Okay this is the first time I've used a 6.5 rom ([13/June/09] X2H'S WM6.5 Designers ROM(D.R) - [BETA2] - {Build 21812}) and the word completion was totally crazy so I went to the tab and unchecked all of the boxes. It, or something else that tries to assist me with typing, is still making me crazy. I still see it underlining words as I type them in Internet Explorer and when I hit space, it usually puts in two spaces. Sometimes it puts in spaces in the middle of words while I'm typing them. In Slick, when I hit the space bar it pauses for about one second or maybe even a little bit longer. If I type normally I get one to four more letters of the next word typed and then it pops back to the beginning of the word for the rest of it, which turns everything to gibberish unless I wait for the space to appear after each and every word I type. It's driving me totally crazy! Can someone provide an explaination for this? (Appologies for double posting, but I thought I might get more help with a fresh topic if it's a general WM6.5 issue, which it seems like it probably is)
I had the same problem previously, as i am using the same rom.. But after i hard resetted my device it started working normal again.. Try unticking the boxes in the input settings second tab.. Or even so try upgrade the rom to beta 4.. I think the problem has been fixed in this update.
Regards
Unchecking all the boxes made it screw up. It works much better with all unchecked except "Enable Auto Correct". I've been told it's a build issue so I'm going to check out 21815 but I suspect I'm going to end up using ham3r's vanilla rom (21502) so I only have the programs I use.
Hmm... for me it works great though .. have u tried reflashing.. or hardreset?
Related
i'm using a htc wizard with the tnt 5.0 rom, it's been running amazingly fast and smooth, i love it but all of the sudden in the past week, i can't really figure out why but, i reset(soft) my phone once and it sat there forever on the wm6 splash, so i pulled the battery for a few seconds, and reinserted and turned it on, it came on fine, the clock/calender is set to some random time and random day/month of 2006, and if i set the clock to correct date/time/year the hourglass type thing shows up and stays there for a while, i press end and it goes away, but the phone runs super slow, so i soft reset and then it sits there, at wm6 splash and never finished booting up even after 20 minutes, so i pull battery, and repeat, minus chanigng the clock and if i leave the date/time to 2006, it works fine, does this make any sense to anyone? how can i fix this possibly ?
Please make your text readable....
Have you tried to reflash your phone?
it makes vague sense but you need to work on your grammar a little
Reflash your phone, make sure you followed all the steps. Thats all i can recommend until you put more info in a reply
I'm going to try re-flashing it, but as far as working on my grammar, I don't see how anyone would have any problems understanding what I typed. lol. Unless of course english isn't your first language ?
Maybe the problem is so abnormal there isn't much more info I can include to make any more sense. I described exactly what the problems were.
sintax said:
but as far as working on my grammar, I don't see how anyone would have any problems understanding what I typed. lol. Unless of course english isn't your first language ?
Click to expand...
Click to collapse
Surely you Jest. There wasn't a single Period (.) in your entire first post. Apparently you realized and corrected that error in your second post. But to claim that there was nothing wrong with it was wrong.
Flash with an official ROM, that should take care of the issue
yeah it happened to me once or twice. I just reset the date.
No grammar problems. Very understandable for one single, long run-on sentence. Really this isn't Language Arts. I had NO PROBLEM understanding you.
I'd do a HARD reset before I resorted to reflashing.
Maybe you should pay a SINTAX for your lack of SYNTAX hehe
I understood because I encountered the same problem. Except I encountered it because my phone was CPU-scaled at a time I didn't know how and I had a heavy start-up program running.
So far the only solution was that I reflash to official ROM, then back to cooked ROM. And now every time I reboot my device, I'm mindful of the 3rd boot loading time.
Therefore I just believe that you have to be mindful about the stuff that's on your phone and see what contributes to a slow or non-responsive boot time. Our phone's are computers, and therefore computer's never last.
I can't understand for the life of me why some of are flaming this guy for making a run on sentence... Last time I checked this wasn't 12th grade english class, it was a forum for a bunch of WM fanatatics to gather together and create great things.... I mean come on...
And to reply to the first post, I could understand you 100% for the record.
I think you need to hard-reset your phone. Just hold the comm manager and voice button while resetting with your stylus and press the send key when it prompts you to. Simple enough.
sintax said:
i'm using a htc wizard with the tnt 5.0 rom, it's been running amazingly fast and smooth, i love it but all of the sudden in the past week, i can't really figure out why but, i reset(soft) my phone once and it sat there forever on the wm6 splash, so i pulled the battery for a few seconds, and reinserted and turned it on, it came on fine, the clock/calender is set to some random time and random day/month of 2006, and if i set the clock to correct date/time/year the hourglass type thing shows up and stays there for a while, i press end and it goes away, but the phone runs super slow, so i soft reset and then it sits there, at wm6 splash and never finished booting up even after 20 minutes, so i pull battery, and repeat, minus chanigng the clock and if i leave the date/time to 2006, it works fine, does this make any sense to anyone? how can i fix this possibly ?
Click to expand...
Click to collapse
eject your storage card before resetting, and put it back after your device started up completely...this will not always help, but it did work for me
Had my TP for just over 2 months now and when i slide out the keyboard to write a sms i start typing and nothing shows up, the curors doesn;t even more along as i type. It will only sometimes work in Notes and i used excel earlier today and had to type and the curosr moved along with each button press but wouldn;t show the text. I had to move down a row to actually see what I typed.
Thanks
Regards,
Neil
mine did the same thing
when I first got mine a few weeks ago, it did the same thing. I cant tell you what caused it happen though
I search through all of the programs I had installed that effect performance and eventually did a hard reset and it started working normally.
I also had an issue with programs running very slow and the tf3d lagged bad. You should flash your rom, it makes a world of difference. If you decide to do it, look through all of your installed programs from the factory rom and make a list of what you want to keep... not all roms have everything you need installed. Then just download all the programs back to your new rom. I used NATFs V2.3 and am really happy with it.
BTW I am a newb and have never done anything like that to a phone before... I just followed the instructions on the Rom development page (sticky) and it was a breeze.
you should do it
Thanks Mike for your help.
What worries me is what would I do if for any reson I need to send the phone back to Vodafone?
I have asked for a link to the defaul Vodafone Touch Pro rom on here but nothing has turned up.
I am also just worried about doing the whole flashing thing as I just don;t really want to break it
If you follow the steps in the stickies, you wont mess up your phone. I am not sure about the vodaphone rom... would it really matter to the company what rom you have if you warranty is covering a broken component of the phone. Just drop it in a bucket of water and claim the insurance taht way??? Maybe someone else can chime in.
I don't know what the deal is, I had them this morning, and even after a restore, I don't have any of my Input methods anymore. They all show but when I select one it doesn't apply. I should have:
Block Recognizer
Compact QWERTY
Full QWERTY
Keyboard (it defaults to this every time)
Letter Recognizer
Phone Keyboard
Transcriber
I have recently installed the new Landscape Full Manila update but I had these options even after that.
Anyone know how I can reinstall these options?! I hate that default keyboard!
It seems like they are all there still, like I can see options for them all, etc but it just wont change, also its like the small arrow by the keyboard isn't activated and I cant click it, I can change the default keyboard from small to large, but that's it!
ERRRR, what pisses me off is I backup ALL THE TIME, before every app install even, and when I do a restore, it still doesn't work, WTF good are backups then! Or does Spite Backup just suck and I should be using another?
This worrying about everything from one min to the next with this device is the only bad thing about it.
The only suggestion I have for you is to do a hard reset and restore using the most recent back up file until you find a back up file that works for you. I have used sprite back up many times before but this has never happened to me.
Are you using the stock Fuze ROM?
Yeah I'm using the stock ROM but I bypassed the bloatware and installed TF3D that was just released in the software thread, the full one with landscape mode.
I tried several backups and none worked, strange, not sure what caused this but I did find a work-around, its a small app called SIPChange, it was a shot in the dark but it worked for me, for anyone else with this issue, try it:
http://forum.xda-developers.com/showthread.php?t=271008
This actually even fixed the little arrow issue I have that wasn't letting me select the Input method on the fly, I did notice it loads at every reset tho, I don't care as long as it works!
Thanks guys, I hope this thread will help anyone else with the issue.
Sorry if this has already been posted but I did not find it. I have a question about the keyboard. I mainly use my phone for text messaging. However many of these ROMs have a problem with a lag when sliding out the keyboard. I get a new message and hit reply and it takes up to 10 seconds for me to be able to type my text with the slide out keyboard. I have tried numerous different ROMs with differing amounts of free memory but every one seems to have this lag. I'm not sure if this is my phone or what. It even did this with the JUSTME ROM that was stripped to the bare minimum. If someone could tell me how to fix this issue or point me in the direction of a ROM that doesn't have this problem, it would be greatly appreciated.
I've had a similar problem with a few of the ROMs out there. The keyboard has nothing to do with the lag in my place though... it's all a matter of how I go about replying.
If I get a message and hit "Reply" I find myself waiting impatiently for the program to load and the app to become responsive enough for me to type my reply. I found a while ago that if I launch the messaging app either through the Programs screen, via the Start Menu or by pressing the messaging button on the side (this is what I usually do) that the program opens quickly and I can get in and open the message and reply pretty quickly.
It's not a fix, but I hope it helps.
I don't do a lot of texting, but I don't think I've had the issue with the JustStable ROM at all... might be worth taking a look at too.
I found that if I limited the apps on the Today screen in 6 and 6.1 to 3 apps (messaging, calander, and time/date) my screen switched very fast when I flipped out the keyboard.
So now with the dual boot options posted and available for such a wide range of devices, i've decided to try android out and check on its progress.
I have had issues with my keyboard ever since WM6.5 had been leaked.. so its been for a while now. i would have to press very hard on my backspace key, and my spacebar would be hit or miss. I would hit it, and sometimes get multiple spaces, other times nothing at all.
I even flashed the default ATT stock rom to see if it was a rom problem.. there have been many threads about this saying that this was a hardware problem, and i hate to open a new one, but i think this deserves a new thread.
I installed android this morning, and ALL my keys work as they are supposed to. So i would like to get confirmations from other people with this issue on Windows Mobile, by having them try android and see.
I return to windows mobile and the problem still exists. I go back to android and the problem is gone! so i can confirm this is NOT A HARDWARE ISSUE
I will upload videos later.
Contact AT&T warranty about this, and try to convince them to give you a Tilt 2, tell them you don't want to have the same phone and keep having problems and then having to replace it again and want to stay a happy customer.
im guessing its a conflict between the two, but thats just my guess, not totally sure why, try taking out ur memory card and soft reset or if ure phone is fresh from flashing, try a hard reset and dont put the card in yet, do a quick test on office mobile and see if the problem still exist
Nothing makes the spacebar problem go away on WinMo. It works in some ROM's (very few) but most of the ROM's the spacebar problem is back. I can confirm it is not a hardware issue. I just need to hunt for the ROM's on which the space bar used to work. I will try Andriod and report back if the spacebar issue is gone. Downloading now
I can now confirm. The spacebar has issueon EnergyROM but has no issues while using android. TurboX2 good job on noticing this.
Next question how do we go about fixing this?
tael and energy gave me issues, my current one is captains and have no spacebar issue here
so does this mean that the keyboard issue is something that could potentially be solved with some modification to the keyboard driver?
i have a feeling that this will never be solved :/
the whole scenario just doesn't make sense.. like i said... you would think reverting back to stock should have made the keyboard work again.. but nope not for me at least
If I had to guess, I would think that the results you are seeing is a result of either a more sensitive driver or a driver with a more effective signal parser that can distinguish the button press despite the hardware being worn. I'm not sure how that could be used to our advantage but at least its something to go on.