It seems that wifi scanners detectors like WiFiFoFum don't work with WM6 roms. It seems to load up fine but it cannot seems to find any access points. I tried every device in the list and still it cannot find anything. If I run it on any none WM6 OS [3.X roms using > WM6 ], it works correctly. Any ideas?
raiden said:
It seems that wifi scanners detectors like WiFiFoFum don't work with WM6 roms. It seems to load up fine but it cannot seems to find any access points. I tried every device in the list and still it cannot find anything. If I run it on any none WM6 OS [3.X roms using > WM6 ], it works correctly. Any ideas?
Click to expand...
Click to collapse
No problems with Xplore 1.1 - tested wififofum just three day ago. Find alot of ap and could connect. SO no problem.
Yes also NetBox 2.0 working fine
WiFiFoFum on WM6
Might want to make sure you get version 2.2.7 or above.
Second, try turning on the WIFI before you launch WiFiFoFum. I had a similar problem and never understood the "Power Device" menu selection, thats the same thing as turning the wifi radio on and off.
Related
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Hi
I have the same Rom and the same Problem, no Wifi reconnect.
It has been stated by the cook 'its Right' at the first page of TNT.1933 that "
- Some of roms have the issue with cannot open the wifi from the first time"
maybe by reflashing or flashing the other versions of TNT .1933 solve this problem,no harm in trying.
it seems to be a problem with every wm6 rom i have used. I can connect fine to my apartments router but other places i could normally connect to very easily with wm5, i now cannot with wm6. Anyone else have this problem?
edit: this is not a problem with it connecting directly, it will not even connect manually or even show that a certain wireless network is in range even though i know that it is. I have reflashed to the same result
spencepu3 said:
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Click to expand...
Click to collapse
Use the .318 build (Jaguar, XM6, Loon kitchen). Thats the only build that does not have this problem in WM6, all the other builds have the problem.
WiFi problems w/1933
I think I've had exactly the same problems w/several TNT versions after TNT4 which worked OK. Also similar problems with
I have NOT had a problem w/WiFi using NBD 9.2 which has worked for several weeks now w/o hitch! NBD 9.2 is (relative to 1933) thin on applications so U have to track down the cabs and load. That is why I tried 1933 recently. No wifi so I went back to 9.2.
Good luck,
Jim
Cingular 8125 G3
NBD 9.2
SIM and CID unlocked
Radio 2.69.11 w/fix
I just met this for the very first time. Then it worked normaly. TNT5.0
I've been on a quest to find a rom where the wifi works. Every wm6 rom I've used, wifi shows the APs, it connects then disconnects soon after and the AP says unavailable, then it'll work again for a sec then disconnect. I read somewhere that a rom based on build 318 would work and someone gave the XDAr6 rom as a suggestion. Same thing. works fine in every WM5 rom, just none in WM6. Anyone have an idea why? Maybe I'm missing a step to get it working or something?
Hello. Install Battery Status, (I have version 1.04.203.beta4) and it has several tabs, one of which has a checkbox that disables the proxy if WiFi is enabled. I ran into this issue too when i first started playing with new ROMs, and was very frustrated until I found this nifty app, and best of all, it works with all the ROMS I've used. Enjoy, hope it helps.
I don't know why this fixed my Wi-Fi, but it did. I just got this phone a few days ago and I was having trouble since yesterday getting the WLAN to enable. I would click it in Comm Manager and nothing would happen. Something I did broke it.
Of course it still won't connect and says "Unavailable" whenever I try to connect to anything that was just a second ago "Available", but at least it's back to the way it was when I got it.
I just did a soft reset and only ran into this once
Try this when you get a chance...
Go into your registry and change the following settings
HKLM\Comm\TNETWLN1\Params
HTCPreloadStatus = 1
HTCPreloadWifi = 1
This solved my issue I had with Wifi after I reflashed my device a couple times to various WM6 ROMs.
For some reason the HTCPreloadStatus never sticks and always converts back to zero. But I was reading a thread and found this solution and it said to do both reg edits. The fix did work for me so I didn't question it.
Mine says "Available", then I enter the network key, and it says "Connecting" and then changes to "Unavailable". It has done this since I got the phone. Today I unlocked it all and upgraded to the latest T-Mobile ROM, and it still does this. I guess I'll keep going and upgrade to a WM6 ROM, but I'm afraid it still won't work then.
I have the same problem, but I can't find where is this registry. What is this, a file that I have to change or I open it from somewhere else ?
Hello,
i recently installed the htc custom rom (1.25.405) on my device. after install all was great, but after some time i began having trouble enabling the wifi from comm manager. whenever i press the wifi tab in the comm manger wifi keeps staying off. i had the same problem on my wizard and there the solution was enabling the wifi preload from the registry (HKLM->Comm->TNETWLN1->Parms). these string dont exist on the cruise.
does anyone know of a fix to this problem or how to enable the wifi preload on the cruise ?
Try your luck at HKLM\Comm\TNETW12511\Parms
Olioaglio
hey Olioaglio,
thanks for your replay. tried looking there already.
usually there were two strings needed changing:
HTCPreloadStatus-->dword, decimal 1 (standard 0)
PreloadWifi-->dword, decimal 1 (standard 0)
cant seem to find the equivalent inside \TNETW12511\parms.
Soulution found:
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
Seems like i spoke too soon. the wifi problem was resolved for a while and then came back.
i flashed the black widow skinny v.2.5 rom and again the wifi worked for a while until it stopped enabling (when i press the wifi button in the comm manager it will turn on and immediatly off). i tried flashing the bepe 0.65 rom and even the latest radio rom (1.58.25.14) but nothing helps.
does anybody have an idea ?????
Hi, I have the same problem; wifi is always disabled.
I tried to modify the key:
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
and it seems to work ... but after only 10 minutes, I tried, it is still disabled.
When I click on Comm.Manager to able Wifi, it load a few seconds and after it is still off.
ROM is 1.24.408.1 ITA, original.
Radio is 1.58.21.23, original.
Thanks
Yep, I had the very same problem from the beginning until I installed Bepe's Rom v.64. Then I installed Goodlink for work and that ruined it again.
Sounds to me like some software conflicts somewhere that need to get fixed...
Anyway, you can try Bepe's latest ROM. Just don't install that piece of rubbish called Goodlink.
Well it seems that it is indeed a program conflict, i have tried to disable each process running until i found the culprit, it was the Pocket controller loader, after disabling it wifi would disable without any problems, lets see how lost this will last...
would installling WMWifiRouter stuff up the wifi. I have a stock polaris and havent upgraded the rom. Wifi was working fine, even after I installed WMWifiRouter. Then after about a couple of weeks, wifi just would not come on at all. But strangely, then i tried to fire up the WMWifiRouter, it would go up to a point past saying "WLAN on" and then stop at "Waiting for ICS".
In the end, I had to hard reset but have been afraid to re install WMWifiRouter. I was using a .92 version i think but now it's payware and I havent got the new one either.
Jackinabox - how do I disable the processes like you did?
thanks
Hey arul,
you can download schap'sTaskmanger here:
http://forum.xda-developers.com/showthread.php?p=1700898
or here for Taskmgr v.2.7 (not the latest there is version 2.9 somehwere out ther but i cant seem to find the link, but this one will do the trick) :
http://rapidshare.com/files/12973974/TaskMgrv2.7_WM2005_upxed.zip.html
thanks jackinabox. will give it a try.
Hello all,
does anyone solved the WiFi problem?
it seems to be a program conflict try to find the program that causes it by enabling the running program processes on your pda.
hmm thanks promissed new ROM update from HTC is really needed
I just found an issue with Agile Messenger 7.4 on 3 different WM6.1 ROMs. I also had someone else verify that it was happening and not just an issue with my phone (Thanks mcmexican). This was tested with DCS 1.7 along with uttys_Official_WM6.1_Rom_5.2.1971, and XTRM-X1.0. Agile can be downloaded here. http://agilemobile.com/wm.html and has a 7 day trial if anyone wants to test it out.
I'm able to get Agile Messenger to work fine with the February ROM from AT&T, but so far it doesn't appear to work with the WM6.1 ROMs on the Kaiser platform. When attempting to connect Agile Messenger tries to initiate a new GPRS/3G dial out, even if you are already connected with an active data session. This tries and then fails several times before you receive the standard message that a GPRS/3G connection could not be established. The indicator at the top of the screen shows 3G or H and you can still browse the web or send email.
Agile Messenger 7.4 was working fine on a Hermes with the Stock AT&T and various other ROMs (WM6 and WM 6.1) from XDA. I've tried it without upgrading the radio using the standard AT&T radio and also using the three 6.1 compatible radios with the same result. I'm willing to bet that it's something odd with WM 6.1 on the Kaiser since it works fine on a Wizard and a Hermes. Can anyone do some troubleshooting?
try slueth's or dk's 3.02 based rom..
DK 3.02 works fine with Agile Messenger. Thanks for the suggestion. I wonder what is causing the problem with the other ROMs.
did you use the auto "connection settup"? or did u enter your settings manually? that little program showed to be problematic for some people including me, so I entered mine manually. I'm running dcs 1.7
Works for me on every ROM i tested out so far.
Is it not a radio problem....
Using (payed) version 7.4
lennie said:
did you use the auto "connection settup"? or did u enter your settings manually? that little program showed to be problematic for some people including me, so I entered mine manually. I'm running dcs 1.7
Click to expand...
Click to collapse
Thanks for the suggestion. I checked my connection settings and the Network Wizard set my Access Point Name to isp.cingular. I changed it to wap.cingular, which is what the stock AT&T ROM set it as and I now have Agile Messenger working on the Mobile Vista 1.1 ROM.
i had the same problem, and the connection wizard setup the proxy on the internet connections, once i went in and unchecked that box it worked just fine for me.
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM