Hello guys. I'm new here and i really don't know where and how to look for what i need ...So if you can please help me here is problem:
- I have a HTC TOUCH Cruise and i don't like it's today screen and averything. Is there a way i can make it look like a HTC Diamond? I mean the whole today skin, picture swaping, sms swaping, and everything?
What is that I need to know and what to do? Or where to look for and what to look for
I give a beer to the one who helps me
just flash the rom mate... see hard spl posts etc...
you can now even go winmo 6.5, which i have!!
After I flash the rom will i be able to restore the original one if I don't like the new one? Hard-reset will bring the original rom or the new one I just flushed?
You will be able to reflash your device with your original rom again, you can download it from here. When you do a hardreset it will just reinstall the OS what is installed at the time.
TheDisneyMagic said:
You will be able to reflash your device with your original rom again, you can download it from here. When you do a hardreset it will just reinstall the OS what is installed at the time.
Click to expand...
Click to collapse
Can this go wrong?
When i tried to flash a wm 6.0 rom on my HTC wizard
it went wrong and now is my wizard dead.
is this without risk?
always a risk, nothing guaranteed...
If you are confused with the vast choice of Roms (as I was), have a good look at C Shekar's "b" rom - i installed it six months ago and have no regrets at all.
After flashing the rom, you then go and choose a "today" screen (manila) screen that you like.
Good luck.
s8tan said:
After I flash the rom will i be able to restore the original one if I don't like the new one? Hard-reset will bring the original rom or the new one I just flushed?
Click to expand...
Click to collapse
hehe,i don't think so
Related
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
Please please can someone help,
I am very new to this and need someone to help guide me through this.
I have a HTC Touch pro and want to wipe it clean so when i turn it on there isn't the orange start up image......???
I have tried factory reset and tried the thread (Flashing your First GSM Raphael Rom (For Noobs)) and it didn't help. When i turn on my device it will comes up this the orange image.
Please can someone help me
Keep up the good work everyone
Many thanks Jason
So basically you want to change the splash screen from the default Orange one to a new one?
Some rom's (like ROMeOS ones) include a new splash screen so flashing one of these custom rom's will wipe the phone completely, getting rid of all the data on it and replacing it with new software. I'm sure you can find a pretty clean one with just basic windows mobile if you try.
Otherwise if you want all the software that's on it and just want to change the splash screen there are basically rom files with nothing in them except the new splash screen (i think). You'll have to search the forums to find one that you like etc.
Just make sure you've read everything about flashing the phone before you do it. You'll want the Olipro bootloader first etc.
Maz
Thanks iammaz, i have flashed my phone using Raphael Rom (For Noobs) and it's till on there i don't know what you mean by looking for ROMs as i don't know how to put different ROM's on my phone,
Sorry if this sounds such a basic request but i've never done this before
Ideally i want to restore the phone to what it would be if you bought it SimFree from HTC, so no 3rd party software or plugins,
Thanks for your help
Does anyone know how to do this? help please
Flash it again with an original ROM.
lol. deedee, did this require you digging into the depths of your brain?
lol, keep it simple, just how i like it
It was one of those flashes of inspiration moments.
Great fan of the KISS school of thought.
lol. nifty.
where would i find an original rom to touch HD?
squirtoise said:
where would i find an original rom to touch HD?
Click to expand...
Click to collapse
Welcome to the forum
Please READ and SEARCH before posting...
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
so these roms are .exe files. when i flashed my cooked rom it was a .nbh file and i just put it in the root of my storage card and when to bootloader mode. for this original rom thats an .exe file, how would i flash it? please help me because i don't really know. sorry for the inconviences, im still new to this stuff.
................connect your phone using a usb and make sure an activesync connection is active. Run the .exe and go through all the steps. It starts flashing and the percentage bar shows. It finishes and re-boots. Your done ....
and no need to do a hard reset after flashing original rom
thanks. i have one more question. if i flashed a rom using the storage card method, when i change my rom say to another cooked rom, do i just add the new .nbh file to the storage card and delete the old .nbh file containing the old rom?
Me = n00b
I have a touch diamond (gsm) with 6.5 but I wan't to downgrade to the original 6.1 rom from htc's website. Will hard-spl (olinex) prevent me from doing that?
Thanks in advance
No it wont hurt, in fact the hard spl will be reverted back to HTC original one, so all is well. Dont worry and just go for it... just curious, why you flashing back to original?
timmymarsh said:
No it wont hurt, in fact the hard spl will be reverted back to HTC original one, so all is well. Dont worry and just go for it... just curious, why you flashing back to original?
Click to expand...
Click to collapse
Check out this thread will explain the whole thing, don't wan't to double up the whole forum.
http://forum.xda-developers.com/showthread.php?t=502357
Daan
Hi all, i am new with wm phone. I am using my htc touch pro now and after i see the new touch pro2 i want to know can i install touch pro2 to run on my touch pro??? Is it called touchFLO 3D? or manila??? i want the new calender, contacts and the new sms in the new touch pro2
FLASH A NEW ROM TO YOUR PHONE...not yelling caps were on
It's probably not a good idea to create the same exact thread in multiple forums.
Go read what I posted in your other thread that you made.
thanks for the info, and sorry for multi post in the wrong forum will try to close that. And can i ask something? i've been reading the [Resources] Flashing your First GSM Raphael Rom (For Noobs) from the start, up to page 35 for now (i need to finish another 80 pages or so to complete reading it up) but i don't seem to find any question related to what i want to find out so i might just ask it here;
As i am new to flashing rom, i know if i want to flash some nice rom to my touch pro (i'm using the singtel WWE stock rom)
1) i need to hardspl it so i can flash any other rom into my phone, flash the new rom that i desire etc.. and the important question is.. if i want to completely reverse my phone back to the original stock condition, stock hardspl / stock rom etc (like from the 1st day i got it, very very stock and original). I know i need to flash back the stock hardspl and stock rom and so on... So after all the flashing will my touch pro be like a really original stock touch pro??? Or will it be i am only flashing another rom but it is an original stock rom back to my device... Anyone understand what i mean???
2) Actually i need to ask about the radio thingy but i think i'd better wait for my 1) answer, cuz if i can't get my phone back to the original stock condition after i flash some wm6.5 rom in it i might not want to risk flashing...
Any advice are appreciated, thanks
hardpsl is a one time thing, once you flash it, you dont need to keep using hardspl to try new roms. when you want to revert to the original rom, just go to HTC singapore's site, under support, go download the rom. it will be the singtel wwe rom. if you're worried about warranty, there shouldnt be an issue, i reflashed the singtel rom to my phone before sending it to harborfront for repair, and there was no mention of me reflashing the rom, and they repaired my phone as required.
ps, you dont really need to read all 80 pages of the thread, just get to flashing. hardspl, then try the energy rom (thats what im using) and see how easy it is.
cheers,
regkia said:
thanks for the info, and sorry for multi post in the wrong forum will try to close that. And can i ask something? i've been reading the [Resources] Flashing your First GSM Raphael Rom (For Noobs) from the start, up to page 35 for now (i need to finish another 80 pages or so to complete reading it up) but i don't seem to find any question related to what i want to find out so i might just ask it here;
As i am new to flashing rom, i know if i want to flash some nice rom to my touch pro (i'm using the singtel WWE stock rom)
1) i need to hardspl it so i can flash any other rom into my phone, flash the new rom that i desire etc.. and the important question is.. if i want to completely reverse my phone back to the original stock condition, stock hardspl / stock rom etc (like from the 1st day i got it, very very stock and original). I know i need to flash back the stock hardspl and stock rom and so on... So after all the flashing will my touch pro be like a really original stock touch pro??? Or will it be i am only flashing another rom but it is an original stock rom back to my device... Anyone understand what i mean???
2) Actually i need to ask about the radio thingy but i think i'd better wait for my 1) answer, cuz if i can't get my phone back to the original stock condition after i flash some wm6.5 rom in it i might not want to risk flashing...
Any advice are appreciated, thanks
Click to expand...
Click to collapse
thanks buddy, glad to see i'm not the only one trying to flash my touch pro rom in here just to check u didn't flash your hardpsl from olinex 1.90 back to the stock 1.90 hardpsl??? u just reflash the singtel from to your set they didn't notice it??
Hi guys,
nice work from JockyW, ookba and everyone doing the job to bring us excellent software (pls if i forgot anyone, don't be mad ). I really appreciated the RUU_MAPL_3VOLUTION_WM65_3VO.2.50.112509 for a long time but I will sell my Maple now. It time to move on and try something new. Thats why I need to go back to the Official HTC ROM. I just cannot get it to work...
Obviously just flashing the original HTC Rom won't do the job because of the Hardspl, but how do i get around this. I just need some help on going back.
Thanks in advance, UKFencer
160 hits and nobody got an idea...? Or is the answer too simple?
If i am missing something pls point me to it.
Thanks,
UKFencer
Sorry, I don't think I have any idea. I *think just flashing the original ROM should work, I have upgrade/downgraded other phones with factory/custom roms with no problem. I have a question on top of yours. If I don't Hard SPL, what do I lose? There's a thread about downgrading the HardSpl to 1.19 or 18, I don't know if that helps. I would like an answer to my AT&T question as well. Sorry about hijacking your topic but I at least bumped it.
Download original rom in HTC website. Thats all.
Or you could use goldcard model to flash back to original WWE ROM
alinkwok said:
Or you could use goldcard model to flash back to original WWE ROM
Click to expand...
Click to collapse
where can i get that?
Sorry, for not replying any earlier, but was finishing my finally year project...took longer than i thought...anyway now i back to re-install the original firmware...
@Sonnguyen
doesn't work because of HardSPL...tried it.
@alinkwok
yeah, i've read about it...without a seccond mobile, i'll have to buy the software if i recall correctly.
So, any other tips where to look for howtos...?
UKFencer
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
orb3000 said:
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
Click to expand...
Click to collapse
Yes, I agree with your sentiments regarding the ROM, point is however that once the custom ROM is flashed with the Hardspl, the original ROM cannot be flashed back, which is sometimes required, especially if something happens to the phone and it has to be returned for repairs etc to the retailers.
Strange, it´s the 1st time I know that an HTC device can´t go back to original ROM...
I´ll do some research...
The original SPL is included in the package you downloaded from here..... Just have to use it, flash original rom, and you are on your way....
How exactly do I flash the original spl nbh file? I tried replacing the hard spl nbh with the original and running RUU but the spl remained the same.
you need to get the one from here: http://forum.xda-developers.com/showthread.php?t=558003
there is a folder marked original spl in there. it is the same process you did when you put the hard spl on there, just using the original nbh