My htc cruise doesn't connect to any computer. I can recharge it by usb cable but i can't syncronize. What can i do? i would like to install wm6.5 but i can't because there are only kitchen rom and i can't install hard spl. Can someone help me? Thanks.
aurafis said:
My htc cruise doesn't connect to any computer. I can recharge it by usb cable but i can't syncronize. What can i do? i would like to install wm6.5 but i can't because there are only kitchen rom and i can't install hard spl. Can someone help me? Thanks.
Click to expand...
Click to collapse
if you cant install HardSPL then you cant use custom roms nor install wm6.5 unless its made by HTC...
if its not recognized by any PC...check cable/PC...else send it to repair...
have you tried Hard Reseting device?
Thank you for answer. I tried hard reset, i flashed by microsd with htc rom, the device run, i can recharge, i can syncronize by bluetooth but any computer doesn't connect to it. It seems as if it hasn't some drivers.... i don't know.For a while i could syncronize it by usb cable.
And can i try to install another program to syncronize in the device?
hi there,
I think i have the same problem with my Diamond..
If the flashing to another Rom won't help the solution, it could be that it's a pin problem where it connects with Ur cable, what I've read in several posts on this forum. And that's what my problem is, what I find more significant 4 my problem
I had the same issue, not all USB cables are made to allow connection with with PC. Change the cable ...
Related
hello all,
i have no idea what has happened to my universal (imate jasjar)
i started upgrading to a new ROM, and then it got stucked on the bootloader. it only shows
USB (when connected to usb, or serial if not), V0.6 on the bottom of the screen.
i tried the ulock of the bootloader, (light, softrest, power), exitbootloader, but nothing worked.
when trying to use mtty it gives me an error (can not open usb).
i am using vista.
any help will highly appreciated
thanks a lot in advance
cheers
just to add one thing,
I NEED MY PHONE BACK.
pleeaase help me
I also got that USB-port problem trying to use mtty and UNI_exitbootloader.exe thoug i had disabel the USB-port in WMDC(I am using Vista ) so I tried a PC with XP and activesync. Same Problem. Then I tried to remove activesync. Same Problem.
Then I tried a PC with XP but where activesync had never been installed at. And this worked. Now I did see the USB in port menu in mtty.
Sara
sarasera said:
I also got that USB-port problem trying to use mtty and UNI_exitbootloader.exe thoug i had disabel the USB-port in WMDC(I am using Vista ) so I tried a PC with XP and activesync. Same Problem. Then I tried to remove activesync. Same Problem.
Then I tried a PC with XP but where activesync had never been installed at. And this worked. Now I did see the USB in port menu in mtty.
Sara
Click to expand...
Click to collapse
hello sara,
thanks a lot for ur feedback, unfortunatly, i don't have xp now. i will check out tomorrow.
thanks
replace your cable...i had the same issues and that solved them. hope it helps.
Use XP, disable ActiveSync and then connect USB to your PPC. Mtty will show USB. I did it thousand times. Tested and working!
Vista and ROM upgrading ... they don't mix.
For upgrading your ROMs or doing any such thing to your Uni, use XP.
Search the forum, there shoulod be post somewhere with the XP USB drivers attached, if I remember correctly, replacing the Vista drivers with those will probably solve the problem, but with Microsoft, you can never be 100% sure...
Hi all, i'm newbie, i have HTC XV6700 Verizon dead, when i connect to PC USB has been detected, but Unknow Devices, I'ts software or Hardware? If software what i must need to fix it? I'm sorry if my English not that so good.
Thanks B4
Newbie
brick...
ur pda was bricked in bootloader mode it should be display the serial , while you plug the usb to ur computer it wil be changed to usb, try to reflash by the rom of apache (you can find in this forum ). before that try to deactivate the usb connection on microsoft active sync menu.
awan2dreams said:
Hi all, i'm newbie, i have HTC XV6700 Verizon dead, when i connect to PC USB has been detected, but Unknow Devices, I'ts software or Hardware? If software what i must need to fix it? I'm sorry if my English not that so good.
Thanks B4
Newbie
Click to expand...
Click to collapse
MTTY
See this thread: http://forum.xda-developers.com/showthread.php?t=304408
Don't forget to disable the USB connection on your activesync first before you run the MTTY.
my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
I assume you have read the following 2 links? If not, read them now and follow the instructions very carefully.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I had the same problem as you, and was able to restore my Uni with a new ROM using the second link.
But the first problem is getting your PC to stop displaying "USB device not recognized", unfortunately this is quite difficult and I actually didn't manage to do it with my main PC! I had to use an old laptop with USB 1.1 and only then it worked fine, after installing Activesync 4.5.
Basically the Uni sucks full 500mA out of the USB port, so try unplugging ALL other USB devices from your PC first, and if that doesn't work then you will have to try another PC. Some work better than others, maybe you have an old laptop lying around which has at least USB 1.1, or could use a friends PC?
Don't bother hard resetting any more, in this state you can only do normal reset and enter bootloader mode. You will have to try combinations of this whilst plugging it into the PC, and also try different USB ports. Also try entering bootloader mode whilst the Uni is plugged into PC, and try without and plugging it in after.
If you manage to get the device recognized in device manager, and the display change to USB, then follow the instructions in the Wiki above and your device will be restored.
And make sure to flash a ROM that does not include a new IPL/SPL, that means don't use any network default WM5 ROM!!! I used Tomal's 8.0, I recommend that when flashing to recover your device.
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
yasoo157 said:
thanxxxxxxxxxxxxxxxxxxxxxxxxx my jasjar back a live thanx every one
Click to expand...
Click to collapse
can u tell me how u got ur uni working again im still stuck at the screen where it says press x to restore defaults and 0 to exit????
jasjar died
I have exaclty the same problem with my jasjar. help!!! usb is not working .....and how can I find Tomals 8.0 ......
I can t connect to a pc, i want an upgrade because this rom is not good
I tried to switch off advancednetwork funcionality but it didn t work,
Please Help!
Nobody doesn't know?
Some times my SDA cannot connect too; I fix it uninstalling ActiveSync from my computer and reinstalling it, also try in other computer. This work for my. good luck
Hi, for few days when I installed first modified ROM into my TP i noticed that I have problem with connection and synchronisation. When I connect device via USB and set sync pda is connecting and disconnecting. The same problem with connectin via storage. I don't know why I can't establish connection via USB and BT ... I tried few differend ROMs, differend RadioROMs and it didn't help. I checked connections options, tried HR after updating new ROM and nothing helped ... Is this problem possible because of updating HardSPL? I didn't notice that problem when I had oem ROM, because I haven't got usb cable. FYI i tried 4 ROM from Energy and one PROven ROM by qsqa (PLK rom). Could someone help me?
PS: I don't have problem with charging my device and option 'charge when connected to PC' is on.
May be the problem in your PC, try download fresh ActiveSync (XP or older) or Windows Mobile Device Center (Vista or newer) from Microsoft site, then install it..
It does not help ;/