I'm confused and don't know wat to do.
I cracked ROM with HardSPL and put WinMo 6.5. everything worked well! then I tried to install Manila 2D. It requested a restart and that's it!.
It shows "smart mobility", then the orange booting screen with Windows logo, sounds a beep and switches off.
1) I tried to do Hard reset (with both buttons + stylus) = same thing (shows the resetting bar, requests restart, "smart mobility"-> orange booting screen with Windows logo -> beep -> goes off.
2) I tried with "POLAIMG.nbh" on my FAT32 SDcard = blinks the 3-colorscreen for 1/10 second, restarts -> "smart mobility"-> orange booting screen with Windows logo -> beep -> goes off.
I hawe not even the possibility to connect it via USB to my PC to see what could be the couse or something...
Any idea?
Related
Most T-Mobile WM5/WM6 phones are able to skip the cold-boot Welcome screen entirely and goes straight to "Configuring Device". What registry settings make it do this? Also, what configuration files is it executing when this occurs?
In the initflashfiles.dat file, there are two lines responsible for the applications running at first boot:
Code:
Directory("\Windows\StartUp"):-File("coldinit.lnk","\Windows\coldinit.lnk")
Directory("\Windows\StartUp"):-File("welcome.lnk","\Windows\welcome.lnk")
Removing the second one or adding the comment tag (;), will prevent the "Welcome" screen from appearing. Smartphones do not have the "Configuring Device" screen, just the "Welcome" screen, where you can set date/time and email accounts.
The TMO ones really do have a configuring device screen. My SDA had it with the original WM5 and my T-Mobile Dash (Excalibur) has it.
I've attached a pic of what the screen looks like. It completely bypasses the welcome and does this "Configuring Device" screen instead. I think it's setting things up, but I don't know what files it's using to set stuff up or what it's doing.
I think my Cingular 3125 (StarTrek) does this too if I recall correctly.
How Did You Do That???
How do you cold boot your Dash?
velascoperroni said:
How do you cold boot your Dash?
Click to expand...
Click to collapse
Cold boot is old language. Strictly speaking, a warm boot would be a soft reset and a cold boot would be recycling the power (off/on)
restart with power = warm boot (with DOS PC it was Ctrl+Alt+Delete)
and restart from no power = cold boot (with DOS PC it was the reset button, or toggle the on/off switch)
The 'boot' required to get the welcome screen would be a hard reset. You can get a hard reset by going to the Settings for Storage and clear storage, or:
From power off,
Hold left and right soft buttons (Start and Contacts).
Push power on.
When you see a black screen, press 0.
N.B. These are the directions for hard reset of the Tornado. It does work the same for many other devices, but you may have to check the Wiki for your device if it is not a Tornado.
Hi,
I'm experiencing a strange problem with my Tornado (i-mate SP5, WM6 Platinum Edition). Today it stopped working suddenly, I had to remove the battery. When rebooting, the i-mate sceen appears, then the HTC logo, then Nitrogenius' splashscreen, then a beep sounds, and afterwards the screen is black and nothing happens, no keys are responding. I can "switch off" the phone by long pressing of the power key. Reset with pressing the 2 soft keys and the starting key does not work, the phone starts until the splashscreen and afterwards the screen goes black. Strangely I can connect the phone with activesync, synchronize contacts and calendar and even explore the device with activesync's filemanager; and the battery is charging, too.
Any suggestions except reflashing?
Regards
The same happen to me,backlight doesn't function. Start -- 9 start again 3 ok... flash light is enable ,now i should change home screen settings and power settings... set backlight to 10 minutes or more...
Then it should function
ma3ks said:
The same happen to me,backlight doesn't function. Start -- 9 start again 3 ok... flash light is enable ,now i should change home screen settings and power settings... set backlight to 10 minutes or more...
Then it should function
Click to expand...
Click to collapse
Thanks for the hint, I tried, but unfortunately I seem to miss something. Could you elaborate a bit how you managed to switch on backlight.
Thanks a lot!
EDIT: It worked! You made my day!
After pressing the keys you mentioned (and some others, too) and after rebooting again the backlight is on again. Thanks a lot!
I met the same problem in many cases and I found the culprit, it is tornadolowlight or tornadopowercontrol. while these appli are activating if I soft reset or by force restart (removing battery) then next startup will get a blank screen. But actually in this case the device is on and working only thing is its backlight is off. So, by using a torch light or simply using MyMobiler from a pc you can see the screen, and start that culprit appli then done
OR another thing I have done is I put shortkey for MultiFlashLight and whenever such situation happened I just press the shortkey and activated it and done
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
marco221186 said:
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi am very sorry about ur device but am sure it can be fixed I dont own a device like that I have a HTC prophet but you have to post this question in the same place you read about upgrading your device am sure they have recovery steps can u post the link were u got the files and instructions to update ur device? thanks al look into it and see if there is a solution or not but you should try to hardspl your device and flash again but if ur pc cant find the device try this go to active sync settings and uncheck allow usb connections the pc should find the device also try to download the original rom for your device you can find it at the manufacture site in the download section try flashing it to your device it should help.
if not let me know and plz post the link you got everything from ok
marco221186 said:
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Perhaps here is the right place to look:
http://www.eten-users.eu/index.php?showforum=42
Good luck,
orb3000 said:
Perhaps here is the right place to look:
http://www.eten-users.eu/index.php?showforum=42
Good luck,
Click to expand...
Click to collapse
You can try the solution given here http://www.eten-users.eu/index.php?showtopic=19398 and see if it works for you am still looking for others but again I sugest you post your question there since the members there know more about you device then us and can help you much faster too good luck
http://www.eten-users.eu/index.php?showtopic=19074 has some good information aswell
Please help! 1st time this has happened today. My display has gone off. I soft reset the phone, it loads up the o2 screen, but goes off at the green windows screen. The rest of the phone is ok; flashing green light still ok, ive tried phoning it from another mobile, all ok.The home screen will appear but when i touch the screen it immediatey goes off. Ive a feeling its the windows sofware? I haven't done anything different to the phone at all for this to happen.
Please help!
My HTC TP2 freezes at start up with a white screen and the HTC Logo and some details in red at the bottom:
B 80
R 4.49.25.17
G 61.44tc.25.32U
D 1.86.67102
No USB connection can be established.
What happened:
1. Tried to update from original WM 6.1 to WM 6.5 by using the official HTC ROM update utility. Seems like the phone was in pilot mode during the update. the updtae process was completed and i clicked finish. the device was to restart and the white screen problem started.
2. Restarted phone and multicolor screen appeared and stayed. After connecting with USB cable again "USB" appeared at the bottom but cannot connect to the activesync no more
3. Restarted again (by removing the battery and hit power button) and state reached like described above (HTC TP2 freezes at start up with the white screen and the HTC Logo and some details in red at the bottom).
4. Performed a hard reset but did not help.
What can I do to bring the phone back to life?