance!

If you were using QPST, then you had to disable the usb connection in Activesync. Re-enable that in and you'll be good to go.

Thanks but it was already re-enabled.
I think the wmodem driver that was installed may be overriding the activesync connection?
I'd rather not have to uninstall/reinstall that driver every time I want to use QPST/QXDM though

hello everyone... i find this is an old thread.. but i'm facing the same problem.. and havent found any solution yet... my phone doesnt connect to "windows mobile device centre" after i did sum gps settings in qpst.... on connecting cable, the phone directly starts showing "internet sharing" screen... also, the phone works fine as a "storage card" when i change the mode in "usb to pc" settings...

can someone help me plz....