I've been reading through the forums a bit, and I have flashed a few roms already...(obviously im a noob)...I keep seeing people who say they have SPL: 3.29Hard2. I read through mskip's noob thread for flashing and I used the JumpSPL1.56-KAIS.exe as guided in the thread...
What is the difference between the two?
jbob0124 said:
I've been reading through the forums a bit, and I have flashed a few roms already...(obviously im a noob)...I keep seeing people who say they have SPL: 3.29Hard2. I read through mskip's noob thread for flashing and I used the JumpSPL1.56-KAIS.exe as guided in the thread...
What is the difference between the two?
Click to expand...
Click to collapse
Jump SPL helps you to install HardSPL. HardSPL is what you need to flash ROMs other than stock ROMs.
I went into the bootload to check my SPL and when I did, it says SPL-1.0.OliPof
Should I update/upgrade it? Does it make any difference?
Short answer is that generally speaking 3.29 or above works best w/ WM 6.1 and 3.34 or above works best w/ 6.5 ... but as always YMMV.
Hard-SPL for Kaiser is tough thing to unravel, so here's a splendid resource --> Kaiser Hard-SPL Rollup Thread
BTW, there's two versions of 3.29 and 3.56 -- .Hard by jockyw2001 and .Hard2 by cmonex, and to this day I'm not entirely sure why...
vp3G said:
Short answer is that generally speaking 3.29 or above works best w/ WM 6.1 and 3.34 or above works best w/ 6.5 ... but as always YMMV.
Hard-SPL for Kaiser is tough thing to unravel, so here's a splendid resource --> Kaiser Hard-SPL Rollup Thread
BTW, there's two versions of 3.29 and 3.56 -- .Hard by jockyw2001 and .Hard2 by cmonex, and to this day I'm not entirely sure why...
Click to expand...
Click to collapse
The answer is in that thread (also see cmonex's old sticky)
Question Answered. Please use the mskip - Flashing for n00bs thread for these questions in the future instead of creating a new one.
Thanks
Dave
Related
I already install Duttys Dualtouch v4 RTM on my Tilt, is working good, working slowly sometimes,
The radio version is the 1.27
Do u have to change the radio version? where can i get those new versions?
What do you think should i do?
Thanks
Hello,
Read this thread.
http://forum.xda-developers.com/showthread.php?t=349375
It contains information about problems and improvements of several radios's
I think you should READ
http://forum.xda-developers.com/showthread.php?t=349375
Then ask
I like seeing this, junior's helping junior's. That's something I haven't seen in a while.
Way to go.
Oh my. This is the type of question that could get you killed on this forum. Follow this link to the Kaiser Wiki. I suggest you start by reading the "ROM Flashing FAQ for Newbies". Hopefully you read the flashing instructions and installed HardSPL prior to flashing Dutty's ROM.
OK, after spending over a year using a Cingy 8525, which I really like, I broke down and ordered a AT&T Tilt today and I am really confused. For the Hernes there is really only one Hard SPL to use, OLIPRO by Pof. Now for the Kaiser I find there are two, one by Pof and one by JockyW. I have read the threads for both, and both seem to be pretty much similar, which one to use?
Any suggestions or input will be helpful.
stesul411 said:
OK, after spending over a year using a Cingy 8525, which I really like, I broke down and ordered a AT&T Tilt today and I am really confused. For the Hernes there is really only one Hard SPL to use, OLIPRO by Pof. Now for the Kaiser I find there are two, one by Pof and one by JockyW. I have read the threads for both, and both seem to be pretty much similar, which one to use?
Any suggestions or input will be helpful.
Click to expand...
Click to collapse
I would suggest that you Security Unlock your device first.
kyphur said:
"Security Unlock" my Phone?
Check here on how to do a security unlock: http://forum.xda-developers.com/showthread.php?t=361236
Here are the files that you will need to do the process:
http://www.4shared.com/file/46447471/7ae96b57/Jockyw2001_HardSPL_-_SuperCID.html
Just follow the steps in the supercid. I have included the .txt file that Jockyw2001 included.
Be sure to flash the "SPL-1.1.JockyW" as the process won't work while SPL-3.2x.Hard is installed.
Click to expand...
Click to collapse
Then I would to update to a WM6.1 ROM.
If you are going to use a ROM such as a Diamond ROM or a HTC based ROM then flash the HardSPL 3.28. If you plan on using the newest AT&T ROM build then I would suggest using the 3.29 HardSPL.
See this thread on selecting which one to flash.
http://forum.xda-developers.com/showthread.php?t=396922
You said you have flashed a HardSPL before using your Hermes then you should know the process. If you have any doubt Kyphur has provided some great information in the 2nd post of the thread. It should answer all your questions.
Being that you have a newer Tilt I would also suggest using the JumpSPL 1.93. Since you probably have that SPL right now.
You can verify this by holding down your camera button and putting the sylus in the reset hole.
As far as flashing you can check the post in my signature about things to before and and after you flash a ROM that might help as well.
totally off subject,
Alltheway, congrat's on becoming a mod,
Lupe
Thanks, AllTheWay, I read through the Kaiser wiki and it listed pofs version, then I saw the sticky in the Kaiser ROM Development and it listed JockeyW's and thats why I was so confused, before I posted my question. I downloaded the Hard SPL files you mentioned and the security unlocker to my PC, so now all I have to do is wait till the darn phone gets here (prolly Monday).
Oh, by the way, I like your vintage Raiders avitar (GO STEELERS) LOL.
To overhaulengines, I started modding phones about 3 years ago, right after I got my first Moto Razor (still have one for a backup).
Hi, I am due to pick up my tytn 2 on Saturday so I have spent hours reading through these forums my brain is starting to bleed.
There is so much information in the forums can I just confirm that to flash I am taking the right steps.
The first question I have is 3.2x.Hard SPL an updated version of HTC Kaiser Hard-SPL v1.
My second question is prior to flashing a ROM, I would:-
1- Run a SSPL such as JumpSPL and then flash the HardSPL.
2- Flash a ROM, (I am looking at Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700)
I know the info is here, there is just so much of it.
Thanks for all the good stuff on here.
Marc
gospelflyer said:
Hi, I am due to pick up my tytn 2 on Saturday so I have spent hours reading through these forums my brain is starting to bleed.
There is so much information in the forums can I just confirm that to flash I am taking the right steps.
The first question I have is 3.2x.Hard SPL an updated version of HTC Kaiser Hard-SPL v1.
My second question is prior to flashing a ROM, I would:-
1- Run a SSPL such as JumpSPL and then flash the HardSPL.
2- Flash a ROM, (I am looking at Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700)
I know the info is here, there is just so much of it.
Thanks for all the good stuff on here.
Marc
Click to expand...
Click to collapse
Sounds good so far.
There are many versions of the Hard SPL now, flash the one recommened in the thread for your chosen ROM (dutty doesn't but I'd suggest 3.28 for this ROM).
Start with SSPL to flash the HardSPL, if you get a white screen then start on the Jump SPLs.
Once done, check Hard SPL is your SPL on your bootloaded and flash a ROM.
Easy
If you have a problem with any of the steps, please post in the relevant thread.
Dave
it's odd how many peoples' first ROMs are Dutty's
mbarvian said:
it's odd how many peoples' first ROMs are Dutty's
Click to expand...
Click to collapse
Mine was, back last year.
Dave
DaveShaw said:
Mine was, back last year.
Dave
Click to expand...
Click to collapse
I've been through many-a-Dutty's, but my first ROM on the Kaiser was Austinsync's BIGstorage version of HTC's original ship ROM.
mbarvian said:
it's odd how many peoples' first ROMs are Dutty's
Click to expand...
Click to collapse
That's funny you say that, my first 3-4 flashes were Dutty's ROMs.
To the thread starter....
My first flash was a bit of an adventure, I'm no guru like the peeps here but, I'm no idiot either. I would suggest bookmarking a few threads here to ease your pain. The Kaiser Wiki is a must have, as is AllTheWays' Ultimate Radio Thread.
Also, I would suggest reading through the thread of the ROM your about to flash to. That way you get a "heads up" on what problems you may or may not encounter. Hope this helps.
DaveShaw said:
Mine was, back last year.
Dave
Click to expand...
Click to collapse
Same here, Apr29 cube hybrid. Loved it. Just recently flashed to L26 v9. Seems more responsive, but I miss all the cool things that were in Dutty's. I've tweaked and installed too many things on this flash to want to flash again for a while. My next flash will be (if it ever comes) a honest to goodness 2D/3D driver upgrade which shows vast improvements with all the cool gadgets in Dutty's hybrid rom. (I miss the rotating cube most)
My first flash was NoThrills...would love to see an updated version. I've since gone Dutty, L26 variants, now on ROMeOS 3.1
Hi all, i got installed HardSPL ver 1.x on my Tilt for use HTC and custom ROMs, but i got a question... what do version 3x of HardSPL? i can flash more ROMs? its better perfomarce 3.x than 1.x? i am a little lost in this aspect
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Travito said:
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Click to expand...
Click to collapse
not 3.56? i thought this was the newest and "best"...
I am using 3.56 and all works fine...
Did not noticed any difference between 3.29 and 3.56
3.29 SPL is extracted from the 3.29 Kaiser ROM, which until recently has been the latest official Kaiser ROM. (the 3.34 SPL from the newer 3.34 ROM has not been hacked)
3.56 SPL is extracted from the 3.56 Tilt ROM.
Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread.
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
Not comprehending something in another thread is not an allowable reason to create a new thread!
dani31 said:
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
Click to expand...
Click to collapse
He Sure could have posted in the existing thread to get a clarification. In fact he should.
Thread Closed pursuant to the guidelines set forth in the Kaiser Section Announcement and the Forum Policies.
Hello,
Is there any differences between cmonex's hardspl 3.29 and JockyW's 3.29?
What is the recommended spl for the latest roms from garmin\hyperdragon\PDACornerUltimate? 3.29 or 3.56?
And for the last question, Anyone here on vodafone germany network and can recommend me a good radio for my network?
Thanks alot!!!
yes. cmonex's has some minor code revisions to make it run more smoothly, if i remember correctly. also, most chefs will tell you which SPL to use for their roms. as far as the radio question, you'll just have to see which works best for you in your area. it seems that most people use the 1.71.09.01 or the 1.65.24.36 kaiser radios, regardless of their location. check out the Ultimate Radio Thread sticky.
This is a redundant thread, you can ask what the recommended spl is for each rom in the thread for that rom, and you can ask the questions about the respective Hardspl's in the thread for those spl's. Thread closed.