I have an XDA II with a Logitech Mobile Bluetooth Headset for the last 7 months.
I've just returned one of these headsets as faulty because I kept losing 85% volume in the ear pierce ocassionally when I received an incomming call. I then bought another one and guess what? same problem, so the fault has to be with the XDA phone itself. The problem is I only seem to get this problem with incoming calls, can't remember getting this problem when making a call. When the volume drops I can just about hear the caller but its extremely faint.
The only other Bluetooth device I use is my TomTom navigation unit and although I have had some problems with both devices working together I'm not getting regular problems, just things like the TomTom can't alway connect to the sat box or my headset doesn't always work when the phone rings.
Anyone else had this problem and more importantly the solution???
Thanks
Paul.
I had that problem and I was advised to turn off device, remove battery for 20 secs or so (ensure backup fully charged!!!) and then reinstall battery, reset device (soft) then finally re-install headset ans establish new BT pairing to headset.
fiddly but it did work
good luck
Pete
I did that as advised by Logitech but the problem still occurrs on occassions. Is it a problem with headset or XDA?
Hi all, i have a problem after upgrade my SPV C600 from WM5 to WM6.
after finish the upgrading, i could play my windows media player and could make a phone call without any problem.
after a while after i plug in my earpice to listen music, it went good as well.
after plug it off (earpiece not attached), when i play windows media player, i cant hear anything and i try to make a phone call also the same, no sounds came out from speaker and from loudspeaker as well. but when i plug in the earpice everything goes smoothly, meaning that i can listen music and communicate with others when make a phone call.
before that i tried to ensure whether i face the software or hardware problem by setting the ringtone (start->setting->sound). but the sound could come out from the speaker.
after that i guess that the speaker (hardware) has no problem.
as to play windows media player and setting ringtone are using the same speaker.
can anyone tell me whats happening with my phone?
i believe that it is software related problem.
thanks in advance
my advise is to reboot your phone at me this works...
Profy_X said:
my advise is to reboot your phone at me this works...
Click to expand...
Click to collapse
i have tried to reboot and hard reset as well
but i can only listen music and make a phone call when i use my earpice
Please state which ROM you are using, we recommend Andot's PEE
I too have this exact problem any solution other than hard reset - dont need the pain of downloading resinstalling all my stuff - especially if its going to happen again.
Si
Tornado mic and speaker for phone not working
It rings and plays sounds but it appears that the hardware microswitch that sets it to wired-headset mode is stuck. I cannot set it back. Also: it switched into this mode when I rebooted (soft). I did not add or remove a 2.5mm jack. Is there a registry setting to override the microswitch sensor and keep it out of headset mode?
Hi, this is my first post and hope helpfull everybody, possibly i was the same problem over ALL ROM (wm6 & wm6.1), searching for any solution (my specific trouble was that if i wanna listen music over any player: ( a.k.a windows media, pocket player, etc), i dont had a normal sound from the speaker, the sound was distorsioned, low... horrible, the only solution was insert the plug from the headset and out , but, power off the phone and... again, sucks really ), i return to a Wm5 Rom (imate) and solve the problem, but, tired for the slow performance of WM5, search for other rom, sacrify the music listen ( but i have a good mp3 player...), and, the same problem.
I found in the web (no remember the page) that the SRS plug-in anytimes cause troubles with the sound output, i try to install any ROM WITHOUT this complement, the ROM from Rickywatt Tornado Neo/shadow no have this plugin, install and ...Eureka, no more the issue, follow my instint, i install the SRS plug in, reboot and... the fuc%$& problem, hard reset and the phone witout the problem... conclusion, the SRS was the monster.
You can try this "method", most of rom carry or include from the "kitchen" this SRS dll, but installing the rom from Rickywatt (fast, clean... beautiful, only without the spanish lang, but, nothing is perfect...), can solve the issue, for me ,cors, i dont know for you (my phone is a HTC sda).
For the mic, really i dont have idea , any bad registry, entry, etc :-(, i never have this issue, good luck...
Greetings from colombia (sorry for my poor English)
mzzw said:
It rings and plays sounds but it appears that the hardware microswitch that sets it to wired-headset mode is stuck. I cannot set it back. Also: it switched into this mode when I rebooted (soft). I did not add or remove a 2.5mm jack. Is there a registry setting to override the micro switch sensor and keep it out of headset mode?
Click to expand...
Click to collapse
That's not controlled by software. Try plugging and unplugging a headset several times, twisting it around to clean the contacts. It should clean and close contact for built in speaker to work again. Think of a circuit. If its closed, you have built in speaker. If it opens and you have a headset pluged in, then audio flows thru the headset. It won't go back to speaker until that circuit is closed again. Its mecanical, not software, so you can't do anything with registry.
mzzw said:
It rings and plays sounds but it appears that the hardware microswitch that sets it to wired-headset mode is stuck. I cannot set it back. Also: it switched into this mode when I rebooted (soft). I did not add or remove a 2.5mm jack. Is there a registry setting to override the microswitch sensor and keep it out of headset mode?
Click to expand...
Click to collapse
the same for me
well
the only fix i got was to disasemble and remove the swithch leaving its contacts as exposed as possible, the soldered a wire between 2 of the 3 connectors, hey presto all working, headset hole then filled with glue from glue gun
very rough but it worked....
as an after thought though see if youve updated your radio software, stranger things have happened if youve been into flashing with 3rd party roms
sisniper said:
well
the only fix i got was to disasemble and remove the swithch leaving its contacts as exposed as possible, the soldered a wire between 2 of the 3 connectors, hey presto all working, headset hole then filled with glue from glue gun
very rough but it worked....
as an after thought though see if youve updated your radio software, stranger things have happened if youve been into flashing with 3rd party roms
Click to expand...
Click to collapse
Thank you!!! The only problem that i've now it's buy a torch :S
Hi guys new to the forum and this world ... I wanted to present my problem for about a month I own a samsung mini galaxy the only problem is driving me crazy is that the bluetooth and I can not connect my bt headset (Nokia BH-102) ... I'll explain:
Just turn on the search bt do find it, I can make the association work for a while and then disconnects without reconnect because it is as if the bt went out when being turned on I tried everything I also updated the JPF but still nothing to me this joke ... Help me !!!!!
NB I tried with headset samsung and other mobile phone without results ...
A greetings to all
try a different headset to test if it the phone or not, like a plantronics or motorola (borrow a friend's) if it connects then it is a compatavility issue with your headset
the problem is that the Bluetooth works only for a short time and then stops working and as if by itself ... short turns off by itself
I am hoping somebody would help solve my problem. I have a Calypso SP bluetooth headphone. My phone shows it's connected to the device but the sound from music player still come out from the main speaker.When i got the sound to the headphone, there's this crackling sound coming out. I have tried pairing and unpairing the device a few times, but the results are still the same. It doesn't have any problem when paired with my galaxy s.
same problem here i would also like to know if there is a fix.
What ROM are you using?
IGNORE - misread your question, sorry. Many people experience poor A2DP audio quality on the Sensation. Some headsets seem to sound okay, others don't, even though they may be fine when used with other devices. Search and you'll find some info in various threads. More recent ROMs have solved or reduced the problem for some people.
Just a quick check, are you paired to your device for both phone and media audio?
To check, if you're using Gingerbread, go into Bluetooth Settings (settings/wireless and networks), then press and hold on the device you are connected to and select 'options' in the menu that pops up. This will take you to another menu where you can check which features you are connected to. Sometimes mine only connects to 'phone audio' on my headset and I have to re-enable media audio.
Thanks for the reply. My phone is on stock firmware. This problem only happened recently. Before this i never encounter this problem. I found another problem where the volume control doesn't work when I'm using bluetooth. The same problem also occurs when i use the original earphone where the volume control detects bluetooth device even when it's not paired. I tried resetting my phone earlier and the problem is still there. Maybe i'll take it to the service center and have it fixed.
Fixed, with some sacrifice..
After fiddling around the whole night, i tried to do the restore factory setting from the recovery mode. Somehow it fixed the problem. So it might be some software or an app bug that caused the problem. Now to do a some serious apps downloading and setup.
Hi you all, I have a non common bluetooth problem. My S6 is running Xtrestolite with android 6.0. My phone can connect BT to my cars, my earset and my soundbar to play music and it work well even on my earset. BUT, nothing for voice call, the call connect and silence for everyone. There is no voice at all, but BT is connected, and all infos on my cars radio like timer, mute and others work well ( okay mute cannot be more muted ). So I tried 1/8 headset for music it works, did not try yet one with a mic, but I'll do it ASAP. I tried to reprogram with odin default OS, with factory settings, and that way force all components to be re-write ( Bootloader, Radio , etc ), issue still present !!! Try to clean micro usb connector, nothing !! Try to clean audio jack, but wasn't really sure if it was well cleaned.
Do anybody here have an idea of what I could try, test or do to eliminates possibilities ??
I am thinking that maybe some corosion could be in the audiojack, somewhere and let the phone think that there is an audio jack connected, and then sent the voice to it...but how it could be tested before to try to open the phone to clean it properly and risk to damaged the LCD ???
Thank a lot for all of your advices