Just got HTC Diamond 2 and i notice that XTNDConnect PC 7.0 is not working
(on PC) “Unable to connect to device. Verify ActiveSync is running.”
(on Device) “Error: Unable to launch \Windows\101\XCPCSyncSvr.exe : Error 2”
Any solutions from your guys?
no one can help?
Related
Hi i hava a Windows CE 5 GPS witch i whant to use as a usb memory stick in my computer.
I dont whant to sync with active sync to access the file located on my Windows CE 5 device
i can install .cab files to is witch is assosiated with just Windows CE 5
i whant it to be a plug and play usb mass storage device
You have a WIN CE 5 GPS? If you have a ppc you can install hdd.cab or WM5torage.CAB (all those can be found here) and make your PPC as a external storage device.
I was able to lanch USBtool.exe (hdd.cab) but i get an instant error
Error
USB Tool.exe
Win32Exeption
at
system.diagnostics.process.startwith
ShellExecuteEx()
at system.diagnostics.process.start()
at system.diagnostics.process.start()
at USB_Hard_Drive_module:1.Main()
I have a Windows CE 5 Core device
WMStorage & Softtick Card Export II didnt work
i just tried to update my HTC PU10 windows mobile 5 to WM6 but then the screen got blank and now i think its in boot loader screen as i read in most of the forums. i read most of the forums abt this for 7hrs now and still stuck coz im new to these.
im using windows 7 on my pc so i cant use Activesync so im using windows mobile device center to connect
i tried connecting to mtty1.42 but my MDA dosnt detect in USB as most of the forums say but when i connect to the pc my MDA screen gose serial to USB v1.01 it mean im in the boot loader screen am i right ? so please tell me wht to do next
thanks in advance
Mudith
Welcome to forums
Have a read on the Wiki here:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Hope it helps,
ok i got my MDA working have to use Windows XP. ROM Update Utility dosnt detect the MDA from USB on Windows7
Windows XP is the best
thanks guys for ur support
hy mudith
i have the same problem with my pda...so please tell me what to do next...i read on forums but my pda doesn't connect on my pc....!!! i don't know what should i do..!!!
Belated Help
Firstly, remove both the SIM card and any memory card. Make sure your battery is charged as well. Can you get into the bootloader (Light button, on/off button and reset button all at the same time)?
If so then your screen should be showing 'Serial' at the top and a number at the bottom. Plug the cable into the XDA and into your PC (it IS a PC and not an iMac I'm assuming?). What OS are you using? XP, Vista or 7?
You need to ensure that 'connect via USB' is DE-SELECTED in either activesync or Windows mobile device centre.
With the cable plugged in, the 'serial' should change to 'USB'. If so all is good. If not, try another cable!
You may also need to ensure you have the correct drivers loaded for Vista and Win 7. I can't get it to work under Win 7 but I can under Vista. XP is preferred for stability for me though.
Now, assuming you have USB on the XDA screen, run mtty (attached to this post) and select usb as the connection type.
Then press enter and you should get a 'USB>' command prompt in the window on the PC. Type (not copy paste) the following:
set 14 0 <press return - don't type this bit obviously!>
Task 28 55aa <press return - don't type this bit obviously!>
Allow each to finish before typing the next and allow the command prompt to appear before exiting.
Then exit mtty and flash a good ROM, I use VNInt with HomeScreenPlus.
Good Luck!
Okay so I recently updated my Ipaq hx4700 to 6.1 Alkor Build 21054 and installed MobileSRC's Mobile Remote v1.1 on it. I want to use it as a bluetooth remote for my PS3 but I keep getting two errors over and over again:
Error 1 (shown at boot up of mobile remote): Failed to load driver: 87
Error 2 (shown after selecting legacy mode, and then checkmark to begin connecting):
Error Connecting: [1062] Listen INTR failed
There was an error connecting to the computer. Please ensure that your computer is on, has Bluetooth enabled, and has an active pairing with this machine.
Any help is much appreciated.
Thanx in advance
During the upgrade of jasjar to wm6.5
After synchronization by activesynic and format the old version
Restart the machine work and entered the boot Loader system
Screen appears, written by usb from the top and bottom of v1.00
And a message from windows xp says usb device not recognised
And stop everything ....
I tried to install the driver of the usb from the cd but the pc does not accept
also tried more pc by xp, seven, vista
But the same thing ....
What is the solution
Where can i download a free serial usb driver for windows smartphone?
What do you want to do? Serial interface is already included via Bluetooth (incoming and outgoing port) - not sure about USB, despite AS connection in "not enhanced mode (RNDIS)" is said to be "serial" as well.
I need the driver to connect my smartphone to a new pc via usb. My old pc crashed recently and i wasnt able to backup any software. Also, ive lost the cd which came with the phone and i dont know where to get a replacement.
You need a driver for the PC, not on the device. I have no experience with new OS, only Win XP. What happens when you connect the device via USB to the new PC?
My os is winxp. When i connect to the pc it says "found new hardware generic serial" then it brings the found new hardware wizard . I cant continue since i dont have the recquired driver on a removable disk or anywhere on the pc.my phone is spv c600
You need to install Active Sync first on your PC. This should install also all needed drivers for the device to connect. Look here: http://www.microsoft.com/downloads/...34-6f7f-404d-a04b-dc09f8141141&displayLang=en
I have already installed activesync 4.5 but i didnt see it install any drivers.
Is WinXP on the latest Service Pack (SP3 I think) and does it have all Microsoft patches installed afterwards?
AS install should put the drivers to the repository for later install when needed - it will not install the drivers right away. Why don't you let the driver's install look for the drivers in the internet - I don't remember any similar problems on my PC.
Search Microsoft for USB serial driver and RNDIS driver for XP if install does not get it for you automatically.
Oh! It has dected the phone. I reinstalled it while the device was connected to the pc and it worked . thanx so much