http://forums.t-mobile.com/tmbl/board/message?board.id=87&thread.id=30842
He took a screen shot of it here: http://m.flickr.com/#/photos/soreco/3249188324/
No word on what the changes are yet.
LOL, i dont wanna believe it then finally find out it's just a sick joke but the screenshot looks real though
wpbcubsfan said:
http://forums.t-mobile.com/tmbl/board/message?board.id=87&thread.id=30842
He took a screen shot of it here: http://m.flickr.com/#/photos/soreco/3249188324/
No word on what the changes are yet.
Click to expand...
Click to collapse
Somebody wake up JesusFreake!! Where's Koush?
Is it possible to pull an OTA and then take it off the device with ADB without installing it?
hmmm.
I'm gonna have to go with it being a hoax... I believe that Google even confirmed that the new cupcake branch upate would be called RC31.
Looks legit to me. Seems to be a tmobile version of adp 1.1.
dwang said:
Looks legit to me. Seems to be a tmobile version of adp 1.1.
Click to expand...
Click to collapse
I agree with the legitimate part. The kernel, baseband, and build ID numbers all look rationally composed/upgraydded. As long as they don't "fix" the SPL or lock out test keys, I'm ok with a little bump for now.
I'm still waiting to see if this is real or not but I did notice something on the google android issues site that made me think we were getting close. Usually the last thing you test before release are upgrade scenarios.
[imported from Google's internal bug database]
STEPS TO REPRODUCE:
1. Dream device was running a pre-cupcake userdebug. within the last week
or so I had previously downloaded a set of files from browser, a couple
market apps, etc
2. Flashed cupcake userdebug, without wiping data
EXPECTED RESULTS:
On device boot-up, none of the previous notifications would be displayed
OBSERVED RESULTS:
The home screen displayed 13 or so "download complete" notifications that
were previously dismissed.
I then selected 'Clear Notifications'
Result -> Notifications cleared, then approximately 5 seconds later
reappeared, then immediately disappeared again.
Click to expand...
Click to collapse
http://code.google.com/p/android/is...ID Type Version Security Status Owner Summary
Also I'm not sure if the flashing they are referring to is the way you would test an OTA update.
This might be a false alarm.... but I hope not
The guy in the original thread said there's google voice searching.
Just got an email about:
To ensure a great experiance with the T-mobile G1 with Google, customers with these devices will receive an Over the Air (OTA) update to their devices between February 5 and February 15. The OTA will include new system enhancements such as the ability to save pictures or files by long-pressing an item, check for system updates, and use the Google Voice Search feature. The OTA will also fix a number of known issues. New G1 activations will receive the OTA up to three days after service has been activated.
Just IM'ed the lord of the Dream.... we'll see what he says?
And still no cupcake.
coolbho3000 said:
And still no cupcake.
Click to expand...
Click to collapse
Wehhh wehhh...
Go play on the market where people care what you have to say.
rynosaur said:
Somebody wake up JesusFreake!! Where's Koush?
Is it possible to pull an OTA and then take it off the device with ADB without installing it?
Click to expand...
Click to collapse
Yes. It will be saved in /cache. All I need is the name of the zip file, and I can download it directly from google.
Everyone with RC30 check your logcat log for any sign of a zip file
something like
logcat -d V | grep zip
I got the same email that speoples20 got.
RC33 is an official update from T-Mobile to start being pushed out to the general public feb 5th to feb 15th and then for all new activations within 3 days.
speoples20 did you notice that The Forecast was dated February 2, 2008? Looks like T-Mobile came up with a time warp while making the OTA.
Just to clarify....
EVERYONE ON RC30 (JF OR NOT)
The reason for this is once JF has the file name, he will be able to download it.
NOT THE SD CARD CACHE!!!
Open Terminal Emulator
SU--Enter
Type in CD /cache
Type in LS
Now if that comes up empty, type THIS in and tell us if you see a log entry containing the file name:
logcat -d V | grep zip (enter)
The alarm has been rung!
http://code.google.com/android/migrating/m5-0.9/changes/android.content.Intent.html
can FOTA_UPDATE_ACTION or any of the other FOTA_* functions help out?
Also, you could try to force an update. Download and install anycut (if you haven't already ), and then make a shortcut to the "Device Info" activity. Open it up, go down to the bottom and click "check for update". If it starts downloading the file, I think it should say the name of the file on that same screen. If not, open up a terminal emulator and look in /cache, or try the logcat command:
logcat -d V | grep zip
CHECKIN_SUCCESS but no pending upgrades or downloads
I'm guessing that will be the case until Feb 5th or later for everyone else too.
ok word has spread fast about this issue at he AC and some people are asking from over here are asking JF users to still look for the zip file in the cache. but here is my question, will it even help? I ask because I am not sure about this:
All of us that have root are not supposed to be updated automatically. Now does that mean that the ota is downloaded by the phone and just never auto installed or does it mean that the file can never be downloaded ota?
Related
I just got a message saying there is an update available. I told it not to do it. I do not want RC30 because it gets rid of root.
However, the other side of me is tempted to see if telnetd and all the other goodies are still there.
I'm also very tempted to install it to see if it removes root access. I hope someone who doesn't care about root access tests this out and reports back soon, because my curiosity is about to get the better of me.
It won't stop prompting me and I don't think I have the heart to keep saying no.
Look on your phone, and see if there is a file named "update.install" in the /cache folder. Or maybe in the /cache/recovery folder. If so, would you mind grabbing it off your phone and posting it somewhere?
Woobins said:
I'm also very tempted to install it to see if it removes root access. I hope someone who doesn't care about root access tests this out and reports back soon, because my curiosity is about to get the better of me.
It won't stop prompting me and I don't think I have the heart to keep saying no.
Click to expand...
Click to collapse
If you ever do say yes can you tell us what your software version is?
JesusFreke said:
Look on your phone, and see if there is a file named "update.install" in the /cache folder. Or maybe in the /cache/recovery folder. If so, would you mind grabbing it off your phone and posting it somewhere?
Click to expand...
Click to collapse
neoobs said:
If you ever do say yes can you tell us what your software version is?
Click to expand...
Click to collapse
The only file of interest in the /cache directory is named, signed-RC30-from-RC29-fat.1582cace.zip. From this I'm assuming it's going to update my phone to RC30. I've made the file available here in case anyone is curious.
Ah, ok. It looks like that's the same file I just posted a link to then. Thanks
boo
neoobs said:
If you ever do say yes can you tell us what your software version is?
Click to expand...
Click to collapse
It did it.
just as I get home to catch up on the "jailbreak" and start doing it I get an
error while connecting to server, "connection refused"
error while receiving from server null
So I figured I'd check (I neglect my phone when I'm at work, and no, I don't recall accepting the update)
lo and behold:
Build description: kila-user 1.0 TC4-RC30 116143
ota-rel-keys, release-keysBuild ID: TC4-RC30
Build Date: Fri Oct 31 19:00:53 PDT 2008
Build type: user
Phone type: dream
Product brand: tmobile
Build user: android-build
Build host: undroid11.corp.google.com
Linux kernel version: 2.6.25-01843-gfea26b0
[email protected] #6Mon Oct 6 14:13:36 PDT 2008Baseband version: 62.33.20.08H_1.22.12.29
RIL Impl version: HTC-RIL 1.0 (Aug 19 2008,21:32:33)
Default keyboard device: trout-keypad-v3
That just proves that RC30 is specificaly out to close the telnet jailbreak method.
No need to apply it to patch/update other parts of the OS since it doesn't have anything else.
MMTest97 said:
error while connecting to server, "connection refused" error while receiving from server null
Click to expand...
Click to collapse
After starting telentd via pTerminal?
quedijo said:
That just proves that RC30 is specificaly out to close the telnet jailbreak method.
No need to apply it to patch/update other parts of the OS since it doesn't have anything else.
After starting telentd via pTerminal?
Click to expand...
Click to collapse
It has more than just that fix. It patches quite a few other packages on the phone... for what purpose? I don't know.
quedijo said:
That just proves that RC30 is specificaly out to close the telnet jailbreak method.
No need to apply it to patch/update other parts of the OS since it doesn't have anything else.
After starting telentd via pTerminal?
Click to expand...
Click to collapse
yes
tried pterminal and terminal emulator
netstat shows the ip
but telnet from pc fails to connect failed on port 23 and the port shown on netstat
I also tried the steps koush put up but still fail
granted I'm no linux/unix pro and I just installed cygwin a couple days after the connect bot app came out; so I may be doing something wrong
Does google check in the new change into the source tree before they push a update?
In addition to jailbreak fix there is a battery fix as well and a few others according to androidcommunity.com.
Well I finally got tired of clicking no and decided to go ahead and perform the update. After it finished, the phone rebooted and instead of booting up, the phone simply displays a '!' icon with a triangle around it and hangs. I'm not taking this as a good sign. I tried removing the battery but that didn't help.
I really hope the update didn't just brick my phone.
Woobins said:
Well I finally got tired of clicking no and decided to go ahead and perform the update. After it finished, the phone rebooted and instead of booting up, the phone simply displays a '!' icon with a triangle around it and hangs. I'm not taking this as a good sign. I tried removing the battery but that didn't help.
I really hope the update didn't just brick my phone.
Click to expand...
Click to collapse
When you're at the screen with the ! and triangle, Try pressing home+back (maybe several times). It should reboot, and hopefully boot back up normally.
JesusFreke said:
When you're at the screen with the ! and triangle, Try pressing home+back (maybe several times). It should reboot, and hopefully boot back up normally.
Click to expand...
Click to collapse
No dice. The phone reboots but still hangs at the error screen. The only thing I can think that might have caused it is that, while playing around, I set a root password and forgot to clear it before the update rebooted the phone. Who knows. I guess I'll call tmobile and see what can be done.
edit: I should mention that pressing alt-w to wipe the phone does not work either. It still returns to the error screen. I'm talking to tmobile tech support now and the original tech said that 'they were informed that a small number of users might experience this problem with the update'. I'm on hold waiting to talk to an android tech now. My advice to everyone who's played around with adding any extra files to /etc to hold off on upgrading for now. I'll report back with the results of my call with the android tech.
Now they're saying they would like to exchange the phone. Problem is the g1 isn't in their replacement program yet.
Aaaand they're out of stock so it's going to be at least 2 weeks.
I wish I'd have just kept hitting no.
Disturbing news, especially as I'm wanting to install a modified rc30. What exactly did you change?
I was playing around with trying to get dropbear to work and in the process I created some files in /etc (passwd, shadow, groups, etc). As well as creating a new regular user, I also added a password to the root account and carelessly forgot to remove it before applying the update. I'm only guessing here but I wouldn't be surprised if the new root password is what did it. The system does not have one by default and I wonder if that caused it to hang, waiting for a password to be entered while booting.
On a brighter note, I persisted and was able to get them to send me out a new phone immediatly. This has the added benefit of possibly fixing the loose-screen/creaking problem that I, like many others, am experiencing with the phone.
I'm wondering if I should try manually applying the update from the SD card while I wait for the new phone to see if that solves the problem. I probably should have tried that before calling. I'm hesitant to do that now, however, since if it does fix it, I'm not sure how tmobile would react to me returning a perfectly working phone.
Woobins said:
No dice. The phone reboots but still hangs at the error screen. The only thing I can think that might have caused it is that, while playing around, I set a root password and forgot to clear it before the update rebooted the phone. Who knows.
Click to expand...
Click to collapse
I don't get it. The update should restore whole /system folder, isn't it? /etc is actually a symlink to /system/etc, so, it should be restored too and passwd file successively removed.
Otherwise, I don't see any problem to keep the root access! Since /system is mounted without nosiud (any changes in RC30?), just keep a copy of shell with chmod 4777 somewhere there... where it wouldn't be removed by update, as it keeps passwd, and that's it.
Please, tell me where am I wrong, cause I definitely should be wrong somewhere.
PS: BTW, what was the progress with dropbear? I actually tried to make it work too, creating passwd etc, but no success...
Dimath said:
I don't get it. The update should restore whole /system folder, isn't it? /etc is actually a symlink to /system/etc, so, it should be restored too and passwd file successively removed.
Otherwise, I don't see any problem to keep the root access! Since /system is mounted without nosiud (any changes in RC30?), just keep a copy of shell with chmod 4777 somewhere there... where it wouldn't be removed by update, as it keeps passwd, and that's it.
Please, tell me where am I wrong, cause I definitely should be wrong somewhere.
PS: BTW, what was the progress with dropbear? I actually tried to make it work too, creating passwd etc, but no success...
Click to expand...
Click to collapse
Unlike the RC29 update, the RC30 update doesn't actually do a complete wipe and restore of the /system folder. It patches a number of files (which will fail if any of them have been modified), and does a recursive chmod on the entire /system directory to clear any suid bits.
Update: Here's an updated update. This update updates your phone so that it is updated. Note: if you apply this update over the previous update, it updates the update that you had previously updated your phone with, so that you have the most recent update.
This one contains the same stuff as my RC30 v1.2 update. Go read the notes for it over in that thread
Plus! You now get a voice dialer, amazon MP3, and all 4 IM types available on the US firmware (aim, gtalk, windows live and yahoo).
Note: to get the other IM providers, you have to delete the improvider settings after you install the update. Open a terminal and type the following command as root:
rm -r /data/data/com.android.providers.im
Then reboot the phone, and you should have all 4 IM providers available.
And now, for something completely different. A man with 3... err. nevermind, it's just the download link.
http://jf.nyquil.org/update_TC5-RC8_full_xda-dev_v1.2.zip
http://rapidshare.com/files/166186996/update_TC5-RC8_full_xda-dev_v1.2.zip
http://android-dls.com/forum/index.php?f=24&t=190&rb_v=viewtopic (see forum post for actual link to file)
----------------------
As usual, this can only be installed if you have already installed the modified recovery image. If you are running the official RC30 or RC8 build, you won't be able to use this.
To install, rename the file to update.zip, put it on the sd card, and reboot the phone into recovery mode (home + power). Once the recovery mode comes up, press alt+L to turn on the text display, and alt+S to apply the update.
This build can be installed by anyone that has the modified recovery image - it will run on both US or UK phones. Note though, some of the functionality in the US version is missing in the UK version: Voice dialing, myfaves, amazon mp3 store, chat messages via SMS.
And there might be other miscellaneous issues with running this build on a US phone.. possible MMS issues, etc. If you do encounter anything, feel free to post about it (it's good to know what works and doesn't), but don't expect it to be fixed . I may be able to fix some stuff.. but I can't work miracles
For all you people out there that aren't on t-mobile, installing this should fix the myfaves issues that y'all have been having (sending SMSs to t-mobile.. etc.)
Note: you can freely switch between the modded RC30 and modded RC8 build. If you install one and don't like it, you can always switch back.
Big thanks to SGTDavePwnage for finding the download, and for testing out the update! http://forum.xda-developers.com/showthread.php?t=443713
Thank you, sticky while it's hot!
pof said:
Thank you, sticky while it's hot!
Click to expand...
Click to collapse
Ooo. hot AND sticky! I'm gonna have to go pick up some cinnamon rolls now.
Thanks pof
Ooh I'm so going to try that.. no MyFaves..
I'm still nowhere on making my own build... My Ubuntu has decided that I wasn't entitled to networking anymore.. (i hate that thing)
Thanks for your hard work!
No network for you! 1 year!
Just throw Ubuntu on a VM, you'll be building android in no time
Thanks JESUSFREKE, you did magic !
Well, I did screw up my network driver while trying to update the ATI ones.. but don't ask.
So I just updated my phone with your update and..... it seems to work
It took an awful lot of time to reboot so I got scared but it finally came up fine. I still have root of course (thanks so much)
Wifi ok, Camera ok, motion sensor ok.
Data.. I only get Edge, but that could be my provider not having 3G coverage here. To be verified. I don't use it much anyway since in my country the cheapest data plan is $40 for 50Mb.. :|
The dialer does not automatically format number in US format!! Yippee... I know it's a small thing but it was bugging me.
All contacts got lost (of course since they were managed by MyFaves). But syncing worked. With some errors in the background but apparently not too significant.
SMS ok. I'm not sure what you're calling SMS Chat. The SMS app still looks like a chat. I assume it's some T-Mo US feature that I won't miss.
And most important of all Mario Simulator still works fine . Seriously I can't find anything that doesn't work.
There is a new app "web'n'walk" from T-Mo which can not be removed through the normal application manager. If it's not replacing any android service i guess that a little remount and busybox mv should do the trick.
Amazon is indeed missing. I wonder if people who care about it could just copy the .apk and .odex file over and get it back. I don't care about it so I won't try. People still buy music?
I've been looking at logcat while writing this and I couldn't see any crazy SMS behavior.
So all in all a good upgrade for non T-Mo users with a US phone. For what it's worth I recommend it.
re: rc8 mod
nice work ppl
JesusFreke said:
Here's your TC5-RC8 build, complete with root access. Get it while it's hot!
Click to expand...
Click to collapse
Hopefully I'm not being stupid - but is this the one for the UK? Whats the difference between RC30 and TC5-RC8 ?
Thanks for your hard work. T-Mobile in the UK have pushed out their update today - it keeps asking me if I want it (which I keep saying no) but need to make sure I get the correct image!
Yes, this is for the UK. (but will work on US handsets)
It is the new update that is currently being pushed out by T-mobile uk (but modified to keep root)
Functionally its not that different to RC7.
Think of it as the equivalent to RC30 (with all the nice US bits removed)
If i already installed the Modded RC30 update using the step by step in this forum..
do i just put this on my SD card and go into recovery mode and hit Alt+S
or do i have to do all the steps again?
i do not know if i have root or not... i tried a chmod on a font file and it wouldn;t let me.. even when i put "su"
said it was a read-only file system
knowledge_6 said:
If i already installed the Modded RC30 update using the step by step in this forum..
do i just put this on my SD card and go into recovery mode and hit Alt+S
or do i have to do all the steps again?
i do not know if i have root or not... i tried a chmod on a font file and it wouldn;t let me.. even when i put "su"
said it was a read-only file system
Click to expand...
Click to collapse
Assuming you have correctly installed the modded RC30, you just need to rename the zip to update.zip and put this on your SD card and go into recovery mode and hit Alt+S.
To check if you have root, try re-mounting (mount -oremount,rw /dev/block/mtdblock3 /system)
thanks once i find a wifi connection i shall try it before i update. I am not on tmobile and mainly want this update to prevent text messages being sent out..
Work = WPA2 enterprise wifi ; <
knowledge_6 said:
thanks once i find a wifi connection i shall try it before i update. I am not on tmobile and mainly want this update to prevent text messages being sent out..
Work = WPA2 enterprise wifi ; <
Click to expand...
Click to collapse
Wi-Fi connection?? if your talking about telnet'ing the device, try installing the terminal from the marketplace instead and give it a go that way.
ahh alright.. i have the terminal emulator so i shall try that
tried it and i got
"operation not permitted"
did i F'up on installing the modded RC30?
when went into recovery mode when installing the RC30 update it said testkeys at the top ; <
dammit
EDIT: nevermind stupid mistake didn't tye SU
just a heads up..
this erases all your contacts.. so make sure u back it up.. good thing i had it all on my sim card..
the RC30 update kept my contacts intact ..
knowledge_6 said:
just a heads up..
this erases all your contacts.. so make sure u back it up.. good thing i had it all on my sim card..
the RC30 update kept my contacts intact ..
Click to expand...
Click to collapse
Yes, the Uk software doesnt use MyFaves (which controls contacts on US software).
That will be one side affect of switching between regions.
You can still re-sync with google and it will re-download them tho.
SGTDavePwnage said:
Yes, the Uk software doesnt use MyFaves (which controls contacts on US software).
That will be one side affect of switching between regions.
You can still re-sync with google and it will re-download them tho.
Click to expand...
Click to collapse
ahh i see.. : > thanks for the help!
works well .. my first call i couldn;t press end .. the call wouldn't disconnect .. but the 2nd and 3rd call i was able to..
i just imported contacts from my sim.. i don't use gmail haha
I have to take my G1 back and probably get an updated one.
I got my black UK G1 out of a T-Mobile shop last Friday and by Sunday they stopped selling them because there was a "bad batch" meaning my dad had to get the white one. Anyhoo...i have a dead pixel (which i can't stop looking at) so i took it back to the shop today but they still don't have black ones so i'll have to wait till Monday...but...i presume i'll end up with an updated one...
If someone posted this already I couldn't find it. I just saw the whole thread about the HTC release. I just got the OTA update notification for my ADP.
44 MB! I wasn't sure if anyone else has had such luck.
Sorry if this has already been stated.
That isn't just an OTA perse. 44mb is the whole firmware itself. Additionally, the ADP 1.5's already been officially posted by HTC.
Dredge said:
If someone posted this already I couldn't find it. I just saw the whole thread about the HTC release. I just got the OTA update notification for my ADP.
44 MB! I wasn't sure if anyone else has had such luck.
Sorry if this has already been stated.
Click to expand...
Click to collapse
Can you post the download link ? ADP is release by google then I think this FW will be different from last 1.5 FW from HTC
no its the same... infact 3 threads down
http://www.htc.com/www/support/android/adp.html
That is the manual link (for ADP1.0) to upgrade, as only ADP1.1 has the ability to do OTA. The OTA you got was just that one (released a few days ago).
I just got the OTA 1.5 update too. Not sure if I'm gonna install it though, I want the JF candy.
Did a search on Twitter. Looks like many people are getting the OTA update tonight. Happy joy.
Ok, so I decided to install it after all. Man that was fast. I read a few reviews about the 1.5 fw yesterday (probably the HTC one) and they said the install took several minutes. For me it was as quick as applying a theme, took a minute, tops, plus roughly 30 seconds to boot.
I went straight from JFv1.43 ADP1.1h to this one, no wipe. Everything just worked brilliantly.
Ok, now I'm off to play around with it. First impression though: Man this thing is fast, compared to 1.1.
First problem, and it's a big one. No Market. It'll start, but then autoclose half a second later. Also, I can't log on to youtube (I can't find a way to log in, am I blind?), so I can't upload videos I shoot.
mannyb said:
First problem, and it's a big one. No Market. It'll start, but then autoclose half a second later. Also, I can't log on to youtube (I can't find a way to log in, am I blind?), so I can't upload videos I shoot.
Click to expand...
Click to collapse
It's probably because you didn't do a wipe :/ and just go to the video you want and select share and it should give you youtube as an option.
mannyb said:
First problem, and it's a big one. No Market. It'll start, but then autoclose half a second later. Also, I can't log on to youtube (I can't find a way to log in, am I blind?), so I can't upload videos I shoot.
Click to expand...
Click to collapse
you didn't wipe... but then again I dunno, I went from JF 1.42 to Haykuros 1.5.2 and everything works for me flawlessly
Shindokie said:
It's probably because you didn't do a wipe :/ and just go to the video you want and select share and it should give you youtube as an option.
Click to expand...
Click to collapse
Yeah, I suspect I need to wipe and reinstall the damn thing.
That's what I did. I went to Camera Videos, long press the video, chose YouTube, got this message: "Cannot upload, no user account information available."
So... where do I enter the user account info?
mannyb said:
Yeah, I suspect I need to wipe and reinstall the damn thing.
That's what I did. I went to Camera Videos, long press the video, chose YouTube, got this message: "Cannot upload, no user account information available."
So... where do I enter the user account info?
Click to expand...
Click to collapse
I think you have to flash it first and maybe that's the reason many of the things you are trying to do are not working, flash and see if that's why.
Shindokie said:
I think you have to flash it first and maybe that's the reason many of the things you are trying to do are not working, flash and see if that's why.
Click to expand...
Click to collapse
Will do.
Thanks!
You have to sign into your youtube account through the youtube app if you don't have your gmail and youtube accounts linked. If they are linked then it should already be signed in.
speoples20 said:
You have to sign into your youtube account through the youtube app if you don't have your gmail and youtube accounts linked. If they are linked then it should already be signed in.
Click to expand...
Click to collapse
They're not linked.
I sign in via the "My account" menu option in the YouTube app? Nothing happens when I press that option. Nothing at all.
Seems I need to wipe. Now I'm just looking for the right 1.5 update.zip to apply after the wipe. I'm not sure if the one available via HTC is the exact same one you get from the Google OTA.
Nobody going to search logcat and find the url? comeon ppl, help the community out ;P
Hi,
i installed the update, but i lost superuser i had jf1.42 adp fw before. i like new features of android 1.5, but root is more important to me. Strange that it still looks like ADP, when i wiped data and booted, it showed "Welcome to Android Dev Phone 1", but no root there...
is there some way to get it again, or i have to downgradu to rc29/rc7 again?
thanks
mannyb said:
First problem, and it's a big one. No Market. It'll start, but then autoclose half a second later. Also, I can't log on to youtube (I can't find a way to log in, am I blind?), so I can't upload videos I shoot.
Click to expand...
Click to collapse
Haven't tried youtube, but no problems with Market on my ADP (going from from JFv1.43 ADP1.1h to HTC 1.5) or anything else I've noticed. Did a complete wipe tho.
Finally MyTracks works with uploading tracks to MyMaps, which it refused to do with JF 1.43!
/Mats
mzet said:
is there some way to get it again, or i have to downgradu to rc29/rc7 again?
Click to expand...
Click to collapse
Yes, it's really easy - it's somewhere in the ADP 1.5 is out!!! thread.
A few lines using adb shell and you're back to normal - Ah here it is:
adb shell
# mount -o remount,rw /dev/block/mtdblock3 /system
# cat /system/bin/sh > /system/bin/su
# chmod 4755 /system/bin/su
/Mats
i can't use mount, if i am not root:
Code:
$ mount -o remount,rw /dev/block/mtdblock3 /system
mount: Operation not permitted
I will be accepting donations if you like my work. After contacting HTC, they informed me that my device is not under warranty, as a technician determined it to be "user related" damage and that all repairs will be at owner expense.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8141983
If you follow my twitter, you know I bricked my G1. I am trying to get it repaired, but due to the long response time I had to buy a mytouch (no point having two G1s IF the other one gets repaired). Using this bad luck to my advantage, I scripted a way for hero to run on both with two simple commands.
How I rooted a brand new "perfected SPL" MT3G and installed Hero in 15 min:
http://forum.xda-developers.com/show...&postcount=154
Link to original thread: http://forum.xda-developers.com/showthread.php?p=4365404#post4365404
Updated, but still feeling slow? Back up. Try rm system/sd/app_s then reboot to recovery and wipe data. then install fresh. Before restoring your data, open the backup folder on your sd card and remove the subfolders for programs you no longer have or need to have backed up.
I noticed a 10% increase in speed and my phone was far from lagging to begin with.
Losing messages? Make sure that system/sd/app/com.android.mms.apk does NOT exist, as this was an old release. Go into settings for messaging (from the conversation list panel) and set priority to "High"
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.0.zip
Now includes dynamic swap. Rewrote the method of apps to sd for myTouch.
Build will move system apps, user apps, and dalvik to sd on a g1 device.
Build will ONLY move user apps to the sd when using a myTouch.
This will allow the system apps and dalvik to remain on internal device.
This is a completely new method of doing a merge build so bear with me.
I am going to be rewriting things for users without a lot of user apps, like myself.
This will allow the entire build to be placed onto internal for mytouch users.
Once you have updated and are ready to use the phone, execute Terminal and enter the following commands:
su
magic
This configures the system to the specific device. This is until I finish automation.
LEDs have been restored to 93%
Bluetooth restored in MT3G
Porting my own boots for MT3G
Based on the System Image from Haykuro
Using the Kernel and Boot.img from JAC
Extensive system script edits were done
SwitchROM installs itself to system/sd/
LEDs are at about 90-100% brightness
CPU Optimization turned off by default
Enhanced Terminal included
Fixed My Account included
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r5.zip
http://twistedumbrella.slackdev.com/Resources.zip
twistedumbrella said:
MultiTouch for MT3G being patched NOW
Click to expand...
Click to collapse
Does that mean multitouch doesn't work and one more unanswered questio IS it from the latest release that modaco did, i asked it since 5.0 so please answer
White Rosie doesn't work i tried it but i doesn't show up and it doesn't even install shows parse error, can you do something about that. Really appreciate your work. Will donate as soon i finish with my exams, I came to US for a holiday for 3 months and as i came back i have exams, only 3 left, have to finish 6 books per subject (thats f*****ng 3 months syllabus) and i have exams after 2 day holidays , thats why i have been a bit inactive in the community, will be active on 24 and will provide a special version of HERO based on my favourite ZEROXD.
Installed JACHeroSki 2.0 and i get stuck on a boot loop. i've tried wiping and re-flashing and same thing.
mgorman said:
Installed JACHeroSki 2.0 and i get stuck on a boot loop. i've tried wiping and re-flashing and same thing.
Click to expand...
Click to collapse
For me 2.0 working fine,but cannot install ZeroXd-5.2r4-installation aborted:/
In v2.0 cannot run wifi:/somebody else?
Had to fix scripts. Check the link on original thread for download. They are the same files. The verification fail happens when your downloading as I upload. It was a last minute fix on the way to work. Sorry for the issues.
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
tq745 said:
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
Click to expand...
Click to collapse
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
tq745 said:
hey twisted...great work on the roms...
couple issues with me...
auto-rotate doesn't work...
auto correct and dictionary doesn't work also...
is there any way we can correct this?
Click to expand...
Click to collapse
Thank you... h.nocturna for the fix, and nacron for the heads up...
Here is the fix for auto-complete... Worked for me on 5.1r2
Everything in
open dos prompt.
adb remount
(***back up the original***)
adb pull /system/sd/app_s/HTC_IME.apk c:\(*your directory*)\HTC_IME.apk
(***install the new one***)
adb push c:\(*your directory*)\HTC_IME.apk /system/sd/app_s/HTC_IME.apk
start your Messaging it will crash the first time you want to use the keyboard... restart Messaging and it should work...
HTC_IME.apk here: http://www.mediafire.com/?te0symyx4yz
Mms auto-rotate works for me in 5.1r2 so I dont know. But possibly you still have the old Mms.apk. Try pushing the new one from 5.0 or later rom...
Twisted are you using BFS in your new builds??? Post 5.1 that is....
twistedumbrella said:
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
Click to expand...
Click to collapse
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambesey's way
twistedumbrella said:
What device are you using? MyTouch? Did you run the terminal command?
BTW, for everyone else: http://twistedumbrella.slackdev.com/user.conf
Did some testing, seems to run a little smoother
Click to expand...
Click to collapse
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambezy's way
same issue as above :-(
1.8 is running pretty awesome.
i guess its safe to assume that i shouldn't try 2.0 yet? lol
zeroxd 5.2r4 seems to be faster than jacs 2.0 but i cant get auto rotate to work or multitouch and when i try the commands in first post i get "/system/xbin/su: not found''
did you try running the commands via adb ?
im not familiar with doing it that way i dnt even know wat adb is
just connect your phone to the pc
install the drivers from android SDK
start > run > cmd
cd to the android tools directory
and adb shell
that's how i did with my phone and works perfectly
im not gona risk any damage ill deal without the rotate for a day till its fixed
tq745 said:
so i opened up better terminal and when i entered su it says
/system/xbin/su: not found
help?
in the meantime i'll try zambezy's way
Click to expand...
Click to collapse
should be under /system/bin not xbin
I AM NOT RESPONSIBLE FOR ANY HARM DONE TO YOUR DEVICE THROUGH METHODS MENTIONED BELOW. THESE METHODS WILL DOWNLOAD UPDATES THAT WILL WANT TO INSTALL. DO NOT INSTALL THEM THEY MAY BRICK YOUR DEVICE. STICK TO THE INSTRUCTIONS BELOW AND YOU SHOULD BE FINE.
Also note it may be weeks, perhaps months before Atrix 2 updates begin rolling in. It's a very new device!
Now, the fastest way we are going to get this Bootloader unlocked is with a little ol' fashioned teamwork. These methods have worked for other devices but require some participation and patience.
Previous devices having used the method:
Bionic
ATRIX 4G
Here are the methods we will be using:
1.Motorola, ATT SBF files for Motorola Atrix 2
2.Project Cheesecake - finding update versions on Motorola servers
1. SBF files
If you or someone you know is able to provide SBF Files intended for the Atrix 2, you can post them here or email them to me at [email protected] if anonymity is an issue.
2. The tried and tested Project Cheesecake!
Automatic Method:
What you will need
1.an ADB setup.
2.Obviously, Root.
3.ClockworkMod Recovery set up on the phone.
4.You should have an FXZ Ready in case you mess up.
5.Root Explorer from market
Now an app does it all for you. Imagine that.
1. Okay, so, download THIS APP RIGHT HERE.
2. Install the app on your phone.
3. Open the app. Click the first button.
4. Reboot.
5. Open app, click second button. Select a server. QA And Staging servers seem most common for updates, but we need to check them all. The default is in Production -> master-blur.whatever.com if you need to get back to it.
6. now click third button in app to check for update. click setup (the moto account thing is bs). Now if it gives you a wifi error, that means the server is down that you chose. If the server is up it will check for an update.
7. If that didn't work, select a new server with button 2, and then check again with button 3.
8. Any comments in this post about the ghettoness of my app will result in replies including but not limited to A) Slander, B) flaming, and C) death. Try to keep the thread pretty on topic to cheesecake method and other info. I know my app can be refined, jcase has been giving me some tips on streamlining my programming and su permission reduction, but it does good stuff, don't worry. It even remounts system as RO when it uses it.
9. godspeed, guys.
What do I do if my phone finds an update?
if you are uncomfortable dealing with it for sake of bricks / other bad stuff, let someone else know or post it in the thread. It will be attended to properly.
DO NOT INSTALL IT. IF YOU FEEL COMFORTABLE YOU CAN DOWNLOAD IT
Depending on what the update contains, it could brick your device. Get in touch with a developer ASAP if you don't know what to do. Post in this thread which server you found it on. load up adb. The file you found should exist somewhere in /cache. pull it to your computer. Then delete it. Be warned that the update after downloaded tries to install every 2 minutes and while typing a text i accidentally clicked install once. I almost messed myself up.
log onto chat.andirc.net and go to #bionic. You might find me in there.
Log onto irc.freenode.net and join #droidbionic and #bionic-dev. The bionic-dev channel is ONLY for dev-related talk. If you just want to kick it, converse in #droidbionic.
Someone experienced here can help you, and let you know what you've found.
If you liked my work here, click the thanks button at the bottom of this post! Thank you all for reading.
Click to expand...
Click to collapse
Link to original topic:http://forum.xda-developers.com/showthread.php?t=1281675
Manual Method:
Instructions:
List of servers:
Code:
master-lab.blurdev.com
master-demo.blurdev.com
master-dev.blurdev.com
master-qa1.blurdev.com
master-qa2.blurdev.com
master-qa3.blurdev.com
master-qa4.blurdev.com
master-staging1.blurdev.com
master-sdc1.svcmot.com
master-blur.svcmot.com
master-homer.blurdev.com
master-bart.blurdev.com
master-lisa.blurdev.com
master-maggie.blurdev.com
master-marge.blurdev.com
master-bqa1.blurdev.com
master-bqa2.blurdev.com
testcloud01-sdc1.blurdev.com
1.Root the device
2.Navigate to /system/etc/motorola/com.motorola.blur.service.blur/ in a root file explorer [ie. Root Explorer]
3.Edit data_wifi_only_settings.mkitso. Replace "data_wifi_only_feat_avail=1" with "data_wifi_only_feat_avail=0"
4.Edit defaults.xml. Replace the entire file contents with:
Code:
<map><string name='blur.service.ws.useApnProxy'>0</string><string name='blur.service.ws.masterCloud'>master-lab.blurdev.com</string></map>
5.to /system/etc/motorola/com.motorola.blur.setup in a root file explorer and Edit defaults.xml. Replace the entire file contents with(you settings may already look like this, if so ignore it):
Code:
<?xml version='1.0' encoding='UTF-8'?>
<map>
<boolean name='AllowActiveSync' value='true'/>
<boolean name='ShowSkipSetupMenu' value='true'/>
<boolean name='ShowConnectionChooser' value='true'/>
<boolean name='ShowDataSaverInSetup' value='true'/>
<boolean name='WifiPreference' value='true'/>
<boolean name='loc_consent_unchecked' value='false'/>
<boolean name='CloudPreference' value='true'/></map>
6.Wipe data and cache
7.Navigate to Settings > About Phone > System Updates
8.If it says "Update Available," let the update download. Do not install the update, because it could potentially brick your device.
9.Pull the update.zip file from /cache [Root Explorer or ADB] and upload/post the file for developer interest
10.Continue to test the next server. Navigate to /system/etc/motorola/com.motorola.blur.service.blur
11.Mount the folder as read/write
12.Edit defaults.xml. Remove "master-lab.blurdev.com" and put in the URL for the next server.
13.Repeat the steps from "Wipe data and cache" every time.
Click to expand...
Click to collapse
Credits: They all deserve thanks so if you see them around the forum, or wish to go to their original topics click that button!
- eval- for his initial discovery on the Atrix 4G
- Navalynt for scanning servers
- SamCripp, the2dcour - working on "Project Cheesecake" and "Pudding" unlock projects
-kennethpenn for the instructions as well as setup.
-Phydo for automatic method and app!
We might try this. It automates the process. All the credit goes to phydo for this though. I am looking at it now to see if we can try it on our Atrix 2
http://forum.xda-developers.com/showthread.php?t=1281675
Jim
I saw that as well... Let me know if its working on the ATRIX 2 and I'll edit the topic accordingly. Thanks again for your continued interest, I really appreciate it.
Sent from my MB865 using XDA App
Phydo's app works beautifully. I installed and ran it on severall of the servers, if it asks to setup and account just click setup... then if it asks to setup a wifi connection then that server is down, which I am getting on most of them right now as would be expected.
Jim
Works flawlessly on my end too.. updated the first post with instructions.
Sent from my MB865 using XDA App
Just pulled Blur_Version.55.11.16.MB865.ATT.en.US.zip with cheesecake.
Judging only by the number in the filename, this is the stock version of blur... probably.
Can't post links so...
Awesome man! I'll check it out!
It's only 50 megs so I don't think it's the full filesytem.
This might be the update from the mythical 2.3.4 version listed on the moto dev site.
edit: I see some recent timestamps... system\etc\motorola\ap_flex_version.txt
Code:
GAS_NA_EDSNGBATT_P015
Sat Oct 29 10:13:33 PDT 2011
derp derp
Code:
Blur_Version.55.13.15.MB865.ATT.en.US %Blur_Version.55.11.16.MB865.ATT.en.US
Went ahead and too a giant leap and upgraded.
After a few harrowing minutes, it was updated to 55.13.15
Android version is 2.3.6
Baseband is
2011-10-28 12:44 Off.Bld
LUD_EDISON_R1D7_PATCH_34_111028_1226
Webtop has been updated, looks like firefox 7.0.1 is installed now, can't test it myself.
Getting prompts from motorola to "upgrade".
Lost root in the update. Going to try to get it back...
Edit: Root works!
Code:
fastboot oem unlock
... FAILED (remote: unsupported command)
what files were in the update? was there an fxz or an sbf? were there any files with I think mbl in the name? Those would be the bootloader, if so we need to take a look at them. I will put it down and check it out.
I am not quite ready to install that yet, since I am on the right track to have a FULL ubuntu desktop running in webtop, right now I have broken tomoyo, so no facls, or security on the webtop files, and I have a terminal and sudo, as well as synaptic, so I will hold off on 2.3.6 for now, since there is a webtop update in there.
I will start a new thread for the webtop stuff once I have more. Now I need to get with tallnerd1985 to get webtop2sd working on our phones.
Jim
Thank You for warning everyone else even while you are still having trouble. You can take it back to At&t/Bestbuy or wherever you bought it - They won't know and 99% don't care especially about the Atrix 1 or 2...
Just act PISSED! If anyone asks you a question...
Looks like motorola really is trying to push an update to me, 15 MB file update to 55.13.16. I'm not going to touch it for now. Gotta get some sleep
Don't see any SBFs or FXZs...
This is my first rooted android phone, so i'm just flying blind here.
Now that I can post links, here's the one linked to through tinyurl above.
Ok, so in the 55.13.15.MB865.ATT.en.US file, there are 2 boot loaders, one is called prologue_loader.ldr and the other one, which I am guessing is the one we already have is called production_loader.ldr
This will require some more looking to see if the prologue_loader.ldr is unlockable, so that they can load thier updated image, then relock it with the production_loader.ldr
This might be good news and it might be nothing, but I will keep everyone posted, with what I find.
Jim
Keep up the good work guys
Try to find the stock build as well, because if that is found i could probably unbrick my phone!
moofree said:
Looks like motorola really is trying to push an update to me, 15 MB file update to 55.13.16. I'm not going to touch it for now. Gotta get some sleep
http://dl.dropbox.com/u/14536681/Blur_Version.55.13.15.MB865.ATT.en.US.zip
Don't see any SBFs or FXZs...
This is my first rooted android phone, so i'm just flying blind here.
Now that I can post links, here's the one linked to through tinyurl above.
http://dl.dropbox.com/u/14536681/Blur_Version.55.11.16.MB865.ATT.en.US.zip
Click to expand...
Click to collapse
Jimmy273 said:
Try to find the stock build as well, because if that is found i could probably unbrick my phone!
Click to expand...
Click to collapse
Ok use the link above and try to get it on the root of your SD card, I am not sure if that zip file work or not, for CWM or fastboot, if you can connect to ADB with fastboot, you should be able to flash it from that.
Jim
Ok .. this is driving me nuts here. Trying to apply the Blur_Version.55.13.15.MB865.ATT.en.US.zip update to my Atrix 2 .. since there is NO WORKING ClockWorkMod that can be used .. tried doing it other way that jimbridgman suggested and that was fastboot.
Well .. that doesn't work either .. receive error message:
>fastboot -w update Blur_Version.55.13.15.MB865.ATT.en.US.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Anyone else have any ideas of how to apply this update ?
LordGeek said:
Ok .. this is driving me nuts here. Trying to apply the Blur_Version.55.13.15.MB865.ATT.en.US.zip update to my Atrix 2 .. since there is NO WORKING ClockWorkMod that can be used .. tried doing it other way that jimbridgman suggested and that was fastboot.
Well .. that doesn't work either .. receive error message:
>fastboot -w update Blur_Version.55.13.15.MB865.ATT.en.US.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
Anyone else have any ideas of how to apply this update ?
Click to expand...
Click to collapse
Good question, though you'll need to start from the first file...
Blur_Version.55.11.16.MB865.ATT.en.US.zip
I think the filenames are for the versions that the patch gets applied to, not the version it'd be updated to.
This is all new to me, I'm guessing you could boot up with VolumeUp+VolumeDown held down, choose the recovery mode, and do volup+voldown for the recovery menu and choose update, and the zip from that menu...
Edit: This works. Updated from 55.13.15 to 55.13.16
Baseband got pushed back a few days
2011-10-25 11:19 Off.Bld
LUD_EDISON_R1D7_PATCH_33_111025_1101
Lost root again, but thankfully the zergling rush is a highly effective strategy still
-=Insert warning about updating being AT YOUR OWN RISK and not being responsible for bricks etc... =-
Additional warning that this might cut the phone off from official OTA updates from Motorola...
@moofree:
You are correct, I was successful in getting the 2 updates on, and yes, root was lost. However, I was unable to get the root back !!
Tried manually, tried the 1-click.. Neither would give root. So, since I just received the phone the day before from BestBuy, I did the next logical thing.. Bricked it and returned the phone defective.. LOL
So, now I have a replacement, new Atrix 2.. I'm leaving it exactly where it is until either the OTA's come through the right channels, or something more permanent and correctly working has been done for unlocking the bootloader and rooting.
If not.. 30 days from 11/01/11.. Options are still open with the HTC Vivid and SGS2 Skyrocket.
Sent from my MB865 using Tapatalk
I Want to reiterate to everyone who is trying to help unlock the boot loader by using the cheesecake method here that you don't want to apply any of these updates directly. Motorola always relocks the bootloader with 99% of these updates. It will be one of the development versions that we are looking for, you just want to download the zip file and upload them with a link attached in here to grab the file you get.Then we can have a look at the files contained in them.
We are looking for the magical developmental unlocked bootloader that we can make our own update zip file, with just the bootloader that is unlockable, in it.
Again don't apply the updates that you get from this process. You may brick your phone or worse, permanantly be unable to root or unlock the boot loader.
This is a cat and mouse type of a thing wiith thses big phone makers.
Jim
Sent from my MB865 using XDA App