Hello,
I have bought an Omnia and it is in SWEDISH. There is a manual in Samsung Omnia which guides you to change the language in English.
Instructions are as follows:
If you have the microSDTM memory card supplied with your device, go to step 1. If you do not have the microSD memory card supplied with your device, go to step 6.
1. Press and hold to turn your device off (if necessary).
2. Insert the supplied memory card.
3. Press and hold to turn your device on. The multi-language installation program runs automatically.
4. Tap Install.
5. Wait until the installtaion files are copied to the device.
6. From the Today screen, tap Start → Settings → System tab and select .
7. Tap an MLI file and Select.
8. Read the instructions and tap Change language.
9. Enter 1234 and tap Yes. The device restarts automatically.
10. When the language selection window appears, scroll to a language by pressing
or .
11. Press to select the language.
12. Press to select the Yes check box.
13. Press to tap Next.
The firmware is installed and the device restarts automatically.
The problem is after step 9, nothing happens. I called Samsung support and they send me an updates .MLI file, but it didn't work for me as well.
Any Ideas?
Try hard reset
http://www.pspmyspace.com/omnia/2008/09/how-to-hard-res.html
Ok, I'll try to do that, but any one experienced the same problem ? or any other solution ?
defcomg said:
Try hard reset
http://www.pspmyspace.com/omnia/2008/09/how-to-hard-res.html
Click to expand...
Click to collapse
Hard Reset didn't helped.
Related
Is there any way to install google market in the G tablet running original stock firmware?
If so, What are the steps?
Also, I tried going to the new google market website but no luck.
Help... please.
I am new to this... the G tablet is my 1st android devide.
Any info will be appreciated!!!
Naysses said:
Is there any way to install google market in the G tablet running original stock firmware?
If so, What are the steps?
Also, I tried going to the new google market website but no luck.
Help... please.
I am new to this... the G tablet is my 1st android devide.
Any info will be appreciated!!!
Click to expand...
Click to collapse
I'm not aware of any way to install Android Market on the Stock OS,
As for the market website, I don't see why you would'nt be able to download apps from there so thats a first for me.
Have you tried going into your "My Market Account" settings and adding/editing your "My Devices" list?
This is just a wild guess since I had my device rooted and customed 1 hour after first taking it out of the box.
If no go with the web market, I might suggest you root your device and flash TnT Lite since it is simular to the Stock OS.
G'Luck!
there is but its a PITA. The Rev has written some instructions on doing this but I cant find them. (Do many worthless threads). If you want to search for them then you may find them or just read this and add a custom rom
http://forum.xda-developers.com/showthread.php?t=865245
This also helpful
http://forum.xda-developers.com/showthread.php?t=892090
The instructions below are a more concise compilation of instructions that can be found in various posts in the XDA Developer section. Use at your own risk. These instructions are what I used to update my Stock TNT 3588 to be able to use the Google Android Market, using ClockWorkMod. The ClockWorkMod install instructions can be found below in this post.
Get Generic Enhancement Pack v1: h+t+t+p+colon+slash+slash+www+.+multiupload.com/6IFY1JDSJQ (Use with Stock TNT 3452 and higher). This will allow for downloading of file TnT_Enhancement_3452_v1.rar. Unzip this .rar file which will produce files ‘update.zip’ and ‘recovery/command’
These procedures do not install a new ROM but updates existing Stock TNT to:
1) Run faster (Installs more current Nvidia drivers)
2) Install Google APPS (Google Android Market, GMAL, etc. – all except Calendar and Contacts which can be added separately from the android market)
Install Performance Pack For Stock TnT 3452 and above using ClockWorkMod
Step 0.
Install ClockworkMod.
Clockworkmod v.8 (only update.zip file)
h+t+t+p+colon+slash+slash+www+.+.mediafire.com/?dvleg4oatkfxm7w
See ClockWorkMod install instructions at bottom of this post
Step 1.
Delete the update.zip and recovery folder from your tablet (the ones we copied to install ClockworkMod). Don’t worry, this won’t uninstall ClockWorkMod.
Step 2.
From the Downloaded Generic Enhancement Pack v1 (See Link above), rename update.zip to ‘Generic Enhancement Pack v1.zip’ (or ‘whatever name.zip’ you want to name the zip file). The ‘recovery/command’ folder and file won’t be needed by ClockWorkMod.
Step 3.
Create a folder on your gtablet's internal storage (SDCARD) called ROMs.
(Do this by plugging your tablet into your computer, activating USB storage on your tablet, and then a "Removable" drive will pop up in "My Computer". Open that up, right click -> new -> folder.)
Unzip the ‘Generic Enhancement Pack v1.zip’ to that folder. (Leave it zipped, Clockwork will install it from the .zip file as is).
Step 4.
Turn off your device.
Step 5.
Boot into ClockworkMod. (Press the power button and the volume+ button at the same time until the Viewsonic splash screen pops up, release, then you should see “Detect a recovery key pressed”. After that it will think for a few seconds and then it should boot into ClockworkMod)
Step 6.
Breathe. This is where we are going to back up your tablet…just in case.
Navigate down to “Backup and Restore” using the volume buttons. When that is highlighted press the home button to select it.
Navigate to “Backup”, press the home button to select it…and it will back up your tablet. This will take some time (varies depending on how much stuff you have on there).
Step 7.
Navigate down to “mounts and storage” using the volume buttons. When that is highlighted press the home button to select it.
Step 8.
We want to mount “/system” and “/data”, so if it says “mount /system” that means system is not mounted yet.
Highlight “mount /system” and press the home button. The line should change to read “unmount /system”
Next, highlight “mount /data” and press the home button. The line should change to “unmount /data”
After the first line reads “unmount /system” and the second line reads “unmount /data” you’re done with this step, press the back button to go back to the main menu.
Step 9.
This is the step that we actually flash the ROM in.
Navigate down to “install zip from sdcard” and press the home button to select that option at the menu.
Then, navigate to “choose zip from sdcard” and press the home button to select that option.
Navigate to the line that reads “ROMs” and press the home button to select that option.
Navigate to the line that reads “Generic Enhancement Pack v1.zip” …for enhancement file you are flashing and press the home button to select that option.
Navigate to the line that reads “Yes – Install yourzipfile.zip” and press the home button to select that option.
You will now see it do its thing. When complete you will see something along the lines of “install zip from sdcard complete” at the bottom of the screen.
Press the back arrow over and over again until you get to the Clockwork’s main menu.
Step 10.
Here is where we prepare the system to run the new ROM.
Navigate down to “mounts and storage”, select it, and mount “/system” and “/data” again as in steps 7 and 8. Note that “/data” may already be mounted (showing “unmount /data”).
Back up to Clockwork’s main menu.
Navigate to “wipe data/factory reset”, select it. Navigate down to “Yes – delete all user data”, and select it to wipe out user data and all the cache. (You need to do this for the update to function correctly)
Now, navigate to the top option “reboot system now” and select it. Your tablet will now reboot. It may take up to 15 minutes to start up the first time. as it rebuilds the user data and cache for this ROM.
If your tablet bootloops (not likely with the performance pack)… Press and hold the power button to shut the device down. Boot back into Clockwork. Select the advanced option at the bottom, then go to “partition SD card”, for the first option select 2048, and for the second option select 0. Then, redo steps 7-10. This erases all data on your tablet, including backups.
Quick Market Fix (Follow Exactly) to be able to have access to all APPS in the Market.
Make sure Market is running, do search for tv.com, adw launcher, zeam launcher, launcher pro (they will not show up).
If you don't do this, there may be no cache to clear and for some reason the market fix may not work.
1) Go to Settings->Applications->Manage Applications->Running
2) Scroll down to Market. Then hit Clear Cache, followed by Force Stop **DO NOT CLEAR DATA FOR MARKET**. (Clear DATA) may not show as an option to be cleared)
3) Go back, scroll down to Google Services Framework, hit Clear Data, then Force Stop.
4) Start Market again and you will get the Market Error.
5) Reboot and wait for Wifi to connect to your network before doing anything!
6) Restart Market again. Searches for previously missing apps now show up.
You may have to do steps 1 thru 6 once again if all the available apps don’t show up.
Done.
[GUIDE] How To Install ClockworkMod
________________________________________
This is step by step how to install ClockworkMod
If this does something bad to you or your device it's your fault. I take no responsibility for anything, any damage to you, your property, or anyone.
You will need...
1. Patience
2. to be willing to void your warranty
Step 1.
Unzip the downloaded file to your gtablet’s internal memory (SDCARD). Your internal memory should now contain a file named update.zip and a folder named recovery with a file named ‘command’ in this folder,
Step2.
Turn off your device.
Step 3.
Press the power button and the Volume+ button at the same time and release them when the Viewsonic splash screen pops up. You should see "Detect a recovery key pressed" pop up in the upper left corner of the screen.
Step 4.
Watch it install. Your tablet will reboot when installation is complete.
the easiest is to install titaniumbackup fromthe gmarket. Then install the tnt enhancement pack thatroebeet did. That leaves you as stock withmarket. Cwm. Is fine but could void warranty. If you want to see a lot YouTube ehunyadi. He did about 20 videos on the rims and the how to.
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Do you have one for FID BN?
Sent from my GT-S5830 using xda app-developers app
Fid bn tb782b?
Need the ROM for FID BN TB782B, Can someone help so I can unbrick my Zeki 7? Thanks!
Thanks alot
I was searching for these ROM from along time. You saved my tablet.
in need of some help
Hello!
I bought 3 zeki tablets for my kids for xmas. I was able to follow another thread to put google play on them, and 2 of the 3 work great.
One of the tablets keeps freezing though. I did a factory reset, but in doing so, google play update stayed. So I found this thread and tried to follow the directions above.
Now I can't even get the tablet to turn on. :/
I am assuming it is something I did, and I am hoping that someone can help.
Thank you in advance!!
What's the FID shown on the back case.
Sent from my GT-N7000 using xda premium
Does this firmware add any new features? Also does the android version change?
Sent from my GT-S5830 using xda premium
Reflash the rom
Sent from my GT-N7000 using xda premium
All the rom is Andriod 4.04
Sent from my GT-N7000 using xda premium
Please help
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
i cant install the driver
am formated the pc and also tried in another pc
please help me
Pratheesh T K said:
i cant install the driver
am formated the pc and also tried in another pc
please help me
Click to expand...
Click to collapse
I am in desperate need of a rom dump or even just the ft5x_ts.ko from a non 4.04 upgraded version of the Zeki TB 782B. If anyone reads this anymore and has one that has no been updated please send me a reply, I have found a way to repair ALL currupted FT5x touch panels but need an unmodified module to verify the process will work on other models as well.
Thanks.
i have the Zeki Quad Core 4.4.2 Android Tablet and i rooted it but now im looking for a custom recovery that supports my device can anyone help?
Link dead
This link is no longer work
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe...ivers.rar.html
Dose anyone have new link that works or where I can find the tool
Not Working Getting Stuck @ 51%
cablepama said:
Zeki TB782B/TB1082B is using the Allwinner Chip A10.
I search in the web and found the Rom flash steps
Flash Tool LivesuitPack
http://hotfile.com/dl/136803097/cffe5ab/LiveSuitPack_v1.07_usb_drivers.rar.html
The flash ROM Demo video
http://www.youtube.com/watch?v=238RR-WvhrQ
You can get the Rom at below link
http://depositfiles.com/files/u7ew46yzm
FID HN TB1082B ROM
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
http://depositfiles.com/files/0wopipacg
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
FIB BN TB782B ROM
1.Required files: Upgrade tool (Livesuit.exe)
2. Make sure your tablet is fully charged
3. Backup your data, device will be formatted during upgrade
4. The driver and upgrade software work for both Windows XP and Windows 7.
Upgrade Steps:
1. Unzip the upgrade tool and USB drive to your hard drive (recommend to put it in C:\ ).
Double-click the LiveSuitPack_v1.07.exe file, it will automatically install the driver files. Click “OK” to complete the driver installation.
2. Open Livesuit.exe
Double-click to open the upgrade tool LiveSuit.exe
3. Select the firmware
Click “No” to not choose the user upgrade wizard, and click the “Select Firmware” button (the first button from the left) to select the firmware .img file.
4. Turn off your tablet
Make sure the tablet is powered off (Turn it on, press the power button for more than 8 seconds to force power off)
5. Press the key combination to start it in the upgrade mode
a. Press and hold down the “Vol +”, button on TB782B,TB892B or “Home” button on TB1082B
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly (you should get a popup window if done correctly, if not repeat step 5 from beginning)
d. DON’T release the “Vol+” button till the LiveSuit window pops up
e. You can now release the “Vol+” button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver Livesuit folder, click Next to complete the driver installation prompts).
You should see Livesuit window pops up; otherwise, you didn’t do it correctly, you have to repeat step 4 and 5.
6. Select the format to force upgrade
Livesuit prompt “force format”, click “Yes” (Y). All of the original apps installed will be removed.
We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
7. Upgrade begins
Pop-up “OK to force format” dialog box, select “Yes”, the upgrade begins:
8. The upgrade is complete
Firmware download process lasted about three and a half minutes or so, please wait until the prompt “upgrade successful.”
9. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up time machine for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
10. Congratulations! You have flashed the firmware.
you can get the Google Play at below link
http://forum.xda-developers.com/showthread.php?t=1621831
Click to expand...
Click to collapse
I have run the Livesuite and it appears to not work and I have been stuck for quite sometime. I need some help with getting a proper working image I was going to try to use:
FID BN TB1082B ROM
http://depositfiles.com/files/4uoxkwjc4
but the link is no longer active and would I haven't been able to use my tablet the other link is where it get stuck at 51% when trying to transfer the image
http://depositfiles.com/files/ay9hhvpyf
FID CF TB782B ROM
from this one and always gets stuck in the loading process of 51%
any other help with a link to the original image would be greatly appreciated. Thank you in advance!
Alright for the past two week I had searched every corner of the internet looking up on how to install the “MOAR ROM”. Just getting the same answer install with “TWRP”. And to install TWRP you had to root your phone. So now I had to search on the internet and find a tutorial on how to root my phone. In the end I had to go through three different tutorials on how to get the MOAR ROM flashed on my phone. And where I had to go to get the files to download.
Well so you don’t have to do the long, and arbitrary tasks that I had to go through. Here is a tutorial – Telling you from start to finish on what you need to do.
This is for the Sprint Variant of the Samsung Galaxy S5. I don’t know if this will work on other version of the S5.
I apologize on the crudeness of this tutorial, a lot of this was written from memory.
All of the software you need to download is provided by clicking on words that are highlighted in brownish tan-ish color
I don’t not nor do the developers of the software you use are responsible for the lost of data and/or lost of your phone. You assume responsible for modifying your phone.
I have not created any of the software provide in this tutorial.
Step 1. Make sure you have VPU1BOA6 (Lollipop) OS installed on your phone.
-To see if you have this already installed your phone.
- You go to your phones “Setting”
- From there go to “About Device”
- You will then see “Software Version” and underneath that you will see “G900PVPU1BOA6”
If you see “OA6” you are good to go on to step 2. for rooting your device. So Please Continue. If you do not see this that is okay all you need to do is either update your phone or you need to flash the appropriate OS on your phone. To do this continue on to step 1a.
Step 1a. If you fail to see “OA6” in under “Software Version” then you will have to download some files.
- You will need to download Odin
- Then you will need to download the OS “Lollipop”
- Once you have both of these move to step 1b.
Step 1b. Warning!!! Installing this OS will wipe your phone of all its data. Highly recommend that you create back of contacts, photos, videos, etc.
- Now unzip Odin, and run SM-G900P_OA6_FullRestore.exe (This is will give you the Lollipop OS it will unzip it to the file destination you wish)
-Run Odin, Click on the AP button – A window should appear, navigate to where you unzip the OS and click on it.
- Now it is time to move on to set 1c.
Step 1c. Now it is time to put your phone into Recovery Mode and to connect to the computer.
- Power down the phone, once the phone is power down hold the “Home + Power + Volume Down Buttons” Do not let go until you see text show up in the upper left corner of the screen.
- Now some of you might see a screen that gives you a Warning about custom firmware and roms. And press up on the volume on button to continue or press volume down to restart the phone. If you want to continue press up.
- If you have elected to press up then you are awesome and it is time to continue on your route to being rooted. Now you will see the Android Guy “Downloading” or something to that effect. Plug your phone into your computer
- Now move to step 1d.
Step 1d. Again Warning: You will lose your phone data. Continue at your own risk.
- Press Start, on Odin once your phone is connected to your computer. Let it do its thing. Go make some coffee.
- Once it has installed the new OS go ahead and setup your “Slight used Phone”
-You ready for step 2. I think you are.
Step 2. Alright you have decide to root your phone, because you love all the options the Android OS has already provided you. But you know your phone can do more and you want more and deserve all of it.
- So first thing you need is the rooting tool and Odin if you don’t have download it. You will also need to two other additional files. SUPERSU and Knox Removal Mod Do Not Unzip these two (2) additional files.
-Now that you have the all four (4) items downloaded. Unzip the rooting tool and Odin. Now run Odin and click the AP button and find the rooting tool you just unzipped. Now let’s put your phone into download mode and connect to the computer.
- To put your phone into Download mode shut it down and hold the “Home + Power + Volume Down Buttons” until you see a Words in the upper left hand corner of the screen and a Paragraph that Say “Warning. Custom firmware Blah Blah Blah…etc. Press Volume Up to continue or Volume down to restart phone” Press up then Android guy shows up with downloading underneath him. Connect your phone at this point to the computer.
-Press start on Odin. Let it do its thing it should only take to 5 minutes at the most. Now that it is done. Shut your device completely down.
-Go to step 2a.
Step 2a. You will need a Micro SD card. Add those two other files. To the root of the SD card.
- Move to step 2b.
Step 2b. You need to put your phone into recovery mode.
- Your device should be completely shut off now. To put into recovery mode you need to hold down these buttons (Home + Power + Volume UP Buttons). You should see in the upper left hand corner of the screen text saying Recovery…
- You will see a list of options you will want to click to on “apply update from external storage” Find one of the two files you add to the root of the SD card and click. It should start to apply the update. Once that is complete. Repeat the process from Step 2b. for the other file.
- Go to Step 3.
Step 3. So you have decide you like to play risky and rooting just wasn’t cutting for you Daredevil.
- Go to “Play Store” Type into the Search bar “TWRP” – Install “TWRP Manager”
- Once it installed, Open the application, Grant the application root access. Now that the application has root access click on Menu icon in the upper left hand side. Once there go to “Install TWRP”.
- Click on “Device Name” and scroll through the device list and find the “Galaxy s5” and click it. It will then go back to “Install TWRP” page. Now press “Install Recovery” And let it work.
-Go to Step 4.
Step 4. Assuming everything for you so far has gone to plan. The next step is to install MOAR (Mother Of All Roms). Do not unzip the file.
-Connect your phone to the computer.
-Now that you have download MOAR. Move it the “Download” Folder on the SD Card. It will make easier to locate later.
- Now power down the phone and go into the recovery menu. To do this make sure your phone is off and now hold (Home + Power + Volume UP Buttons). Once there click on “Advance”, Then “File Manager”. There you will a list of options scroll until you see “external_sdcard”. Now you will see another list scroll until you see “download”.
-Now find the “MOAR” file. Click it, a couple of options will show up and press “Move”. Now a list will show up, scroll through it and locate the "sdcard”. Another list will show up, scroll through it and locate “TWRP” and press “Select” in the lower right corner and let it do its thing.
- Now go back to the Main Menu. Once you get there click “Install”. You should see the MOAR file, click it. It will take you to another screen and it will ask you to “Swipe to Confirm Flash”. After that your coffee should be done brewing and you might want to get a bagel while you are at.
If you get a couple of errors after installing MOAR, remove the battery and then stick back in and it should correct your problem.
Hi there,
Thank you for your share but here isn't the right place for such a threads. Please post your thread here:
Miscellaneous Android Development
Good luck
Thread closed
1. To start off, make sure your tablet's battery is fully charged.
2. Download the 'T230NU Root Kit' & 'Samsung USB Driver' files to your PC & extract them.
3. Locate the 'Samsung USB Driver' file and install it on your PC.
4. In your Tablet go into Settings/General, scroll down and click on 'About device'. Look for where it says 'Build number', you need to TAP that continuously until it says 'Developer mode has been turned on'. You should now see 'Developer options' on top of 'About device', click it and checkmark 'USB Debugging'.
5. Connect the tablet to your PC with the USB cable.
6. In your PC locate the 'UPDATE-SuperSU-v2.46' file and copy it to your Tablet (Root directory of your tablet is fine or place it anywhere you want, remember the location and DO NOT EXTRACT IT, just copy it as it is).
7. Disconnect the tablet from your PC & power it off.
8. Put your Tablet into 'Download Mode' (push all these three buttons at the same time; Power/VolumeDOWN/Home) As soon as you see letters on the screen IMMEDIATELY hit the 'VolumeUP' button while letting go of the other three buttons). If you did it right, it should now say 'Downloading...', if not then power it off and try again.
9. Connect the tablet to your PC with the USB cable.
10. In your PC locate the 'Odin3 v3.09' file, right click it and choose 'Run as administrator'. Once the program opens it should automatically detect your tablet--it should say 'Added!!' under Message. Now click on the button that says 'BL' and locate the 'openrecovery-twrp-2.8.0.1-degas' file, select it and click open. Make sure to uncheck 'Auto-Reboot' and then click 'Start'. When it's done you should see the word RESET in blue on top & it should say 'RES OK!!' under message.
11. Disconnect the tablet from your PC & power it off by holding down the power button for at least 10 seconds.
12. Now that your tablet is off, go into 'Recovery Mode' (push all these three buttons at the same time; Power/VolumeUP/Home) As soon as the Samsung logo comes up let go of ONLY the power button, then as soon as you see the 'Teamwin' logo IMMEDIATELY let go of the other two buttons. If you did it right then you should now be inside the 'Teamwin' program, if not and your device booted up normally then you need to try again starting from step #7.
13. Click on 'Install' and locate the 'UPDATE-SuperSU-v2.46' file--depending on where you saved it in your tablet on step #6, now at the bottom where it says 'Swipe to Confirm Flash' swipe it to the right, wait until it is done flashing and then choose 'Reboot System'.
14. Before you start jumping for joy, lets first check for Root status (once your tablet boots up, go to the play store and download an app called 'Root Check',
install it, open it & it should say that your device is 'ROOTED').
15. Congratulations! You now have full control of your device.
Are you aware this is now the third how-to-root guide thread made for this exact method, for this model?
First
Second
its same device and same twrp so its for NU and no NU versions, works on both
I've been using the Acheron ROM for more than a year now and it has been a great experience.
AmelieCo said:
I've been using the Acheron ROM for more than a year now and it has been a great experience.
Click to expand...
Click to collapse
isnt acheron thread...... but ive used it too for 10 months now
How do I uninstall this root please?
blairrad said:
How do I uninstall this root please?
Click to expand...
Click to collapse
You can check the uninstall option in superSu app or Re-install your firmware(or install any rom). I also think there might be some kind of superSu-uninstaller script/app somewhere in forums.
how to root galaxy tab4, Model: SM-T230NW, T230NWBMW1ARB1
(My first language is Spanish, I'm sorry if the translation is not perfect).
Device: Samsung Galaxy J7 (2016)
Model: SM-J7108
Firmware: J7108ZHU1APC3
TROUBLE:
I have a Samsung Galaxy J7 (2016) Duos, I thought it was SM-J7108, because in "Settings", the software version said "108", and behind the battery, it also said "108".
But when I was planning to update it to a new version of Android, I saw in the "Download Mode" that said model "SM-J7109", which caused me intrigue. I thought the device was actually "109" model, so I searched and downloaded the latest firmware of that model. And I proceeded to flash with Odin the firmware “J7109KEU1BRD1” of the "109" model.
When I turned on the device, I found the big problem that the device DIDN'T READ THE SIM CARDS of my country, it asked me for a SIM card from CHINA. Apparently the only firmwares for the "109" model were from China and there is no agreement with Google, so the device had NO GOOGLE APPs, nor Play Store. :crying:
I looked for solutions everywhere. And I never found a solution to return to the "108" model, it did not allow me to flash firmwares of the "108" model. I tried solutions for several days, until I succeeded in finding a new global firmware (J7109KEU1APC3) for the "109" model. I flashed it and fortunately it was perfect, without any of the above problems. :highfive:
SOLUTION:
Note:
· Make a backup of all your files because a factory restore will be done and everything will be deleted.
· Have “USB debugging” activated in the developer options. For this we go to "Settings - About the Device - Software Info" and repeatedly touch "Compilation Number" until the developer options are activated. We return to "Settings - Developer Options" and activate USB Debugging ”.
Required Files (download both on the pc):
· CROMService.apk
· Global New Firmware (J7109KEU1APC3)
Xda-Developers doesn't allow me to post links because I am a new user. You can find the apk and firmware easily if you google them. Otherwise, I can't think of any more solution that you write to my email "[email protected]" asking for the links with the title "Fix SM-J7109 Problems". (Only messages in english and spanish).
Steps:
1. Download the “CROMService.apk" and copy it to the device.
2. Install and open the app. A message will appear indicating an unlock.
3. Turn off the device.
4. Start “download mode” by pressing and holding the “Power, Volume Down and Home” buttons at the same time until a blue screen appears.
5. Press the “Volume up” button.
6. Open Odin on the PC.
8. Connect the device to the PC via USB cable.
9. In Odin it should appear colored blue in the “ID” box.
10. In Odin, click on “AP”, search and select the new global firmware (J7109KEU1APC3) that you downloaded on the pc. You need to select the ".tar" file. You have to extract the .rar file that you downloaded and you will get the .tar file. Then you select it in the "AP" box.
11. Go to the "Options" tab and make sure the "Re-Partition" box is empty. "Auto Reboot" and "F. Reset Time" are the only boxes that must be activated.
12. Go back to the "Log" tab and press "Start" and the new firmware will start flashing.
13. When finished, disconnect the cable. (The device will begin to loop without being able to turn on.)
14. Just remove the battery, and put it on again.
15. Start in "Recovery Mode" by pressing and holding the "Power, Volume Up and Home" buttons at the same time, until the samsung logo and text at the top comes out. Release and wait.
16. Using the “Volume Up and Volume Down” keys, move to and select “Wipe data / factory reset”, and then move and select “YES”.
17. Now move and select “Wipe cache partition”.
18. Now move and select “Reboot system now” and the device will turn on, without any SIM card problem and with all Google services and applications installed.
I hope it helps you and that you have been able to succeed by following the steps. Don't forget to click the "Thanks" button. :fingers-crossed:-Diego Rivera Campi-
play stor fixt room file
Hello, I did all the steps but I only get emergency calls and I am also from another country (Argentina) exactly the same thing happened to me as you. Now I definitely don't know what to do with my phone