Database Info

activesync and wm6

I have just flashed my wizard with a TNT wm6 and now I can't get activesync to regonize my device. I am using activesync 4.5. I uninstalled activesync and relaoded it. I have rebooted both my wizard and my laptop. I have checked the coms and let activesync look for my wizard and it tells me that my device has npot been detected. My wizard is showing the plugged in icon and is taking a charge from my laptop but its not allowing me to share info. is there anything I am missing....?
thanks!

I got the same problem! Cant sync with 2nd PC after upgrade to TNT5.0. I reinstalled Active Sync but it wont work. Now I only can sync with the PC which used to flash ROM. Is there any bar in OS that just allow sync to 1 computer?

Nopes !!!
There's no bar of any sort in any OS as not establish connectivity through Activesync.Which Windows are you using,Active Sync will only work on WinXP and not on WinVista.
1.Disable any Firewall or Anti virus program,check connectivity now.
2.disconnect phone from usb cable,delete partneship from pc and phone.
3.Uninstall Activesync,reboot pc.
4.Get phone into bootloaders mode (multicolor screen),Hook up the phone with pc via usb cable,check if usb appears at the bottom of the bootloaders in the phone,if it's there than,it's establishing connection with phone,if not then,there's a problem either in anyone one of these :-
a) USB cable , b) mini usb port of the phone c) Usb port of the PC.
Dig out the problem and rectify accordingly
Cheers !

Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....

DiCham said:
Yep... All checked!
Before upgrade, normally I've using all 2 PC (and some others PC) to sync with. I upgraded on PC1, is OK. Plug in PC2, it still recornized, connecting but couldnt connected. Batt charging normal. I've deleted all partnership., reinstall ActiveSync, disable Kapersky AV... but still get error. Oh my God, do I have to reinstall Windows??? It's too tired and take long time....
Click to expand...
Click to collapse
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.

when it set to advanced networking it should give up a network device
in the network connections folder
rightclick this network device and choose properties and in there
uncheck the kaspersky protocol (not uninstall)
you can also try to uncheck the advanced network setting on the wizard

japsfinest said:
DiCham, have you had any development on this or has anyone else had this problem? I downloaded the same verison from Nov07 and have not been able to connect since.
Click to expand...
Click to collapse
Sadly, I have no development upto now because I have no time to reinstall Windows in 2nd PC! I hope it will help... thinking about USB driver/controller reinstall first, it will take less time than whole WindowsXP...
japsfinest: do follow da_jojo, it worked!
da_jojo: thanks very much! It work but unfortunately, i'm right on reinstalling Windows! hehehe....

Strange problem with USB connectivity

I have a strange problem with a HTC Touch PRO. Here is my problem:
- I insert the USB cable and the phone asks if I want to use mass storage or activesync
-the phone shows a connection on the screen
-The PC is not sensing anything, the activesync is not connected.
I think this problem appeared after I used a wrong usb cable...
Anyone knows anything what to try? or this is a hardware problem?

Did you select ACTIVESYNC?
There are 2 modes this phone can do..
1) Standard ActiveSYNC or
2) AS a MASS STORAGE DEVICE -like a flash drive...
You have to select ActiveSYNC to actually SYNC software/calendar, else it will show up as just another drive to drag/drop files..

Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?

laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
The problem is likely with your operating system on your pc.
You can try things like, un-installing the HTC usb driver in device manager.

Check your firewall.
- allow activesync for trusted
- I know for ZoneAlarm you have to go to the adapters section and set the ipaddress (a new one is created when your phone is hooked up via USB) to be trusted.
If that doesn't fix issue perhaps its a corrupt install of ActiveSync. Try uninstalling and reinstalling.

laseru said:
Yes i did it in every way and the computer is not sensing the connection with the phone.
Anyone know what kinf of hardware is responsible for the connection with the pc?
Click to expand...
Click to collapse
I've had this happen to me. I've got so many USB to mini-USB cables and they are not all alike.
Sometimes, it would work and sometimes activesync would not recognize it.
CHANGE YOUR CABLE to another. Hopefully, you've labeled the original cable that came with the phone..
(also, look at the mini cable where it plugs into your phone. Make sure there are no loose pins and/or verify that the 'plug' is level.

Try a different USB port

Try unchecking "use advanced network configuration" in Async settings on the phone. Some computers (for various reasons) have a hard time communicating with the phone when it's configured as a network device - unchecking this will often allow Async to find and connect to the phone, at the expense of some other functionality.

coincendentally i am having the same exact issue, it started last night.
i have tried 3 different cords, on all 3 usb ports on my computer. same thing the phone asks what kind of connection i want whether i select disk drive ofr active sync noting happens. whats weird is that the phone is charging when its connected however the computer is not seeing it at all.
i have tried all the recommendations in this thread but nothing is working. anymore help would be greatly apprciated!

Me too I have tryed everything but none is working.
I think that this a hardware problem, and the problem started to happen after i used a non HTC cable, bad quality. I think some kind of controller is dead. So i started to live with that

When I connteced to the PC via USB, my TP also asked me how to connect (AS or as disc). But suddenly it doesn't ask anymore. I had to deactivate "advanced network configuration" to conntect to AS.
The checkbox "ask each time USB connects" is activated.
What can I do that the phone asks again when I connect it?
Thx.

I have the same thing going on... suddenly a few days ago my fuze only charges when I plug it in the desktop with a usb cable... I re-flashed and it worked about halfway through a sync and then started again... I've tried different cables... uninstalled all of the usb drivers, and reinstalled then updated them... Disconnected the power supply... tried every setting on my phone, and in windows.... I've even uninstalled the last batch of windows updates that came out last week... nothing seems to work...

really simple solution.
decheck advanced network config. plug in cable wait till you see usb connected. a small box. after that choose for example activesync

internet share
This happened to me last night and I figured out that after you toggle your internet sharing you can sync up again. Idk why it works out like that but it worked for me.

This sound reasonable, because the last thing I did before was selecting the "internet sharing" option in the menu when you connect to USB.
But what do you mean with "toggle your internet sharing"? Can you please describe it.
Thx.

try this
okay - first see if you're getting an active connection with your pc , not from the network connections window, but by running mymobiler. I was getting a connection through mymobiler, but active sync wasn't recognizing the device. If mymobiler works, Call your phone. it will drop your connection with mymobiler when you answer the call. then hang up the phone call. (all the while leaving your cable plugged into your phone. When the call has been disconnected your activesync will recognize the connection and sync up again. I don't know why this works, but I've been able to duplicate the results several times.

Same htc ****+ wm. Bought an iphone 3g. Everything must be tuned in windows mobile! It doesn't work how it should!

None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...

Reinstall Mobile Device Manager!
modulusman said:
None of this seems to be working... I've even flashed new roms and it stops working halfway through the sync... it doesn't even appear as though windows recognizes the device... it makes no noise or pop-up when I connect it...
Still charges though... Don't know what is going on...
Click to expand...
Click to collapse
I've experienced this issue multiple times, as I use my TP to sync with many stations. The solution is way more simple than you think and it has nothing to do with cables!.
You probably use Win Vista so all you need is to uninstall "Windows Mobile Device Center", restart the PC and install a fresh copy from MS site.
http://www.microsoft.com/downloads/details.aspx?FamilyID=83D513EA-9DF9-4920-AF33-3A0E2E4E7BEB&displaylang=en
If you're on XP, do the same with the Active sync solution for XP.
Good luck!

yeah this happens to me every now and then. the advanced network configuration option really helps, but sometimes i just need to plugin/unplug the usb cable from teh phone/cable or cable/computer a couple more timesbefore it picks it up...
goodluck!

Can't connect my pda to my pc??

Hi.
Im having trouble connecting my Solaris to my pc. Im running active sync 4.5 in xp on my pc and WM 6.0 (SWE). I can manage to connect my phone and pc with bluetooth (works pretty decent) but not with cable? This is a big problem since im in deperate need of a new rom. The phone is charging with cable and thats the only thing it does :S
Ive ran activesync troubleshooter with the result "Couldnt find a USB connection"
I did the thing that they suggested here without any result :S
http://www.microsoft.com/windowsmob...hooter/activesync-no-usb.mspx?WT.mc_id=FWLink
Any1 know what the problem might be? If u need more information about my setup, just ask =)
ROM Version 1,28,413,2 sve
Radio 1,58,25,14
Protocoll 25,69,30,05H
/ Johan

have you tried other wire?
I had the same, and just by accident change the wire - and it starts works
hope it help you

Or you could try to reinstall ActiveSync.
But first try with other USB cable.

Try this
start -> settings -> connections -> usb to pc -> the disable advanced network functionality
Hope it helpes
Good luck.

Activesync problem

Hi.
When i connect my touch pro to my laptop my touch pro thinks he is charging. I tried another laptop/cabel/ROM but it doens't matter.
I can't get a connection with my phone.
Any idea's?

Don't you get asked, what to do, when you connect the TP to your laptop?
Maybe it connects as Harddisk? Do you get a removable device in your laptops file explorer after connecting?
Check settings of your TP in connections - USB to PC.

bare242 said:
Don't you get asked, what to do, when you connect the TP to your laptop?
Maybe it connects as Harddisk? Do you get a removable device in your laptops file explorer after connecting?
Check settings of your TP in connections - USB to PC.
Click to expand...
Click to collapse
Hi,
No, i don't get asked and the settings are good.
It's strange, because it is suddenly.

I had this problem last week and it turned out to be the cable I was using....but I guess you already tried that. How many cables you try? Maybe get another one and try it...

TechnoHippie said:
I had this problem last week and it turned out to be the cable I was using....but I guess you already tried that. How many cables you try? Maybe get another one and try it...
Click to expand...
Click to collapse
Well, i tried 3 different cables. The only thing i changed is the cable in my car. last week i was i Italy and by car charger has gone dead. And i buyed another one. that's all..

Anyone?...

hardreset?

Hard-reset, new ROM, new Radio... nothing helps

Reinstall activesync.
Try another laptop/computer.
Otherwise I don't know.

bare242 said:
Reinstall activesync.
Try another laptop/computer.
Otherwise I don't know.
Click to expand...
Click to collapse
Deed.. nothing

Maybe you can find some new ideas here.

my phone sometimes just charges without activesync but that's only when i have wifi on 0.o if i turn wifi off then the phone syncs.

No luck... tried everything.

Well,I have similar issue with AS.
It starts suddenly and now I am unable to connect.
When I have enabled "Faster data synchronization",then the green icon keeps rotating for a while,but ends with an errormessage. When I uncheck it,AS absolutely doesn't see TP,no attempt.
My cable is working,because I am synchronizing also a HTC Hurricane(SDA2) without any problems.
I have also tried another PC,no luck,same symptoms.
Mass Storage and Internet sharing is working also perfectly.
Mainly I tought,that the IP connection is firewalled,but when it doesn't work also on another PC,that was working before,I have no more ideas.

Sprint Touch Pro2 WMDC connection issue

Hello Gurus,
I'm having tough time. I'm unable to connect my htc pro2 w/ WMDC on Windows 7 Ultimate version (32-bit).
I clean installed everything (Windows 7, WMDC multiple times). Tried unchecking USB-PC Connection/'enable faster connection' on phone but of no use.
Please help.

Please help/
Does anyone how to resolve syncing problem? WMDC can not see my device and device manager shows 'unknown device'.

anybody, plz help
I'm not able to connect my pro2 to pc using usb cable. Device driver is not installed corectly.

try using a different USB port, i cant use the front port on my work computer (same things you described, the driver wont install) but it works fine with the rear port, it may not be getting enough power from the front port
also, there is a setting to disable charging from a PC via USB, this might help as well (ive never tried it though)

It did not work.
I tried both things as suggested by you, it did not work. It shows that driver is not installed correctly 'unknown device'.

badshaah said:
I tried both things as suggested by you, it did not work. It shows that driver is not installed correctly 'unknown device'.
Click to expand...
Click to collapse
I resolved the issue by uninstalling the drivers that are marked as suspect. Then connect phone to pc and it will look for the drivers and install them again. It is only a temp fix because it will happen again but MS is working on a hotfix to resolve the issue. Since doing this I have had no issues syncing at all. You can also sync by bluetooth if you have bluetooth installed on your desktop or laptop. Just choose active sync or file explorer if all you are doing is moving files. Hope this helps you

The fix is this:
On your smartphone, in the USB to PC settings, uncheck the setting "Enable faster data syncronization"
Press okay.
Badabing-bada-boom.
ciao

bug666 said:
The fix is this:
On your smartphone, in the USB to PC settings, uncheck the setting "Enable faster data syncronization"
Press okay.
Badabing-bada-boom.
ciao
Click to expand...
Click to collapse
this does not work for me =(

Nothing works
On AMD based desktop (32-bit windows 7), front port/back usb port. results are same.
I tried on XP laptop (XP professional) with ActiveSync, I get error that 'connected usb device exceed the power limit of usb hub port'. I searched the internet for solution, tried couple of them but same error.
Please help.

bug666 said:
The fix is this:
On your smartphone, in the USB to PC settings, uncheck the setting "Enable faster data syncronization"
Press okay.
Badabing-bada-boom.
ciao
Click to expand...
Click to collapse
this actually fixed the same problem for me.. thanks a mill