i have an old magician and i was using it with no issues
i have following rom/radio installed
ROM 2.03.TX WWE
ROM date 07/07/07
Radio ver 1.13
Protocol ver 1337.43
Extrom version _______
few days back my magician suddenly toggled to flight mode while i was sending text messages. i tired to turn off the flight mode but no us. it just turns on blue tooth and then an error appeared."please turn of the flight mode first!" and it goes on.i tried deleting all storage+hard reset but off no use
can some help me out.
thank u in anticipation..
Try another RADIO,for example,downgrade to 1.12?
Sometimes Hardware problem will make this happed but sometimes it is the ROM Error.
thank u.i m about to try
i have tried to down grade the magician
i have downloaded 2 roms with radio 1.12
but when i try to flash it. it says something like
country error 120 please download the correct from the website
i m stocked.i don't know what to do.please help
ma_bp_wwe_11200_120_11200_ship
NL_WWE_11300_131_11200
WWE_11200_152_11200
tried these three of them.same error "country id error".downloading another to try.can some one please guide me.
Find a RUU_NoID version
i was trying to flash my jam with radio 1.120 and what ever rom i had tried (so i could later own flash it with cotulla's roms) it says "country id error"
but when i had tried with radio 1.1210 it continued and flashed. but my phone is still not working. it is turning off the flight mode but there's a cross upon icon and its written "the phone is off" it turns on the blue tooth and kept on displaying "please turn off the flight mode first"
please tell me what to do
thank u very much
the problem is solved
but please tell me can i upgrade with cotulla's rom with radio 1.1210
RADIO worked?
But Cotulla's website is down.
You can download WWE_O3 and remove radio_.nbf(If exists),then run update.exe
Cotulla's ROM can work with 1.121
thnx you i m about to try
Related
I was doing an Update to my i-mate Jam using ma_cdlsku2_arb_10300_141_10100_ship.exe but something in the middle of the upgrade went wrong, the computer rebooted.
When the computer booted up I tried to update again I turned the i-mate (Qtek S100) up it wont boot completly. I get the blue Imate screen and at the bottom right corner I see in red
NO GSM
D 1.03.00 WWE
and it stops there, I tried to run the MaUpgradeUt.exe and I got Error 120 Country ID ERROR, then I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe but nothing I get the same error.
I hard reset it and I get the USB written on the screen. I tried to run an upgrade but ma_cdlsku2_arb_10300_141_10100_ship.exe gives me error 101 connection problem and I tried QtekS100_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe and get the Error 120 Country ID error.
Please help what to do ?
Please help.
by the way, I baught this in Dubai, so I am no able to take it back to dealer to fix it. please help :?:
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
araheels said:
yesterday i got Jamin but wid old rom
i downloaded the latest unbranderd dopod rom from ftp.xda-devel....
but after completion of all updating my jamin is no longer starts
it is just blinking
screen flashs and didnt disply any thing
i am soo worried plz any body help meeee
i think there is something wrong wid bootloader,
any body knows
plz help
thanks
Click to expand...
Click to collapse
Try flashing it with the last WWE (non-arabic) version available for download from i-mate site.
thanks bro, i did try to flash but its not connecting, becaz its not on, when i press power button it just blink and not turned on, i am so worried, flash is done when active sync is working and the jamin is turned on, its not on
Most likely the file corrupted.
I dont know how to put Prophet in bootloader mode but can be found in forums.
Try to put the device in bootloader mode; and try to flash afterwards.
Cheers
I have the same problem after flashing with a corrupt rom. Only if i connect the JAMin to the power supply and then press and hold continuously at the camera button and press the power button once the device go to the 'boot loader mode'. But this don't help me because i have no connecting to the PC over USB.
read the forum it's written how you can put it on boot loader mode or you can try to hard reset
I don't find this post .
I try the hard reset but they dont't help.
I don't come in the boot loader mode, only if i connect the device to the power supply it works but now i haven't a connecting to the PC.
If i not connected to the power suppley and press now and hold continuously at the camera button and press the power button once there is now boot loader i see only for one moment
a white screen and also for one moment the blue light in the speaker
can i do not install the rom from my sd-cart ???
have anybody the image from JAMin ??
I have the same problem
Did you find solution ?
Forget about power button.
Press camera button. While holding it use the stylus to softreset. Take the stylus out but hold the camera button pressed. In less than 5 seconds, you will enter bootloader screen.
Hope it works.
You must put your device on to bootloader mode, how? Press the camera and the coomon manager (at the same time) put your stylus into the whole (as you made a normal soft reset) put your stylus out of the device but not the camera and the common manager botton, just a couple seconds after.
Don't be affraid is your device creen become with three colors, is normal nad the typical signal is on to bootloader mode. Now is time to find a JAMin ROM in the club imate web (if you are a member) or here in a ftp.
Tell us if you can fixed the problem.
jamin no boot
dear freind
try to connect the power supply to the cabel to enter to the bootmode and try to do software (i have same problem after flashin the jamin by kjam rom )
SAME PROBLEM AFTER DOWNGRADE CAN SOME ONE POSTE NEW ROM FOR THE IMATE JAMIN
probleme solved who want to know how to solve problem pm me
Any idea?
Do you have the solution???
Thanks
hi im having the same problem can u please inform me how u solved it, as im loosing the bootloader screen when ever i unplug it from the power.
buying a cradle will do the job
Jamin flash error
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Try this
Take a look at this thread - I think you are having the same problem as PianoSam
http://forum.xda-developers.com/showthread.php?t=300356
lordlinus said:
Hello guys,
I tried to upgrade my Jamin to WM6 and now it dosent load at all so i wanted to go back to original ROM from Jamin but now it says "This NBF file cannot be used for your PDA phone.Please get newer NBF file."
also, previous used to have IMATE logo and now it displays QteK logo and freezes displaying
IPL 1.00
SPL 2.20.0000
GSM 02.47.21
OS 10.2.0.8
Can someone please help me how to get back to WM5 or WM6.
Thanks
Click to expand...
Click to collapse
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
lordlinus said:
flykthewiz said:
Take a look at this thread - I think you are having the same problem as PianoSam
Thanks flyktewiz,
I did exactly what was told in the thread mention, but now while installing i get the below error
" Error[238]: File Read
The Update Utility can not open the requested file.Please check your Update Utility."
I have closed all the programs that i was using re-started, but still i get this error.
I then tried following http://forum.xda-developers.com/showthread.php?t=291215
and used ROMUpdateUtility_Wizard_NoID.exe instead of the original ROMUpdateUtility.exe and now i get
Error [300]: Invalid Update tool
This update utility cannot be used for your PDA Phone.Please get newer Update Utility
Click to expand...
Click to collapse
Click to expand...
Click to collapse
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
No
It's in the link - just download it from there!!!!!!
lordlinus said:
flykthewiz said:
The thread has been updated to include Update tools for G4 and G3 that worked for Pianosam - have a look and give the appropriate one a try
http://forum.xda-developers.com/showthread.php?t=300356&page=2
Thanks for the help, Can you please re-post RUU.ZIP files (or just a link)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452
Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723
This is driving my crazy.
My Magician (imate Jam) have a radio version 1.13, I wanted to flash the WM6.1 rom but I got the error mentioned in the title.
I've tried almost every other rom that have the radio version 1.12.1 but none worked, always error 114. I've also tried the radio only updates from the ftp but it's the same error (I've tried version other than 1.12.1, including 1.13 the one I have).
My bootloader is version 1.00 if that matters.
- Can anyone give me something else to try?
- Would an SD flash help?
I hate bumping my own threads but I'm really stuck here.
I'm still out of ideas to try. And I couldn't find an SD image that I could try to flash and see if that could help...
Do you have an SD card inserted.
try removing it before you flash.
i just had the same problem and after removing the sd card it went no problem
I do believe that I tried iwth and without a card inserted but I'll give it another shot just to make sure.
Thanks
your device unlocked?
upload C:\RUU.log after attempt.
The device is unlocked.
Flashing any rom works as long as I remove the radio_.nbf file (that applies to the 6.1 rom but obviously it won't run with 1.13 installed).
Otherwise, if I keep the radio file, it just hangs for a couple minute and then exits with the 114 error.
I've attached the log from an attempt to flash your HTCMAG_ROM_WWE_O2 without an SD card inserted in the device. I've renamed the file to txt to be able to attach it.
I really appreciate your help!
Seems like you're becoming the official Magician tech support :0)
Seems like there's no software solution to my issue, I've been seraching nonstop and I found someone on different forums saying that the error I'm getting means that the Flash-ROM cannot be erased and rewritten, so it needs to be repaired (or changed).
Looks I'm suck with what I have. (But please correct me if I'm wrong).
For reference, this is what I'm getting:
17:56:19:455 [err] : RWipe Data Error.
17:56:19:816 [err] : BL UpdateRadio Error.
Click to expand...
Click to collapse
it can be security error also...
Cotulla said:
it can be security error also...
Click to expand...
Click to collapse
If it is a security error, is there anything that can be done??
Error 114 solved for me!!!!
Hello.
I had the same "Error 114" and "Error 113" updating to WWE 04 cotulla rom (thanks a lot for your work!).
The problem was not enought battery!!! The Magician uses the battery in the update process and the USB charge/power supply doesnt work during the proccess, so, if you have low battery power, the rom write/erase cant be done.
I couldnt charge the battery in the Magician after "Error 114", but a friend has another PDA with the same kind of battery and, after a full charge in his PDA and a battery exchange, the update process finished successfully.
I hope this post help somebody.
Best regards.
El Artista.
i've solved the problem installing activesync, leave it opened and uncheck "allow usb connection" in activesync settings
Same problem here ... the batery is to low but !!!! you can charge the batery with the unworking phone:
Plug usb power supply in and remove the batery case on the back. the red light will turn on and the device is loading batery.
Your 6.1 image is flashed now !!! great man ! you rokk