USB Sync Problem - Touch Cruise General

Hi, I'v received a second hand HTC Cruise, locked to SFR and in French, I want to unlock and chenge to English. I read al lot these days trying to unlock it but it seams that the USB port is disabled, active sync is not working and when I plug the USB cable the PC does nothing (not even recongize that something is in that port)
The HTC Ext seem ok the previos owner never synced but headphones are ok, charging also.
I'e tried several method to acces the device via USB with no results, seems that the only posible solution is by so called HTC GOLD CARD or a HTC DIAGNOSTICS CARD so i can change the ROM from a SD CARD since I can not access the device via USB
I also went to the four colors boot loader screen and try to sync from there but no results.
Bootloader Info : (red zone)
POLA100
SPL-1.25.0000
CPLD-2
(white zone)
Serial by default
USB when I plug the USB Cable
My HTC Cruise data is
Vers SFR_V3650
ROM VERS : 1.25.163.9 FRE
ROM DATE : 06/18/08
RADIO VERS : 1.58.21.54
PROTOCOL VERSION : 25.63.30.04H
What can I do? How should I proceed to change my ROM
Thanks in advance.
PS : I've try ActiveSync with two cables in two diferent PC always the same result, the PC dont even sees that the device is on.
Is there any kind of program or tool to see if the port is enabled and working fine?

Related

help about boot screen in my uni (jasjar)

my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
I assume you have read the following 2 links? If not, read them now and follow the instructions very carefully.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I had the same problem as you, and was able to restore my Uni with a new ROM using the second link.
But the first problem is getting your PC to stop displaying "USB device not recognized", unfortunately this is quite difficult and I actually didn't manage to do it with my main PC! I had to use an old laptop with USB 1.1 and only then it worked fine, after installing Activesync 4.5.
Basically the Uni sucks full 500mA out of the USB port, so try unplugging ALL other USB devices from your PC first, and if that doesn't work then you will have to try another PC. Some work better than others, maybe you have an old laptop lying around which has at least USB 1.1, or could use a friends PC?
Don't bother hard resetting any more, in this state you can only do normal reset and enter bootloader mode. You will have to try combinations of this whilst plugging it into the PC, and also try different USB ports. Also try entering bootloader mode whilst the Uni is plugged into PC, and try without and plugging it in after.
If you manage to get the device recognized in device manager, and the display change to USB, then follow the instructions in the Wiki above and your device will be restored.
And make sure to flash a ROM that does not include a new IPL/SPL, that means don't use any network default WM5 ROM!!! I used Tomal's 8.0, I recommend that when flashing to recover your device.
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
yasoo157 said:
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
Click to expand...
Click to collapse
can u tell me how u got ur uni working again im still stuck at the screen where it says press x to restore defaults and 0 to exit????
jasjar died
I have exaclty the same problem with my jasjar. help!!! usb is not working .....and how can I find Tomals 8.0 ......

USB connection is broken

Hi!
i have a realy ****ty problem:
The USB Connection of my TyTN2 is broken. I can't get connected to Active Sync.
USB is not recognized when connecting to PC. The Akku is not charging (also when using the AC/DC-Connection).
The only way to charge the Akku is powering the PPC off.
Any ideas what to do (expect returning the Device to HTC)???
Edit: Flashed back orginal ROM downloaded form the HTC webside using microSD
but im not sure if it has flashed back EVERYTHING to orginal (even the SPL)???
Edit2: ok is there a way to flash the SPL from microSD? CustomRUU can't connect either (loading SPL-1.JumpSPL or SPL1.0.OliPof)
Thanks for your help.

[Q] Samsung Focus PC Connectivity Problem(Whatever I did)

Hi dear friends,
Recently ı bought Samsung Focus from ebay, with 7004 RTM version. Here is things in order to connect pc.
-Install/Unistall Zune (i think it was 4.8.5 or something)
-Tried with different port of USB
-Tried with different usb cable
-Tried on different PC
-Tried to change ROM of phone but WP7 Downloader ver 7.41 couldnt see my phone on COM5 port
-Install/Unistall Samsung USB Drivers
When I connect to pc, my phone is only charging nothing much.
Thanks for the answers...
First thing to do before connecting to your PC
Follow the instructions mentioned on the link..You should be able to crack it
http://www.pcworld.com/article/210394/samsung_focus_hack_enables_windows_phone_7_tethering.html
thanks but i've already done three of them, none of them worked (

Phone not detected by PC yet charges?

HTC One S4
Alright, I've looked into this for quite a bit. There's 3 things I've found:
- Change charging cable (done)
- Install HTC Sync (done)
- The USB connector port on the phone could be broken (hope not)
Anything else I can look into?
- Rom is ViperOneS JB
I believe I've tried ADB devices, I haven't really done any sort of ROM changing so I've forgotten much of this, but I believe ADB devices doesn't show any available devices.
EDIT: Another thing to add is that the PC recognises the phone when in CWM but doesn't mount the device such that I can access the files.
EDIT 2: I tried Fastboot USB, only comes up as Fastboot AC :/
Another thing: I charge my phone using a dodgy eBay USB cable, I didn't use this for connecting to the PC but whenever I plug in the charger the phone says to unlock in order to access files on the PC (as it would if my PC detected the phone).
Sorry to sound desperate but I need a response, fast!
Uninstal htc sync.
Instal latest HTC drivers & adb.
PS
Windows 8.1 have a problem with driver.
It says the device connected to the PC has "malfunctioned". I deleted HTC Sync, haven't updated ADB cos I can't remember the link.
Installed latest adb, no avail.
http://forum.xda-developers.com/showthread.php?t=2217396
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
I already have those.
Anyone at all know anything?
Bump :/
It does say unlock to access phone storage on computer and then when I do, nothing happens.
I have the same issue, and I've tried to access my One S from multiple computers (different usb ports, 2.0, hub, et.c., Windows, OSX, Linux) and nothing seems to do the trick. I'm completely locked out from switch recovery (TWRP installed but can't be accessed, possibly due to old 1.13 hboot).
Sorry not to be able to offer any help, just that I doubt it'll be fixed in your case by switching computers/os/ports et.c. since I've tried most of that already, and I must've been through 10-12 different usb cables by now.
Just about ready to ditch this phone.
Flash the original recovery.

[Q] How to connect HTC Inspire 4G to PC / repair Android OS ? (Plz read Description)

Hey there, I'm having problem connecting device to Computer... I have tried different data cables and OS... I thought that the problem is with the drivers but I wad wrong... I think that the problem I with software of my mobile... I have an old version of HTC Inspire 4G which have about 1 GB internal memory and 601 MB of RAM and Android 2.3.5 running on it... I updated my phone by a dial code which was MAY BE *#*#462#*#* ... The new version of HTC Inspire 4G has 3 GB internal memory... when I connect my device to Computer, it shows the error that The Device is not recognized, and my phone only do charging when connected to Computer... I also noticed that when I connect phone with AC adaptor to charge, it shows "Charging (AC)" status in Settings >> About Phone >> Battery Status... and when I connect my device to Computer, it shows the "Charging (USB)" status... someone told me that the problem is with the charging port so I changed that port tomorrow but the problem is still the same... also note that I have also tried HTC sync which installs drivers automatically but it also didn't work... other 3rd party softwares which install drivers were also of no use... now you may think that I haven't tried by changing "Connect to PC" settings, but I have tried all of these also... I also have tried connecting to Computer running on Ubuntu Linux, but it doesn't respond... at the last, I came with the conclusion that the phone's software has the problem... it recognises when I connect my phone to Computer but I don't connect as a Disc Drive or to HTC sync... may be the solution will be to repair my phone's OS... but it is not rooted and bootloader is also locked... I think that an Android Developer will answer this correctly... thanks in advance and sorry of my bad English...

Categories

Resources