Database Info

Qtek s200 update problems----important experience

HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy

2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy

UP
Guys please help me

another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy

try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).

thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..

Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete

Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy

jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298

Device Dead Please Help Someone.

Hi mates. i was using tnt series wm6 rom. and i just tried to upgrade to faria's rom using shell tool. and after non successful upgrading now. when i start my wizard it stuck on boot screen. with this info.
ipl : 3.08
spl: 3.08
Gsm : 2.19.11
OS : 2.18.0.0
i tried a alot installing original t-mobile shipped rom but it says the update utility is not for your device.
i tried a lot installing other roms using shell tool. but all return this screen. so please let me know. how i will completly flash this thing..
Kind Regards

Tell us smth more
Are you using Windows Vista on your PC.
If you do, do some search around to find how to update from Vista in Bootloader Mode, as Vista can not talk to the phone on that state
Aldo

thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.

ruk_design said:
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
Click to expand...
Click to collapse
My friend have you already done the reviving techniques included in this tut?:
http://forum.xda-developers.com/showthread.php?t=298613

G3 or G4 device?

Vox Italian official ROM needed - Vox Bricked.

Hi All,
I need an Italian Official VOX ROM or instruction how-to flash unsigned ROM.
Please note that I have flashed a wrong ROM and Activesync does not work, I can access only though bootloader.
Can anyone help me?
Thanks

Here is something you could try : http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Try naming the VOXIMG.nbh instead of HERMIMG.nbh.
but I really don't know if this can work. most likely not in fact since I haven't seen it described for the vox on these forums..
Sorry I have really no experience in bricked devices. Well I bricked mine several times but usb connection still worked through bootloader, so I could start ruu updater when in bootloader mode and it worked fine.

I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater, every time i go to flash a rom i get errors saying wrong VendorID etc... this is because the rom i flashed had different ID's to the original HTC ROMS. Maybe you are signing them different to me?
Please help!

Hi Doctor,
it does not work with VOX.

iceberg2403 said:
I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater ...
Please help!
Click to expand...
Click to collapse
i`ve made the same mistake (flashed a ROM cooked by me) ... but prior to flash my phone i was lucky enough to use USPL 1.16 to permanently flash my SPL to 1.16 (i`ve used both archives Vox USPL-CID BYPASS.zip and Vox-USPL-RUU.zip) instead of 1.27 (original, vendor locked).
On the XDA ftp is a italian ROM if i`m not mistaking, did you try it ?
try this ... i`m not sure it will work.
Make sure you have disabled the USB connection in ActiveSync:
File --> Connection settings --> uncheck "allow USB connections"
1. get into booloader mode
2. connect with mtty
3. write password BsaD5SeoA
4. try to run the USPL 1.16 now ... (i`m just guessing)
if it doens`t work reset the phone and repeat step 1. and 2. and continue with:
3. write password BsaD5SeoA after that ruurun 0
4. try to run the USPL 1.16 now ... (i`m just guessing)
alternatively instead of USPL you can try to run the italian rom from the ftp.
i`ve managed to save my phone doing steps 1, 2, and 3 (not sure which one worked) from above and then flashed with ARA ROM ... but keep in mind my SPL was 1.16.
hope this helps

I'm italian could I help you...
Hi i'm italian and i'm totally nwe on those things...eheheh i haven't yet underrstand what those cooked roms are..but I have an italian s710 with the original rom...with some software on it..If i could help.... let me know..maybe send me a PM or a mail through the forum mail system..
ciao ciao fammi sapere
bye bye just let'me know

with TheBo`s help the problem is almost solved :d

My intention was just to ask if a backup of my original HTC VOX (unbranded) could help...sorry...next time I will not do the same mistake.

SPL
Hi,
unfortunately this does not help because my VOX is CID locked “g_cKeyCardSecurityLevel = FF” and Activesync does not work, for this reason I’m not able to flash any unsigned rom.
My SPL is 1.27.
I have tried to flash 1.16 but the procedure does not work.
It is a way to CID unlock my VOX from bootloader?
Can anyone cook a signed Italian ROM?
Thanks.

maybe TheBo`s ROM will work for you

Nop,
it does not help until my VOX is unlocked...

alllof said:
Nop,
it does not help until my VOX is unlocked...
Click to expand...
Click to collapse
if the Vendor ID is the same it will work
my Y! ID is maxtry80, TheBo and alllof contact me there, maybe i can help you

If you would to help us you can try to cook a signed rom from the dump in ftp://xda:[email protected]/Vox/ (file name: s710 rom 1.15.408.2 (italian + uk eng + us eng).rar) or give to us instructions how to do it.
Thanks for your help.
Regards.

i`ll try to help you ... i`ll be back in couple of hours with results

Thanks for your help!

check you pm!

did it work?

i tried the method posted a while back with no positive results .... yet
I was just wondering, i looked at the bootloader and it says Vox SPL 1.15 so this is the version i am using and it doesnt let me flash another vendor id rom...

VOX Briched.
Nop,
it does not work. I have sent my device to HTC...

Can you tell me how it works out?? I am hesitant to send mine to HTC (i had to import this phone) which will mean i have to pay heaps for shipping... and even then i dont expect them to replace it because the last rom i flashed had a different splash screen (silly me ) this will be obvious to them and therefore wont replace mine because i tampered with the rom.

just trying to be safe and confirm this

ok i just got my htc 8125 today from ebay and have been reading this site for about 2 weeks although just signed up today , please bear with me as im nervous about flashing it !
i followed the wiki on HARD-SPL and my IPL and SPL have changed from "IPL: 2.25.0001 (G4 device) SPL: 2.25.0001 (G4 device) " to " IPL: 2.21.0001 (G4 device) SPL: 2.21.Olip (G4 device w/ HardSPL) " which is now CID unlocked im assumeing ?
OK so now im wanting to flash the ROM after looking around and trying to find one i like i picked " KhanX_V2.2 " THIS is where i get worried ive read about flashing but this file didnt come with a RUU so can i use a RUU from another rom.rar ?
i think thats all the steps i need to do unlock cid ,flash rom and ill have a flashed phone after that correct ?

Descompact new ROM in one directory
Download "RUU no ID " in other directory and copy all files from "RUU do ID" directory to new ROM directory and replace these files. After this , run "newromupdateutility_wizard_noid.exe " and folow all steps for upgrade ROM.

ok and thats it sounds awesome !
thankyou for the files

worked like a charm thanx everyone !!!!!!!!!

HELP!!! i was stupid and flashed my 02 xda iq with out superCID

Hi
I must be the worlds biggest idiot as i have recently just flashed my fav phone my 02 Xda Iq WITHOUT doing superCID on it and now i am stuck in the bootloader screen
ive flashed phones b4 its just on this particular occasion i was being stupid
i have tried other roms for it but they all reply with "invalid vendor ID"
and i cannot find the original rom that came with it
PLEASE HELP ME
how to i load a rom onto it when i havnt run SuperCID on it?

look for your OEM rom and reflash with it, then supercid and after that flash your phone with any wm6 tornado rom

Solution
Hi,
Take a look here: http://forum.xda-developers.com/showthread.php?t=388109
It's should be a solution for your problem.
Also, maybe in your searching, you've found a solution for my other Thread problem (http://forum.xda-developers.com/showthread.php?t=389065)? I just need to update rom via MiniSD and not via USB...

Thanks
Thanks for the help guys
but i am still having problems
i have downloaded MTTY and TyphoonNbfTool and editied the .nbf to my CID but now i either get a "Connection Error: 264" or a "Read error: 238"
what do i do?
what am i doing wrong?
i found my cid by using "info 2" in MTTY
used TyphoonNBF Tool to edit a ROM i download from the Imate site but thier was a link to a ROM in the guide you left me that didnt work :S will it make a diffrence if i do all this on a diffrent rom like i have been trying to do?
Thank you for all your help sharedworld & rafyvitto
p.s. rafyvitto: i cannot find the OEM for my O2 XDA IQ i dont think it has been provided by O2

Me Too
I've gone and done the same thing, but the problem is when I follow your instructions the .nbf file that is produced after the header has been changed is only 512 bytes! So the updater con't read it, what can I do?

tiny nbf
When I change the CID header using typhoonnbftools, the resulting file is only ever 1kb or smaller. What am I doing wrong?