Does anybody know where I can find bootable SD rom image from Qtek S200? I`ve been looking on the forum and xda ftp but there`s nothing. At present I have Wizard Love rom on my Qtek. Unfortunetly it stops at "Tap the screen to proceed". I can`t upgrade rom to original one using RUU and bootloader mode.
if you boot into the bios screen, (turn on the phone while holding the camera button), then disable the activesync process wcescomm.exe then you can put the default rom back on, like the NVID version etc.
hope this helps
check the window version on ur pc
the liknks posted refuse to work on vista many a time.
try using XP for better results..
its damn hard to brick your phone you know
I am using windows xp.
I`ve tried to put orignal rom back but I get this ERROR [238] : FILE READ. I`ve tried to use diffrernt roms and RUU`s but nothing helps. Maybe it`s because I have right know Wizard Love rom on my Qtek?
I don't think bootable sd image is possible now, or ever unless someone who knows how its is prepared to put in a lot of work. but I am no expert in these matters it's just that I've read a lot of threads, you see things like http://forum.xda-developers.com/showthread.php?t=285346 but I still haven't read of anyone having success with this. </speculation>
I remember a few thread where someone put a wizard rom on his device and at least one managed to recover it somehow. Search in the threads for "prophet bricked" or something...
edit, found the thread I was thinking of, not so helpful as I thought...
http://forum.xda-developers.com/showthread.php?t=292667&highlight=prophet+dead
Related
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
Hi all
First of all sorry for my grammer, english in not my native language.
I've tried to update my O2 XDA Neo with SMART1 WM6 Rom, i've download the file and started the "UPGRADE_ROM.bat" after installation finished i notice an error click then hardreset the phone, for a second on the display apear the HTC logo, after that the QTec blue screen with the IPL 2.15.0001; SPL 2.20.0001; GSM 02.20.21; OS 10.1.0.811 and then nothing happens. I hardreset the phone several times but so far no good. I come up with idea to go to bootload (holding camera button and pressing reset) and try to reflash it but the update_rom.bat says "No Device Connected" from there i have no idea what to do. I'm with MS ActiveSync 4.5 please help me.
the same problem with me i tried several methods to fix this problem but unfortunetely couldn't find any solution to fix it finally took my phone to the technical service.If you have quarantie I recommend you to the same thing.But never say them that I tried to flash a new rom because this breaks the quarantie.Just say my phone doesn't start.Don't worry they can't understand that you 've tried to flash your O2
Ok, things you should *do* before upgrading to WM6
Make sure that you have AKU2.2 (for instance RUU_Prophet_220734_2207114_024721_NVID.exe) installed _BEFORE_ upgrading to either AKU 3.3 (aserg for example) or WM6. This is in any case true for G4, most probably this goes for G3 as well, but I cannot say this for sure, since I do not own one.
If you happen to get stuck at boot screen because update process failed, grab the rom above and run it with USB plugged in, this will 9/10 of all cases fix your device.
No, I do not have a link to this rom, try to look for it yourself.
For the rest, happy upgrading
rom flash
make sure you disable your antivirus softwear and your windows firewall don,t use any extended usb hubs and you have cid unlocked it make sure let it do a full flash dont do enything else with your pc when you flash your phone good luck i hope this was usefull
Hey guys,Yesterday i wanted to update my rom.I have windows mobile 6.1.Apperently with the new rom it makes it faster.I unlocked my device and tried loading the softawre on.Everytime i try loading it ,the computer says it lost the connection with the pc.Today i tried using my phone and when i switch my phone on ,the phone does not respond and the screen has three colour(blue,red etc).How do i get into my phone or reset it so that i can use my existing rom and windows?e-mail me anytime
You're stuck in Bootloader
Hi
Your phone is stuck in Bootloader Mode. You may find that by removing the battery and re-inserting it you will get to a position of loading Windows Mobile. The Bootloader is the software on the phone that is used to install a new operating system. If you search for "Stuck" and "Bootloader" on the forum or the section of your device you will probably come up with some threads about this problem.
The worst case scenario is that the "flash" of the new operating system has gone wrong so the Windows Mobile operating system can not load. If this is the case, the phone will automatically revert to the Bootloader as it can't "see" any system installed. Think of a PC reverting to the BIOS and giving you the message "Operating System Not Found" if you remove or disconnect the hard drive.
If you can't boot simply be doing a soft reset using the stylus in the hole you need to successfully flash a new Operating System or ROM. Check out the Encyclopedia at the bottom of the main forum page if you don't understand any of the words I've used here. If you can be more specific about your device and the ROM you tried to flash others may be able to help.
Cheers
andrew-in-woking
Help
Hi,how do i flash when i dont have excess to windows itself?The colourful screen comes on immidiately when i start my phone!!
XZ5J4H said:
Hi,how do i flash when i dont have excess to windows itself?The colourful screen comes on immidiately when i start my phone!!
Click to expand...
Click to collapse
Welcome to the forum
Please READ the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Vox
Over there you´ll dind a way to flash your device
Good luck,
Stuck windows
Hi,I managed to load mono lisa windows 6.1 on my phone.I did this by justing loading utility update file.Followed all the intructions.After the rebooted it just goto stuck.I tried taking the batery out and inserting it back in the phone after 10 seconds.The problem is when i start my phone it gets stuck and the everything in unresponsive.Help me please!!1
Hard Reset or Reflash
Hi
After flashing a ROM you always need to perform a manual Hard Reset. Read the Wiki page on your device for info on how to do this. If that doesn't help then you may have a bad flash. If this is the case then flash the ROM again but as soon as it's done perform a manual hard reset.
If you still can't get it working flash an official operators or HTC ROM to your device.
G'luck!
andrew-in-woking
Rom Wanted
Hi Guys,what is the latest and best rom for a htc s710 today?I want to upgrade.Please help!!Want something that also makes my phone faster.Currently have the VOXrOMwM6.1 cLEAN_V1.3
XZ5J4H said:
Hi Guys,what is the latest and best rom for a htc s710 today?I want to upgrade.Please help!!Want something that also makes my phone faster.Currently have the VOXrOMwM6.1 cLEAN_V1.3
Click to expand...
Click to collapse
Enter to Vox forum and READ a little about all ROM´s there.
The best way is to test severals till you get the one fits your personal needs
Good luck,
I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?
Some problem....
Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!
It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse
link not working ( http://www.mediafire.com/?wy2yynnjz2z )
http://dimice.ru/ACER_EUU.exe
Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...
XDA has never meant to be HTC only.
Just open your eyes, dear sir.
I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)
stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!
Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM
Any ideas?
This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.
Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!