Related
Hi all,
AKU3.2 comes with Bluetooth PAN - Internet Sharing, that fast and easy to use, you may see the example how to use here:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=69697
==============================================
Just would like to share our aku3.2 rom for futher improvement. This rom for experience rom upgrade user only!.
This rom is from Wizard rom with hacked some files.
Button Map OK! (All buttons and softkeys as Prophet)
WiFi OK!
Camera OK!
Charging LED OK! but delay about 10 seconds.
Battery Power OK!
Bluetooth OK! (I tested with Internet sharing, not test with a2dp yet)
This rom boot time is about 30 sec.
The problems are:
1. MSN can not sign in.
2. WiFi and Camera can not be used in the same time.
This rom is setting for WiFi, if you need to use camera you have to change registry.
Use registry editor and search for OV9650.dll and change to S5K3BAFX.dll then soft reset
If you want use WiFi again, you have to change registry back and soft reset.
3. MMS not work, no menu bar shown.
4. I don't know yet.
If you don't mind 3 above problems, you may use it as normal.
Thanks so much to Ruchonburi for his work.
Thanks to KTamas http://forum.xda-developers.com/showthread.php?t=276799.
Thanks to kremo http://forum.xda-developers.com/showthread.php?t=276986
You can download rom image from
ftp://xda:[email protected]/Prophet-PDAMobiz-AKU3.2-beta-OS.rar
Use aWizard to upgrade this rom.
I hope that remain problems can be solved soon.
Enjoy AKU3.2
nice, Thanks.
Any experts to solve the 3 probs?
Great work, I'll have a go fixing the problems. The reason the camera and wlan dont work together is that the module tnetwln.dll is overlapping memory with the camera driver, I think I can fix this.
Hopefully the msn and and mms problems are just related to missing files or registry entries.
Paul
psneddon said:
Great work, I'll have a go fixing the problems. The reason the camera and wlan dont work together is that the module tnetwln.dll is overlapping memory with the camera driver, I think I can fix this.
Hopefully the msn and and mms problems are just related to missing files or registry entries.
Paul
Click to expand...
Click to collapse
Great,
Thanks
Well the MMS issue is simply because there are some registry entries missing that would normall be setup by files bundles by the operator in the extended rom.
I'm currently working on getting the camera & wlan working and I'm flashing the rom as I type this (it takes about 20 minutes for anyone who doesnt know).
If I cant get MSN working I'll just remove it from the ROM and we can try and get it working as a seperate package as it means we dont need to keep trying to flash the rom, just create a cab file.
Basically I'm combining the various AKU3.2 out there to try and get a fully work version.
Also I'm creating a clean rom so that means I've removed smartdialling, HTC ZIP, voice dialling etc (as well as the registry entries for them). I prefer having a clean rom base that I can manually add features to using cab files.
psneddon said:
Well the MMS issue is simply because there are some registry entries missing that would normall be setup by files bundles by the operator in the extended rom.
I'm currently working on getting the camera & wlan working and I'm flashing the rom as I type this (it takes about 20 minutes for anyone who doesnt know).
If I cant get MSN working I'll just remove it from the ROM and we can try and get it working as a seperate package as it means we dont need to keep trying to flash the rom, just create a cab file.
Basically I'm combining the various AKU3.2 out there to try and get a fully work version.
Also I'm creating a clean rom so that means I've removed smartdialling, HTC ZIP, voice dialling etc (as well as the registry entries for them). I prefer having a clean rom base that I can manually add features to using cab files.
Click to expand...
Click to collapse
How did the wlan issue go?
What is the power led delay problem that is mentioned in the 1st post?
Is there anything I can do from my side to help you?
Still working on the wlan issue, I've got the AKU3.2 from the Universal as the modules have different memory addresses so it gives me more scope of fitting all the modules and drivers in the memory space.
Don't know what causes the LED delay, but its really not a problem as it just means you have to wait a few more seconds for the LED to go solid amber when you charge the device.
I suppose the best help you could give would be to test it once (if) I get the camera and wlan working together.
MSN issue seems to be unfixable, I guess I'll just remove it from the rom and we'll wait for Live Messenger to get released.
Success!!! Got the camera and wlan working just fine, going to do a little bit of testing, remove MSN, then I'll upload the rom.
I would like to test it.
Just one question: I am using a XDA Neo (G4) with JAMin 2.13 WWE ROM, but the device is not CID unlocked. I purchased the unit from a company who falshed the JAMin English ROM for me with some special equipment to bypass the CID issue. So, before I update to this AKU 3.2 ROM, what should I do? Can I directly upgrade to this AKU 3.2 ROM from JAMin ROM?
Also, what is the last version of aWizard? Could anyone please give me a download link?
I would be happy to test this ROM, if somebody can help me go through the upgrade process.
Thanks a lot!
Chan said:
..........The problems are:
1. MSN can not sign in.
2. WiFi and Camera can not be used in the same time.
This rom is setting for WiFi, if you need to use camera you have to change registry.
Use registry editor and search for OV9650.dll and change to S5K3BAFX.dll then soft reset
If you want use WiFi again, you have to change registry back and soft reset.
3. MMS not work, no menu bar shown.
4. I don't know yet.
If you don't mind 3 above problems, you may use it as normal.
........
Enjoy AKU3.2
Click to expand...
Click to collapse
Hehe, I do not use MSN on my Neo (JAMin), and I do not use MMS, too. So, #1 and #3 are not a problem to me, and I do not care about the LED delay, too. But I do use wifi and camera a lot, sometimes I use it at the same time. I truel hope this issue will be solved soon.
Msn
See the picture.
If you can solve the model name , I think you can get the MSN working.
YES! Coool!!!!!!! 28Mb RAM FREE
Can't upgrade it with awizard
Hi guys,
I am having difficulties with flashing the rom on my Qtek Prorhpet. The problme is that when I extract the rom and copy it in the ROM folder of aWizard directory and after that when choosing the "w" option in aWizard the ROM file can not be recognised.
Can some one help me. Can you please describe in details how extactly do you put the new ROM on the device.
Thanks
psneddon said:
Success!!! Got the camera and wlan working just fine, going to do a little bit of testing, remove MSN, then I'll upload the rom.
Click to expand...
Click to collapse
I've backed up everything and i'm ready to flash!
Also try what Iamguest suggests for the msn thingy.
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
psneddon said:
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
Click to expand...
Click to collapse
There won't be an official release for the prophet.... (i believe)
but thanks for your efforts
psneddon said:
Uploading now, but from my testing its a bit buggy (AKU32 is a beta I think after all).
The camera does work but with the following problems
*After exiting the camera app the screen orientation does not change back to portrait mode.
*After each soft reset you need to press the camera buttin twice to get it to load.
I've went back to AKU2 and think I will wait for the official AKU32 release.
ftp://xda:[email protected] Clean AKU32 Beta/Prophet_Clean_AKU32.zip
Click to expand...
Click to collapse
I've try your modified rom, but it a bit buggy (and unstable) as you said. Maybe it came from module modification incomplete.
If you remember, could you tell me what you have done with new rom? So that I can continue your idea. Don't give up, this rom I've been working for 3 weeks already.
Thanks so much for working on it.
==============================
So now, still the only 3 problems remains, I wish I could have rom image builder.
For MSN, if you try merging my dump files with AKU2.0 rom image, you now can sign in with msn. But it creates new the problem new, is that prophet after turn off ~5 seconds it will turn on by itself. Can not be used as normal.
great work guys, keep it up!
Anyone tested a2dp yet?
Qtek s200 G4 chip (swisscom)
So I succesfully upgraded from the dopod novendor id rom to the Prophet_Clean_AKU32. using Awizard.
Now I am getting an error when trying to connect with activesync
(i had to reinstall activesync just to get connected so everything was clean)
It says "there is not enough free memory on your device to synchronize information" support code:8007000e after active sync connects
At first the contacts button didnt work at all so i assumed it had been stripped out, i installed inesoft address book 1.64 but though the program runs it doesnt fix the other issue.
Later: did some further testing and still no luck, have scoured the internet but just the usual dumb support help like check there are no programs running (i mean i can at least figure out to follow the error message instructions) , has anyone who used this rom got this problem or is it just me?
Contacts is the only activesync item selected and all the others work when tested. I even removed all entries from outlook contacts to test.
Still gives the same error! Any help will be greatly rewarded. (well thanked at least)
later: another bug seems to be the backlight that disactivates itsself from time to time and needs to be manually reactivated.
Once again, nice work, as I said, you always walk a step ahead. Tanks a lot for this release.
hi...i create this thread for everybody who had problems or bugs with the WM6 ROM either PDAMobiz or Smart1 ROM...
coz i find it difficult to search all of threads here...
If this thread doesnt get deleted here's my two cents: smart1 v2 ROM (G4 Prophet):
1. no java
2. Infrared doesnt work properly
3. phone freezes quite often
4. Charging issues: sometimes decides not to charge either on wall charger or PC USB cable...no set pattern there
1: Button 1 & 2 are not customizable ( to me , this is very very very very very very important, I change back to WM5 because of this)
2: when WIFI is ON and connected to a network, click the connection icon on the top of the screen, it will have a link for you to " TURN ON WIFI", shouldnt it be " TURN OFF WIFI" ?
3: cannot connect to internet once a while via WIFI, USB (activesync) , or GPRS , need soft reset to fix it. This issue sometimes happen to me on WM5 too, but seems more often on WM6.
4: I hard reset a few times to test different setting/ software etc, but 1 time, the WINDOWS live doesnt let me sign in at all, I have internet working (can get on google etc). But Windows live just keep telling me to check internet connection. -> hard reset.
For mndgz comment 2. Infrared doesnt work properly <<< I thought the Regedit, seems working for me. Maybe you just need another hardreset.
dmc3 is right, the pdamobiz WM6 post becomes too big... very hard to find answer....
well..thx..
but i think that v2 had fixed most of bugs in v1 that i'm using right now?
i haven't flash it to v2 but i think that mine is fine already.
only some bugs such as corrupted device lock,and contacts disappeared,and this ROM easily dead..
i'm looking forward on V3 ROM.hope that they've fixed all of bugs that now users have been complaining...
well..sometimes i think that maybe smart1 would creat new Open Source ROM just like Linux or else but compatible to WM applications
i have a strange error with the pdamobiz rom, i can't unlock my phone after a couple off soft resets it says i have wrong unlock code so i had to hard reset (had to hard reset 2times because off that, and i'm reinstalling phone now for 3th time but i'm not gonna choose a lock code).
it happens after i have installed almost all my software so that can also be the problem.
whan i go to lock in the settings menu, then i have to give in my code and that works but it doesn't work if i soft reset device
maybe the problem is my code itself and i choose 7519 ass code
Well.u must be using the same as mine,v1.
v2 doesn't have this problem(so far that i search all posts)
that's the bug..don't put any password until u've flash it to upcoming WM6 v3 ROM..maybe they've fixed this bug
suboxide said:
i have a strange error with the pdamobiz rom, i can't unlock my phone after a couple off soft resets it says i have wrong unlock code so i had to hard reset (had to hard reset 2times because off that, and i'm reinstalling phone now for 3th time but i'm not gonna choose a lock code).
it happens after i have installed almost all my software so that can also be the problem.
whan i go to lock in the settings menu, then i have to give in my code and that works but it doesn't work if i soft reset device
maybe the problem is my code itself and i choose 7519 ass code
Click to expand...
Click to collapse
...try this ...intead of softreset shut down the prophet and than turn it on again.....seem that wm6 not save all data .....for me this system works
videobelu said:
...try this ...intead of softreset shut down the prophet and than turn it on again.....seem that wm6 not save all data .....for me this system works
Click to expand...
Click to collapse
strange,even Microsoft already said that starting from WM5.ROM will be used to save data..so,it must be NON-VOLATILE...
really,i'm surprised that WM6 ROM is back to "StoneAge" if it is about saving data...
Smart1 should fixed this problem on v3
dmc3 said:
strange,even Microsoft already said that starting from WM5.ROM will be used to save data..so,it must be NON-VOLATILE...
really,i'm surprised that WM6 ROM is back to "StoneAge" if it is about saving data...
Smart1 should fixed this problem on v3
Click to expand...
Click to collapse
..yes strange but works also for wifi and bt setting..........................
I created some subfolders in my pushmail account (Mail2Web.com) in the Messaging tool, like "PPC Things" or "Private" but when I softreset my device (XDA Neo, G4) the mails in this subfolders where be deleted!!!
But when I look into my mail account via Firefox at PC I see them all in the right subfolders! :-?
Is it a bug or feature?
How to resolve this issue?
TimeZone
What about fixing the timezone prob ?
timezone is not a big problem.right now,if smart1 doesn't fix this "Volatile"-problem,this ROM is just a waste...
uccoffee said:
1: Button 1 & 2 are not customizable ( to me , this is very very very very very very important, I change back to WM5 Maybe you just need another hardreset.
....
Click to expand...
Click to collapse
Did this issue of button mapping ever get fixed in Smart v2? I don't believe this was ever corrected in ANY of the aku 3 WM5 ROMS either.
whats button mapping? i don't get it?
Well, let me explain. This is the single biggest issue I have with all the WM5 aku 3 and WM6 ROMs so far, and I doubt it will ever get fixed for any new ROMs. This is also what keeps from updating my prophet to anything higher than aku 2.2.
Buttons 1 and 2 correspond to the lower left Windows key and the OK key on the lower right. When you go into the control panel, you see 'buttons'. Here, you can assign a different function to these 2 buttons in addition to buttons 3 and 4 (camera and conn manager by default). In all these latest ROMs, you can ONLY change buttons 3 and 4. Changing the function of buttons 1 and 2 will not work for some reason.
Using Wisbar Advance 2, I use buttons 1 and 2 for the Cascading Start Menu and Close, respectively. However, this won't work for aku 3 ROMs and WM6 ROMs......at least not yet! aaarrrrggghhhh!
not a problem....i often use both of them..
Huh? What do you mean you use both of them?
Of course you can use them, but for no other purpose than the default start menu and the minimize functions.
If you're saying they CAN be changed, try changing one to the calculator and see if it works....
Bugs
I recently installed the Smart1's WM6 ROM v2 - overall very nice, much faster than my original WM5 ROM.
Few problems:-
1) Password - Seems to forget password, constantly says incorrect password entered. Only solution - hard reset.
2) MMS - Can send but not receive - sometimes cannot send either. Keypad lights up as if it is going to receive but no notification appears.
3) WiFi - Sometimes forgets WPA-PSK and actual network for that matter.
4) Sometimes when shutting down, the screen gets corrupted.
Also had a lot ofproblems getting it to work in the first place. I do understand that it isn't an official ROM, just thought it fair to make a point of this, hopefully complete noobs will avoid it as I suspect many will end up with nice rounded black bricks
Im Using PDA Mobiz 1.00 v1, All seems fine, Cant change Buttons 1 & 2 but no need for me.
I thought we were going to have HTML Emails in WM6? MS Demo shows it - doesnt seem to work for my Push emails?
Also my Radio version is 2.20.21, should i update this to teh 2.6 something or if it works dont mess with it?
JC
JCnME said:
Im Using PDA Mobiz 1.00 v1, All seems fine, Cant change Buttons 1 & 2 but no need for me.
I thought we were going to have HTML Emails in WM6? MS Demo shows it - doesnt seem to work for my Push emails?
Also my Radio version is 2.20.21, should i update this to teh 2.6 something or if it works dont mess with it?
JC
Click to expand...
Click to collapse
yes..i also think that PDA MobiZ Fantastic Xbow is still better than V2
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
Click to expand...
Click to collapse
I had this problem with the 1413 build, but not since going to the new 318 setup.
mattk_r said:
I had this problem with the 1413 build, but not since going to the new 318 setup.
Click to expand...
Click to collapse
Where I can download it from???
Hikari said:
Where I can download it from???
Click to expand...
Click to collapse
there many roms now build on 318
have a look and you will see
its right said:
there many roms now build on 318
have a look and you will see
Click to expand...
Click to collapse
Hmmm but my rom is 5.2.318 (build 15341.4.0.01)
I tracked that down as being a problem with radio signal strength. Every time the radio signal strength changed it would wake up the phone. That was annoying, but I never found a fix for it since I upgraded to a different to a different ROM that doesn't have that problem. It may have been a problem caused by BatteryStatus's signal strength monitor though rather than the ROM's because it didn't start until I installed BS if I remeber right.
just lock the phone
before put the wizard in sleep mode. then it doesn't wake up when you dont neeD it
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
don't use a windows mobile password in WM6 (start -> settings -> lock). for mee it makes the phone wake up often. if I remove the password it doesnt wake up automaticly any more
hmm
maybe theres a ghost inside your wizard loll
I had a ghost in my wizard once, had it exorcised, and then it moved into my car. Now my car starts on its own!
Indeed I have a password. Furthermore I noticed that at the outset (WM6 + all software I'm using) the problem didn't exist at all. I think that it started after hard reset + system restore (spb backup).
I did some hard reset, but unfortunately the problem still exist (at least I think so, but today I will check it more thoroughly) HELP!
Here's what I would do if I wanted to keep my current rom - assuming it didn't have this behavior before (I've been known to be excessive at times ):
Back up your phone with something like PIM Backup or whatever you prefer - don't forget your themes, pictures, whatever.
Do a hard-reset.
Test for this symptom before installing any applications.
If the symptoms exist, try a different radio, if not, install BatteryStatus and test again.
Continue until you find the culprit.
Might take a while, but you should be able to find the issue...
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
Click to expand...
Click to collapse
I don't need to know the reason - I just need a solution?
BTW which one is the best WM6 ROM for wizard now?
The problem lies on having a both a password set and backlight settings on. Either remove the password or turn off the "turn off backlight if device unused for..." setting. It solved the problem for me!
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Hikari said:
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Click to expand...
Click to collapse
If you need a password, then you'll have to go back to WM5. If you just want a password because you want to protect some files, then you should look into encrypting those files.
I hope that there is some way/there will be some rom to support device lock for Wizard's WM6
some WM6 roms seem to work with password.
I am still on a 'old' rom Wizard Reloaded 1.5 and there I can enable the password without waking up problems.
Just try with any rom, if it wakes up, remove the password. I suppose that's not such a big problem for most of us...you can still use Mobile Justice
I hope someone will find the exact cause (regkey probably) of this waking up problem, so any further roms wont have the problem anymore...
Hello out there,
since WM6 is available for my Qtek 8310 I would like to update to WM6.
After a short look here in the board, I see a couple of threads "Release WM6 .... "...
My question now is; Which release I should take? In other words, which one is the "best" ?
Thanks in advance,
Kesa
You should consider these 2
Andot PEE or HTC Edition
Basically HTC Edition is based on Andot PEE with some HTC themes and stuffs only
please apologize my bad english
So the HTC Edition has more stuff ? this one ?http://forum.xda-developers.com/showthread.php?t=321408
If yes... there's written under "removed" "office mobile" and so on... but what if I want office mobile or for instance the windows wireless manager ?
office mobile is removed coz you can install it yourself via the cab file into the storage card, saving up space on your main memory, same applies to the remove stuffs
okey understood
Well... If I take the Andot PEE version, I can install by myself the apps I want? - and install the HTC Version's apps too ?
[GUIDE] Upgrading HTC Tornado to Windows Mobile 6
Karhoe's guide to convert a Tornado to WM6 can be found at :
http://karhoe.byethost33.com/index.php?option=com_content&task=view&id=21
I used this wonderful guide to convert my T-Mobile SDA to WM6 last week and it worked like a champ. Everything went well. I had two minor hick-ups that I was able to resolve with research on this web site. As Karhoe pointed out the Office cab files are included in the "Extras" donwloaded and used at the end of the upgrade process. I'm very pleased with the WM6 upgrade.
Everything seemed to have gone well using andot's WM6 PEE, but after a few hours, my backlight on my phone starts behaving badly. I set the backlight to turn off after 30 seconds, but it will just basically turn itself off after about 5-6 seconds without any type of dimming before turning off.
If I go back to power management and set the backlight time to something else, that setting will stick for about a few hours, and back to the same backlight problems mentioned above.
Anyone else have this? I followed karhoe's tutorial exactly, and everything works well besides the backlight issue.
Thanks.
nemesis202 said:
Everything seemed to have gone well using andot's WM6 PEE, but after a few hours, my backlight on my phone starts behaving badly. I set the backlight to turn off after 30 seconds, but it will just basically turn itself off after about 5-6 seconds without any type of dimming before turning off.
If I go back to power management and set the backlight time to something else, that setting will stick for about a few hours, and back to the same backlight problems mentioned above.
Anyone else have this? I followed karhoe's tutorial exactly, and everything works well besides the backlight issue.
Thanks.
Click to expand...
Click to collapse
Just Perform a Hard Reset and everything will be a treat
sugardad said:
Just Perform a Hard Reset and everything will be a treat
Click to expand...
Click to collapse
I think he is talking about this problem here
Follow the link for the resolution to your problem.
Exitao said:
I think he is talking about this problem here
Follow the link for the resolution to your problem.
Click to expand...
Click to collapse
Exitao, thank you very much. That was exactly the problem I was having and the registry edit seemed to have fixed it.
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
firsthtc said:
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
Click to expand...
Click to collapse
Search this forum for thread's called iGO and WM6.1.
The answers are in those posts.
Kyphur, use ur hammer...
firsthtc said:
I installed Dutty ROM Duttys_Official_WM6.1_Rom_5.2.19716_UC si radio KAIS_Radinly_1.64.08.21, also iGo installed. I can't use my iGo program because when I try do detect the GPS chip from statellits connection page the PDA freeze when discover it (i can see this because the GPS led turns on). I can tell you that I update already the position using QuickGPS and after that GPSTool I can connect to sattelits. What shoud I do?
Thanks a lot
Click to expand...
Click to collapse
Disable the HTC Home clock and see the IGO program work like a charm.
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
jarek91 said:
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
Click to expand...
Click to collapse
WTF is up with you. LMFAO. Now you're a poet? LOL
jarek91 said:
You did not read.
You did not learn.
You started a new thread
And for that you must burn.
This goes in the thread
For the ROM that you mentioned
This thread will be locked
And you sent to detention.
There's a link in my sig
In that nice quote from Alex
You need to go watch it
To avoid violent malice.
Click to expand...
Click to collapse
Too much thought went into that Jarek.
Still LMAO though.
I searched, and searched again, and again... no fix for me
I don't want to eat your time... but my iGo still not work. I don't have HTC Home active... I tried even to enable and after that disable this function, but... no result...
This is serious...I can't use my GPS with iGo program....Any suggestion or fix?
Thanks again
firsthtc said:
I don't want to eat your time... but my iGo still not work. I don't have HTC Home active... I tried even to enable and after that disable this function, but... no result...
This is serious...I can't use my GPS with iGo program....Any suggestion or fix?
Thanks again
Click to expand...
Click to collapse
Go Here
http://forum.xda-developers.com/showpost.php?p=1956279&postcount=2328
And If you have more questions maybe put it in the relevant thread. HERE
Also I think you may have a burned up GPS chip. Try a different GPS program. GPSTest or something. But It would be better if you posted in the Thread that deals with Problems in the rom you are using.
two suggestions:
first: see if u have a-gps enabled. if so: disable and try again
second: try another rom... find one that's best for you.
i dont see how htc home plugin can affect this because i tested all possible combinations w&w/o it enabled and nothing changed. I had the same issue, igo freezing with dutty's wm 6.1 ROM when configuring and turning off assisted gps helped, as stated above.
My GPS worked fine with iGo until I changed the ROM (I had Dutty's ROM nr. 4). And that link that you give me, Jimmy, is related to HTC Home. I don't use it, like I said before.
Help please...
Still no answer... any ideea? Thanks
firsthtc said:
Still no answer... any ideea? Thanks
Click to expand...
Click to collapse
I'm not sure it's a ROM problem. iGo 6 itelf seems to have a problem dealing with AGPS. Mine also freezes after a while if AGPS is turned on.
I just leave it off and everything seems to work fine.
/drt
one thing i did was turning off the igo today plugin..and reboot..that should partially remove the conflict..
There are actually three different kinds of iGo problems I've seen with the various ROMs I've tried:
- Installation won't complete. Often, iGo will run anyway if you just do a soft reset when the installation halts. Often it won't.
- iGo runs, but once configured to find the GPS COM port, it hangs and hangs every time it starts after that. It may be related to AGPS, but I've seen this in ROMs that do not have that enabled by default. Also, I have no data plan and, as a result, no data connection with the tower.
- iGo installs, but won't start at all. Trying to start it results in a little screen opening animation, but nothing appears. The device is sluggish for a moment, then it's as if you never attempted to start it at all. This is the problem I have with Dutty's latest ROM. This almost certainly not related to AGPS since iGo has no GPS configuration immediately after installation. I don't believe it is related to the HTC Home plugin, since iGo runs fine for me on the AT&T test ROM, and it has the plugin.
sinanju said:
- iGo installs, but won't start at all. Trying to start it results in a little screen opening animation, but nothing appears. The device is sluggish for a moment, then it's as if you never attempted to start it at all. This is the problem I have with Dutty's latest ROM. This almost certainly not related to AGPS since iGo has no GPS configuration immediately after installation. I don't believe it is related to the HTC Home plugin, since iGo runs fine for me on the AT&T test ROM, and it has the plugin.
Click to expand...
Click to collapse
This is definitely a conflict with the music tab of HTC Home, but only on some 6.1 ROMs (curiously not build 716 though). This problem doesn't occur in any 6.0 ROMs that I know of. It's not the plugin per se, but some component of the Today screen configuration that's causing the problem.
rob.ocelot said:
This is definitely a conflict with the music tab of HTC Home, but only on some 6.1 ROMs (curiously not build 716 though). This problem doesn't occur in any 6.0 ROMs that I know of. It's not the plugin per se, but some component of the Today screen configuration that's causing the problem.
Click to expand...
Click to collapse
Is it sufficient to uncheck the plugin in the Today configuration and soft reset or is something more drastic required to resolve the conflict? The instructions linked to in an earlier posting seemed more like a series of black magic steps that happened to work.