my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
I assume you have read the following 2 links? If not, read them now and follow the instructions very carefully.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I had the same problem as you, and was able to restore my Uni with a new ROM using the second link.
But the first problem is getting your PC to stop displaying "USB device not recognized", unfortunately this is quite difficult and I actually didn't manage to do it with my main PC! I had to use an old laptop with USB 1.1 and only then it worked fine, after installing Activesync 4.5.
Basically the Uni sucks full 500mA out of the USB port, so try unplugging ALL other USB devices from your PC first, and if that doesn't work then you will have to try another PC. Some work better than others, maybe you have an old laptop lying around which has at least USB 1.1, or could use a friends PC?
Don't bother hard resetting any more, in this state you can only do normal reset and enter bootloader mode. You will have to try combinations of this whilst plugging it into the PC, and also try different USB ports. Also try entering bootloader mode whilst the Uni is plugged into PC, and try without and plugging it in after.
If you manage to get the device recognized in device manager, and the display change to USB, then follow the instructions in the Wiki above and your device will be restored.
And make sure to flash a ROM that does not include a new IPL/SPL, that means don't use any network default WM5 ROM!!! I used Tomal's 8.0, I recommend that when flashing to recover your device.
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
yasoo157 said:
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
Click to expand...
Click to collapse
can u tell me how u got ur uni working again im still stuck at the screen where it says press x to restore defaults and 0 to exit????
jasjar died
I have exaclty the same problem with my jasjar. help!!! usb is not working .....and how can I find Tomals 8.0 ......
Related
Is there a way that I can't flash new room to my G3 because some how the usb connection of my device doesn't work no more. It only charges the device. If I plug it into windows it say my device is unrecognized. Plz help me.
Try to see if it is still recognized as Unknown Device in bootloader mode (Camera mode)
If so, you need another good Wizard to create SD image using r2sd in mtty, then restore to your Wizard by pressing Voice button and reset.
Dear All Frenz..
Could anyone help me to solved this Problem? Currently
# on The Device
I already unchecked the Box for Advance network on USB Setting, Finally on The Actvesync connection menu, I checked the box of 'Synchronize all PCS bla bla.... '
# on the Laptop
I have Installed actvesync 4.5.0
When I tried to connect the Device to Laptop using USB Cable, anything Doesnt happen. The Icon of Activesync on Laptop screen did not give response (no flashing showing ).
But The Battery Charging running well as long as the Cable connected.
Maybe there is any procedure that I Have not tried yet.. Please tell me..
Do you have firewall??
Bulldog said:
Do you have firewall??
Click to expand...
Click to collapse
Yup Bro..
I hv the Fire wall in my LT and I Already
disable it,but didnt give any response
sorry becouse i have not given yet the information as below :
My Device has just been format, becouse I cannot access to Windows at the time of Turn on device. Before the windows problem happen, I didnt find a connection failed ( always success evry time physical connection began), but after format the connection problem appears. The LT cannot detect device evry time the cable already plug in to LT.
Please give me more advice.
Highly appreciate for your support
tommyx21 said:
Yup Bro..
I hv the Fire wall in my LT and I Already
disable it,but didnt give any response
sorry becouse i have not given yet the information as below :
My Device has just been format, becouse I cannot access to Windows at the time of Turn on device. Before the windows problem happen, I didnt find a connection failed ( always success evry time physical connection began), but after format the connection problem appears. The LT cannot detect device evry time the cable already plug in to LT.
Please give me more advice.
Highly appreciate for your support
Click to expand...
Click to collapse
tommyx21.. If I did understand you correctly..You had a Windows problem on your Laptop then you reformate it... then your problem with not able to connect your LG to Laptops began isnt???
When you plug in your LG to your Laptop do you see any sign of been connected as USB device? Have you reinstall the ActiveSync.
Bulldog said:
tommyx21.. If I did understand you correctly..You had a Windows problem on your Laptop then you reformate it... then your problem with not able to connect your LG to Laptops began isnt???
When you plug in your LG to your Laptop do you see any sign of been connected as USB device? Have you reinstall the ActiveSync.
Click to expand...
Click to collapse
I Hv format my LGKS20 device, not my LT Boss
for acouple time after format, i can see the sign with the" not recognize" notification (asking for driver). But After that My LGKs20 cannot be detected by LT anymore..
I hv tried to connect my device to PC, but it not given any change too...
I hv already tried to reinstall Actvesync and it given nothing...
any other suggestion boss? or maybe i must try to change my Connection cable with the new one..?
i upgraded to tomal's rom to give it a try, and it works great, problem is i can't remove the rom....mtty tool doesn't work cause everytime i connect to xp, vista don't matter about 10 cords it always say usb unrecongized and when i do the ruu...i get a error so i was going to try the mtty but i can't even connect the universal to the damn pc, in bootloader it goes from serial to usb when you connect that works, but u see it connect to the pc for like 2 secs then the usb unrecongizeable any help i'm tired of reading all these treads....thanks in advance
bty mtty tool only shows com1 and com2 no usb at all
I found out what it was, i had to go in to safe mode and when i plugged it back in i hurry up and stop the auto update, looked in device manager and there it was *** pocket usb sync **** before i couldn't see it now i followed the post on upgrading using vista no problems thanks!!
Mods
Can delete this thread please?
My htc cruise doesn't connect to any computer. I can recharge it by usb cable but i can't syncronize. What can i do? i would like to install wm6.5 but i can't because there are only kitchen rom and i can't install hard spl. Can someone help me? Thanks.
aurafis said:
My htc cruise doesn't connect to any computer. I can recharge it by usb cable but i can't syncronize. What can i do? i would like to install wm6.5 but i can't because there are only kitchen rom and i can't install hard spl. Can someone help me? Thanks.
Click to expand...
Click to collapse
if you cant install HardSPL then you cant use custom roms nor install wm6.5 unless its made by HTC...
if its not recognized by any PC...check cable/PC...else send it to repair...
have you tried Hard Reseting device?
Thank you for answer. I tried hard reset, i flashed by microsd with htc rom, the device run, i can recharge, i can syncronize by bluetooth but any computer doesn't connect to it. It seems as if it hasn't some drivers.... i don't know.For a while i could syncronize it by usb cable.
And can i try to install another program to syncronize in the device?
hi there,
I think i have the same problem with my Diamond..
If the flashing to another Rom won't help the solution, it could be that it's a pin problem where it connects with Ur cable, what I've read in several posts on this forum. And that's what my problem is, what I find more significant 4 my problem
I had the same issue, not all USB cables are made to allow connection with with PC. Change the cable ...
Dear,
My Galaxy S6 SM-G920F with lollipop 5.1.1
AP : G920FXXU2BOG8
CSC : G920FOJV2BOG8
has stop being recongnized by pc, i almost tries anything i know and find on net.
The pc doesn't recongnise it on device manager (i have a win 7 pc), the phone however react as pluged in a charger.
their is no mtp or mass storage switch on notification.
i have reinstall the driver of samsung several times with smart switch & also made it manual by suppressing directrly the samsung usb driver from programs on control panel then reinstall it but no hope.
I can't figure out eitheir its hard or soft.
i had change my cable & also test my pc with another Galaxy s6 it works fine, but mine no.
i have made wipe cache / factory reset also made an initialisation from parameters the phone is formated but not recognised by the pc also test it on another pc but the same behaviour windows pcs doesn't recognise my phone.
However, i figure out that when its on the restore mode (volume down + lock + home) the pc recognise it by Odin and smart switch.
i install the same rom on it also made an emergency restore with S/N and model and the process completes fine with smart switch and i saw the donwload progress bar completing on my phone.
but still i m stuck its not recognised please help !!!
i tries to use *#0808# and its on AP / MTP + ADB but no hope
i plug it on ADB android studio but the device list is empty :'(
Try installing latest version of Kies to install updated Samsung drivers.
roydok said:
Try installing latest version of Kies to install updated Samsung drivers.
Click to expand...
Click to collapse
I m having both the latest SmartView & Kies 3
i have done as asked but still no usb detection even after reinstalling usb driver
Try using a different USB cable or different USB port.
roydok said:
Try using a different USB cable or different USB port.
Click to expand...
Click to collapse
i used different cables and pcs but still not recognised
yesterday i used odin with those options :
BL/AP/CP/CSC and checked
Auto-reboot
F.reset Time
phone EFS Clear
Phone bootloader update
it has taking some while to execute but after that my phone was working and detectable again by my pc the problem was resolved for a couple of hours, in the evening the problem occured again.
and i have tried the process again the same why but no connection at all.
i don't know if its a hardware problem or software related problem
because the usb work when i m in restore mode (Odin mode) otherwise no.
Its an advance problem i already check all about usb / cable and pcs related problem.
Problem resolved
I sent my S6 to Samsung SAV it take them 4 days.
they doesn't give me proper answers on what they have done but i saw that my mini-usb plug is new so i expect that they got this part changed accrodingly the samsung has no sign of damage its a clean operation.
Its now detectable. It was indeed a Hardware problem
i have the same issue but in a g928f
today i changer my lcd with the micro usb flex
so all is new except the main board and still is not recognised at any pc with any cable.
i am really starting to feel very sorry for this phone.
odin does not see it at all even at download mode.
i don't know what else to do.
Software or Hardware Issue
I have a s6 920t that I am suppose to pay for at the end of the day. I got it from a friend who bought it while overseas. The only time my computer detects it is in download mode/odin mode, I hear the sound and I see it as "Added". When I try to connect any other way I don't hear the sound my laptop makes when it has detected a new device also otg cables don't work. I just simply want to know if this a software or a hardware issue? Software I can fix but if it is hardware I don't want to waste my money. Please anyone reply as soon as you can so I can decide what to do.
Thank you
I have two S6 Edge and one of them started doing this (phone only appears on USB when in Download mode). When swapping the motherboard between the phones, it works. So the problem isn't with the motherboard, but the USB connection module attached with the ribbon cable... There must be a chip on the module which gets locked somehow and replacing the board is at least one way to fix it. Hopefully someone finds another method without replacing the charger board?