Database Info

pdamobiz AKU3.2 beta for Prophet

Hi all,
AKU3.2 comes with Bluetooth PAN - Internet Sharing, that fast and easy to use, you may see the example how to use here:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=69697
==============================================
Just would like to share our aku3.2 rom for futher improvement. This rom for experience rom upgrade user only!.
This rom is from Wizard rom with hacked some files.
Button Map OK! (All buttons and softkeys as Prophet)
WiFi OK!
Camera OK!
Charging LED OK! but delay about 10 seconds.
Battery Power OK!
Bluetooth OK! (I tested with Internet sharing, not test with a2dp yet)
This rom boot time is about 30 sec.
The problems are:
1. MSN can not sign in.
2. WiFi and Camera can not be used in the same time.
This rom is setting for WiFi, if you need to use camera you have to change registry.
Use registry editor and search for OV9650.dll and change to S5K3BAFX.dll then soft reset
If you want use WiFi again, you have to change registry back and soft reset.
3. MMS not work, no menu bar shown.
4. I don't know yet.
If you don't mind 3 above problems, you may use it as normal.
Thanks so much to Ruchonburi for his work.
Thanks to KTamas http://forum.xda-developers.com/showthread.php?t=276799.
Thanks to kremo http://forum.xda-developers.com/showthread.php?t=276986
You can download rom image from
ftp://xda:[email protected]/Prophet-PDAMobiz-AKU3.2-beta-OS.rar
Use aWizard to upgrade this rom.
I hope that remain problems can be solved soon.
Enjoy AKU3.2

nice, Thanks.
Any experts to solve the 3 probs?

Great work, I'll have a go fixing the problems. The reason the camera and wlan dont work together is that the module tnetwln.dll is overlapping memory with the camera driver, I think I can fix this.
Hopefully the msn and and mms problems are just related to missing files or registry entries.
Paul

psneddon said:
Great work, I'll have a go fixing the problems. The reason the camera and wlan dont work together is that the module tnetwln.dll is overlapping memory with the camera driver, I think I can fix this.
Hopefully the msn and and mms problems are just related to missing files or registry entries.
Paul
Click to expand...
Click to collapse
Great,
Thanks

Well the MMS issue is simply because there are some registry entries missing that would normall be setup by files bundles by the operator in the extended rom.
I'm currently working on getting the camera & wlan working and I'm flashing the rom as I type this (it takes about 20 minutes for anyone who doesnt know).
If I cant get MSN working I'll just remove it from the ROM and we can try and get it working as a seperate package as it means we dont need to keep trying to flash the rom, just create a cab file.
Basically I'm combining the various AKU3.2 out there to try and get a fully work version.
Also I'm creating a clean rom so that means I've removed smartdialling, HTC ZIP, voice dialling etc (as well as the registry entries for them). I prefer having a clean rom base that I can manually add features to using cab files.

psneddon said:
Well the MMS issue is simply because there are some registry entries missing that would normall be setup by files bundles by the operator in the extended rom.
I'm currently working on getting the camera & wlan working and I'm flashing the rom as I type this (it takes about 20 minutes for anyone who doesnt know).
If I cant get MSN working I'll just remove it from the ROM and we can try and get it working as a seperate package as it means we dont need to keep trying to flash the rom, just create a cab file.
Basically I'm combining the various AKU3.2 out there to try and get a fully work version.
Also I'm creating a clean rom so that means I've removed smartdialling, HTC ZIP, voice dialling etc (as well as the registry entries for them). I prefer having a clean rom base that I can manually add features to using cab files.
Click to expand...
Click to collapse
How did the wlan issue go?
What is the power led delay problem that is mentioned in the 1st post?
Is there anything I can do from my side to help you?

Still working on the wlan issue, I've got the AKU3.2 from the Universal as the modules have different memory addresses so it gives me more scope of fitting all the modules and drivers in the memory space.
Don't know what causes the LED delay, but its really not a problem as it just means you have to wait a few more seconds for the LED to go solid amber when you charge the device.
I suppose the best help you could give would be to test it once (if) I get the camera and wlan working together.
MSN issue seems to be unfixable, I guess I'll just remove it from the rom and we'll wait for Live Messenger to get released.

Success!!! Got the camera and wlan working just fine, going to do a little bit of testing, remove MSN, then I'll upload the rom.

I would like to test it.
Just one question: I am using a XDA Neo (G4) with JAMin 2.13 WWE ROM, but the device is not CID unlocked. I purchased the unit from a company who falshed the JAMin English ROM for me with some special equipment to bypass the CID issue. So, before I update to this AKU 3.2 ROM, what should I do? Can I directly upgrade to this AKU 3.2 ROM from JAMin ROM?
Also, what is the last version of aWizard? Could anyone please give me a download link?
I would be happy to test this ROM, if somebody can help me go through the upgrade process.
Thanks a lot!

Chan said:
..........The problems are:
1. MSN can not sign in.
2. WiFi and Camera can not be used in the same time.
This rom is setting for WiFi, if you need to use camera you have to change registry.
Use registry editor and search for OV9650.dll and change to S5K3BAFX.dll then soft reset
If you want use WiFi again, you have to change registry back and soft reset.
3. MMS not work, no menu bar shown.
4. I don't know yet.
If you don't mind 3 above problems, you may use it as normal.
........
Enjoy AKU3.2
Click to expand...
Click to collapse
Hehe, I do not use MSN on my Neo (JAMin), and I do not use MMS, too. So, #1 and #3 are not a problem to me, and I do not care about the LED delay, too. But I do use wifi and camera a lot, sometimes I use it at the same time. I truel hope this issue will be solved soon.

Msn
See the picture.
If you can solve the model name , I think you can get the MSN working.

YES! Coool!!!!!!! 28Mb RAM FREE

Can't upgrade it with awizard
Hi guys,
I am having difficulties with flashing the rom on my Qtek Prorhpet. The problme is that when I extract the rom and copy it in the ROM folder of aWizard directory and after that when choosing the "w" option in aWizard the ROM file can not be recognised.
Can some one help me. Can you please describe in details how extactly do you put the new ROM on the device.
Thanks

psneddon said:
Success!!! Got the camera and wlan working just fine, going to do a little bit of testing, remove MSN, then I'll upload the rom.
Click to expand...
Click to collapse
I've backed up everything and i'm ready to flash!
Also try what Iamguest suggests for the msn thingy.

Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip

psneddon said:
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
Click to expand...
Click to collapse
There won't be an official release for the prophet.... (i believe)
but thanks for your efforts

psneddon said:
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
Click to expand...
Click to collapse
I've try your modified rom, but it a bit buggy (and unstable) as you said. Maybe it came from module modification incomplete.
If you remember, could you tell me what you have done with new rom? So that I can continue your idea. Don't give up, this rom I've been working for 3 weeks already.
Thanks so much for working on it.
==============================
So now, still the only 3 problems remains, I wish I could have rom image builder.
For MSN, if you try merging my dump files with AKU2.0 rom image, you now can sign in with msn. But it creates new the problem new, is that prophet after turn off ~5 seconds it will turn on by itself. Can not be used as normal.

great work guys, keep it up!
Anyone tested a2dp yet?

Qtek s200 G4 chip (swisscom)
So I succesfully upgraded from the dopod novendor id rom to the Prophet_Clean_AKU32. using Awizard.
Now I am getting an error when trying to connect with activesync
(i had to reinstall activesync just to get connected so everything was clean)
It says "there is not enough free memory on your device to synchronize information" support code:8007000e after active sync connects
At first the contacts button didnt work at all so i assumed it had been stripped out, i installed inesoft address book 1.64 but though the program runs it doesnt fix the other issue.
Later: did some further testing and still no luck, have scoured the internet but just the usual dumb support help like check there are no programs running (i mean i can at least figure out to follow the error message instructions) , has anyone who used this rom got this problem or is it just me?
Contacts is the only activesync item selected and all the others work when tested. I even removed all entries from outlook contacts to test.
Still gives the same error! Any help will be greatly rewarded. (well thanked at least)
later: another bug seems to be the backlight that disactivates itsself from time to time and needs to be manually reactivated.

Once again, nice work, as I said, you always walk a step ahead. Tanks a lot for this release.

WM6 ROM bugs complaint HERE! discuss 2gather

hi...i create this thread for everybody who had problems or bugs with the WM6 ROM either PDAMobiz or Smart1 ROM...
coz i find it difficult to search all of threads here...

If this thread doesnt get deleted here's my two cents: smart1 v2 ROM (G4 Prophet):
1. no java
2. Infrared doesnt work properly
3. phone freezes quite often
4. Charging issues: sometimes decides not to charge either on wall charger or PC USB cable...no set pattern there

1: Button 1 & 2 are not customizable ( to me , this is very very very very very very important, I change back to WM5 because of this)
2: when WIFI is ON and connected to a network, click the connection icon on the top of the screen, it will have a link for you to " TURN ON WIFI", shouldnt it be " TURN OFF WIFI" ?
3: cannot connect to internet once a while via WIFI, USB (activesync) , or GPRS , need soft reset to fix it. This issue sometimes happen to me on WM5 too, but seems more often on WM6.
4: I hard reset a few times to test different setting/ software etc, but 1 time, the WINDOWS live doesnt let me sign in at all, I have internet working (can get on google etc). But Windows live just keep telling me to check internet connection. -> hard reset.
For mndgz comment 2. Infrared doesnt work properly <<< I thought the Regedit, seems working for me. Maybe you just need another hardreset.
dmc3 is right, the pdamobiz WM6 post becomes too big... very hard to find answer....

well..thx..
but i think that v2 had fixed most of bugs in v1 that i'm using right now?
i haven't flash it to v2 but i think that mine is fine already.
only some bugs such as corrupted device lock,and contacts disappeared,and this ROM easily dead..
i'm looking forward on V3 ROM.hope that they've fixed all of bugs that now users have been complaining...
well..sometimes i think that maybe smart1 would creat new Open Source ROM just like Linux or else but compatible to WM applications

i have a strange error with the pdamobiz rom, i can't unlock my phone after a couple off soft resets it says i have wrong unlock code so i had to hard reset (had to hard reset 2times because off that, and i'm reinstalling phone now for 3th time but i'm not gonna choose a lock code).
it happens after i have installed almost all my software so that can also be the problem.
whan i go to lock in the settings menu, then i have to give in my code and that works but it doesn't work if i soft reset device
maybe the problem is my code itself and i choose 7519 ass code

Well.u must be using the same as mine,v1.
v2 doesn't have this problem(so far that i search all posts)
that's the bug..don't put any password until u've flash it to upcoming WM6 v3 ROM..maybe they've fixed this bug

suboxide said:
i have a strange error with the pdamobiz rom, i can't unlock my phone after a couple off soft resets it says i have wrong unlock code so i had to hard reset (had to hard reset 2times because off that, and i'm reinstalling phone now for 3th time but i'm not gonna choose a lock code).
it happens after i have installed almost all my software so that can also be the problem.
whan i go to lock in the settings menu, then i have to give in my code and that works but it doesn't work if i soft reset device
maybe the problem is my code itself and i choose 7519 ass code
Click to expand...
Click to collapse
...try this ...intead of softreset shut down the prophet and than turn it on again.....seem that wm6 not save all data .....for me this system works

videobelu said:
...try this ...intead of softreset shut down the prophet and than turn it on again.....seem that wm6 not save all data .....for me this system works
Click to expand...
Click to collapse
strange,even Microsoft already said that starting from WM5.ROM will be used to save data..so,it must be NON-VOLATILE...
really,i'm surprised that WM6 ROM is back to "StoneAge" if it is about saving data...
Smart1 should fixed this problem on v3

dmc3 said:
strange,even Microsoft already said that starting from WM5.ROM will be used to save data..so,it must be NON-VOLATILE...
really,i'm surprised that WM6 ROM is back to "StoneAge" if it is about saving data...
Smart1 should fixed this problem on v3
Click to expand...
Click to collapse
..yes strange but works also for wifi and bt setting..........................

I created some subfolders in my pushmail account (Mail2Web.com) in the Messaging tool, like "PPC Things" or "Private" but when I softreset my device (XDA Neo, G4) the mails in this subfolders where be deleted!!!
But when I look into my mail account via Firefox at PC I see them all in the right subfolders! :-?
Is it a bug or feature?
How to resolve this issue?

TimeZone
What about fixing the timezone prob ?

timezone is not a big problem.right now,if smart1 doesn't fix this "Volatile"-problem,this ROM is just a waste...

uccoffee said:
1: Button 1 & 2 are not customizable ( to me , this is very very very very very very important, I change back to WM5 Maybe you just need another hardreset.
....
Click to expand...
Click to collapse
Did this issue of button mapping ever get fixed in Smart v2? I don't believe this was ever corrected in ANY of the aku 3 WM5 ROMS either.

whats button mapping? i don't get it?

Well, let me explain. This is the single biggest issue I have with all the WM5 aku 3 and WM6 ROMs so far, and I doubt it will ever get fixed for any new ROMs. This is also what keeps from updating my prophet to anything higher than aku 2.2.
Buttons 1 and 2 correspond to the lower left Windows key and the OK key on the lower right. When you go into the control panel, you see 'buttons'. Here, you can assign a different function to these 2 buttons in addition to buttons 3 and 4 (camera and conn manager by default). In all these latest ROMs, you can ONLY change buttons 3 and 4. Changing the function of buttons 1 and 2 will not work for some reason.
Using Wisbar Advance 2, I use buttons 1 and 2 for the Cascading Start Menu and Close, respectively. However, this won't work for aku 3 ROMs and WM6 ROMs......at least not yet! aaarrrrggghhhh!

not a problem....i often use both of them..

Huh? What do you mean you use both of them?
Of course you can use them, but for no other purpose than the default start menu and the minimize functions.
If you're saying they CAN be changed, try changing one to the calculator and see if it works....

Bugs
I recently installed the Smart1's WM6 ROM v2 - overall very nice, much faster than my original WM5 ROM.
Few problems:-
1) Password - Seems to forget password, constantly says incorrect password entered. Only solution - hard reset.
2) MMS - Can send but not receive - sometimes cannot send either. Keypad lights up as if it is going to receive but no notification appears.
3) WiFi - Sometimes forgets WPA-PSK and actual network for that matter.
4) Sometimes when shutting down, the screen gets corrupted.
Also had a lot ofproblems getting it to work in the first place. I do understand that it isn't an official ROM, just thought it fair to make a point of this, hopefully complete noobs will avoid it as I suspect many will end up with nice rounded black bricks

Im Using PDA Mobiz 1.00 v1, All seems fine, Cant change Buttons 1 & 2 but no need for me.
I thought we were going to have HTML Emails in WM6? MS Demo shows it - doesnt seem to work for my Push emails?
Also my Radio version is 2.20.21, should i update this to teh 2.6 something or if it works dont mess with it?
JC

JCnME said:
Im Using PDA Mobiz 1.00 v1, All seems fine, Cant change Buttons 1 & 2 but no need for me.
I thought we were going to have HTML Emails in WM6? MS Demo shows it - doesnt seem to work for my Push emails?
Also my Radio version is 2.20.21, should i update this to teh 2.6 something or if it works dont mess with it?
JC
Click to expand...
Click to collapse
yes..i also think that PDA MobiZ Fantastic Xbow is still better than V2

[Public Beta] Crossbow Reloaded 1.7.1

Ok, I'm posting this in its own thread as people seem to have missed my post earlier today as it got buried in the Crossbow Reloaded 1.7 thread:
I've uploaded a test rebuild (couldn't sleep last night and was up early this morning). This is version 1.7.1 . The differences to 1.7 are:
A lot of the compression I did in 1.7 has been removed
Adobe Reader Removed due to the compression on other things making the rom too big
AltTab added and is mapped to the Comm key (this should fix the problem with Voice command people complained about).
Now built with the Core Kitchen
A few other things that I don't remember now
People that have had the dialpad issues in the 1.7 release are what this is really aimed at. If 1.7 was working for you, then stick with that version (unless you need to have a flash "fix" ). I've flashed 1.7.1 to my phone and so far it seems fine, but I really haven't tested it much, so consider this a public Beta. [Edit... Been on my device all day today and so far no issues that I've seen, but then 1.7 was fine for me too...]
I reserve the right to pull this off of RapidShare if I find something I don't like or if others find the keypad issue still exists (I'll post if I do this). Please do NOT MIRROR this without my permission as this is NOT an official release but one I'm trying to see if it fixes the issues with 1.7 that some have had.
Download Link:
Crossbow Reloaded 1.7.1
Please post feedback in this thread. I want to see if the keypad issue is gone now (mainly).
.

The new version is brilliant. I'm loving it so far.
Thanks man.

Does it Have Pocket Outlook?
If it doesn't how do I add it back. Ta, Rin.

Wise choice with the kitchen lol
Thx for mentioning. It makes me proud to hear/read that
I hope it didn't gave you any more trouble.
Did you already started to modify it not to use default install ? Cos if you didn't i'd suggest to wait a day at most ..i am trying to rebuild it. That thing bothers me too.

Running smooth!
I really liked the reloaded 1.5, was running the reloaded 1.7 version, liked it a lot exept the comm button and some OS stalls.
Flashing the 1.7.1 version now and will let you know how it's going in this threath. Also curiuos how the core kitchen is doing
After 30 minutes flashing I killed the shelltool. Since the phone seems stuck I gave it a soft reset and it booted with WM6 splash screen referring to farias rom. Gave it a factory reset and it seems working. Don't have acrobat so I asume it's the 1.7.1 version. Will start working on it now.
Weatherpanel, cybercom voice dialing, tomtom all running smooth. Some little tweaks (I changed under HKLM\SoftwareMicrosoft\Bluetooth\A2DP\Settings the key "Bitpool" and MaxSupportedBitPool to "40" decimal for my Jabra 620) and no problems sofar. Now do some VOIP settings. It never worked, now it's time to get it working on my private asterisk
Ok, working on with the new Beta rom I had some stalls (Three). Green light blinking only no responsive power button. After a reset I repeated my actions before the stalls only I couldn't reproduce it. Since about twelve hours of usage no problems

Mirror the download, please
Can someone mirror the download to some where else? Rapidshare is SUCK.

Flashed it 30 minutes age, installing soft right now, and everything seems to be ok. I had problems with dial pad in 1.7, but in this its ok. Will post in case of any issues

A new 100mbit mirror
Yo mfrazzz, got you a mirror again:
Mirror

TheWizzard2203 said:
Yo mfrazzz, got you a mirror again:
Mirror
Click to expand...
Click to collapse
Thanks for that mirror, but nobody else mirror this for now. I'll wait a day or so for reports of problems then decide if its the final version.
If you flash this and it works fine, please post that. If there are problems with the rom, please post those.

testing new version... no probls found...

Same here, just flashed it and testing now. So far the dialpad issue looks to be resolved. Not certain yet, will post problems that occur.

Nice rom
fast and easy to use
BUT...
I think i have a pb with my battery
lose 5% by hour ... is it normal?
ps : but all is perfect

I just had time to come back to XDA since I loaded CBR 1.5.
I have had the dialpad issues in 1.5 and thought it was just additional software I added. The device didn't lock up and all other functions worked.
The solution I found that worked was to pull the battery for one minute, then do a soft reset once it booted up.
Will load 1.7.1 tonight.
Thanks and keep up the good work!!!

ndoeberlein said:
I have had the dialpad issues in 1.5 and thought it was just additional software I added. The device didn't lock up and all other functions worked.
Click to expand...
Click to collapse
You had dialpad issues with 1.5??? Nobody has ever reported that (that I remember), and 1.7.1 is directly built off of 1.5 (thats before I used compression or anything. 1.7.1 does use compression on a few things, but very minimal compared to what I did with 1.7). While there were definetly dial pad issues in 1.7, I think if you did have dialpad issues in 1.5, it truely was due to 3rd party apps, or tweaks on your phone.
Please report back how 1.7.1 works for you. Overall I'm happy with it, but I felt 1.7 was actually a faster rom than this one (there are times this one feels slightly slugish in places and I may have to turn on overclocking (where I never considered overclocking 1.7)).
So far 1.7.1 is looking good (but so did 1.7 for about 24 hours). I may make this an official release as is if I don't hear anything before tomorrow evening.

kwanice said:
Nice rom
fast and easy to use
BUT...
I think i have a pb with my battery
lose 5% by hour ... is it normal?
ps : but all is perfect
Click to expand...
Click to collapse
I am running version 1.7 but the battery life on this build is superb. Today I only made one call, left push E-Mail on a turned WiFi on and off a few times. After 13 hours I was down to 98% ! This is with a one month old battery.
How old is your battery ? Mine started to fail after 14 months.

i have not had any problems yet. It's great! will let you know a few days if I ran into any problems.

Voice command issue is it gone?
Hi mfrazzz,
Thanks again for another new version.In the previous version I reported one issue with voice command. Is that resolved in this version.
Issue was the voice command could not be activated using bluetooth headset. I have seen the keypad issue in 1.7 and sometime few error messages as well.

banerjeez said:
Hi mfrazzz,
Thanks again for another new version.In the previous version I reported one issue with voice command. Is that resolved in this version.
Issue was the voice command could not be activated using bluetooth headset. I have seen the keypad issue in 1.7 and sometime few error messages as well.
Click to expand...
Click to collapse
There was no issue with Voice Command and BlueTooth headset in 1.7 that I know of. I have a Plantronics Voyager 510 BT headset and a Bluespoon Spider stereo (A2DP) BT headset, and both pair up fine, and both control Voice Command fine for me. I know others using 1.7 and BT headsets worked fine with Voice Command for them also. It could be an issue with your headset and WM6, 3rd party software, or something else.
The only Voice Command issue I know of in 1.7 was that there was a button mapped by default that wouldn't work properly. I fixed that so that the Voice button (Button 4, upper right side of phone) now maps to AltTab app. AFter you install Voice Command it will map to your Messages button (button 1), but thats how Microsoft installs it, not my doing. You can then redo the buttons in Settings > Buttons and you are good to go (although I really like AltTab now, so I left it on Button 4 and only use Voice Command via my BT headset).

i had problems with 1.7...in that i the dialpad keys disappeared after first flash. i did a clear storage (1234, etc) and the dialpad came up. flashed this version (downgraded to official t-mobile 2.26, as I always do first) and i don't seem to have the same problem. everything was in working order the first time around. the rom actually feels a bit faster than 1.7. thx.

monkey_knight said:
i had problems with 1.7...in that i the dialpad keys disappeared after first flash. i did a clear storage (1234, etc) and the dialpad came up. flashed this version (downgraded to official t-mobile 2.26, as I always do first) and i don't seem to have the same problem. everything was in working order the first time around. the rom actually feels a bit faster than 1.7. thx.
Click to expand...
Click to collapse
if I wanna flash to the official t-mobile rom first can I use the rom program of t-mobile itself?
RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe is my default rom I think

Issues with Alpha Wm6 Rom

hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas

I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!

Channels don't work.

in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels

ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+

mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.

Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?

Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards

I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.

boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.

unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.

I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.

Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!

The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.

tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.

bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.

[Issues] Open Touch v4.0 | WM 6.1 | T-Mobile Wing!

Folks,
I'm starting this new thread since the release one is getting way too big to manager.
Please start posting issues related to my rom here, make sure they are actual issues and not user error.
Regards,

Windows Live / Hotmail Problems
Does anyone else have problems getting Windows Live to sync your hotmail? I finally got it working with the push support, but it does not allow me to download attachments. Anytime I try to download an attachment it says failed to sync. I've tried the 3 latest versions available from this board and none of them seem to work. I've also tried these combinations with both versions of biggy 4.0 to no avail. With open touch 3.0 (Windows live biggie) the Windows Live service was working perfectly. I can't imagine that having windows live built into the Rom was what made the difference. Any one have any ideas? If this is simply an unfixable bug do you know if the gmail imap works like a push client? I tried to configure gmail, but it wouldn't allow anything quicker than a check every 5 mins.
Once again thanks ttran for your hard work in creating this great rom. Without it I'd probably be an iSheep by now.
thanks in advance

Not sure if this is an operator error or the rom error but I installed the Black Dialer from this link http://forum.xda-developers.com/showpost.php?p=1649317&postcount=1
I followed the instructions and did a soft reset, after that the Micro v4.1 run really sloooow. I have to perform a hard reset and reinstall all the other cabs.
So is it because I installed the wrong dialer cab or is it something wrong with the Micro v4.1? Whatever reason is I hope this is a good info for other ppl, too.
Other than that the Micro v4.1 run amazing fast and I do miss the black dial from the Lite Black version

when i added the battery to my toolbar and decided to take it off, the taskmanager that was up there disappeared, i cant get it back

djkdawg said:
when i added the battery to my toolbar and decided to take it off, the taskmanager that was up there disappeared, i cant get it back
Click to expand...
Click to collapse
I was all ready to get mad....break out the flamethowers and what not, but after testing this is CONFIRMED. I added percent and mem feedback to the screen using QM, removed them and could not reenable htc task mgr. I want to say there used to be an option in the HTC x-button settings to show on today screen. That option is not there. Currently searching for the reg key.... will update post

high pitch noise comming from the speaker after flashing the rom

pixelwix said:
high pitch noise comming from the speaker after flashing the rom
Click to expand...
Click to collapse
Using battery status?? I get the noise while using the cpu scaler UNDERclocking below 149. If it annoys you that much raise your min to 149. Otherwise, just try setting different processor speeds...dont over do it, see if that doesnt help.

ttran...I finally resolved my problem with Pocket Nester! Turns out it was user error... I had the files on my storage card in My Documents instead of having them at the root level. I noticed that it was seeing some of the folders on the storage card but none of the ones in My Documents. I moved them to the root of the storage card and it works!

since there is talk about the dialer i thought i would ask... in OT Biggy 3.0 the dialer had buttons that were quite large.
in this version the dialer is alot better, because it has the contacts built right into it at the top. however there is alot of space between the buttons, making them too small for my fingers.
is there a skin that just makes the dialer buttons bigger without downgrading back to the 3.0 version?
great work ttran, i am running 4.0 biggy w/ cube... just fyi and no issues thus far (only been testing for 2 days though)

Radio issue?
I'm not sure if this is a radio issue or something else, but here goes.
I flashed the lite black rom late last week.
I've been running a BT GPS for a while now with this phone. I've had my BT headset paired as well. I can use both at the same time. Monday, while talking on the headset, it just ended the call spontaneously. A few minutes later, after getting a call back on, it just ended the BT portion, and I had to actually pick up the phone (Horrors!)
Today, the cell phone side seems to be having troubles. (I've not tried the BT headset again, but still running the GPS) Several times I have had a "!" next to the phone icon in place of a signal strength meter... no signal or some error. I've had connection errors with the GPRS as well.
I may try out the micro with the newer radio in it, or look more into flashing an older radio version on here.
Let me know if you need any more details.

dirtisgood said:
I'm not sure if this is a radio issue or something else, but here goes.
I flashed the lite black rom late last week.
I've been running a BT GPS for a while now with this phone. I've had my BT headset paired as well. I can use both at the same time. Monday, while talking on the headset, it just ended the call spontaneously. A few minutes later, after getting a call back on, it just ended the BT portion, and I had to actually pick up the phone (Horrors!)
Today, the cell phone side seems to be having troubles. (I've not tried the BT headset again, but still running the GPS) Several times I have had a "!" next to the phone icon in place of a signal strength meter... no signal or some error. I've had connection errors with the GPRS as well.
I may try out the micro with the newer radio in it, or look more into flashing an older radio version on here.
Let me know if you need any more details.
Click to expand...
Click to collapse
Hi,
I'm aware of the issues with the current radio, that why I posted the old radio and splash from v3.0.
Please go back to the first page of the actual release page for v4.0 to download it.

joking said:
Not sure if this is an operator error or the rom error but I installed the Black Dialer from this link http://forum.xda-developers.com/showpost.php?p=1649317&postcount=1
I followed the instructions and did a soft reset, after that the Micro v4.1 run really sloooow. I have to perform a hard reset and reinstall all the other cabs.
So is it because I installed the wrong dialer cab or is it something wrong with the Micro v4.1? Whatever reason is I hope this is a good info for other ppl, too.
Other than that the Micro v4.1 run amazing fast and I do miss the black dial from the Lite Black version
Click to expand...
Click to collapse
The dialer I used for v4.0 is different than any others. I did not include it in the micro since there are so many people with different wants and needs.
Some dont like the color of the dialer, some don't like the way the buttons are too small, and etc.
Thus I just plan left it out, so you the user can install a different dialer on top of the existing one.
But I think the one you try to use does not work correctly as a cab.
I've tested the micro version by installing different dialers with success.
I will try and locate a similar dilaer to mine or just create a cab for you folks as soon as I get some free time.
I still need to post different colors for the back ground as well.
Been busy working on my personal rom which will be for version 5.0 and the other versions of 4.0.

i'm using OT 4.0 biggy vista and everytime I set the backlight option to turn off after 3 minutes instead of 30 seconds and the power to turn off in 5 minutes instead of 2 as soon as the power goes off and I turn it on it's right back to 30 seconds and 2 minutes. This ain't a major issue it's just a pain in the ass cuz i'm using slide to unlock and evry 30 seconds I have to keep unlocking it.

nextpimp said:
I was all ready to get mad....break out the flamethowers and what not, but after testing this is CONFIRMED. I added percent and mem feedback to the screen using QM, removed them and could not reenable htc task mgr. I want to say there used to be an option in the HTC x-button settings to show on today screen. That option is not there. Currently searching for the reg key.... will update post
Click to expand...
Click to collapse
I personally like it that way better, That way the HTC task manager and the OK button dont overlap and creat confusion. Instead, I use Quickmenu since that has it's own task manager. It shows you what's running and you can close them as well using Quickmenu.
Take a look into it

ttran001 said:
Been busy working on my personal rom which will be for version 5.0 and the other versions of 4.0.
Click to expand...
Click to collapse
I'm more then willing to Beta test 5.0 when ready let me know!

nKiwan said:
I'm more then willing to Beta test 5.0 when ready let me know!
Click to expand...
Click to collapse
I'm game too.

ttran001 said:
The dialer I used for v4.0 is different than any others. I did not include it in the micro since there are so many people with different wants and needs.
Some dont like the color of the dialer, some don't like the way the buttons are too small, and etc.
Thus I just plan left it out, so you the user can install a different dialer on top of the existing one.
But I think the one you try to use does not work correctly as a cab.
I've tested the micro version by installing different dialers with success.
I will try and locate a similar dilaer to mine or just create a cab for you folks as soon as I get some free time.
I still need to post different colors for the back ground as well.
Been busy working on my personal rom which will be for version 5.0 and the other versions of 4.0.
Click to expand...
Click to collapse
Yes you're right. I had to hard reset the Wing since that Black dialer doesn't have the removed option. Well it's a learning experience for me too. And fortunately that v4.1 is UC, all I need to do is remove those cabs from the SDConfig.txt file and re-run it again and voila all the cabs I need is back on the Wing.
Can't wait till you post the cab for the dialer.
So far I love the Lite Black but I like the speed on the Micro better. That's why I try to get the Micro as much closer to the Lite Black as possible.
1 more thing I notice on the Micro, after installed "JUVS HTC Home.v2_1_1005722_s0" cab sometime when I switch back to the home the area where the HTC Home should be got "scramble" for about 2 sec. I still try to duplicate it and report back. It already happened to me 2 times today.

now people have to read 2 threads for 1 rom....... mhhhhhhh.

Just can say Thanks for your great rom.!
It runs perfect..

papamopps said:
now people have to read 2 threads for 1 rom....... mhhhhhhh.
Click to expand...
Click to collapse
This is why "Tab browser" kick in