Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM
Related
It seems that wifi scanners detectors like WiFiFoFum don't work with WM6 roms. It seems to load up fine but it cannot seems to find any access points. I tried every device in the list and still it cannot find anything. If I run it on any none WM6 OS [3.X roms using > WM6 ], it works correctly. Any ideas?
raiden said:
It seems that wifi scanners detectors like WiFiFoFum don't work with WM6 roms. It seems to load up fine but it cannot seems to find any access points. I tried every device in the list and still it cannot find anything. If I run it on any none WM6 OS [3.X roms using > WM6 ], it works correctly. Any ideas?
Click to expand...
Click to collapse
No problems with Xplore 1.1 - tested wififofum just three day ago. Find alot of ap and could connect. SO no problem.
Yes also NetBox 2.0 working fine
WiFiFoFum on WM6
Might want to make sure you get version 2.2.7 or above.
Second, try turning on the WIFI before you launch WiFiFoFum. I had a similar problem and never understood the "Power Device" menu selection, thats the same thing as turning the wifi radio on and off.
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Hi
I have the same Rom and the same Problem, no Wifi reconnect.
It has been stated by the cook 'its Right' at the first page of TNT.1933 that "
- Some of roms have the issue with cannot open the wifi from the first time"
maybe by reflashing or flashing the other versions of TNT .1933 solve this problem,no harm in trying.
it seems to be a problem with every wm6 rom i have used. I can connect fine to my apartments router but other places i could normally connect to very easily with wm5, i now cannot with wm6. Anyone else have this problem?
edit: this is not a problem with it connecting directly, it will not even connect manually or even show that a certain wireless network is in range even though i know that it is. I have reflashed to the same result
spencepu3 said:
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Click to expand...
Click to collapse
Use the .318 build (Jaguar, XM6, Loon kitchen). Thats the only build that does not have this problem in WM6, all the other builds have the problem.
WiFi problems w/1933
I think I've had exactly the same problems w/several TNT versions after TNT4 which worked OK. Also similar problems with
I have NOT had a problem w/WiFi using NBD 9.2 which has worked for several weeks now w/o hitch! NBD 9.2 is (relative to 1933) thin on applications so U have to track down the cabs and load. That is why I tried 1933 recently. No wifi so I went back to 9.2.
Good luck,
Jim
Cingular 8125 G3
NBD 9.2
SIM and CID unlocked
Radio 2.69.11 w/fix
I just met this for the very first time. Then it worked normaly. TNT5.0
Hello,
i recently installed the htc custom rom (1.25.405) on my device. after install all was great, but after some time i began having trouble enabling the wifi from comm manager. whenever i press the wifi tab in the comm manger wifi keeps staying off. i had the same problem on my wizard and there the solution was enabling the wifi preload from the registry (HKLM->Comm->TNETWLN1->Parms). these string dont exist on the cruise.
does anyone know of a fix to this problem or how to enable the wifi preload on the cruise ?
Try your luck at HKLM\Comm\TNETW12511\Parms
Olioaglio
hey Olioaglio,
thanks for your replay. tried looking there already.
usually there were two strings needed changing:
HTCPreloadStatus-->dword, decimal 1 (standard 0)
PreloadWifi-->dword, decimal 1 (standard 0)
cant seem to find the equivalent inside \TNETW12511\parms.
Soulution found:
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
Seems like i spoke too soon. the wifi problem was resolved for a while and then came back.
i flashed the black widow skinny v.2.5 rom and again the wifi worked for a while until it stopped enabling (when i press the wifi button in the comm manager it will turn on and immediatly off). i tried flashing the bepe 0.65 rom and even the latest radio rom (1.58.25.14) but nothing helps.
does anybody have an idea ?????
Hi, I have the same problem; wifi is always disabled.
I tried to modify the key:
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
and it seems to work ... but after only 10 minutes, I tried, it is still disabled.
When I click on Comm.Manager to able Wifi, it load a few seconds and after it is still off.
ROM is 1.24.408.1 ITA, original.
Radio is 1.58.21.23, original.
Thanks
Yep, I had the very same problem from the beginning until I installed Bepe's Rom v.64. Then I installed Goodlink for work and that ruined it again.
Sounds to me like some software conflicts somewhere that need to get fixed...
Anyway, you can try Bepe's latest ROM. Just don't install that piece of rubbish called Goodlink.
Well it seems that it is indeed a program conflict, i have tried to disable each process running until i found the culprit, it was the Pocket controller loader, after disabling it wifi would disable without any problems, lets see how lost this will last...
would installling WMWifiRouter stuff up the wifi. I have a stock polaris and havent upgraded the rom. Wifi was working fine, even after I installed WMWifiRouter. Then after about a couple of weeks, wifi just would not come on at all. But strangely, then i tried to fire up the WMWifiRouter, it would go up to a point past saying "WLAN on" and then stop at "Waiting for ICS".
In the end, I had to hard reset but have been afraid to re install WMWifiRouter. I was using a .92 version i think but now it's payware and I havent got the new one either.
Jackinabox - how do I disable the processes like you did?
thanks
Hey arul,
you can download schap'sTaskmanger here:
http://forum.xda-developers.com/showthread.php?p=1700898
or here for Taskmgr v.2.7 (not the latest there is version 2.9 somehwere out ther but i cant seem to find the link, but this one will do the trick) :
http://rapidshare.com/files/12973974/TaskMgrv2.7_WM2005_upxed.zip.html
thanks jackinabox. will give it a try.
Hello all,
does anyone solved the WiFi problem?
it seems to be a program conflict try to find the program that causes it by enabling the running program processes on your pda.
hmm thanks promissed new ROM update from HTC is really needed
Hi
I have a S710 Vox (Original HTC, not Orange or something)
Since the firmwareupdate, i have troubles with wifi.
Before, i could access it at my hole appartment with "auto" power.
Now, I have to change the WiFi settings to "fullpower" to get a connection to internet.
It doesnt depend how far I am away from my AP. (testet with 1m distance on FritzBoxFonWlan, LaFonera and Zyxel 660Series)
When i am close to the APs, i have full signal strengh...
When i change the wifisettings to fullpower, it emties my battery within 2 hours....
What could be the reason that i can't connect with the "Auto"-Powersettings?
Bringing up...
I've reflashed with the original ROM. First thing I tried is WLAN. Still same issues.
Is there anyone having any Idea why my WLAN is just running with "MAx-Power"-Setting`?
Tried serveral AccessPoints
solved
Installed WM6.1
Now it works
sirride said:
Installed WM6.1
Now it works
Click to expand...
Click to collapse
WM 6.1 from Dr. Gonzo ? the one available here ?
Jep.
Did u also have that issue?
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
afeudale said:
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
Click to expand...
Click to collapse
I have a bit different problem, but seems like yours.. sometimes, it doesnt try to connect, no failure message, but no try, my resolution is having spb gprs monitor, which i ever used, even i had this problem... in this case, only click connect and everything is ok... sometimes it doesnt connect or says message like yours on my other HTC XDAs (9000,9100....) but spb solved it everytime...
aaischa, I tried SPB but no luck...
Interestingly, I tried downgrading to WM5 and it works fine with that...
Anyone else having this problem?
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
afeudale said:
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
Click to expand...
Click to collapse
thanks, I had e the same problem
if only connect.mscr could run by itself
It would be great if connect.mscr could run when ever our treo's with hermes radios lost service. Mine with 154.07.00 once it looses service completely will not reconnect. If this script could run when the unit is not connected say every 10 minutes or so life would be good.
I have the same problem. Running 6.1 on the Telecom XT network in New Zealand...simply going into connections (as it says in the first post) and not doing anything solves it, but it is annoying. Any better solutions?
Radio: 1.56.70.11
ROM: WM6.1 (Treo750_OS5_2_19199WWE_STD)