[Q] Samsung Focus PC Connectivity Problem(Whatever I did) - Windows Phone 7 Q&A, Help & Troubleshooting

Hi dear friends,
Recently ı bought Samsung Focus from ebay, with 7004 RTM version. Here is things in order to connect pc.
-Install/Unistall Zune (i think it was 4.8.5 or something)
-Tried with different port of USB
-Tried with different usb cable
-Tried on different PC
-Tried to change ROM of phone but WP7 Downloader ver 7.41 couldnt see my phone on COM5 port
-Install/Unistall Samsung USB Drivers
When I connect to pc, my phone is only charging nothing much.
Thanks for the answers...

First thing to do before connecting to your PC
Follow the instructions mentioned on the link..You should be able to crack it
http://www.pcworld.com/article/210394/samsung_focus_hack_enables_windows_phone_7_tethering.html

thanks but i've already done three of them, none of them worked (

Related

USB Sync Problem

Hi, I'v received a second hand HTC Cruise, locked to SFR and in French, I want to unlock and chenge to English. I read al lot these days trying to unlock it but it seams that the USB port is disabled, active sync is not working and when I plug the USB cable the PC does nothing (not even recongize that something is in that port)
The HTC Ext seem ok the previos owner never synced but headphones are ok, charging also.
I'e tried several method to acces the device via USB with no results, seems that the only posible solution is by so called HTC GOLD CARD or a HTC DIAGNOSTICS CARD so i can change the ROM from a SD CARD since I can not access the device via USB
I also went to the four colors boot loader screen and try to sync from there but no results.
Bootloader Info : (red zone)
POLA100
SPL-1.25.0000
CPLD-2
(white zone)
Serial by default
USB when I plug the USB Cable
My HTC Cruise data is
Vers SFR_V3650
ROM VERS : 1.25.163.9 FRE
ROM DATE : 06/18/08
RADIO VERS : 1.58.21.54
PROTOCOL VERSION : 25.63.30.04H
What can I do? How should I proceed to change my ROM
Thanks in advance.
PS : I've try ActiveSync with two cables in two diferent PC always the same result, the PC dont even sees that the device is on.
Is there any kind of program or tool to see if the port is enabled and working fine?

problem - connection/sync with PC

Hi, for few days when I installed first modified ROM into my TP i noticed that I have problem with connection and synchronisation. When I connect device via USB and set sync pda is connecting and disconnecting. The same problem with connectin via storage. I don't know why I can't establish connection via USB and BT ... I tried few differend ROMs, differend RadioROMs and it didn't help. I checked connections options, tried HR after updating new ROM and nothing helped ... Is this problem possible because of updating HardSPL? I didn't notice that problem when I had oem ROM, because I haven't got usb cable. FYI i tried 4 ROM from Energy and one PROven ROM by qsqa (PLK rom). Could someone help me?
PS: I don't have problem with charging my device and option 'charge when connected to PC' is on.
May be the problem in your PC, try download fresh ActiveSync (XP or older) or Windows Mobile Device Center (Vista or newer) from Microsoft site, then install it..
It does not help ;/

[Q] HELP - Pc does not recognize Nexus, Error 103

Hi guys, I can't undertand why my PC now does not recognize my Nexus, is like I haven't the driver, but it is ok because it always worked fine until now...
Now, if I connect it, PC charges my Nexus but not for USB storage...It's as PC can't see the phone...
The problem is not PC because I tried on 3 different PC...I also tried to change cable and USB port...
USB debugging into developer option is on.
So I tried to install again PdaNet, but when I should connect the device, I have an Error 103, like in the picture below.
Anybody has got this problem or know a solution? I don't know what to do, help me I'm hopeless!!!

Phone not detected by PC yet charges?

HTC One S4
Alright, I've looked into this for quite a bit. There's 3 things I've found:
- Change charging cable (done)
- Install HTC Sync (done)
- The USB connector port on the phone could be broken (hope not)
Anything else I can look into?
- Rom is ViperOneS JB
I believe I've tried ADB devices, I haven't really done any sort of ROM changing so I've forgotten much of this, but I believe ADB devices doesn't show any available devices.
EDIT: Another thing to add is that the PC recognises the phone when in CWM but doesn't mount the device such that I can access the files.
EDIT 2: I tried Fastboot USB, only comes up as Fastboot AC :/
Another thing: I charge my phone using a dodgy eBay USB cable, I didn't use this for connecting to the PC but whenever I plug in the charger the phone says to unlock in order to access files on the PC (as it would if my PC detected the phone).
Sorry to sound desperate but I need a response, fast!
Uninstal htc sync.
Instal latest HTC drivers & adb.
PS
Windows 8.1 have a problem with driver.
It says the device connected to the PC has "malfunctioned". I deleted HTC Sync, haven't updated ADB cos I can't remember the link.
Installed latest adb, no avail.
http://forum.xda-developers.com/showthread.php?t=2217396
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
I already have those.
Anyone at all know anything?
Bump :/
It does say unlock to access phone storage on computer and then when I do, nothing happens.
I have the same issue, and I've tried to access my One S from multiple computers (different usb ports, 2.0, hub, et.c., Windows, OSX, Linux) and nothing seems to do the trick. I'm completely locked out from switch recovery (TWRP installed but can't be accessed, possibly due to old 1.13 hboot).
Sorry not to be able to offer any help, just that I doubt it'll be fixed in your case by switching computers/os/ports et.c. since I've tried most of that already, and I must've been through 10-12 different usb cables by now.
Just about ready to ditch this phone.
Flash the original recovery.

Galaxy S6 not recognized on PC or ADB

Dear,
My Galaxy S6 SM-G920F with lollipop 5.1.1
AP : G920FXXU2BOG8
CSC : G920FOJV2BOG8
has stop being recongnized by pc, i almost tries anything i know and find on net.
The pc doesn't recongnise it on device manager (i have a win 7 pc), the phone however react as pluged in a charger.
their is no mtp or mass storage switch on notification.
i have reinstall the driver of samsung several times with smart switch & also made it manual by suppressing directrly the samsung usb driver from programs on control panel then reinstall it but no hope.
I can't figure out eitheir its hard or soft.
i had change my cable & also test my pc with another Galaxy s6 it works fine, but mine no.
i have made wipe cache / factory reset also made an initialisation from parameters the phone is formated but not recognised by the pc also test it on another pc but the same behaviour windows pcs doesn't recognise my phone.
However, i figure out that when its on the restore mode (volume down + lock + home) the pc recognise it by Odin and smart switch.
i install the same rom on it also made an emergency restore with S/N and model and the process completes fine with smart switch and i saw the donwload progress bar completing on my phone.
but still i m stuck its not recognised please help !!!
i tries to use *#0808# and its on AP / MTP + ADB but no hope
i plug it on ADB android studio but the device list is empty :'(
Try installing latest version of Kies to install updated Samsung drivers.
roydok said:
Try installing latest version of Kies to install updated Samsung drivers.
Click to expand...
Click to collapse
I m having both the latest SmartView & Kies 3
i have done as asked but still no usb detection even after reinstalling usb driver
Try using a different USB cable or different USB port.
roydok said:
Try using a different USB cable or different USB port.
Click to expand...
Click to collapse
i used different cables and pcs but still not recognised
yesterday i used odin with those options :
BL/AP/CP/CSC and checked
Auto-reboot
F.reset Time
phone EFS Clear
Phone bootloader update
it has taking some while to execute but after that my phone was working and detectable again by my pc the problem was resolved for a couple of hours, in the evening the problem occured again.
and i have tried the process again the same why but no connection at all.
i don't know if its a hardware problem or software related problem
because the usb work when i m in restore mode (Odin mode) otherwise no.
Its an advance problem i already check all about usb / cable and pcs related problem.
Problem resolved
I sent my S6 to Samsung SAV it take them 4 days.
they doesn't give me proper answers on what they have done but i saw that my mini-usb plug is new so i expect that they got this part changed accrodingly the samsung has no sign of damage its a clean operation.
Its now detectable. It was indeed a Hardware problem
i have the same issue but in a g928f
today i changer my lcd with the micro usb flex
so all is new except the main board and still is not recognised at any pc with any cable.
i am really starting to feel very sorry for this phone.
odin does not see it at all even at download mode.
i don't know what else to do.
Software or Hardware Issue
I have a s6 920t that I am suppose to pay for at the end of the day. I got it from a friend who bought it while overseas. The only time my computer detects it is in download mode/odin mode, I hear the sound and I see it as "Added". When I try to connect any other way I don't hear the sound my laptop makes when it has detected a new device also otg cables don't work. I just simply want to know if this a software or a hardware issue? Software I can fix but if it is hardware I don't want to waste my money. Please anyone reply as soon as you can so I can decide what to do.
Thank you
I have two S6 Edge and one of them started doing this (phone only appears on USB when in Download mode). When swapping the motherboard between the phones, it works. So the problem isn't with the motherboard, but the USB connection module attached with the ribbon cable... There must be a chip on the module which gets locked somehow and replacing the board is at least one way to fix it. Hopefully someone finds another method without replacing the charger board?

Categories

Resources