plz help me!!! when i connect my mobile through windows mobile device center it connects perfectly to my pc, but after that in few seconds my backlight turns off and the connection is disconnected..
I have also diabled options like "turn off light after 2 min..."
because of that i couldn't flash my mobile plz help me my model id HTC P 3350
strangely enough, it seems your device goes into sleep mode rather than screen off mode... i suggest trying to flash the rom from your SD card so that you don't need your device to be connected.. and then see if the problem is solved.
you can find information about SD card flashing in the forum.. fitting your specific device
nir36 said:
strangely enough, it seems your device goes into sleep mode rather than screen off mode... i suggest trying to flash the rom from your SD card so that you don't need your device to be connected.. and then see if the problem is solved.
you can find information about SD card flashing in the forum.. fitting your specific device
Click to expand...
Click to collapse
Thanks for replying buddy.. But before flashing the rom from my sd card, should i unlock the cid or not??
If yes, I used USPL for unlocking the cid... As it mentioned in the USPL manual it works perfectly till step 12 (that is my phone screen becomes dark).
Here is the problem starts.. When the phone screen becomes dark, my device is automatically disconnected from my PC.. I wanna know whether I have unlocked the CID..
Since this is the 1st time flashing a mobile i was excited, but due to this problem I am very much frustrated.. Plz help me...
Instead of giving you a wrong advice )), i suggest you go to the section dedicated to your device and read the threads dedicated to ROM flashing and exactly what needs to be done in order to flash a new rom.
If i'm not mistaken the HTC Love is actually the same as the Artemis. go to the Artemis section (http://forum.xda-developers.com/forumdisplay.php?f=362) and start readin
Trust that after reading exactly how to flash a ROM and what're the preliminary steps to do that.. you'll know everything you need to know. if you have anymore problems after that, come back
Related
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
Does anybody know where I can find bootable SD rom image from Qtek S200? I`ve been looking on the forum and xda ftp but there`s nothing. At present I have Wizard Love rom on my Qtek. Unfortunetly it stops at "Tap the screen to proceed". I can`t upgrade rom to original one using RUU and bootloader mode.
if you boot into the bios screen, (turn on the phone while holding the camera button), then disable the activesync process wcescomm.exe then you can put the default rom back on, like the NVID version etc.
hope this helps
check the window version on ur pc
the liknks posted refuse to work on vista many a time.
try using XP for better results..
its damn hard to brick your phone you know
I am using windows xp.
I`ve tried to put orignal rom back but I get this ERROR [238] : FILE READ. I`ve tried to use diffrernt roms and RUU`s but nothing helps. Maybe it`s because I have right know Wizard Love rom on my Qtek?
I don't think bootable sd image is possible now, or ever unless someone who knows how its is prepared to put in a lot of work. but I am no expert in these matters it's just that I've read a lot of threads, you see things like http://forum.xda-developers.com/showthread.php?t=285346 but I still haven't read of anyone having success with this. </speculation>
I remember a few thread where someone put a wizard rom on his device and at least one managed to recover it somehow. Search in the threads for "prophet bricked" or something...
edit, found the thread I was thinking of, not so helpful as I thought...
http://forum.xda-developers.com/showthread.php?t=292667&highlight=prophet+dead
my prophet was working normaly and while i was installing a program it stoped. i formated it and reinstalled the windows but what happened is:
1-it doesnt recognize the memory card anymore
I thought it is rom problem , i tried to install anothere rom but THERE IS NO 3 colour screen but the prophet is working
please any body have idea about this problem reply .
have u done hardspl? try flashing another rom..
i tried hardspl but it didnt continue the process
while i was doing hardspl my prophet turnedoff
thank blusilv for reply
where is the help??????????????
Listen up
First off all charge the battery for 2 hours before doing this.
After turn on the device and press for 5 seconds the com button on the left side of the device.
You will enter the 3 colours loader.
Connect the device to the PC.
Step 2 Install the original Rom
Step 3 Do a Rom update use step 2 of pdamobiz Rom, select update rom file and wait.
Step 4 Do a hardspl G3 or G4 see your device to see witch one is it.
Step 5 install a new Rom with the RUU update utility G3 or G4.
Then you just have to wait the device to reboot and you can use it.
Note: Use the 2.19 radio Rom its the most stable, you can install it after installing the final Rom ok.
Any questions feel free ok bye.
i am sorry but i thought the three colour screen meens bootloader my problem now that i cant change this rom as it dont recognize the memory and also there is prblems with bluetooth.
thanx deltav but ineed more help
Listen up that procedure i explained would put the PDA working 100%, if you have the problems you say you do, its because you installed a rom inappropriate for you device. The memory and bluetooth problems come from bad radio rom and from roms that are not suitable for the device, you mad bad installations, that is the real origin for your problems, if you want to stay with your device with problems fine, in my opinion the best is to put the original rom in and after that, do the rest of procedure if you don´t want to this its up to its your device not mine.
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Hello,
Same problem here, no 3-color screen appears when I start or reset and press the comm button on the side.
help for me and seichi please
OK guys after beeing in bootloader mode do a g3 or g4 update with a new rom don´t forget to connect the usb cable correctly, see if it works, if it does not tell me what are your problems, bye.
drdisho said:
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Click to expand...
Click to collapse
Listen did you charge the device for 4 hours first on the electricity - step 1
Do a hard reset with the stylus on the device - step 2
press the left com button for 5 seconds on the device, before anything appears on screen - step3
If everything goes well the 3 colour screen will appear.
hello friends,
any body please help me i got one htc S710 in dead condotion the pcb inside is in good condition so it could be software probleb. i am not able to flash the phone. how to flash please help me
kripalu said:
hello friends,
any body please help me i got one htc S710 in dead condotion the pcb inside is in good condition so it could be software probleb. i am not able to flash the phone. how to flash please help me
Click to expand...
Click to collapse
1)press and hold the camera button and insert the usb cable
2)Flash the rom you had first
thanks a lot sir my phone is connected to active sync from your guide now i will hopfully flash the phone thanks
sir as per your guidence i trye to flash the vox but it stoped by givving error no (270) what should i do.
i think it is stopping due to my device is not unlocked
please sugest me
you said yu connected to active sync?
that means your phone is working and to flash a new rom you have to flash the uspl first..check the 1st thread on the vox section
sorry sir it is not connected to active sync but while pressing camera button i inserted the usb cable in phone phone comes in four color screen and i tried to flash the phone with your 6.5 rom it sdays error [ 270]
please help me
application unlock and uspl how is possible in dead phone
sir please help me it is giving error after 3% what should i do
There is a recent other thread dealing with a V1415 ROM also stuck in bootloader. Your choices are:
1.) (preferred): load a standard ROM for your device if you can get one and restart the flashing procedure with custom rom after the orginal ROM boots again. For an original S710 you can get it at HTC.
2.) (if you have no original ROM and cannot get one for your device): See the V1415 thread and the tips for Gold Card creation using QMAT.
tobbbie said:
There is a recent other thread dealing with a V1415 ROM also stuck in bootloader. Your choices are:
1.) (preferred): load a standard ROM for your device if you can get one and restart the flashing procedure with custom rom after the orginal ROM boots again. For an original S710 you can get it at HTC.
2.) (if you have no original ROM and cannot get one for your device): See the V1415 thread and the tips for Gold Card creation using QMAT.
Click to expand...
Click to collapse
Typing (Not Speaking - Joke) from personal experience... your best bet is to create the gold card with a sd card that's no more than 1gb. you can use the instructions from http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
once you got all the steps down, you will be able to flash the phone with any vox rom, but my recommendation is the clean custom rom from http://forum.xda-developers.com/showthread.php?t=414416 thanks to fireburned!
lots of credit to everyone that assisted me... dsixda,hikkey, hastowent, tobbie... much respect!
You can use any non(!)-SDHC card. You can hardly get small cards nowadays, so a 2GB is the best for later re-use (depite I dont have that problem I bought one just to see if it works - and it does!). Funny thing is that the sector that the Gold Card Key is written to is not used by the FAT (or data), so you can use even a full card and writing the sector to it with QMAP will not spoil the content of the card - so no need to buy one, just lend it if you find someone that trusts you (make a backup copy of the SD content before nevertheless).
thank you chardc but i have serch all the paze for making gold card but i am not able to find mtty and qmat is also trial version please help me
AT FINALLY I GOT OFFICIAL ROM OF VOX but phone is not getting on after 100% flash what could be the problem any body please help me out
okay try this
if ur phone totally dead so first make back working conditions first download vox orignial wm6 roms this roms are in exe files these rom install automatic in ur phone no process need for this roms first ur battery should fully charged then connect ur phone with ur pc for direct bootloader try this method Bootloader
Power off device
Press and hold the camera button
Attach USB to computer and smartphone
Done.
(Works with all HTC Smartphones)
after this method ur phone screen go blank know click on wm6 rom exe file this rom start automatic install in ur phone after install ur pone come back in working condition with wm6 roms this only method that ur phone come back alive
hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??
I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.
the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try