Hi
I must be the worlds biggest idiot as i have recently just flashed my fav phone my 02 Xda Iq WITHOUT doing superCID on it and now i am stuck in the bootloader screen
ive flashed phones b4 its just on this particular occasion i was being stupid
i have tried other roms for it but they all reply with "invalid vendor ID"
and i cannot find the original rom that came with it
PLEASE HELP ME
how to i load a rom onto it when i havnt run SuperCID on it?
look for your OEM rom and reflash with it, then supercid and after that flash your phone with any wm6 tornado rom
Solution
Hi,
Take a look here: http://forum.xda-developers.com/showthread.php?t=388109
It's should be a solution for your problem.
Also, maybe in your searching, you've found a solution for my other Thread problem (http://forum.xda-developers.com/showthread.php?t=389065)? I just need to update rom via MiniSD and not via USB...
Thanks
Thanks for the help guys
but i am still having problems
i have downloaded MTTY and TyphoonNbfTool and editied the .nbf to my CID but now i either get a "Connection Error: 264" or a "Read error: 238"
what do i do?
what am i doing wrong?
i found my cid by using "info 2" in MTTY
used TyphoonNBF Tool to edit a ROM i download from the Imate site but thier was a link to a ROM in the guide you left me that didnt work :S will it make a diffrence if i do all this on a diffrent rom like i have been trying to do?
Thank you for all your help sharedworld & rafyvitto
p.s. rafyvitto: i cannot find the OEM for my O2 XDA IQ i dont think it has been provided by O2
Me Too
I've gone and done the same thing, but the problem is when I follow your instructions the .nbf file that is produced after the header has been changed is only 512 bytes! So the updater con't read it, what can I do?
tiny nbf
When I change the CID header using typhoonnbftools, the resulting file is only ever 1kb or smaller. What am I doing wrong?
Related
HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy
2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy
UP
Guys please help me
another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy
jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Hey guys,
I am a new comer in this forum. I have been trying to update my T-mobile MDA vario for quite sometime now. I have read almost all the guides and instructions in this site. But I don't know what problem I am having. I tried both TNT.1437.Wizard.Touch and TNT.1921_Wizard_TouchFLO roms. In both case the flashing got stuck at 99% and then showed an error 302. then I had to get back to my shipped 2.21 original rom and try again. I also tried XM6r3 rom. I don't understand what I am doing wrong. Please can anybody help me!!! in the guide I was told to flash with 2.26 rom. But whenever I try it it shows invalid vendor id error. ???? What to do now. Is it impossible to upgrade to WM6 in T-Mobile MDA vario. (I CID unlocked my phone following the guide) Any help will be highly appreciated. thanks
MDA vario comes CID locked.. Unlock CID..search for WST... wizard service tool and unlock CID first.
irisiris is mostly right, if you get the invalid vendor id error then you're probably still CID lock. You said that you CID unlocked it already, but it might not have taken. The part he was wrong about though is that WST can't CID unlock your phone, you need lokiwiz to do that which I'm assuming you already knew. However, WST can tell you if you're CID unlocked or not. Just run it on your computer and click the CID actions button and it will tell you if you're CID unlocked or not for sure.
EDIT: Actually I was wrong, mestrini did add CID unlocking to the latest version of WST. Sorry irisiris.
you guys are right I finally CID unlocked my device. I checked it with WST and it said it is unlocked. Now I am in XDA mini rom with IPL/SPL 1.05. now I tried to flash with official tmobile 2.26 rom. but I still get the invalid vendor error. Now what to do????
In case you haven't solved your problem yet, download this file. If the T-Mobile 2.26 is still in the single executable type file that it was when you downloaded it, use either winzip or winrar to extract it to it's individual components then extract this file and allow it to replace the file it needs to replace in the folder you extracted the t-mobile ROM to. Then, just double click on the file to start the flash. Just in case, the name of the file you're going to double click on is named ROMUpdateUtility_Wizard_NoID. This should solve the invalid vendor error.
Hi there,
I have bricked my vox whilst flashing it using Jocky's USPL utility, the cable fell out and now all that the vox will do is boot up to the HTC splash screen and then hang.
I can get the phone to the bootloader screen but I can't flash a new ROM as it is previously a Vodafone branded v1415 so I get Invalid Vender ID no matter what ROM I use.
I guess I need the official VF UK one but I have searched the web for hours now and I am unable to source it.
Is it possible to get round the Invalid Vender ID in any way from the bootloader screen as I obviously can't boot it to be able to use the SDA unlocker.
Any information would be greatly appreciated.
Thanks
Bunter12345
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
matrix77 said:
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
Click to expand...
Click to collapse
Hi there,
Still get the same invalid vendor id with that rom as well unfortunately, thanks for your help though.
did u find any solution as i have the same problem
mrushabh said:
did u find any solution as i have the same problem
Click to expand...
Click to collapse
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Or what about flashing the new SPL while in Bootloader with a RUU? But be aware i do not know if that could brick your device forever..
Da9L said:
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Click to expand...
Click to collapse
This is complete bull****. In another thread I already once explained that this doesn't work.
Hi
I have a Tornado in o2 IQ guise, it is not CID unlocked. When I turn it on I get the o2 splash screen before it goes into bootloader. I tried hard rest but that didn't work so I tried flashing differnt rom, which is how I found that it was still CID locked.
I have tried the solution at http://forum.xda-developers.com/showthread.php?t=388109 to change .nbf header to match that of my phone but this doesn't seem to work Typhoonnbftools just spits out a 1kb .nbf file.
Bootloader reports:
IPL:2.00
SPL: 2.00.0011
Tornado 1U
USB is available and can communicate with the phone using TerraTermm Pro I have tried format BINFS but I'm told "not allowed operation". I really need an o2 UK rom to flash back but it isn't on their site. I looked on the xda-dev ftp but the rom on there is german and has different vendor ID.
Can anyone help?
Thanks