Related
I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
hey ian,
it was just recently that i was able to figure out the bt-xda2 bonding; thanks to some helpful chaps in the forum. in the process; i did some research within several topics and read something which may answer your query. when the headset is back in it's cradle; i believe it's "turned off" or is put into inactive mode. the forum message i read indicated that the bonding is lost once the headset is turned off; thus you have to bond again. yes, i have had similar experiences while figuring out the bonding issue. i just keep the bt200 i have out of the cradle; when the time comes to charge it i then holster it and repeat the bonding process once it's charged. i don't think it's a problem with neither devices; it's the default setting i believe. with luck probably the xda-developer guys will come up with a bug fix for this item. which could also include using bt for other than the phone function...like mp3....hint! hint!
cheers
robson
Ian_Goulding said:
I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
Click to expand...
Click to collapse
I've installed Towa's GPS BT patch and the Jabra works perfect.
hey redbull,
what's the Towa's GPS BT patch and where can i find a link?
cheers mate
robson
Towa's gps patch has nothing to do with this...
I'm not sure what you are talking about, but Towa's patch will not solve the Jabra BT200 issue. The more important question to look at here is what version of BT200 you have. If you look on your Jabra BT200 right next to the microphone, there is a combination of letters and numbers, what does yours say? I think the problem has to do with issues in the firmware in the Jabra that were fixed in later versions.
It's usually 2 numbers and a letter on the boom to the Microphone.
I have a 47A and it does not work at all. Also tested a 48A and it doesn't work either.
mine's a 48b. works fine.
Cool, just so we are talking about the same thing, you can turn off the Jabra BT200, and turn it back on, and it still works with the phone? You can charge the headset in it's charger and pull it out and it still works? You can go out of range and then back in range and it still works? You can press the answer phone button on the headset when no call is in progress and then try to make a call and things still work?
Please try these various things and let me know.
I know that the A models are from 2002, and the B models are 2003. So it is possible if yours works with all these scenarios that they fixes or changed something in the 2003 models that allow them to work.
Thanks for your time,
LouisK
I recently purchased a BT 250 with nr. 44B and indeed it works with all the tests you described. (Don't need the BT GPS patch for that)
If only the advanced Headset Profile features would work with the MDA II I would be in heaven...........
Ok, it seems based on feedback I've gotten from several people that any Jabra Freespeak that has a "B" as the last part of it's version number will work correctly, but the "A" models do not. The "B" models according to Jabra are the most recent, and thought they don't admit it, there must have been a change in the firmware that allows the "B" units to work correctly with an XDA2/MDA2/i-Mate that the "A" units don't support.
LouisK
I have a "B" on mine and the same problem of rebonding when Jabra is shut off. I experimented by turning off bluetooth on the i-mate and it still worked. Anyone have ideas of a good headset that will not need rebonding?
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
48B works fine for me... can't everyone else just use TOWA's patch... that fixed the problem for others
stryker said:
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
Click to expand...
Click to collapse
16B is no good. I've been told that minumum needed is 19B. Below 19B is bluetooth 'handsfree' not 'headset'.
Towa's patch has nothing to do with this. It will not help in this situation. It only applies to Bluetooth Serial Profile, of which the Jabra has none. I have talked to Towa via email to confirm this. For those that installed Towa's patch and said it works, more than likely they didn't have the problem anyway because of the version of Jabra they had.
BT jabra 200/plantronic M3000
Jabra is model 45B, - no nead to repair, Plantronics M3000, no need to repair, but sometimes fails to answer call properly.
Hi 2U all,
I have just purchased a BT200 off Ebay, the number on the boom is 20B. No problems works well , no rebonding problems. Just one wish, it would work with voice. But I will keep praying!
StayLucky Jim :wink:
EMAIL FROM JABRA RE-Bonding Problems with XDA-II
:roll: :roll:
Dear Ian,
Thank you for your e-mail and please accept our apologies for the delay in reply.
We are sorry to hear you are experiencing problems using your JABRA BT200 headset in conjunction with your O2 XDA II.
However, having tested the JABRA BT200 headset with the XDA II, we have encountered the following problems.
When completed charging the headset you will need to synchronise the Headset and the Audio Gateway in your XDA II.
Please follow the steps below:
Select Bluetooth menu> Select Off> Select OK (BT is now disconnected)
Return to desktop (Today view)> Disable BT HS mode> Enable BT HS mode (User
to be prompted to turn On BT radio)>Select OK
Enter BT menu> Select On> Select OK (The XDA II returns to the "Today" view
and will try to synchronise with the HS again.
Check connection by establishing an outgoing call. If no sync - you will need
to re-pair the two devices)
We hope this will solve your problem for you. If you require any further assistance please do not hesitate to contact us again.
Thank you for contacting JABRA Customer Service, Europe
Camilla Vang
Customer Service Representative
GN Netcom, Mobile Division (Copenhagen, Denmark)
Click to expand...
Click to collapse
Seems to me that without actually saying it, JABRA think that the fault lies with the XDA-II!
Regards
Ian Goulding
question?? does the bt200 2.5 work with the imate and a i95c at the same time??
i have two devises an I95cl for nextel not blue tooth and the imate pc phone. i would like if possible to use one headset ?? the bt 2002.5 says it will work for bt phones also?? but will it work at the same time ?? hope iam clear...iam a baby here can you tell
15B, can it be upgraded?
Hello everyone...
I have an MDAII and a Plantronics M3000 BT headset and I have the same pairing problem.
I always have to repair the two divices for them to work...
Any ideas?
Best regards,
Rayan
I have tried searching the forums and can't find much Info.
Is anybody here using the above system for telephony & GPS; If so how do they intergrate/do they work well on the XDA II (I have ROM Version 1.72 with Radio1.17)
I Know about the headset profile probs not giving full functionality of the Handsfree use of the car kit but this doesn't bother me to much as long as I can Make and receive calls.
Thanks in anticipation!
I was going to get a CK3100, but heard so many problems regarding build quality, and lack of support, I got a HCB 30 instead.
It did not help when I tried to e-mail parrot for advice and 3 different e-mail adresses bounced back.
Works Perfect!
Just had the CK3300 installed today and it works perfectly - I Knew some of the functions didn't work because the XDA2 only supports headset profile but once you have transferred your contacts to the kit via bluetooth it works well.
Also the GPS works well with CoPilot 5 live; it picked up the signal straight away ; well pleased with this set up!!
same to me have the ck3300 tested with qtek2020 - works fine. problems with 9090 but after bluetooth update now it works fine. No tests with S100 at this time.
tested GPS with destinator 3 and map&guide fleet navigator and mobileobjects fleet management system.
don't use bluetooth tools after Rom 1.66 :!: CK3x00 didn't work aber installation of this
Set up
Just had the CK3300 installed today and it works perfectly - I Knew some of the functions didn't work because the XDA2 only supports headset profile but once you have transferred your contacts to the kit via bluetooth it works well.
Also the GPS works well with CoPilot 5 live; it picked up the signal straight away ; well pleased with this set up!!
Click to expand...
Click to collapse
Any tips on setting up the CK3300 with my XDA2?
Just had the car kit fitted - i need both nav and handsfree functions - but i am not sure that i have got the phone and ck3300 to bond properly. So everything is 'greyed out' on the parrot.
Using ROM 1.72.00WWE (1.72.181) and radio 1.17.00
Thanks for any help received.
If everything is greyed out then it isn't bonded properly!
Step 1
Delete the pairings you have from XDA2 and car Kit;
Step 2
On the car kit turn the control knob untill settings appear- then scroll to 'Advanced Settings' - 'pairing a telephone' - 'windows CE device'
Step 3
Now search for devices using your XDA2 and the car kit should be shown.
Step 4
Enter passcode 1234 and accept headset and serial profiles when shown.
PAIRING COMPLETE
to access your phonebook you need to transfere the contacts via bluetooth to the car kit.
Hope this helps
XDA2 CK3300
Managed to get the GPS set up (fiddling with COM ports - even imbeciles strike lucky sometimes)
Some items are now in black. However, I am not sure that I have done it right as I cannot get it to use my phone to make calls or receive them. Which is exactly why I bought it in the first place.
So, please (please please) can you tell me how to exchange my phonebook?
I am going to sit in the car right now and have a go at your bonding advice...maybe all will become clear (but that is not often my experience!)
Thanks again for your help.
You need to bond the phones in the manner I described or it will not work ; this is clearly ststed in the Parrot instructions and on their website.
(I have noticed a strong correlation between people who do not read instructions and complain things do not work!!) - Joke
You also need to make sure your headset profile is active on the XDA 2 for it to work. Again reading the instructions for the phonebook - you tap and hold a contact on the XDA2 and select 'beam contact' - 'via bluetooth' the bluetooth search then comes up and the car kit will be found you then 'tap to send'
Now i have the opposite problem!
Believe it or not, I have now got the XDA2 and the CK3300 bonding automatically so I can make and receive calls whilst driving. It works pretty well (occasionally makes an awful noise, but only occasionally). I am impressed.
However, once I had done that, the GPS is undetectable. I have tried all sorts of combinations. I have checked the instructions - and selected the long code (ends in 9600) but I am not certain that I am using the right com port. I have tried most of them without success.
Oddly, this is the one thing that WAS working before I got the car kit to work (for calls). Somehow, either I have lost the right settings OR the XDA2 won't do both (although I read somewhere that it would) OR my ROM needs updating (uh?)
Please help.
BTW, I am due a phone upgrade - I love the xda2 but would consider getting another phone if necessary, if anyone can recommend one that is fully CK3300 and TomTom compatible.
I don't use Tom Tom myself but from reading these forums I think you need to install the patch on their website to allow Tom Tom to use the correct Port .
Your Car Kit also needs it's software updating if it makes a noise like you say. On the Car Kit go to > settings-advanced settings-information and you will find the software version (sounds like 4.03) if it makes a noise. The latest on the Parrot website is 4.10b and this will fix the noise issue.
If you need help installing this let me know.
The best Phone is surprisingly the Old Fashioned Nokia 6310i - it has a good bluetooth stack and uses the handsfree profile rather than the headset so contacts sync automatically but if you require live traffic info best stick with what you got as the Nokia will not pair with the XDAII and the car kit at same time.
Which COM port?
For the moment, I have a temporary solution.
However, I have updated the TomTom Navigator software and the GPS, but still don't know which port the GPS in the CK3300 should be connected to.
Any ideas?
And, thanks Nikpro for the excellent help so far - you are a true altruist and a star!
The outbound port on the xdaII is port 5 by default
On XDAII go to Settings - System tab - Bluetooth settings and make sure you check the tick box for outbound COM port.
There is also a chance you have deleted your serial port profile so tap on the bluetooth icon in the Today Screen and go to bonded devices. Select the CK3300 and delete partnership (do not delete pairing from car kit end!)
Then search for new devices from the XDAII and the CK3300 will again come up; create a new partenship and everything should be good.
Still having problems
Oddly, I still cannot use the GPS on the CK3300.
I am using my old TomTom at the moment for GPS and the CK3300 for headset - which works fine, but I wanted the CK3300 to do both.
When I try and reset the GPS to the (series of numbers ending in 9600) as stated in the info and the instructions (Nikpro, take note - I have read them - but your comment made me laugh), the TomTom just 'freezes'. Wait - and wait - and wait - and when it reincarnates itself, no GPS at all.
I am using the 1.72.00WWE rom and radio 1.17.00
I think that I have tried every permutation for the COM port.
Has anyone any ideas? Please?
When you initially pair your XDA to the car kit do you get a message about serial connection show on the screen? The problem must be with the tom tom software as with copilot and mapopolis it works fine? or the way you are pairing the two!
What software version is the car kit? PLEASE DESCRIBE HOW YOU ARE PAIRING THE DEVICES??
Hi all, 1st post and all that.
Have you tried falshing the parrot with the newest rom, mine picked up enough to make and recieve call, but i flashed my xdaII with 2.02.T1WWE this morning and it works even better.
Hope you get a result
nikpro said:
I don't use Tom Tom myself but from reading these forums I think you need to install the patch on their website to allow Tom Tom to use the correct Port .
Your Car Kit also needs it's software updating if it makes a noise like you say. On the Car Kit go to > settings-advanced settings-information and you will find the software version (sounds like 4.03) if it makes a noise. The latest on the Parrot website is 4.10b and this will fix the noise issue.
If you need help installing this let me know.
The best Phone is surprisingly the Old Fashioned Nokia 6310i - it has a good bluetooth stack and uses the handsfree profile rather than the headset so contacts sync automatically but if you require live traffic info best stick with what you got as the Nokia will not pair with the XDAII and the car kit at same time.
Click to expand...
Click to collapse
Use Bluetooth tools www.bluetooth.jazztel.es
and edit the registry under hkey local machine, builtin, BTIBserial, rename BTIBserial.dll into BTIOBserial.dll
and go Start, Settings, System, Bluetooth settings and check both inbound and outbound.
Delete ALL paired devices, reboot, and re pair them.
You will now have an option for two serial ports, one for each device.
This is the only way to do it if you have two devices that need a serial port. If you have a third, you are SOL.
Normally, the stupid programmers who made the MS BT program, made it so it only had one dynamic port for BT. Some people would experience having to reboot before switching BT devices, most would have to re pair every dam time.
The new 2005 does not have this problem but it has other bugs.
They smart people at MS changed the databases so Mapopolis and other third party programs can not read the contacts or have other bugs with them. Plus the 2005 version here limits your memory.
The 2.02 - 2.06 will NOT work with Hands Free and most car kits need it and if you have caller ID via BT, you are SOL too.
The 2.20 is a stable and a good OS and the Hands free works much better. The down side is, when I get a call on the call waiting, even if I did not answer, it would disconnect the BT headset and no sound through the phone too. I would have to, click on Tools, Hands Free off, tools Hands
Free on before it would work. I have lost many clients this way.
I decided to disable call waiting in the phone settings and it only has a few bugs now like I have to turn off and then back on the BT headset after ever call or it would revert to Headset mode.
The caller ID will not display if the call is in the history of my BT headset or if it is in my contacts database.
I mention my BT headset because it is like a car system when used in Hands free mode.
Good luck, let me know if you have any trouble now.
Parrot 3100 with XDA II
Hello,
I have just put in a Parrot 3100 and it works fine as a handsfree phone.
is there any way when I am not in the car though to use my Jabra 250v headset without rebonding and selecting it as the preferred headset device?
I can't seem to switch between the Parrot and the Jabra when the other one is not in use without repairing.
Thanks for any advice
BT
Try turning of one and turning on the other and soft reset..
Ok, I have just spent my entire weekend trying to get my Qtek 9090 to communicate to my newly installed Parrot CK3300 (with GPS). I have read the manual about 3 times from beginning to end, know the whole website parrot.biz by hard (ugly site BTW), and have tried about everything in configuring, but with no success so far.
Initially I had the 2 devices paired to each other, but after I installed Tom Tom 3, it is impossible for me to get them to pair again. Nevertheless, the 2 devices "see" each other (when asked in "Linked devices"), but they can not get to communicate. From all the stuff I have read on forums and sites, it seems that I need to upgrade my Bluetooth version, but I have no idea how and where to start this procedure.
Can anyone help me out here ?
Any tips are welcome !
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi There,
I have a HTC Cruise (dutch) and a Parrot 3200 LS-Color bluetooth carkit.
My carkit sees my HTC and I can sync my address book but when I receive a call ore when I want to call it doesn’t work right. I have to put the telephone to my ear again. The speakers en mic in my car don’t work.
Can any one help?
Thanks,
marco
update your carkit
Are you sure that you are on the best firmware for your car kit?
I have a diffrent parrot car kit (mk6000), and all my pb was solved by: going to the last parrot firmware, and after updating my phone to WM6.1 (not sure that this second is necessary or not)
Houms
I have a Parrot CK 3100
Version 4.16
I have also HTC TC with WM6 original
Every think work fine
You can try the jetware bluetooth extension.
http://www.jetwaremobile.com/
It solved some problems with my parrot ck300 evolution.
\\Yoshi
My Parrot works fine with Polaris
Parrot 3100 working fine with Polaris here too.
I had posted my experiences with the new firmware update here:
http://www.parrot.com/forums/usa/viewtopic.php?id=1487
Hope that this helps
T
imo the parrot with the color screen is a waist of money, ck3100 is also more supported ! My polaris works flawlessy with my ck3100.
My Polaris works near fine with the CK3100, except the disturbing phantom call when your last call was not picked up...
The other minor problem is that the different numbers of one contact are shown separated (/H /W /M...) Does anybody know if it possible to show all together?
Parrot have a 4.17 update out.Try flashing your ck3100.
Canaan said:
Parrot have a 4.17 update out.Try flashing your ck3100.
Click to expand...
Click to collapse
Already flashed, but no changes.
grouchomrx said:
My Polaris works near fine with the CK3100, except the disturbing phantom call when your last call was not picked up...
The other minor problem is that the different numbers of one contact are shown separated (/H /W /M...) Does anybody know if it possible to show all together?
Click to expand...
Click to collapse
There is a prog on Parrot's website the creates a vCard of all your contacts in outlook this file is then sent to the CK3100 from your phone and all of you contacts are saved in the bluetooth kit.
I don't think the phone auto syncs these contacts though
JJ
Hi Guys,
I don't want to be rude, but the thread starter asks for a solution to his problem not a list of parrots which do work with the touch cruise. Not really helpful according to me :s.
Futhermore, I am also having a lot of problems with the Touch Cruise with the Parrot 3200LS Color. I installed the jetware bluetooth extension, which solved 99% of my problems.
The 1% left is disconnecting a phone call. If I push the red button on the Parrot device, the call is not disconnected. I have to push the red button on my phone to end the call, but still the 3200LS thinks the call is still going on. I have to pull the plug to reset the 3200 LS. I already flashed the parrot with the latest firmware.
Anyone any useful pointers?
Parrot and TC
Hi there!
I don't know about you guys, but for me it's simple, for HTC touch, and for TC with my parrot CK v3.13 here's what i do:
- to be shore, you reset your parrot (red + green buttons, then you hear "please pair device", and only with first pairing),
- turn on your TC's BT, go to settings/BT, Add new device (Mode - visible), and when parrot asks for code, it's 1234, as i recall.
- now you are paired, and when you enter in your car only thing you have to do is to turn on TC's BT, pairing will be authomatic.
this works for me, without any problems...
Hope this helps
Bye
Problems with the HTC and the Parrot sync.
I have an HTC polaris but I cant sync with the Parrot 3100, because allways says that the code or the connection fail. anyone can Help me to sync this 2 ???
Thanks
Portugal HTC user!!!
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
UPDATE 2010/03/29
a half solution is to start the car, then turn the BT on the phone, then it works perfect.
the reason why his is a HALF solution only: next time you start the car you have to start BT on the phone again ( I am used to have my BT working 24/7 )
a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
You could always buy a more expensive phone to go with that expensive accessory
Only joking
a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
Not BMW, but I have it working perfectly paired with my Ford car system. So I'd suspect is most likely a settings isue one side or the other rather than anything fundamental.
well I have noticed that it works well with newer idrive models, but mine is 2005 MY so no idrive and no luck
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
souljaboy said:
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
Click to expand...
Click to collapse
or no, the phone book is excellent
it is not being able to call or receive calls what bothers me
and as I said, it works with newer iDrive BMW
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
souljaboy said:
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
Click to expand...
Click to collapse
Yes, I have tried 2 bmw forums, but they do not know about WM 6.5 much
this is my first WM phone, all the other phones worked in the same car.
I managed now to get sms to show on the screen of the car, but calls is more important
people here in HD2 forum said they exange some big (5-6 digits) number in the registry and it works for them, but I am pesimistic about this because they have different BT stack, right?
HD2 - widcomm
TG01 - MS
well it never hurts to try , just make sure u can undo it .. tho if the regkey contains "htc" somwhere it most def wont work
I have downloaded a utility for enabling rSAP profile on our phone - it did not help...I then disabled the rSAP and a miracle!!!
I managed to place 2 calls already. I hope on next connection with the car it will still work
what is this miracle program which lets you enable the rSAP? I need it too!!
youbrokeit said:
what is this miracle program which lets you enable the rSAP? I need it too!!
Click to expand...
Click to collapse
search this forum "rSAP"...but before you do a short update:
of course on next connection, nothing worked ...and I have updated to the new rom and did not install rSAP and I was able to obtain the same result...this means it has nothing to do with my previous success
this situation is driving me grazy already...I do not know why sometimes i can get it to work perfectly by just switching BT on and off.
today i have wasted many hours just turning it on and off trying to find the rule, working combination - so far it seems to work at random
and if I get it to work it works for the next call and the next...until I get out of the car. when I start the car again it does not work r-r-r...how can I take a "snapshot" of the phones state when it is working and somehow replicate this state every other time I am in the car?!!
please help me
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
souljaboy said:
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
Click to expand...
Click to collapse
a SR does indeed fix it, but only until next disconnect...when I came to the next day it is the same story again
I refuse to believe that this just a normal thing for WM (although having for the last couple of years only blackberries, I miss their stability and auto on/off function) ...even WM cannot be THAT glitchy
anyone?
I think I am onto something here:
if the BT is switched on after I start the car, everything works perfect!
the only inconvinience now is switching BT on/off for each jorney (especially annoying during short trips with short stops - to the local shop, post office etc)