Related
Hi all,
AKU3.2 comes with Bluetooth PAN - Internet Sharing, that fast and easy to use, you may see the example how to use here:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=69697
==============================================
Just would like to share our aku3.2 rom for futher improvement. This rom for experience rom upgrade user only!.
This rom is from Wizard rom with hacked some files.
Button Map OK! (All buttons and softkeys as Prophet)
WiFi OK!
Camera OK!
Charging LED OK! but delay about 10 seconds.
Battery Power OK!
Bluetooth OK! (I tested with Internet sharing, not test with a2dp yet)
This rom boot time is about 30 sec.
The problems are:
1. MSN can not sign in.
2. WiFi and Camera can not be used in the same time.
This rom is setting for WiFi, if you need to use camera you have to change registry.
Use registry editor and search for OV9650.dll and change to S5K3BAFX.dll then soft reset
If you want use WiFi again, you have to change registry back and soft reset.
3. MMS not work, no menu bar shown.
4. I don't know yet.
If you don't mind 3 above problems, you may use it as normal.
Thanks so much to Ruchonburi for his work.
Thanks to KTamas http://forum.xda-developers.com/showthread.php?t=276799.
Thanks to kremo http://forum.xda-developers.com/showthread.php?t=276986
You can download rom image from
ftp://xda:[email protected]/Prophet-PDAMobiz-AKU3.2-beta-OS.rar
Use aWizard to upgrade this rom.
I hope that remain problems can be solved soon.
Enjoy AKU3.2
nice, Thanks.
Any experts to solve the 3 probs?
Great work, I'll have a go fixing the problems. The reason the camera and wlan dont work together is that the module tnetwln.dll is overlapping memory with the camera driver, I think I can fix this.
Hopefully the msn and and mms problems are just related to missing files or registry entries.
Paul
psneddon said:
Great work, I'll have a go fixing the problems. The reason the camera and wlan dont work together is that the module tnetwln.dll is overlapping memory with the camera driver, I think I can fix this.
Hopefully the msn and and mms problems are just related to missing files or registry entries.
Paul
Click to expand...
Click to collapse
Great,
Thanks
Well the MMS issue is simply because there are some registry entries missing that would normall be setup by files bundles by the operator in the extended rom.
I'm currently working on getting the camera & wlan working and I'm flashing the rom as I type this (it takes about 20 minutes for anyone who doesnt know).
If I cant get MSN working I'll just remove it from the ROM and we can try and get it working as a seperate package as it means we dont need to keep trying to flash the rom, just create a cab file.
Basically I'm combining the various AKU3.2 out there to try and get a fully work version.
Also I'm creating a clean rom so that means I've removed smartdialling, HTC ZIP, voice dialling etc (as well as the registry entries for them). I prefer having a clean rom base that I can manually add features to using cab files.
psneddon said:
Well the MMS issue is simply because there are some registry entries missing that would normall be setup by files bundles by the operator in the extended rom.
I'm currently working on getting the camera & wlan working and I'm flashing the rom as I type this (it takes about 20 minutes for anyone who doesnt know).
If I cant get MSN working I'll just remove it from the ROM and we can try and get it working as a seperate package as it means we dont need to keep trying to flash the rom, just create a cab file.
Basically I'm combining the various AKU3.2 out there to try and get a fully work version.
Also I'm creating a clean rom so that means I've removed smartdialling, HTC ZIP, voice dialling etc (as well as the registry entries for them). I prefer having a clean rom base that I can manually add features to using cab files.
Click to expand...
Click to collapse
How did the wlan issue go?
What is the power led delay problem that is mentioned in the 1st post?
Is there anything I can do from my side to help you?
Still working on the wlan issue, I've got the AKU3.2 from the Universal as the modules have different memory addresses so it gives me more scope of fitting all the modules and drivers in the memory space.
Don't know what causes the LED delay, but its really not a problem as it just means you have to wait a few more seconds for the LED to go solid amber when you charge the device.
I suppose the best help you could give would be to test it once (if) I get the camera and wlan working together.
MSN issue seems to be unfixable, I guess I'll just remove it from the rom and we'll wait for Live Messenger to get released.
Success!!! Got the camera and wlan working just fine, going to do a little bit of testing, remove MSN, then I'll upload the rom.
I would like to test it.
Just one question: I am using a XDA Neo (G4) with JAMin 2.13 WWE ROM, but the device is not CID unlocked. I purchased the unit from a company who falshed the JAMin English ROM for me with some special equipment to bypass the CID issue. So, before I update to this AKU 3.2 ROM, what should I do? Can I directly upgrade to this AKU 3.2 ROM from JAMin ROM?
Also, what is the last version of aWizard? Could anyone please give me a download link?
I would be happy to test this ROM, if somebody can help me go through the upgrade process.
Thanks a lot!
Chan said:
..........The problems are:
1. MSN can not sign in.
2. WiFi and Camera can not be used in the same time.
This rom is setting for WiFi, if you need to use camera you have to change registry.
Use registry editor and search for OV9650.dll and change to S5K3BAFX.dll then soft reset
If you want use WiFi again, you have to change registry back and soft reset.
3. MMS not work, no menu bar shown.
4. I don't know yet.
If you don't mind 3 above problems, you may use it as normal.
........
Enjoy AKU3.2
Click to expand...
Click to collapse
Hehe, I do not use MSN on my Neo (JAMin), and I do not use MMS, too. So, #1 and #3 are not a problem to me, and I do not care about the LED delay, too. But I do use wifi and camera a lot, sometimes I use it at the same time. I truel hope this issue will be solved soon.
Msn
See the picture.
If you can solve the model name , I think you can get the MSN working.
YES! Coool!!!!!!! 28Mb RAM FREE
Can't upgrade it with awizard
Hi guys,
I am having difficulties with flashing the rom on my Qtek Prorhpet. The problme is that when I extract the rom and copy it in the ROM folder of aWizard directory and after that when choosing the "w" option in aWizard the ROM file can not be recognised.
Can some one help me. Can you please describe in details how extactly do you put the new ROM on the device.
Thanks
psneddon said:
Success!!! Got the camera and wlan working just fine, going to do a little bit of testing, remove MSN, then I'll upload the rom.
Click to expand...
Click to collapse
I've backed up everything and i'm ready to flash!
Also try what Iamguest suggests for the msn thingy.
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
psneddon said:
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
Click to expand...
Click to collapse
There won't be an official release for the prophet.... (i believe)
but thanks for your efforts
psneddon said:
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
Click to expand...
Click to collapse
I've try your modified rom, but it a bit buggy (and unstable) as you said. Maybe it came from module modification incomplete.
If you remember, could you tell me what you have done with new rom? So that I can continue your idea. Don't give up, this rom I've been working for 3 weeks already.
Thanks so much for working on it.
==============================
So now, still the only 3 problems remains, I wish I could have rom image builder.
For MSN, if you try merging my dump files with AKU2.0 rom image, you now can sign in with msn. But it creates new the problem new, is that prophet after turn off ~5 seconds it will turn on by itself. Can not be used as normal.
great work guys, keep it up!
Anyone tested a2dp yet?
Qtek s200 G4 chip (swisscom)
So I succesfully upgraded from the dopod novendor id rom to the Prophet_Clean_AKU32. using Awizard.
Now I am getting an error when trying to connect with activesync
(i had to reinstall activesync just to get connected so everything was clean)
It says "there is not enough free memory on your device to synchronize information" support code:8007000e after active sync connects
At first the contacts button didnt work at all so i assumed it had been stripped out, i installed inesoft address book 1.64 but though the program runs it doesnt fix the other issue.
Later: did some further testing and still no luck, have scoured the internet but just the usual dumb support help like check there are no programs running (i mean i can at least figure out to follow the error message instructions) , has anyone who used this rom got this problem or is it just me?
Contacts is the only activesync item selected and all the others work when tested. I even removed all entries from outlook contacts to test.
Still gives the same error! Any help will be greatly rewarded. (well thanked at least)
later: another bug seems to be the backlight that disactivates itsself from time to time and needs to be manually reactivated.
Once again, nice work, as I said, you always walk a step ahead. Tanks a lot for this release.
DarkForce's ROM already had 863 download for CHT rom , 527 download for WWE rom, 333 download for JPN rom ,192 download for GER rom ,134 download for CHS, 54 download for RUS rom , 53 download for DUT rom and 527 download for Radio rom 1.15.00 . very thank all of you like our rom , we are working at version 2.11.xx , please post your issue in here so we can correct it in version 2.11.xx , thanks again
DarkForce Team
first fo all, thy for that great german rom!!!! i just want to sent u a wish. would be great if u could include the usb hdd in the next version.
great work!
Suggestions:
Offer Two editions of each (with different sd size formatting -- size blocks)
Remove extra image files, music files and other files that dont need to be there.
Fix GPRS system. For India GPRS Networks (like Idea, Hutch, etc) when u set a profile for GPRS and APN and click the connect button nothing happens - it doesnt even try to locate the GPRS network.
Set default Higher Volume and higher bass by default since the media player n ringtones have lower volume by default.
Give the extra ROM all the extra cabs. If a user wants he can just delete it all using file manager else can use it for adding extra cabs if required. at the end of the day it makes no difference if its empty or not...the user can remove the files if required.
Integrate OMAP or whatever other Univeral Clocker there is and set it a higher but stable setting. Think of the speed we could get!
just a note
Hey there!
Love the rom. it really is one of the best.
Could you add the possibility to NOT get a sound when a normal sms is being sent? Its very annoying to hear that you sent an sms..
THANKS A MILLION!
Daniel
Issue
DarkForce Team said:
DarkForce's ROM already had 863 download for CHT rom , 527 download for WWE rom, 333 download for JPN rom ,192 download for GER rom ,134 download for CHS, 54 download for RUS rom , 53 download for DUT rom and 527 download for Radio rom 1.15.00 . very thank all of you like our rom , we are working at version 2.11.xx , please post your issue in here so we can correct it in version 2.11.xx , thanks again
DarkForce Team
Click to expand...
Click to collapse
First thanks a lot for your great job, i post your rom like the best!!!
http://forum.xda-developers.com/showthread.php?t=298020&page=14
Issue:
1) In test i have issue when stay connect usb and activesync (4.5) and do soft reset, universal freeze.
2) If setting only gsm (in registry) and do soft reset a time non always, freeze.
For test i have installed only SpbPocketPlus with close X active, and disable x from wm6. Rom radio 1.15 less delay that 1.14 and old version.
Best Regards
Very nice and reliable release but bluetooth headset causes occasional phone hangings. Same problem on every wm6 rom i flashed. Best bluetooth stack for my headset is in helmi 3.5 1.3.1
Thank u for the perferct work
The following is fe notes:
- the old office mobile icons (may be version, i don't know)
- The flight mode was not worked with me (closed all radios, but gsm didn't reactivate till i soft reset the jasjar)
- in a very few instances, the gprs was lost and a messeage that modem cannot be dialed come to me and i had to soft reset the device.
- once while the usb was connected, the devic freezed on incoming call.
I desire Italian language and ...videocall in your rom that is the best wm6.
Thanks.
This ROM is the Best !!!
European users hope that VideoCall tool will be ready soon........
Without videocall Universal seems bad........ this is my idea, guys.
nice job DarkForce
headset sign and incoming calls reception.
1 after you close the connection to a headset, for example to a car kit, the signal in the screen doesn't disappear.
2. times from the moment you receive a call and the button green to start the conversation takes some seconds (5 to 10).
3. what to change to have spanish language?
Tom Tom 601 issue
Hello,
With this rom I have strange situation with TomTom 6.01 - when I update 6.00 to 6.01 it says "no maps found" even if 6.00 was working fine and was with maps... Anyone noticed this problem???
Occasional lockups on softreset
Darkforce ROM (mine is WWE) is more stable than JW's (frequent lockups - don't know why). However, there are occasions when a sound alarm pops up, Uni hangs. One time softreset by poking the little hole will not normally get it to work only 4-5 times can resolve the frozen situation. Since it doesn't happen quite frequently (once per 2-3 days), I can do with it. Hope the upgrade will settle these issues.
I d like u can relese the CHS next version include CE-Star
Definitely the best WM6 ROM I've used so far! Great job!
My suggestion is that you not only unhide, but also unlock the Extended ROM. If you use some of the unlocking tools out there, they create a second folder called ExtendedROM, instead of unlocking the Extended_ROM. Which is a pain to deal with. The only thing that solved the problem was uni_ext_rom_unlock.exe which I found in this forum. It would be nice to have it unlocked already.
Thanks!
And once again - great work!
hi,
I noticed a couple of freeze when there is an incoming call and I only realised it when opening my universal and see the little box that pops up when there is a call.
Only solution is to reset
apart from this the rom is really nice
thanks and looking forward for an upgrade
This is the best ROM among the others so far, at least i found it more stable and no sudden lockup. I've been using this ROM for few days and experiencing only one lock-up so far, in which I was using intensively, Surfing with IE, MSN Messenger and Skype with LAN and GPRS connected.
I would expect the new update could fix / enable the keyboard backlight sensor. There are one or two minior issues on Bluetooth connection, but cannot re-produce at this point. I will report again if i can re-produce the probelm tonight.
Thanks
Pros/ Cons.. reccomendations
Hi Guys...
OK..
Reccomendations!
1. Make it vanilla!!
If not, then please make it so the voice control apps are installable by Cab. I prefer using MS Voice, and its a pain that i cant uninstall the other apps..
2. Fix Band issue!
Speaks for itself really!
3. Include scarybears checknotifications.
You have the same problem with this rom as a few others have had.. the same reason why prolonged usage always fails. Everytime an alarm is set, or reset takes place, there is a script or clock.exe entry made.. I use scarybear to "reclaim" this memory... It makes a HUGE difference!
4. Unlock & Unhide ExtendedRom as default
I know this has been asked before, however.. Make a cab to Hide it again...
5. Date / Time on one line!
Speaks for itself really!
6. Bottom bar thoughts....
OK.. The today plugin is a great acheivment.... However... There are some people (like me) who use Psshut... this still makes a bottom bar! Therefore the plugin is useless for me.. In fact it wastes the space on my screen.
So.. either make a cab to "add back" the bottom bar icons for comm-manager, power, backlight and orientation, OR make the plugin so it can add the icons from other programs!
7. Fix keyboard backlight Issue.
I know its a nice idea to have it react to keypresses.. but they sort of built in a sensor so it knew when it was needed! Not quite sure why yours doesnt activate the sensor.. but hey!
8. Fix the small errors in Buttons!
Not a biggie, but the icons are wrong under the buttons menu, and the text is missing on a couple...
By no means a full list, but all i had time for..
Dont get me wrong.. The rom is STUNNING. Still very fast, very stable, and apart from a few niggles... great in all aspects..
Keep up the good work!
Cannot remember least PHONE speak volume setting
Reboot device restore to default ?
-Chinese Trad.-----
變更通話音量後重新開機，通話音量會恢復預設值
how to solve this problem? replaced fw_dcr_1150_sta TiwlnapiCE.dll tnetwln.dll WiFiInit.exe WirelessService.dll?
i can only say you should touch twice instead of modifing files
its a safer option
Realy no solution?
Well, here the same anoying problem... Is there a solution?
Now I need to start my commanager, touch wifi before I see wifi in other programs like SPB Phonesuite, SBSH phonewheaver, etc...
It's a problem with every WM 6+ ROM i've used so far (over 10 diffirent).
Now using WM 6.1 CE OS.19588 from Diamond - CLEAN *FAST!*
I notice the same problem, i have to tap twice to activate Wireless.
I'm using Cloud Nine rom V0.9b, i tried other rom (XDA Mobile 6 Release 5 FINAL - Full), and it works fine.
Go to the windows directory. Copy wifi_init to your startup folder. Problem solved.
Reg fix
Wifi. init sometimes doesn't work for me, so I change
\\\registry\HKLM\Comm\TNETWLN1\Parms\HTCPreloadWifi
value to 1.
Ixtana_ran said:
Wifi. init sometimes doesn't work for me, so I change
\\\registry\HKLM\Comm\TNETWLN1\Parms\HTCPreloadWifi
value to 1.
Click to expand...
Click to collapse
Indeed, both should be done.
TY !
jwzg said:
Indeed, both should be done.
Click to expand...
Click to collapse
Thanks guys.
I needed to use the RegFIX & the shortcut. But now it works greet.
Thanks
I also copied the wifi_init link to the startup folder and i did the reg-fix on WM 6.1 CE OS.19588 from Diamond - CLEAN *FAST!*, but when I set HTCPreloadWifi to 1 I can't get my Wifi to start at all anymore!
Anyone got a solution for that? It's strange that it did solve the problem for some1 else in this topic with the same rom. Maybe I will try a hard reset tonight. It's not a big problem but it kinda annoys me
EDIT: Ok, I did a hard-reset last night, and now it works perfect after applying the reg-fix. WIFI turns on after a reset at once.
So I guess it had something to do with the programs I installed, or maybe I changed the registry. I'm going to install the programs again, one by one, and then check if WIFI is still good.
Ixtana_ran said:
Wifi. init sometimes doesn't work for me, so I change
\\\registry\HKLM\Comm\TNETWLN1\Parms\HTCPreloadWifi
value to 1.
Click to expand...
Click to collapse
why i cant turn on wifi using that solution..plz help me
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM
Hi there,
I have a Qtek S200 WM5 mobile phone. Working good with all options, except for the WPA2 support. I've tried to connect to the Wireless Network at my work, but I could not (needed to install a certificate; but this did not help).
I though: an upgrade to WM6 or 6.1 will work, so I decided to upgrade to WM6.1 (one of the Roms of varanusvincent; which by the way works pretty nice!!!).
Now with WM6.1 I can connect to the wireless network of my work, but as soon as I get a good connection, my screen turns black. The LED lights on top of the phone still show me that the Wireless connection and the Telephone connection are still working.
Does anyone have an idea what's going on?
Thanks in advance for your help!
Check the new Rom from Varanus i solve that problem allready also the recent pdaviet roms have the wpa problem fixed.
Well, I've tried to use one of the latest ROMS of varanusvincent, which should be supporting WPA2...
I guess I'll buy another telephone after all I don't want to change the ROM again now... just finished making all new settings...
Thanks for the reply!
did you change the radio rom.
What do you mean by change the Radio ROM?