Related
I have bought a Plantronics M3000 bluetooth headset for my QTEK 2020. I have no problems pairing, calling and answering. However the headset just shuts off after a few minutes of conversation. It doesn't just cut the conversation but shuts off. I can make multiple short calls but nothing longer than 3/4 minutes. It works, however, without problems on my wife's Ericsson T68. Anyone can help ? Thanks.
Marek
Hello,
I have the MDA2 (same as QTek2020) and a Plantronics M3000 and It's been working just fine.
The problem you describe it's very weird since you mentioned that the headset works fine with your wife's mobile, and that makes me think that your QTek has some sort of problem with the Bluetooth stack or hardware.
It may be well worth to try (if possible) another headset just to make sure that is not the M3000 fault.
Do you see any type of error or message on the screen at the time of disconnection?
Does it always cut the conversation at the exact same moment?
Does the problem match the time the QTek takes to power save?
Any other clues?
Thanks.
I did not have the occasion to test another BT headset on the Qtek. When it shuts down there isn't any message displayed.
I have no problems with the BT stack (with the Pocket Bluetooth Tools patch) when using it with a BT GPS (Emtac) receiver, it works for hours.
However, your suggestion that it might happen when the Qtek goes in energy saving mode is interesting. I will check that tomorrow.
I'll post the result.
Hi
I seem to have a similar poblem after installing pocket bluetooth tools!.
I use a Jabra BT 250..and I noticed that the headset just mutes during the call..
I am generally used to switching off the display of the XDA after placing the call to power save ...
So I discovered that the headset would mute whenever i switch off the xda after making the call (which it never did prior to installing PBT)!
any thoughts on that?
maybe it has to do with the auto switch off plugin?
Actually I just experienced that too...
If I place (or answer a call) the next time I try to use the phone via the BT headset I notice the BT headset was turned off... Yeah, it could be related to the Powersave feature on the today plugin that PBT installs as a plugin... :roll:
Need to investigate...
Best regards,
Rayan
Both my bt headsets have stopped working since installing pocket bluetooth tools latest version, I have reverted back to version 1005 and everything is fine. I have a sony-ericsson EBH-65 and a skypower clip on headset.
my platronics does the same also its annoying you cant even transfer the call back to the device you have to hand up turn off bt and then turn it abck on and headset mode back on it also does the same on my pc
when im on msn using it as a headset it just d/c and i have to turn it off and turn it back on again
dont see what the problem is
btw the range on the xda2 and platronics is amazing i had it on my bedrooms desk and i went outside it passed through the living room wall and the patio window and i was stood 5m down my garden im sure it would of been over 10m and it was still working if i kept still when i moved it went crackly but ah well lol
just hope someone sorts the prob out
Hi,
I was having the same problem with the M3000. I just had confirmation from Plantronics that this problem is a bug in the product that occurs with the XDA II. I am currently in the process of returning the product.
Regards...Mike
Same problem M3000 doesn't work. Give up now before too much frustration makes you feel ill.
Try the Hello 2 headset. Work with my Aussie XDA2 and is very small and lightweight. Even had a neck chain to carry it around like a USB drive.
Since v1.60c my bluetooth second binding/connection is distorted.
In the car, first my TomTom gps binds and connect perfect and then my carkit Parrot 3100 binds and connect perfect. But when i make a phonecall, the line is very distorted. Some buzz is on the line.
And if i change the sequence, by first binding the carkit, and after that trying to bind the TomTom gps. The gps will not bind at all.
The last version that worked correct was the version 1.60c
Somebody with the same experience?
PS. is it possible to extract the Bluetooth files from the v1.60c version and save on the latest versions?
Gps & Parrot Together With Wm2k5 : Bluetooth Incompatibility ??
Same happens to me.
I'm experiencing this problem since I upgraded from WM2003SE.
Every WM2K5 ROM I've tryied does the same.
If once gps and parrot both are binded, you go to bluetooth settings/devices/and you disable hands free service, wait for few seconds and enable it again, then the parrot should work with no trouble.
It's the only that works to me...I have to do it every time I get in my car.
If somebody has the solution I would apreciate.
FRANCESC
Yes, it works for me too. But it isn't a beautiful way to connect!
Somebody know what this could be?
hi
could the both of you with the parrot 3100 please tell me:
.) does it sync the phonebook with pda's contacts?
.) does it show the name of the incoming call?
.) does it show mobile providers net status (=strenght)
if not: have you tried www.jetwaremobile.com ? does it work with that "enhancement"?
thanks!
regards ize|man
I will try!
Thanks for this information, I'll try.
izeman said:
...
if not: have you tried www.jetwaremobile.com ? does it work with that "enhancement"?
thanks!
regards ize|man
Click to expand...
Click to collapse
Not working for me!
I think that I'm suffering with the same problem. I used to use a Nokia CK-1W for hands free and a iBlue BT GPS with Tomtom6 on my Jasjam/Dopod/Hermes and had no problems whatsoever. I've just changed the car and have fitted a Parrot CK3100 (FW 1.6C) and I can no longer connect to hands free and the GPS at the same time.
If I bind to the GPS first everything is fine until I attempt to pair with the Parrot. Upon pairing synchronisation starts and then for some reason the bloody thing starts to make a call!!! The phone doesn't recognise that it's calling, it's just the kit doing it. Once paired and synched the GPS connection is killed.
If I bind to the Parrot first I have no bizarre calling issues but I am unable to locate the GPS device.
What the hell? Have I bought a turkey?
Anyone with a suggestion as to how to fix it?
EelcoV said:
Not working for me!
Click to expand...
Click to collapse
so. none of these three questions is answered with YES? does it work out-of-the-box?
so if i get you right: there is no way to sync my contacts with the 3100?
thanks ize|man
I mean it's not solving my problem
Didn't solve mine either. In fact, it made it worse! I still have all the connection problems but in addition, the battery meter no longer shows on the Parrot. Uninstalling jetware returned the meter.
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
academic said:
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
Click to expand...
Click to collapse
Thanks for your answer!
I try with another headset...
Sirius75it said:
Thanks for your answer!
I try with another headset...
Click to expand...
Click to collapse
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Sony Ericsson bluetooth headsets work also just fine.
butzchan said:
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Click to expand...
Click to collapse
I have the same problem with my Motorola H700!
Going to try an old Jabra headset this evening.
Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
I have the same problem and sometimes I re-apply pairing between the headset and my polaris
same problem with Motorola H700. and olso motorola HS 810
They seem not to be compatible
I have reconnect my old carkit bluetooth Parrot CK3000 Evolution and with my HTC Touch Cruise work very fine!
With my old P3600, the parrot ck3000 evolution don't work fine but have problem with audio and connection, therefore i had unplugged and i had buy the headset Motorlola H700 thed worked well with P3600...
Same problem with Jabra headset
I have also exactly the same problem with a Jabra headset.
I found that the problem only occur when bluetooth is first activated on HTC and then activated on the headset. if I do it in the other way it works fine.
that's also the reason why it works after a soft rest of the HCT or disconnection reconnection of bluetooth on HTC.
Does it only mean that the headset is not compatible or is this a problem on the HTC.
Vincent
I don't know the bluetooth 2.0 + edr is compatible with motorola headset
perhaps a bluetooth incompatibility
i read on it http://direct.motorola.com/ENS/HKernel/H700_Headset_detail.asp
this : # Bluetooth Class 2 for wireless connection of to 10 meters
(30 feet)
# Compatible with Bluetooth 1.2- or 1.1-enabled mobile
phones, PDAs, PCs, and more that support headset and
hands-free profiles
I had the same problem with the H700. It connected fine the first day, and I used it for about 15 minutes. The next day, it wouldn't stay connected at all. Tried to re-pair, etc..no luck. My Jabra BT-125 works great, as does my LG HBM-730.
HTC patch for bluetooth
I saw on HTC (in the e-club section) that there is a patch for Touch (is it touch only or touch cruis also? I don't know) regarding "bluetooth connection problem".
Unfortunately I cannot download it.
If someone can do it, I'm interested.
Vincent
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Where I can found the patch ?? I want to try it on my cruise. If don't work I will restore all with a backup file...
you can found it on HTC web in the e-club section. If the patch works properly write it in the forum please!
mesmo said:
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Click to expand...
Click to collapse
Same specifications but different motherboard. Don't try it.
Ok......... thank you, I'll wait for another solution
After more and more test, I have found that the problem of the motorola Headset HS850 (and I think H700 etc. etc.) is the boom switch.
If you pair the headset to the Cruise and use it, it works fine (not stop after 3-4 seconds). Works great also bluetooth audio program:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
for redirect all audio to the headset.
But... if you switch off the headset with boom close, next time it will not work more than 3 seconds
So, the problem on this motorola is the automatic connection when open the boom.
Sony Ericsson HCB-700
Hi. I seem to be having similar problems. I had 3 phones linked to my HCB 700, and all worked fine. Very occasionally, I would have found that one wouldn't pair up when the ignition was switched on, but with my old Orbit 1, that may have happened once a week. I got a new Orbit 2, and was able to pair it easily. Now, it never fails to start paired, but frequently drops the BT connection. Usually a simple button press links it again, but it will rarely stay linked for more than 30 minutes, and could drop the connection 3 or 4 times in 10minutes. Then it may work for 30 minutes. I tried a reset to default settings, and re -paired the two again, but it doesn't seem to have made any difference. This can happen whether I have used the phone or the handsfree or not.. I'm thinking of getting a Parrot kit now instead - any ideas? Thanks in advance..
Hi All,
I just had a brand new Car with Bluetooth. (Citroen C4 Grande Picasso)
With this Bluetooth I should have the abbility to to connect, answer, and scroll trough the contacts, of my phone. I'm using a Wizard G3 with WM6 (Dutch) IPL/ SPL 3.08 and Radio: 1.08. (Radio will be updated soon)
Probelm is: stuff is not working! I can connect the phone to the car with Bluetooth and it is recognizing it. When I make a call or one comes in, the Car sees it and mutes the audio. But that's all. I do not hear anything and I can't be heard. Also the button (on the steering wheel) for contacts doesn't work; meaning: It says: there are no contacts.
Who experienced the same pproblems and more important who solved these?
Hi Jedeve,
I have the same problem with the same car. It worked for me when I first started TT and then automatically my bluetooth GPS mouse was connected and all was working fine. Strnage but true. It looks like if a channel is set open when connecting to the bluetooth GPS mouse and stay open so evrything is working. I also have looked into registry setting son bluetooth if I can find differences by using diff but no strange differences where found.
I also talked to the Citroen dealer and they told that it might be possible that new telephones with the newest software are not able to work correctly with the carkit.
I have a Wizard (I think a G3) with Octavoi 9.2 on it, IPL/ SPL 3.08 and Radio: 2.71.11.
Hi,
same car and same problem here.
It seems worked with WM5 and problem showed after upgrading to WM6.
Calling/answering from car controls ends with total silence most times.
I've noticed that if a call is answered from phone it works most times.
Also car phonebook seems support only latin characters and any contacts with non-latin ones(cyrillic in my case) do not appear on car.
Would appreciate any suggestions/solution to above problems.
Hi,
I have same problem, with same car! with TNT wm6 Roms!
With new TNT 6.1 did not try yet...
Now I have Slim wm6.1 ROM and no problem! With NTS wm6 rom not problem too... works fine!
Hi,
I am using my HTC Touch Pro with an Opel Vectra built-in bluetooth carkit.
All functions, like browsing the address book and call registers, are working fine. However, at random times, my carkit reports no phone. When I then check my Touch Pro's bluetooth status, I see that it is has been disabled.
After manually re-enabling it, I can pair with my carkit for as long as it takes for bluetooth to turn itselves off again.
I've already tested with JETware, but that does not change anything. Also tried the universal broadcom bluetooth stack, but doesn't seem to work on the Touch Pro. HTC only comes with a standard answer that they don't support all carkits and headsets... Since the BT stack on the phone seems to crash, I don't think it's a carkit issue.
Anyone here with the same issue? And maybe a solution?
Thanks and regards!!
Start -> Settings -> Connections -> Bluetooth -> Timeout (tab). Turn off Visible mode set to "Never".
I think this must be your problem.
Hi Freco,
Thanks for your reply! This option is set. However it's not really the visibility that turns to invisible, but the whole bluetooth stack is being turned off completely. Need to fully re-enable it via Comm Manager.
Any other options? Does anyone know if there is a working broadcomm stack for the Touch Pro?
Regards!
Hi,
I have exactly the same problem with a Vauxhall kit, I have tried all sorts of things, but nothing seems to work
try:
start -> settings -> connections -> bluetooth
timeout tab
select 'never' from drop down box
Hi Brendo,
Unfortunately this doesn't solve the issue. Once paired, the connection even works without being visible. It's also not a fixed period of time before the disconnect takes place (can be within a minute, sometimes after half an hour). However, the whole bluetooth icons disappears from the top icon bar and comm manager shows it's turned off completely.
Hope somebody has any other ideas, because the only thing HTC can do is point to the carkit vendor :-(. Since all functionality is there when connected and the phone is turning off BT in some way, I really don't think this is caused by the carkit vendor. I should at least expect BT to stay enabled on the phone.
Thanks!
Yes, same here, BTW I have tried this in my Friends Saab, and the same problem.
same problem here with a Opel DVD90 buildin bluetooth carkit.
With other htc phones it always worked like a charm, but my mda vario IV continuously disconnects after a random time period and shuts down the complete stack.
Try this!
I have the same problem with my opel with original bluetooth-kit (2007). On the touch pro I changed the band and network from auto to GSM, as G3 reseption in this area is quit poor, especialy while driving. It helped for me, at least the last few days. I agree this has been an annoying problem.
I have tried to switch to "GSM only mode" in the past, but as far as I remember it does not completely solve the issue. However, I will give it another shot! Actually I can't figure out at what point it occurs... It can happen within a minute or after half an hour without using any funtion.
Does one of you know if there is a way to do some debugging on the Bluetooth stack?
And has anyone experience with other Windows Mobile 6.1 based phones in this combination (just curious if it's a WM issue or HTC only)?
Furthermore I did some tests with JetWare. You should be able to limit the number of synchronised items then (might be related to this issue). However, it looks like this configured limit is being totally ignored: when I limit my recent call list to 5 with JetWare, it still syncs about 25 items. Anyone tested with Jetware?
I have tried the GSM only mode, this didn't help either
I have now given up and got myself a Nokia E66, which works perfectly.
All contacts are pushed to car, no disconnects and AD2P works so my mp3 ringtones play through the car speakers! Sweet
Word of note, I had issues with N-Series phones, would connect ok, but contacts would not push.
I have the samen problem with my HTC Touch Pro and Saab.
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
ExTREmE99 said:
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
Click to expand...
Click to collapse
I am having the same problems you describe. Anyone got an suggestions???
I encountered the same problem; first with an opel udp carkit and next with the bluetooth interface software from homeseer.
It has something to do with phone signal loss.
With the opel carkit I noticed bluetooth automatically turns off when the phonesignal switched from 3g to gsm.
I also noticed that in my home, BT turns off whenever I have been in a room with no phone-signal reception.
try this thread, both registry change and attached cab file, reset. DOn't worry if the make visible to all option is unchecked.
http://forum.xda-developers.com/archive/index.php/t-314996.html