Database Info

Faria Rom

I have a wizzard G4....
2.16.0000
2.16.0000
What do i need to do to install faria verssion , the last one ?
Do i need to unlock ?
Thnks a Lot

You need to read alot.

galinha said:
I have a wizzard G4....
2.16.0000
2.16.0000
What do i need to do to install faria verssion , the last one ?
Do i need to unlock ?
Thnks a Lot
Click to expand...
Click to collapse
Wow! I hope this is a gag post, since coming from someone with over 200 posts I would hope you would have spent at least a few minutes reading.
If this is indeed real then I will say the following
1. GO to the G4 forum
2. Read how to unlock your G4. I have a G3 so I have paid not attention to all that hoopla.
3. Read how to install the ROM in Faria's rather long post about it.
4. Enjoy!

I tried to install on my g4, which is CIDLocked, it went through the install but didnt install the OS, the only thing that sucesfully installed was the extended rom. I then used shelltool to flash the OS, and that worked fine.

You need to read.

Great ! I will read.....Thnks for your time.

do you have a wizard or tytn? just make sure you arent flashing this on your tytn, it wont work...reason im saying this, is because you have TytN written on your sig.

I have a tytn ,
But i want to upgrade a wizard.
Thnks for your concern.
Luis

galinha said:
I have a tytn ,
But i want to upgrade a wizard.
Thnks for your concern.
Luis
Click to expand...
Click to collapse
Use the ShellTool:
http://forum.xda-developers.com/showthread.php?t=293480
All the instructions you need are here.
Or you would have to pay to have it CID unlocked (G4). Where, I don't know but supposedly people have paid for this service.

galinha said:
I have a tytn ,
But i want to upgrade a wizard.
Thnks for your concern.
Luis
Click to expand...
Click to collapse
Uh technically, the tytn is the upgrade to the Wizard...
You have a faster processor, and the capability of 3G HSDPA/UTMS data connections.
I think that currently the Wizard has better custom ROM support, although apparently Faria is moving to the Tytn so that might change (and Kyphur has been doing some good work with XDA-Live) but other than that, if I had a money tree I probably would have moved to a 8525 (Cingular Tytn).
Why are you going the opposite way? I am just curious, not trying to bash or anything...

dwny said:
Use the ShellTool:
http://forum.xda-developers.com/showthread.php?t=293480
All the instructions you need are here.
Or you would have to pay to have it CID unlocked (G4). Where, I don't know but supposedly people have paid for this service.
Click to expand...
Click to collapse
I think it is imeicheck.com

Qtek 9100 2 wm6??

Hi!
I've tried several WM6 upgrades posted in the forum, either the upgrade is unsuccessful or the ROM is not aplied to my phone.
Tried the Kitchen v.2, Core 2 etc etc
I'm sure It's not operator-locked!
Do I have to upgrade the OS, SPL and IPL manually with separate roms?
Please help me!
I want wm6 with as many options (progs) as possible!
Is there any ROM out there that I can apply on my phone?
My phone:
Qtek 9100
WM5 OS 5.0 (5.1.195 Build 14847.2.0.0)
OMAP850-195MHz
ROM-version: 2.17.7.1 SVE
ROM-date: 2/13/06
Radio: 02.61.11
Protocol: 4.1.13.28
ExtROM-ver: 2.17.7.103

If you get Error 300 when upgrading then u have to get rom update utility for G4 (probably) (Look carefully in Core 2.0 thread - the first post, there is G4 Users chapter)
If your rom is not flashed but the process goes to 100% complete then probably you have CID locked device, but anyway let the gurus give their advices.

I'm sure that It isn't CID-locked (if that is the same as operator-locked)!

Nope, CID locked is different than SIM Locked

Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike

mostberg said:
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
Click to expand...
Click to collapse
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613

mfrazzz said:
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
Great! Thanx!

Flash ROM for Prophet

Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)

where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok

Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.

you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human

paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
-  ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards

reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want

What is you SPL Version?

NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps

If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^

paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.

As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?

NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice

I think you can find it at pdamobiz.com
but please unlock cid before doing anything

paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.

msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.

G4 wizard... I want tnt 5 + touchflo

i'm a noob in every since of the phrase... i have a g4 wizard running faria crossbow wm6, i wanna go to a stock tmobile rom... then up to tnt 5 wm6 touchflo... i searched all over the site and none of the tutorials were clear enough... so could someone PLEASE... give me an extremely detailed tutorial on how to do all of this, and point me to all the software needed... any and all help will be greatly appreciated.

http://forum.xda-developers.com/forumdisplay.php?f=343

systematic said:
i'm a noob in every since of the phrase... i have a g4 wizard running faria crossbow wm6, i wanna go to a stock tmobile rom... then up to tnt 5 wm6 touchflo... i searched all over the site and none of the tutorials were clear enough... so could someone PLEASE... give me an extremely detailed tutorial on how to do all of this, and point me to all the software needed... any and all help will be greatly appreciated.
Click to expand...
Click to collapse
Here is everything you need:
http://forum.xda-developers.com/showthread.php?t=298613
http://forum.xda-developers.com/showthread.php?t=328917
-McMex

how to flash
ok... i know i sound "rrreeeaaalll sssllloooowwww" asking this question... but just exactly how do i "flash"? also what programs are needed for this procedure?

systematic said:
ok... i know i sound "rrreeeaaalll sssllloooowwww" asking this question... but just exactly how do i "flash"? also what programs are needed for this procedure?
Click to expand...
Click to collapse
C'mon man, this is not a "feed me for free" community. It's a developers forum. It really doesn't sound to me that you are here to develop something.
Start reading and stop asking silly questions or i will have to take charges.
Just so that you don't think I am truly a bad person :
Connect the PDA to the PC using the USB cable
On your PC start the Rom Update Utility(aka. RUU)
Read and follow stepps and try not to start any programs while the RUU is updating your rom and you'll be fine.

learning?
ok so bear with me... i thoroughly read equinoxe's tut, and was wondering; do flash the t-mo oem rom, than follow the tutorial to step up to tnt 5 pro?

systematic said:
i'm a noob in every since of the phrase... i have a g4 wizard running faria crossbow wm6, i wanna go to a stock tmobile rom... then up to tnt 5 wm6 touchflo... i searched all over the site and none of the tutorials were clear enough... so could someone PLEASE... give me an extremely detailed tutorial on how to do all of this, and point me to all the software needed... any and all help will be greatly appreciated.
Click to expand...
Click to collapse
here u said, ur a complete noob and u dont know how to flash,
Than how come u already got faria crossbow on ur wizard ?
well, either ur kidding or u bought it just now with faria crossbow already installed ???

i bought it like that

OK , if u r on a CID LOCKED G4 u need to reinstall the OEM rom then install shell tool or SoftSPL and install the TNT rom using shell tool / SoftSPL
shell tool
http://forum.xda-developers.com/showthread.php?t=293480
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
READ ALL THE POSTS IN THIS THREADS BEFORE TAKING ANY ACTION
B,R

i'm learning
i have gotten as far as wizard love rom, and i've hard spl'd but shelltool doesn't seem to like my device... sometimes it freezes completely, and if it doesn't freeze it wont boot past the ffx looking screen. i've also tried the custom ruu i found in one of the tutorials.

flash back
at first you must flash back to an original rom. you can download it from the site from your provider. than you can start the shelltool.
remember that the screen from your wizard must be completly white bevor you can continue.
good luck

i've successfullly flashed tnt 5 pro... thanx to all who pointed me in the right direction...

systematic said:
I've successfully flashed tnt 5 pro... thanx to all who pointed me in the right direction...
Click to expand...
Click to collapse
Glade u have got it up and running,enjoy the new lunacy of Rom Flashing
This is an excellent Forum with wonderful and helping Moderators and senior members always there to help u out.We all have come here as newbies,but have gained alot,good luck

Flashing an AT&T tilt with an Official HTC Rom

Hello,
I have recently bought a AT&T Tilt, and would like to flash to the current Offcial HTC WM 6.1 ROM.
I have done alot of reading in the wiki here and various FAQ threads and what not. But i am still a bit confused with a few things.
I have read the ROM Flashing faq and Intro here:
http://forum.xda-developers.com/showthread.php?t=356895
And i understand all that.
I also undestand that i need the Key board fix from here:
http://forum.xda-developers.com/showthread.php?t=334911
But thats not hard.
I went here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
BUT Its all this stuff about SPL's and what not that is confusing me.
My Tilt is SIM unlocked because i am using it on the Telstra network here in Australia. But im not sure if i have to change SPL's or not and if so, which spl i need and how to change it?
It would be greatly appreciated if someone was able to help me understand this SPL bussiness, because i really dont want to dive straight in a risk my device. I have done a fair bit of reading and i'm a fairly competent computer user so it won't take me long to learn.
Thanks in advance,
eMiller

you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program. (this is what i know from Hermes, so i don't know if it is exactly the same on Tilt). It breaks the warranty though, so think first, then jump
by the way, you should try a cooked rom. in my experience, HTC roms are not that good, except for getting a stable radio. get the radio, then get a new OS rom, like hang.tuah or something.

warsng said:
you have to CID unlock it. this involves flashing the device with HardSPL then running a unlocker program.
Click to expand...
Click to collapse
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?

here you go
eMiller12 said:
Ok thanks. Can someone please recomend the best hardSPL and unlocker program for my needs. What do other people with Tilts recomend?
Click to expand...
Click to collapse
Try this one:
http://forum.xda-developers.com/showthread.php?t=334679
Look for the Zip file at the very bottom of the screen this hard spl will let you flash any rom (follow the instructions the spl gives you exactly and dont get nervous if it appears stiuck for a bit), just make sure you know which ROM you really want to flash at the end
.

Again same stuff.
Guys, when you gonna learn to read everything which is realted to your device when you want to do something?
Everything is in Wiki, everything you need is posted in ROM threads.
Come on GUYS!

read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel

@joel2009: That is a little harsh. Also, if you're going to call someone an imbecile, you should probably spell it right.
@eMiller12 (fellow noob): I don't know if I would bother with the HTC ROM, I just flashed it and I am finding a few really annoying bugs... Read Jocky's STICKY post about the HardSPLs to learn how to flash one. It really is quite simple--and it's unlikely that you're going to brick your device, so no worries.

Hey FireMedic, thanks for understanding.
I have read through the Wiki a fair bit, i was just unsure which versions of hardSPL etc where best for the [email protected] Tilt inparicular. But i will just use this one that vorostatz recomended if that is the best one for the tilt.

joel2009 said:
read the f**** wiki. you need hardspl. its not that hard to figure out if your not an imbisel
Click to expand...
Click to collapse
We are not all senior members. I can fully understand the guys wish not to turn his expensive device into a paperweight. Ease up eh?

search forums using google (at top right)
yeah, exactly... I was pretty scared to hardspl when I first started.
Hardspl 3.29 seems to be the best one, check my signature after you've read the hardspl sticky.
From what I understand, a rom flash might try to write a different spl which is obviously bad. hardspl prevents this.
If you ever need to, you can undo it. Kyphur explains in the hardspl sticky how to change them, by running a program named jumpspl 1.56 (on your device) with your sim and sd cards out and then flashing the spl normally.
Just make sure you follow directions for your device and try different roms.
Good luck and feel free to ask questions, even if some of the people here have heard them way too often.

Special ROMs for Australia
eMiller12 said:
I checked my device and the rom currently on it is the AT&T WM6.0 1.57.502.2 Original Shiped Rom.
I figured, being in Australia, i would need rom that had WWE as the country? So i downloaded the "RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship" rom. Is this an appropriete ROM for what i want?
Click to expand...
Click to collapse
Actually the WWE (World Wide English) one seems to be used more in Europe and this side of the world. For down-under, they use SEA South East Asia versions. There are issues with ROM compatibility in Australia specifically (at least in the WM 6.0 days) so if you want to know the best official WM 6.0 and 6.1 ROMs, short of searching for what setups Australian xda-dev forum members are using, you could look at the devices on sale in the shops. If you're wanting WM 6.1 just to have the latest and greatest, think again and have a look at the Windows Mobile 6 vs. Windows Mobile 6.1 thread.
***Edit*** Also note that there are two Australian specific ROMs in the WM 6.0 section of the Kaiser HTC ROM wiki