A friend of mine gave me a kaiser and it had the following on the tri color screen:
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8
First question is what version is that, i was under the impression that there were only 3.XX version of HardSPL.
Secondly how do i go about upgrading this kaiser to a 3.29 or 3.56.
Thank you in advance. You guys are always a great help here. And i did trying searching through the kaiser forum for these answers.
beezza said:
A friend of mine gave me a kaiser and it had the following on the tri color screen:
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8
First question is what version is that, i was under the impression that there were only 3.XX version of HardSPL.
Secondly how do i go about upgrading this kaiser to a 3.29 or 3.56.
Thank you in advance. You guys are always a great help here. And i did trying searching through the kaiser forum for these answers.
Click to expand...
Click to collapse
Search and ye shall find
http://forum.xda-developers.com/showthread.php?t=498320
Im an ass. Thanks ill bookmark that page. Pretty much tells u everything. /me kills himself.
thread closed dude... search is your friend
Related
Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
I have a locked tmobile mda... I forget what I need to do b4 I can flash a new rom... I think all I have to do is CID unlock it right? But I forget how. Any help would be great
why not to read "sticky" threads on the top!!!
cgigate said:
why not to read "sticky" threads on the top!!!
Click to expand...
Click to collapse
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
help wanted
dharvey4651 said:
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
Click to expand...
Click to collapse
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
read the stickies...
especially
How to flash a new ROM to your Wizard... a little tutorial!
VWGolf2.OHH said:
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
Click to expand...
Click to collapse
Which is your device, a G3 or G4,how come we can tell,untill and unless you do not post the vital data of your phone,no one can suggest you any help without knowing the version of your phone.always post the data.
Well 'trustworthy post on how to upload WM6 on my MDA?',why ?,do you think what all is posted here in this Forum is not Trustworthy.
Very rightly said by moseslin 'Read The Stickies',you'll find all the answers here, just "Help Yourself"
bill4676 said:
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
Click to expand...
Click to collapse
which DOC chip version you got,a G3 or G4 ? to verify post your IPL/SPL...? or download the WST Tool,install and run it and post the report to determine if it's a G3 or G4 device.You can download the WST tool here :-
http://forum.xda-developers.com/showthread.php?t=329170
If it's a G3,it's required to first CID unlock the device and than upgrade to wm6.
How to CID unlock,check this guide here :-
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=263116
But if a G4,read here how to upgrade :-
http://forum.xda-developers.com/showthread.php?t=329147
Good luck
Hi everybody!!
glad to be there...I bought a P4550 today (i'm happy happy happy), and want to change rom
My phone is originally sim-unlock (original HTC?) but I don't know if it's SPL-unlock...
I've tried the HardSPLv1 but stay stuck on a grey activesync icon after unplug-plug operation...not so cool...read somewhere from a guy that you can continue the processus. Right?
Some informations:
Bootloader:
KAIS130
SPL-1.56.0000
CPLD-8
Elements:
ROM version : 1.56.406.5
Date ROM : 08/30/07
Radio version : 1.27.12.17
Protocol version : 22.45.88.07W
WinXP with ActiveSync 4.5
So, do I need to HardSPL it?? or can I directly flash the Rom???
Thanks in advance for any information!!!!
again, I'm happy
arno
HardSPL
You most certainly want to HardSPL your device. It's the best invention since sliced bread.
I suggest running HardSPL and then finding a ROM here you'd like and go to town that way. You can seriously spend weeks reading all the posts to find relevant information--use google to search these forums, it yields far better results than the built in one.
FYI on google if you sarch for "Kaiser HardSPL" you'll get results for all kinds of websites...including those that archive old postings here. A quick fix for searches if you're like me and have a Google Search bar in Firefox is to add "site:xda-developers.com" to your search (e.g. "Kaiser HardSPL site:xda-developers.com").
Check this link for more detailed searches using Google: http://forum.xda-developers.com/showthread.php?t=314616
I can almost guarantee that any question you can come up with in the first few weeks of owning/beginning to flash your device that there's no question you can ask that has not already been asked/answered (including this one I'm responding to).
Cheers,
-Q
hi everybody, i have a problem with my kaiser 8925 that after i used for 2 days ,everything was working good ,but a notice that my external memory got stoke and when i pullet out my phone not recognize any storage memory please help me and let me know what i have to do.
Thanks Quentin- for your fast reply!!
Before I posted this thread, I've readen a lot of infos and I can't find an appropriate answer.
Almost all persons who use the HardSPL have an ATT phone, or other, and have sim-lock. That's not my case.
And can't find the direction when you're stuck on a grey icon after unplug/plug. This problem happens on Vista...But I'm on WinXP...I'm confused...
Hope there's someone here who had same problem...
Thanks again for all this beautifull work on xda-dev
arno
For Kanky1
Please, start a new thread...we don't have same troubles...
EDIT...
Welcome OliPof...
I think I was little anxious for no reason...HardSPL ran like a charm...
Sorry for this useless thread...
I've been reading through the forums a bit, and I have flashed a few roms already...(obviously im a noob)...I keep seeing people who say they have SPL: 3.29Hard2. I read through mskip's noob thread for flashing and I used the JumpSPL1.56-KAIS.exe as guided in the thread...
What is the difference between the two?
jbob0124 said:
I've been reading through the forums a bit, and I have flashed a few roms already...(obviously im a noob)...I keep seeing people who say they have SPL: 3.29Hard2. I read through mskip's noob thread for flashing and I used the JumpSPL1.56-KAIS.exe as guided in the thread...
What is the difference between the two?
Click to expand...
Click to collapse
Jump SPL helps you to install HardSPL. HardSPL is what you need to flash ROMs other than stock ROMs.
I went into the bootload to check my SPL and when I did, it says SPL-1.0.OliPof
Should I update/upgrade it? Does it make any difference?
Short answer is that generally speaking 3.29 or above works best w/ WM 6.1 and 3.34 or above works best w/ 6.5 ... but as always YMMV.
Hard-SPL for Kaiser is tough thing to unravel, so here's a splendid resource --> Kaiser Hard-SPL Rollup Thread
BTW, there's two versions of 3.29 and 3.56 -- .Hard by jockyw2001 and .Hard2 by cmonex, and to this day I'm not entirely sure why...
vp3G said:
Short answer is that generally speaking 3.29 or above works best w/ WM 6.1 and 3.34 or above works best w/ 6.5 ... but as always YMMV.
Hard-SPL for Kaiser is tough thing to unravel, so here's a splendid resource --> Kaiser Hard-SPL Rollup Thread
BTW, there's two versions of 3.29 and 3.56 -- .Hard by jockyw2001 and .Hard2 by cmonex, and to this day I'm not entirely sure why...
Click to expand...
Click to collapse
The answer is in that thread (also see cmonex's old sticky)
Question Answered. Please use the mskip - Flashing for n00bs thread for these questions in the future instead of creating a new one.
Thanks
Dave
my English is not the best and i want a new Rom Version on my Kaiser
Found some Rom Versions for me but there dont work.
i hope anyone can help me pls.
here my Infos:
KAIS130
SPL-1-56.0000
CPLD-8
R 1.27.12.32
G 22.45.88.07H
D 1.56.00.00
Ty Viper
Follow this guide [Resources] Flashing Your First Kaiser Rom (For Noobs) any questions/problems ask in that thread.
The sticky and wiki hold alot of valuable info and is a good read.
Thread closed.