Related
http://forums.t-mobile.com/tmbl/board/message?board.id=87&thread.id=30842
He took a screen shot of it here: http://m.flickr.com/#/photos/soreco/3249188324/
No word on what the changes are yet.
LOL, i dont wanna believe it then finally find out it's just a sick joke but the screenshot looks real though
wpbcubsfan said:
http://forums.t-mobile.com/tmbl/board/message?board.id=87&thread.id=30842
He took a screen shot of it here: http://m.flickr.com/#/photos/soreco/3249188324/
No word on what the changes are yet.
Click to expand...
Click to collapse
Somebody wake up JesusFreake!! Where's Koush?
Is it possible to pull an OTA and then take it off the device with ADB without installing it?
hmmm.
I'm gonna have to go with it being a hoax... I believe that Google even confirmed that the new cupcake branch upate would be called RC31.
Looks legit to me. Seems to be a tmobile version of adp 1.1.
dwang said:
Looks legit to me. Seems to be a tmobile version of adp 1.1.
Click to expand...
Click to collapse
I agree with the legitimate part. The kernel, baseband, and build ID numbers all look rationally composed/upgraydded. As long as they don't "fix" the SPL or lock out test keys, I'm ok with a little bump for now.
I'm still waiting to see if this is real or not but I did notice something on the google android issues site that made me think we were getting close. Usually the last thing you test before release are upgrade scenarios.
[imported from Google's internal bug database]
STEPS TO REPRODUCE:
1. Dream device was running a pre-cupcake userdebug. within the last week
or so I had previously downloaded a set of files from browser, a couple
market apps, etc
2. Flashed cupcake userdebug, without wiping data
EXPECTED RESULTS:
On device boot-up, none of the previous notifications would be displayed
OBSERVED RESULTS:
The home screen displayed 13 or so "download complete" notifications that
were previously dismissed.
I then selected 'Clear Notifications'
Result -> Notifications cleared, then approximately 5 seconds later
reappeared, then immediately disappeared again.
Click to expand...
Click to collapse
http://code.google.com/p/android/is...ID Type Version Security Status Owner Summary
Also I'm not sure if the flashing they are referring to is the way you would test an OTA update.
This might be a false alarm.... but I hope not
The guy in the original thread said there's google voice searching.
Just got an email about:
To ensure a great experiance with the T-mobile G1 with Google, customers with these devices will receive an Over the Air (OTA) update to their devices between February 5 and February 15. The OTA will include new system enhancements such as the ability to save pictures or files by long-pressing an item, check for system updates, and use the Google Voice Search feature. The OTA will also fix a number of known issues. New G1 activations will receive the OTA up to three days after service has been activated.
Just IM'ed the lord of the Dream.... we'll see what he says?
And still no cupcake.
coolbho3000 said:
And still no cupcake.
Click to expand...
Click to collapse
Wehhh wehhh...
Go play on the market where people care what you have to say.
rynosaur said:
Somebody wake up JesusFreake!! Where's Koush?
Is it possible to pull an OTA and then take it off the device with ADB without installing it?
Click to expand...
Click to collapse
Yes. It will be saved in /cache. All I need is the name of the zip file, and I can download it directly from google.
Everyone with RC30 check your logcat log for any sign of a zip file
something like
logcat -d V | grep zip
I got the same email that speoples20 got.
RC33 is an official update from T-Mobile to start being pushed out to the general public feb 5th to feb 15th and then for all new activations within 3 days.
speoples20 did you notice that The Forecast was dated February 2, 2008? Looks like T-Mobile came up with a time warp while making the OTA.
Just to clarify....
EVERYONE ON RC30 (JF OR NOT)
The reason for this is once JF has the file name, he will be able to download it.
NOT THE SD CARD CACHE!!!
Open Terminal Emulator
SU--Enter
Type in CD /cache
Type in LS
Now if that comes up empty, type THIS in and tell us if you see a log entry containing the file name:
logcat -d V | grep zip (enter)
The alarm has been rung!
http://code.google.com/android/migrating/m5-0.9/changes/android.content.Intent.html
can FOTA_UPDATE_ACTION or any of the other FOTA_* functions help out?
Also, you could try to force an update. Download and install anycut (if you haven't already ), and then make a shortcut to the "Device Info" activity. Open it up, go down to the bottom and click "check for update". If it starts downloading the file, I think it should say the name of the file on that same screen. If not, open up a terminal emulator and look in /cache, or try the logcat command:
logcat -d V | grep zip
CHECKIN_SUCCESS but no pending upgrades or downloads
I'm guessing that will be the case until Feb 5th or later for everyone else too.
ok word has spread fast about this issue at he AC and some people are asking from over here are asking JF users to still look for the zip file in the cache. but here is my question, will it even help? I ask because I am not sure about this:
All of us that have root are not supposed to be updated automatically. Now does that mean that the ota is downloaded by the phone and just never auto installed or does it mean that the file can never be downloaded ota?
I am trying to Flash the AXURA ROM. ( http://forum.xda-developers.com/sho...tion+2.5.1(12/21/2010)+Fixed+issues+themed!!! )
Problem is the forum will not allow me to download the "update.zip" file required to complete the Flash.
But it allowed me to download "disable-lagfix.7z"
When I click on the "update.zip" it logs me out and says -
You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:
You are not logged in. Fill in the form at the bottom of this page and try again.
You may not have sufficient privileges to access this page.
If you are trying to post or download, your account may be awaiting activation or you may need to register.
WHAT THE HELL?????????????????
RaptorOne3 said:
I am trying to Flash the AXURA ROM. ( http://forum.xda-developers.com/sho...tion+2.5.1(12/21/2010)+Fixed+issues+themed!!! )
Problem is the forum will not allow me to download the "update.zip" file required to complete the Flash.
But it allowed me to download "disable-lagfix.7z"
When I click on the "update.zip" it logs me out and says -
You are not logged in or you do not have permission to access this page. This could be due to one of several reasons:
You are not logged in. Fill in the form at the bottom of this page and try again.
You may not have sufficient privileges to access this page.
If you are trying to post or download, your account may be awaiting activation or you may need to register.
WHAT THE HELL?????????????????
Click to expand...
Click to collapse
That is strange...
Anyways, you should change your title to not be all caps.
I see that that was ur first post. Did u click on the activation link in the email that was sent to u when u registered here?
And like said above, please avoid using all caps.
.....u mad bro?
verysafety said:
.....u mad bro?
Click to expand...
Click to collapse
LMFAO
and u dont need the update.zip to flash axura. just rom manager, and odin for kernels..
vvaffles said:
LMFAO
and u dont need the update.zip to flash axura. just rom manager, and odin for kernels..
Click to expand...
Click to collapse
Well, at least not being able to download update.zip has prevented the OP from bricking his brand new phone (for a while, at least)...
kegobeer said:
Well, at least not being able to download update.zip has prevented the OP from bricking his brand new phone (for a while, at least)...
Click to expand...
Click to collapse
Well when he does look for a post titled:
XDA NOT ALLOWING MY PHONE TO TURN ON!!!!!!!!!!!!!
EXCESSIVE PUNCTUATION!!!!!!!!!!????????????????????$$$$$$$$$$$%%%%%%%^^^^^^^^^h
/Witty yet shallow remark using the search function.
Sent from my Android using the power of my dreams.
here you go. Uploaded and hosted off the forum just to make sure you could get it.
http://www.filedropper.com/update_2
I AM NOT RESPONSIBLE FOR ANY HARM DONE TO YOUR DEVICE THROUGH METHODS MENTIONED BELOW. THESE METHODS WILL DOWNLOAD UPDATES THAT WILL WANT TO INSTALL. DO NOT INSTALL THEM THEY MAY BRICK YOUR DEVICE. STICK TO THE INSTRUCTIONS BELOW AND YOU SHOULD BE FINE.
Also note it may be weeks, perhaps months before Atrix 2 updates begin rolling in. It's a very new device!
Now, the fastest way we are going to get this Bootloader unlocked is with a little ol' fashioned teamwork. These methods have worked for other devices but require some participation and patience.
Previous devices having used the method:
Bionic
ATRIX 4G
Here are the methods we will be using:
1.Motorola, ATT SBF files for Motorola Atrix 2
2.Project Cheesecake - finding update versions on Motorola servers
1. SBF files
If you or someone you know is able to provide SBF Files intended for the Atrix 2, you can post them here or email them to me at [email protected] if anonymity is an issue.
2. The tried and tested Project Cheesecake!
Automatic Method:
What you will need
1.an ADB setup.
2.Obviously, Root.
3.ClockworkMod Recovery set up on the phone.
4.You should have an FXZ Ready in case you mess up.
5.Root Explorer from market
Now an app does it all for you. Imagine that.
1. Okay, so, download THIS APP RIGHT HERE.
2. Install the app on your phone.
3. Open the app. Click the first button.
4. Reboot.
5. Open app, click second button. Select a server. QA And Staging servers seem most common for updates, but we need to check them all. The default is in Production -> master-blur.whatever.com if you need to get back to it.
6. now click third button in app to check for update. click setup (the moto account thing is bs). Now if it gives you a wifi error, that means the server is down that you chose. If the server is up it will check for an update.
7. If that didn't work, select a new server with button 2, and then check again with button 3.
8. Any comments in this post about the ghettoness of my app will result in replies including but not limited to A) Slander, B) flaming, and C) death. Try to keep the thread pretty on topic to cheesecake method and other info. I know my app can be refined, jcase has been giving me some tips on streamlining my programming and su permission reduction, but it does good stuff, don't worry. It even remounts system as RO when it uses it.
9. godspeed, guys.
What do I do if my phone finds an update?
if you are uncomfortable dealing with it for sake of bricks / other bad stuff, let someone else know or post it in the thread. It will be attended to properly.
DO NOT INSTALL IT. IF YOU FEEL COMFORTABLE YOU CAN DOWNLOAD IT
Depending on what the update contains, it could brick your device. Get in touch with a developer ASAP if you don't know what to do. Post in this thread which server you found it on. load up adb. The file you found should exist somewhere in /cache. pull it to your computer. Then delete it. Be warned that the update after downloaded tries to install every 2 minutes and while typing a text i accidentally clicked install once. I almost messed myself up.
log onto chat.andirc.net and go to #bionic. You might find me in there.
Log onto irc.freenode.net and join #droidbionic and #bionic-dev. The bionic-dev channel is ONLY for dev-related talk. If you just want to kick it, converse in #droidbionic.
Someone experienced here can help you, and let you know what you've found.
If you liked my work here, click the thanks button at the bottom of this post! Thank you all for reading.
Click to expand...
Click to collapse
Link to original topic:http://forum.xda-developers.com/showthread.php?t=1281675
Manual Method:
Instructions:
List of servers:
Code:
master-lab.blurdev.com
master-demo.blurdev.com
master-dev.blurdev.com
master-qa1.blurdev.com
master-qa2.blurdev.com
master-qa3.blurdev.com
master-qa4.blurdev.com
master-staging1.blurdev.com
master-sdc1.svcmot.com
master-blur.svcmot.com
master-homer.blurdev.com
master-bart.blurdev.com
master-lisa.blurdev.com
master-maggie.blurdev.com
master-marge.blurdev.com
master-bqa1.blurdev.com
master-bqa2.blurdev.com
testcloud01-sdc1.blurdev.com
1.Root the device
2.Navigate to /system/etc/motorola/com.motorola.blur.service.blur/ in a root file explorer [ie. Root Explorer]
3.Edit data_wifi_only_settings.mkitso. Replace "data_wifi_only_feat_avail=1" with "data_wifi_only_feat_avail=0"
4.Edit defaults.xml. Replace the entire file contents with:
Code:
<map><string name='blur.service.ws.useApnProxy'>0</string><string name='blur.service.ws.masterCloud'>master-lab.blurdev.com</string></map>
5.to /system/etc/motorola/com.motorola.blur.setup in a root file explorer and Edit defaults.xml. Replace the entire file contents with(you settings may already look like this, if so ignore it):
Code:
<?xml version='1.0' encoding='UTF-8'?>
<map>
<boolean name='AllowActiveSync' value='true'/>
<boolean name='ShowSkipSetupMenu' value='true'/>
<boolean name='ShowConnectionChooser' value='true'/>
<boolean name='ShowDataSaverInSetup' value='true'/>
<boolean name='WifiPreference' value='true'/>
<boolean name='loc_consent_unchecked' value='false'/>
<boolean name='CloudPreference' value='true'/></map>
6.Wipe data and cache
7.Navigate to Settings > About Phone > System Updates
8.If it says "Update Available," let the update download. Do not install the update, because it could potentially brick your device.
9.Pull the update.zip file from /cache [Root Explorer or ADB] and upload/post the file for developer interest
10.Continue to test the next server. Navigate to /system/etc/motorola/com.motorola.blur.service.blur
11.Mount the folder as read/write
12.Edit defaults.xml. Remove "master-lab.blurdev.com" and put in the URL for the next server.
13.Repeat the steps from "Wipe data and cache" every time.
Click to expand...
Click to collapse
Credits: They all deserve thanks so if you see them around the forum, or wish to go to their original topics click that button!
- eval- for his initial discovery on the Atrix 4G
- Navalynt for scanning servers
- SamCripp, the2dcour - working on "Project Cheesecake" and "Pudding" unlock projects
-kennethpenn for the instructions as well as setup.
-Phydo for automatic method and app!
We might try this. It automates the process. All the credit goes to phydo for this though. I am looking at it now to see if we can try it on our Atrix 2
http://forum.xda-developers.com/showthread.php?t=1281675
Jim
I saw that as well... Let me know if its working on the ATRIX 2 and I'll edit the topic accordingly. Thanks again for your continued interest, I really appreciate it.
Sent from my MB865 using XDA App
Phydo's app works beautifully. I installed and ran it on severall of the servers, if it asks to setup and account just click setup... then if it asks to setup a wifi connection then that server is down, which I am getting on most of them right now as would be expected.
Jim
Works flawlessly on my end too.. updated the first post with instructions.
Sent from my MB865 using XDA App
Just pulled Blur_Version.55.11.16.MB865.ATT.en.US.zip with cheesecake.
Judging only by the number in the filename, this is the stock version of blur... probably.
Can't post links so...
Awesome man! I'll check it out!
It's only 50 megs so I don't think it's the full filesytem.
This might be the update from the mythical 2.3.4 version listed on the moto dev site.
edit: I see some recent timestamps... system\etc\motorola\ap_flex_version.txt
Code:
GAS_NA_EDSNGBATT_P015
Sat Oct 29 10:13:33 PDT 2011
derp derp
Code:
Blur_Version.55.13.15.MB865.ATT.en.US %Blur_Version.55.11.16.MB865.ATT.en.US
Went ahead and too a giant leap and upgraded.
After a few harrowing minutes, it was updated to 55.13.15
Android version is 2.3.6
Baseband is
2011-10-28 12:44 Off.Bld
LUD_EDISON_R1D7_PATCH_34_111028_1226
Webtop has been updated, looks like firefox 7.0.1 is installed now, can't test it myself.
Getting prompts from motorola to "upgrade".
Lost root in the update. Going to try to get it back...
Edit: Root works!
Code:
fastboot oem unlock
... FAILED (remote: unsupported command)
what files were in the update? was there an fxz or an sbf? were there any files with I think mbl in the name? Those would be the bootloader, if so we need to take a look at them. I will put it down and check it out.
I am not quite ready to install that yet, since I am on the right track to have a FULL ubuntu desktop running in webtop, right now I have broken tomoyo, so no facls, or security on the webtop files, and I have a terminal and sudo, as well as synaptic, so I will hold off on 2.3.6 for now, since there is a webtop update in there.
I will start a new thread for the webtop stuff once I have more. Now I need to get with tallnerd1985 to get webtop2sd working on our phones.
Jim
Thank You for warning everyone else even while you are still having trouble. You can take it back to At&t/Bestbuy or wherever you bought it - They won't know and 99% don't care especially about the Atrix 1 or 2...
Just act PISSED! If anyone asks you a question...
Looks like motorola really is trying to push an update to me, 15 MB file update to 55.13.16. I'm not going to touch it for now. Gotta get some sleep
Don't see any SBFs or FXZs...
This is my first rooted android phone, so i'm just flying blind here.
Now that I can post links, here's the one linked to through tinyurl above.
Ok, so in the 55.13.15.MB865.ATT.en.US file, there are 2 boot loaders, one is called prologue_loader.ldr and the other one, which I am guessing is the one we already have is called production_loader.ldr
This will require some more looking to see if the prologue_loader.ldr is unlockable, so that they can load thier updated image, then relock it with the production_loader.ldr
This might be good news and it might be nothing, but I will keep everyone posted, with what I find.
Jim
Keep up the good work guys
Try to find the stock build as well, because if that is found i could probably unbrick my phone!
moofree said:
Looks like motorola really is trying to push an update to me, 15 MB file update to 55.13.16. I'm not going to touch it for now. Gotta get some sleep
http://dl.dropbox.com/u/14536681/Blur_Version.55.13.15.MB865.ATT.en.US.zip
Don't see any SBFs or FXZs...
This is my first rooted android phone, so i'm just flying blind here.
Now that I can post links, here's the one linked to through tinyurl above.
http://dl.dropbox.com/u/14536681/Blur_Version.55.11.16.MB865.ATT.en.US.zip
Click to expand...
Click to collapse
Jimmy273 said:
Try to find the stock build as well, because if that is found i could probably unbrick my phone!
Click to expand...
Click to collapse
Ok use the link above and try to get it on the root of your SD card, I am not sure if that zip file work or not, for CWM or fastboot, if you can connect to ADB with fastboot, you should be able to flash it from that.
Jim
Ok .. this is driving me nuts here. Trying to apply the Blur_Version.55.13.15.MB865.ATT.en.US.zip update to my Atrix 2 .. since there is NO WORKING ClockWorkMod that can be used .. tried doing it other way that jimbridgman suggested and that was fastboot.
Well .. that doesn't work either .. receive error message:
>fastboot -w update Blur_Version.55.13.15.MB865.ATT.en.US.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Anyone else have any ideas of how to apply this update ?
LordGeek said:
Ok .. this is driving me nuts here. Trying to apply the Blur_Version.55.13.15.MB865.ATT.en.US.zip update to my Atrix 2 .. since there is NO WORKING ClockWorkMod that can be used .. tried doing it other way that jimbridgman suggested and that was fastboot.
Well .. that doesn't work either .. receive error message:
>fastboot -w update Blur_Version.55.13.15.MB865.ATT.en.US.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Anyone else have any ideas of how to apply this update ?
Click to expand...
Click to collapse
Good question, though you'll need to start from the first file...
Blur_Version.55.11.16.MB865.ATT.en.US.zip
I think the filenames are for the versions that the patch gets applied to, not the version it'd be updated to.
This is all new to me, I'm guessing you could boot up with VolumeUp+VolumeDown held down, choose the recovery mode, and do volup+voldown for the recovery menu and choose update, and the zip from that menu...
Edit: This works. Updated from 55.13.15 to 55.13.16
Baseband got pushed back a few days
2011-10-25 11:19 Off.Bld
LUD_EDISON_R1D7_PATCH_33_111025_1101
Lost root again, but thankfully the zergling rush is a highly effective strategy still
-=Insert warning about updating being AT YOUR OWN RISK and not being responsible for bricks etc... =-
Additional warning that this might cut the phone off from official OTA updates from Motorola...
@moofree:
You are correct, I was successful in getting the 2 updates on, and yes, root was lost. However, I was unable to get the root back !!
Tried manually, tried the 1-click.. Neither would give root. So, since I just received the phone the day before from BestBuy, I did the next logical thing.. Bricked it and returned the phone defective.. LOL
So, now I have a replacement, new Atrix 2.. I'm leaving it exactly where it is until either the OTA's come through the right channels, or something more permanent and correctly working has been done for unlocking the bootloader and rooting.
If not.. 30 days from 11/01/11.. Options are still open with the HTC Vivid and SGS2 Skyrocket.
Sent from my MB865 using Tapatalk
I Want to reiterate to everyone who is trying to help unlock the boot loader by using the cheesecake method here that you don't want to apply any of these updates directly. Motorola always relocks the bootloader with 99% of these updates. It will be one of the development versions that we are looking for, you just want to download the zip file and upload them with a link attached in here to grab the file you get.Then we can have a look at the files contained in them.
We are looking for the magical developmental unlocked bootloader that we can make our own update zip file, with just the bootloader that is unlockable, in it.
Again don't apply the updates that you get from this process. You may brick your phone or worse, permanantly be unable to root or unlock the boot loader.
This is a cat and mouse type of a thing wiith thses big phone makers.
Jim
Sent from my MB865 using XDA App
I was just on the Google Code website and noticed there's a Nexus S ICS 4.0.4 download. After I downloaded a program that reads TGZ format, I saw there is 4 or 5 img files for the bootloader, system and so on.
My question is, if I copied the zip file as it was will this be recognized by the handset and install as expected or will it just screw things up. The reason I ask is, the previous versions I installed were not like this.
Also I noticed there is some Linux shell files which obviously aren't intended for Windows.
Any helpful feedback would be good and reassuring.
OK I think after a little investigation, it seems this only the hardware binaries and not the actual complete android system. Unless somebody can tell me otherwise.
A quick look through the general nexus s forum would tell you what u want to know.
Hmmm......
So in order to ask a question, I have to check whether somebody asked the same one on my behalf.
Granted but I did do a quick check and never seen nothing jumping out at me. So is there any need to be patronising? As it happens I answered my own question. Just because I have less than 10 posts doesn't automatically make me a numpty.
I was not patronizing.
Being that you noticed the page on google code and are here on xda its just frankly common sense to not search but just look at the general forum
I told you where to get the answers man. There is no logical reason to explain it when it was all explained already this weekend on the same forum.
Patronizing by directing you towards all the info you need. Can't make this up.
interpolate said:
I was just on the Google Code website and noticed there's a Nexus S ICS 4.0.4 download. After I downloaded a program that reads TGZ format, I saw there is 4 or 5 img files for the bootloader, system and so on.
My question is, if I copied the zip file as it was will this be recognized by the handset and install as expected or will it just screw things up. The reason I ask is, the previous versions I installed were not like this.
Also I noticed there is some Linux shell files which obviously aren't intended for Windows.
Any helpful feedback would be good and reassuring.
Click to expand...
Click to collapse
http://www.androidpolice.com/2012/0...ady-to-flash-appears-to-be-the-final-version/
Sent from my Nexus S 4G using XDA
Whether or not you were condescending to me or not isn't a concern of mine. Anyway I have the GSM model as I live in the UK. Just need to check near the end of the month I guess.
Just flash these files on bootloader (while phone is connected to PC and its driver is installed and adb is running in cmd)
Fastboot (--blah,blah.....)
Hmmm...
I need to reinstall of those files. As I recently formatted my main drive. Still have hundreds of things to reinstate.
Here it is.
It took me about an hour to download it so I figured I'd upload it for those of you who don't want to wait/want to play around with the files.
Dudash said:
I just finished downloading and uploaded it to my google drive because I don't have dev status on ADF yet.
Here it is.
I haven't been able to install it yet because I have to re-flash the OA2 firmware before it will install.
Click to expand...
Click to collapse
Needed to request access, but thanks for bringing this to my attention. Where'd you see the NU had a LP update, I'm not seeing it on any of the usual websites?
thisisapoorusernamechoice said:
Needed to request access, but thanks for bringing this to my attention. Where'd you see the NU had a LP update, I'm not seeing it on any of the usual websites?
Click to expand...
Click to collapse
I just changed access to anyone with the link can download it. Sorry about that. lol
I randomly checked for updates through Settings and it started downloading it.
Dudash said:
I just changed access to anyone with the link can download it. Sorry about that. lol
I randomly checked for updates through Settings and it started downloading it.
Click to expand...
Click to collapse
Thanks got it you're the man! :good:
Crap I got a corrupted download on two different computers, error message: "C:\Users\MyName\Downloads\update.zip: Unexpected end of archive" and the zip only has a META-INF folder, and what I assume is supposed to be the updater-script is named, "androà+g" and contains only the following:
Code:
post-build=samsung/matissewifiue/matissewifiue:5.0.2/LRX22G/T530NUUEU1BOE5:user/release-keys
post-timestamp=1431596177
pre-build=samsung/matissewifiue/matissewifiue:4.4.2/KOT49H/T530NUUEU1AOA2:user/release-keys
pre-device=matissewifiue
Although it is nice to know the build number lol (OE5).
thisisapoorusernamechoice said:
Crap I got a corrupted download on two different computers, error message: "C:\Users\MyName\Downloads\update.zip: Unexpected end of archive" and the zip only has a META-INF folder, and what I assume is supposed to be the updater-script is named, "androà+g" and contains only the following:
Code:
post-build=samsung/matissewifiue/matissewifiue:5.0.2/LRX22G/T530NUUEU1BOE5:user/release-keys
post-timestamp=1431596177
pre-build=samsung/matissewifiue/matissewifiue:4.4.2/KOT49H/T530NUUEU1AOA2:user/release-keys
pre-device=matissewifiue
Although it is nice to know the build number lol (OE5).
Click to expand...
Click to collapse
Thats.. odd..
The file I uploaded is the same file I used to update.
I just got done installing it after doing it the long way because I didnt want to wait another 1hr+ for it to redownload.
Here's my "long ass method"
1. I reflashed OA2
2. Flashed the rootable kernel
3. Towel rooted
4. Used a ES File Explorer to copy the update.zip from my sd card to data/fota
5. Flashed the OA2 kernel
6. Installed SuperSU, didnt let it update the binary, then used the Full Unroot option
7. Rebooted and it informed me that it had the update ready to install when I checked for updates again.
You may just have to deal with the forever long download.
EDIT: Although I just tried to open the original update.zip on my computer and it gives me errors too saying it can't open it, it's not a valid archive file, blah blah, etc. It may flash if you do my method tho. The worst that could happen is it would fail mid-update.
Oh and fyi, as expected, the TWRP root method works.
Dudash said:
You may just have to deal with the forever long download.
Click to expand...
Click to collapse
This is what I suspected/was afraid of. Thanks for the response, and listing your steps, I figured something like this was the scenario, now I know for sure. Oh well, I'll just have to wait to do the update when I actually have some free time :silly:
Also thank you very much for confirming TWRP root method works, that'll make my life a lot easier, and I'm sure a flood of users will be glad to learn that soon
It is odd that the build number is OE5 cus if I'm not mistaken, that's the highest build number of any of Samsung's tablets right now. Even the Tab S. lol. I guess it was worth the few weeks we had to wait.
Dudash said:
It is odd that the build number is OE5 cus if I'm not mistaken, that's the highest build number of any of Samsung's tablets right now. Even the Tab S. lol. I guess it was worth the few weeks we had to wait.
Click to expand...
Click to collapse
O = 2015
E = May
5 = Completed around the middle of the month Revision number
Source
thisisapoorusernamechoice said:
O = 2015
E = May
5 = Completed around the middle of the month Revision number
Source
Click to expand...
Click to collapse
EDIT: Nvm.
Btw, I just finished uploading the update.zip to AFH so maybe it'll be better if it's from there? /shrug
LINK
5.0 stock 530NU is ready http://samsung-updates.com/details/46354//SM-T530NU/XAR/T530NUUEU1BOE5.html
Checking now, will confirm when done