I am hoping somebody would help solve my problem. I have a Calypso SP bluetooth headphone. My phone shows it's connected to the device but the sound from music player still come out from the main speaker.When i got the sound to the headphone, there's this crackling sound coming out. I have tried pairing and unpairing the device a few times, but the results are still the same. It doesn't have any problem when paired with my galaxy s.
same problem here i would also like to know if there is a fix.
What ROM are you using?
IGNORE - misread your question, sorry. Many people experience poor A2DP audio quality on the Sensation. Some headsets seem to sound okay, others don't, even though they may be fine when used with other devices. Search and you'll find some info in various threads. More recent ROMs have solved or reduced the problem for some people.
Just a quick check, are you paired to your device for both phone and media audio?
To check, if you're using Gingerbread, go into Bluetooth Settings (settings/wireless and networks), then press and hold on the device you are connected to and select 'options' in the menu that pops up. This will take you to another menu where you can check which features you are connected to. Sometimes mine only connects to 'phone audio' on my headset and I have to re-enable media audio.
Thanks for the reply. My phone is on stock firmware. This problem only happened recently. Before this i never encounter this problem. I found another problem where the volume control doesn't work when I'm using bluetooth. The same problem also occurs when i use the original earphone where the volume control detects bluetooth device even when it's not paired. I tried resetting my phone earlier and the problem is still there. Maybe i'll take it to the service center and have it fixed.
Fixed, with some sacrifice..
After fiddling around the whole night, i tried to do the restore factory setting from the recovery mode. Somehow it fixed the problem. So it might be some software or an app bug that caused the problem. Now to do a some serious apps downloading and setup.
Related
Anyone else seeing some odd behavior with bluetooth pairings? I keep on having to re-pair with my laptop (Win 7 64x) and my car (Audi S4). Complete pain.
I use it with my computer (Win 7 32-bit) and my Motorola bluetooth headset, no problems since I first paired each (sometime in July).
I have the same issue at times....quite frustrating and I have found no way to stop it from happening....
Yep. I get this too. My only fix has been to turn off my plantronics earpiece and when turned back on it connects.
Sent from my SAMSUNG-SGH-I897 using XDA App
It used to work fine for me with stock build. Now on JH3 I have the issue...
TheSopranos16 said:
It used to work fine for me with stock build. Now on JH3 I have the issue...
Click to expand...
Click to collapse
I am JH3 as well, FWIW. Dunno if JF6 gave me the same problem. I now have 3 of the same device in my Win7 BT folder. I also remember seeing the BT settings reverting to old ones.
Problem I keep on having is that the media profile, or A2DP, setting won't enable when I turn on my stereo bluetooth headset. It'll sometimes reestablish the media profile if I keep on turning off and on the bluetooth setting on the phone and headset, but most of the time I just end up having to re-pair my it. Would be awesome to know if anyone knew how to fix this.
Sent from my SAMSUNG-SGH-I897 using XDA App
ianwood said:
I am JH3 as well, FWIW. Dunno if JF6 gave me the same problem. I now have 3 of the same device in my Win7 BT folder. I also remember seeing the BT settings reverting to old ones.
Click to expand...
Click to collapse
I suppose I should just throw in there...I never had the problem with JF6. I'm running JH7 now and still have not experienced it, will report if I notice anything.
More Info
While I don't have a solution, I have researched this problem a bit.
In my experience the problem happens when I disable the phone capability of a device.
For instance, I have a pair of stereo bluetooth headphones that I can make calls with, as well as listen to music and other audio.
If I edit the profile and disable the phone function, the whole device disappears from my phone if I reboot it. If I leave the phone option enabled, it does not disappear.
Disabling the media option does not appear to have any affect as long as the phone option remains active.
My rom is stock.
The pairings don't disappear, but my motorrokr s9-hd disconnects and I have to restart the player and then press the headsets connect button. Just hitting the connect button only activates the display, but doesn't start the player. The way the headset connects just isn't right.
There are things like the headset disconnects and the browser crashing, that sometimes don't happen for days and then will happen repeatedly in minutes.
I do hope that froyo fixes some of these problems...
I have some similar problems. I have a Spracht AURA Mobile BT Speakerphone in my car and I don't use it that often but when I turn it on it doesn't seem to keep the pairing every time. It worked fine with my TouchPro on WinMo.
Another strange thing is that when it is working and I turn off the BT on the phone then come back in the car and turn it on again and it pairs, it immediately starts redialing the last number I called. VERY annoying. Fortunately I've caught it every time but I don't know why it would do that.
Whenever I connect my phone by Bluetooth to my car's stereo, only the front speakers work, nothing from the 2 rear speakers. I've tried adjusting the fade and checking settings in poweramp but still nothing. I'm not sure if this would be an issue with my phone, the ROM, or the car audio system. I'm thinking it's an issue with the car's audio but I figured I'd ask here in case somebody else has had the same issue. I am on liquid smooth 3.0 April 24th build with elemental x kernel but I had the same issue with my galaxy s4
Sent from my Nexus 5 using XDA Premium 4 mobile app
Audio !!
Digital_Fidelity said:
Whenever I connect my phone by Bluetooth to my car's stereo, only the front speakers work, nothing from the 2 rear speakers. I've tried adjusting the fade and checking settings in poweramp but still nothing. I'm not sure if this would be an issue with my phone, the ROM, or the car audio system. I'm thinking it's an issue with the car's audio but I figured I'd ask here in case somebody else has had the same issue. I am on liquid smooth 3.0 April 24th build with elemental x kernel but I had the same issue with my galaxy s4
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have no problem with nexus 5 and my car Bluetooth connectivity.
Make sure that your audio system, GPS and make and model are compatible with the bluetooth from the phone. Some other connectivity issues are that the car kit cannot decode the Bluetooth device that it is trying to connect. This decode means that the system cannot recognize the name. This is a frequent problem when devices have been upgraded. While your system may have worked fine before, upgrades can cause problems because the compatibility all of a sudden changes. This is an issue that has not really been addressed by the manufacturers.
Another frequent problem that can occur is that the Bluetooth will connect but then it will not stay connected and only one speaker is running,. Many times this can be a hardware issue.
So the bluetooth device can connect but it does not work properly. In this case there is an issue with the stereo connection to the Bluetooth unit. There is nothing actually wrong with the bluetooth or devices but this is a software issue. To fix it see if the manufacturer is offering any updates. If one person has had the issue then you can bet that many people will have the problem. This is a problem with the car kit software as no matter which phone or earpiece you use the audio will not play from the speakers. Check that the vehicle supports bluetooth audio as some only will support bluetooth phone calls. These are 2 very different things.
Most of the time, look into the settings for the bluetooth and the car system. If the car battery should die then the system may reset to the defaults. This means that all of the current settings will be lost and need to be reset. Not only will you need to check the settings in the car system but also in your phone or other bluetooth device. In order to correct the bluetooth settings the device will need to be connected to the computer.
joannn said:
I have no problem with nexus 5 and my car Bluetooth connectivity.
Make sure that your audio system, GPS and make and model are compatible with the bluetooth from the phone. Some other connectivity issues are that the car kit cannot decode the Bluetooth device that it is trying to connect. This decode means that the system cannot recognize the name. This is a frequent problem when devices have been upgraded. While your system may have worked fine before, upgrades can cause problems because the compatibility all of a sudden changes. This is an issue that has not really been addressed by the manufacturers.
Another frequent problem that can occur is that the Bluetooth will connect but then it will not stay connected and only one speaker is running,. Many times this can be a hardware issue.
So the bluetooth device can connect but it does not work properly. In this case there is an issue with the stereo connection to the Bluetooth unit. There is nothing actually wrong with the bluetooth or devices but this is a software issue. To fix it see if the manufacturer is offering any updates. If one person has had the issue then you can bet that many people will have the problem. This is a problem with the car kit software as no matter which phone or earpiece you use the audio will not play from the speakers. Check that the vehicle supports bluetooth audio as some only will support bluetooth phone calls. These are 2 very different things.
Most of the time, look into the settings for the bluetooth and the car system. If the car battery should die then the system may reset to the defaults. This means that all of the current settings will be lost and need to be reset. Not only will you need to check the settings in the car system but also in your phone or other bluetooth device. In order to correct the bluetooth settings the device will need to be connected to the computer.
Click to expand...
Click to collapse
I have an aftermarket Kenwood double DIN deck with Bluetooth 2.1. It connects perfectly fine, shows up with Nexus 5 when pairing, shows the song title, shows the name of the person calling... It works great when plugged in through the aux port, but of course doesn't show me any information that way. When I had the S4 it showed up as SGH-M919. It stays connected just fine and I had it playing for a while before I tried turning up the volume and noticed it didn't sound right and figured out the rear speakers weren't playing.
I just checked and noticed there is a somewhat recent update on Kenwood's site but it was still about 3 weeks before I bought the deck... I'll try doing that though. (edit) just checked again and the update isn't for my model, there's no software for it
Thank you for answering since I'm pretty sure now that it's a problem with the stereo and nothing to do with Android lol
Kind of embarrassed to admit it but...I did have Car Toys install it so... they probably didn't do a very great job. I knew I should have had either Best Buy do it or tracked down a friend that could do it. Oh well
Hello there.
Since updating to MM I have the following issue on my Z5: When inserting headphones or an aux cable, the phone switches back and forth between headphones and speaker for a couple of seconds, before finally settling on headphones and playing as it should. This is a problem because I have a Tasker task that relies on headphone detection and now it doesn't work properly.
I had the issue with the small apps after upgrading, so I already did a system reset, which solved the small apps issue, but not the headphones issue.
Already tried disabling SmartConnect and booting in SafeMode. No luck.
There is apparently another person with this issue on the Sony forums, so I'm not the only one.
Anyone know a solution?
Cheers,
Alex
I have the same issue, but only with the aux cable. When I connect my earphone, everything seems to be fine. So I think maybe the phone has some issue with one particular model of aux input? because there are several type of aux plug now.
AlexBardosch said:
Hello there.
Since updating to MM I have the following issue on my Z5: When inserting headphones or an aux cable, the phone switches back and forth between headphones and speaker for a couple of seconds, before finally settling on headphones and playing as it should. This is a problem because I have a Tasker task that relies on headphone detection and now it doesn't work properly.
I had the issue with the small apps after upgrading, so I already did a system reset, which solved the small apps issue, but not the headphones issue.
Already tried disabling SmartConnect and booting in SafeMode. No luck.
There is apparently another person with this issue on the Sony forums, so I'm not the only one.
Anyone know a solution?
Cheers,
Alex
Click to expand...
Click to collapse
im still on lollipop but i had the same issue a couple times were i have headphones plugged in and the speaker would be playing music at the sametime too. kinda wierd so i just restarted my phone and it was fine after that.
xperia z3 said:
im still on lollipop but i had the same issue a couple times were i have headphones plugged in and the speaker would be playing music at the sametime too. kinda wierd so i just restarted my phone and it was fine after that.
Click to expand...
Click to collapse
I have had this problem with other Z series phones but not the Z5 yet.
As reported above my phone when I plug just headphones stereo only (two contact plug) into the phone gives me an ear icon for headphone optimisation and with an automatic headphones actions.
If I plug a headset in (three contact plug) I get additional headset options, plus automatic headset actions.
My guess is you have a conflict with the Sony built in functionality and the Takser task you mention.
@xperia z3 I have only had this happen previously if my headphone hadn't fully located in the headphones jack
So, how can this be fixed?
GeramanX said:
So, how can this be fixed?
Click to expand...
Click to collapse
my guess would be try to disable any apps trying to hijack the sonys built in process and see if that fixes the issue
danw_oz said:
my guess would be try to disable any apps trying to hijack the sonys built in process and see if that fixes the issue
Click to expand...
Click to collapse
I have done a system repair through PC Companion and the problem is still there, on a fresh setup, with no 3rd party apps. I'll wait a while to see if there's an update that might fix this, if not I'll have to send the phone in. Luckily I bought it in late December, so I have still time to use my warranty.
Edit: Oh, and the issue with the small apps is still there, I have found out that it's caused by active accessibility settings, in my case tasker, but others have that same problem with other apps.
i'm dealing with the same exact thing. i did a factory reset, and it still persists. at first i thought it was hardware, then i installed soundabout. when i force output through wired headset they work fine leading me to believe this is software related. really frustrating, not sure what else to do.
I used to be able to hear calls and media whilst connected to bluetooth in my car. one day it just stopped working. media still works but when i make a call or receive one, there's no audio. calls ,audio, and contacts are all checked in bluetooth settings. i've forgotten devices, rebooted, reconnecting, and nothing helps.
bluetooth connects to everything fine, but no call sound over any accessory i try. got a new car and it won't work in there either. i'm on android 7.1.2 .
searched all over and plenty of people are having these issues but none of the posts i've read solve my problem. any help would be appreciated
Hey hey, I have a 128GB pixel with the same issue. I actually opened a case with Google support today about it. about 3 months back, only phone audio stopped working in my car. I was hoping the 8.0 update would fix it but it did not. I have a 2017 Honda Civic LX. I tried everything on my phone - even factory reset. Media audio works, I can play Spotify just fine but when i get a call, I can not hear the other person and they cannot hear me. The phone indicates it is connected via bluethooth... I'll try to update this post with what they find.
marc.ientilucci said:
Hey hey, I have a 128GB pixel with the same issue. I actually opened a case with Google support today about it. about 3 months back, only phone audio stopped working in my car. I was hoping the 8.0 update would fix it but it did not. I have a 2017 Honda Civic LX. I tried everything on my phone - even factory reset. Media audio works, I can play Spotify just fine but when i get a call, I can not hear the other person and they cannot hear me. The phone indicates it is connected via bluethooth... I'll try to update this post with what they find.
Click to expand...
Click to collapse
128G pixel here. This happens with every Bluetooth device I connect it to. 2 car stereos, 2 speakers, and a headset. All worked fine and suddenly one day... Didn't. I was hoping O Would fix it with all the Bluetooth bug fixes and changes they implemented.
Sent from my Pixel using Tapatalk
Darn, so the issue is a bit different. Mine works fine on a couple of other speakers I have.
Did anyone ever solve this? I've got the same issue, but it effects *all* my Bluetooth devices, but only when I am switched to my secondary user profile.
I've reset the phone app but no dice.
My phone will say it is connected to the Bluetooth device for the phone call. If I switch to speaker or phone and then back to Bluetooth, it works. Anyone else have similar?
wormbo said:
Did anyone ever solve this? I've got the same issue, but it effects *all* my Bluetooth devices, but only when I am switched to my secondary user profile.
I've reset the phone app but no dice.
Click to expand...
Click to collapse
Hi!
After hours of Googling you are the first I found who has the same error.
I have a Lenovo TAB4 8+, my kid wants to use Zoom and his Bluetooth headset but only the speaker and mic on the tablet works. I tried fresh install, without luck:
There are 4 type of users:
- Owner (primary - this is the only profile which works for calls on bluetooth headset)
- Standard Users (secondary - bt headset only supports listening: Spotify etc..)
- Child (bt headset only supports listening: Spotify etc..)
- Guest
The bluetooth headset is working with other devices, but not with this one. Unfortunately I have no other android device which supports multi-user.
Moreover, there was an hour when bt call worked from secondary user, but couldn't find out what is the problem.
Can anybody help me on this?
Best regards,
Karoly
Anyone else finding that the Bluetooth audio can be a bit hit and miss, the audio has just fully cut out on me, but it displays as if it's still connected and playing via the headphones. I had no audio through either headphones, switching BT off and on, and rebooting headsets didn't solve it. Rebooting the phone brought the audio back, phew!
Out of the two headsets I have, My cheap Sony WI-C310's seem to work better, Using my jabra halo smart headset, it doesn't seem to connect media audio if it's also allowed to handle calls. I have to toggle calls off and just media to use Spotify with the headset (this could just be that headset being weird, think it got discontinued for not being great)
Anyone else having BT audio issues?
I've got a Huawei smart band 6 connected at the same time if that's a factor, it wasn't a problem on my original Nord though.
I have been facing the same issue for a while now, it's pretty random. There are times where it works perfectly and other times it either doesn't connect at all, or has a very weird delay, where it's fine in the beginning of say a video and gets a delay mid way through it. There are times where it only connects to one earphone, just issues all around. Also am using the oneplus buds z2, so honestly would expect it to work flawlessly with a oneplus device. The earphones work fine with other devices.
I've been getting random drop outs.
Both with connectivity with my car infotainment system and my cycle computer.
When I had my OP7Pro, never experienced anything of the sort when connected to these two same devices.
I've also tried enabling Bluetooth Gabeldorsche in the developer settings, and that didn't make a difference.
Will try changing the Bluetooth AVRCP version to see if that improves anything (currently set to the default of 1.5).
Has anyone else played with those settings and tested the impact?
Tested with 3-4 Bluetooth devices and no drop outs.
I notice that when I put the device in aereo mode the Bluetooth remain active, but in the latest days this problem doesn't happen anymore, maybe was a bug of the first fw, and after last update they have fixed?