download and install this app from this thread http://forum.xda-developers.com/showthread.php?t=507212
soft reset, and on settings<system you will see Processor icon
it slow down the processor if it is not used, on my UNI down to 19Mhz, charged my UNI to 100% few hours ago, it is still at 100% with Phone turned on.
usually now it would be 85-86%
some users say after working whole day on it to have 60% instead of 10%
post some feedback
Thanks for sharing
Let´s test it...
Just curious... would over or under clocking have any adverse effects on hardware?
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
tomal said:
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
Click to expand...
Click to collapse
Oh, OK tomal, if you say it I believe it.
tomal said:
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
Click to expand...
Click to collapse
it worked. but tnx for your quick trchnical advice. uninstalling....
tomal said:
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
Click to expand...
Click to collapse
Weren't you a bit late? I installed it! Luckily no harm sustained. It didn't work though as processor was of unknown type for this application.
I hope orb3000 is safe, he was earlier than me here.
oqaab said:
tomal said:
Guy's ,
You must not install it in Uni, as it has a different (PXA2XX) processor.[/SIZE ]
[COLOR=red ]Trying it on this device may cause a HW damage!![/COLOR][ /QUOTE]
Weren't you a bit late? I installed it! Luckily no harm sustained. It didn't work though as processor was of unknown type for this application.
I hope orb3000 is safe, he was earlier than me here.
Click to expand...
Click to collapse
Thanks for your concern oqaab
For some stange reason after typing my message on this thread power on my neighbourhood was down for several hours, so I couldnt even download from here to test! Coincidence.......
Damir please be carefull with the stuff you share for others
Without Tomal´s on time intervention a lot of people could damaged their Uni
Nex time please consult an expert before!!!
p.d Please remoe your link for safe
Click to expand...
Click to collapse
orb3000 said:
oqaab said:
Thanks for your concern oqaab
For some stange reason after typing my message on this thread power on my neighbourhood was dow for several hours, so I couldnt even download from here to test!
Damir please be carefull with the stuff you share for others
Without Tomal´s on time intervention a lot of people could damaged their Uni
Please consult the expert before!!!
Click to expand...
Click to collapse
OK, I will.
btw I had this application installed for 2 days and it was working properly, no freezing etc.
but for safety reasons uninstalled it after i read Tomal's post
Click to expand...
Click to collapse
damir-bosna said:
OK, I will.
btw I had this application installed for 2 days and it was working properly, no freezing etc.
but for safety reasons uninstalled it after i read Tomal's post
Click to expand...
Click to collapse
Tomal said 'it may' and not 'it will' so luckly we are safe. But it never worked for me. I mean it installed and opened correctly but processor was never under clocked, it showed fluctuations between 400 and 500 MHz all the time. Never being stable at 19 MHz.
My question remains unanswered... 'does over or under clocking causes any trouble in the long run'? As in the case of Desktop PCs over clocking heats the processor and prolonged use destroys it.
oqaab said:
Tomal said 'it may' and not 'it will' so luckly we are safe. But it never worked for me. I mean it installed and opened correctly but processor was never under clocked, it showed fluctuations between 400 and 500 MHz all the time. Never being stable at 19 MHz.
My question remains unanswered... 'does over or under clocking causes any trouble in the long run'? As in the case of Desktop PCs over clocking heats the processor and prolonged use destroys it.
Click to expand...
Click to collapse
OK, I'M JUST GLAD THAT NOBODY BRICKED THER DEVICE.
i am not sure, but under-over clocking could maybe cause problem even on ppc
oqaab said:
Tomal said 'it may' and not 'it will' so luckly we are safe. But it never worked for me. I mean it installed and opened correctly but processor was never under clocked, it showed fluctuations between 400 and 500 MHz all the time. Never being stable at 19 MHz.
My question remains unanswered... 'does over or under clocking causes any trouble in the long run'? As in the case of Desktop PCs over clocking heats the processor and prolonged use destroys it.
Click to expand...
Click to collapse
One more interested on the answer to your question
In all my flashing-life I never used my Uni processor on 624Mhz, always at normal speed because I don´t know the side efects
hi gurus
so i believe battery draining problem is NOT solved yet
if it is how, on my uni it only 6 % and BEEPS
please help
kind regards
gugi_sat said:
hi gurus
so i believe battery draining problem is NOT solved yet
if it is how, on my uni it only 6 % and BEEPS
please help
kind regards
Click to expand...
Click to collapse
Well
You are lucky! mine turns off in 16%
Considering it´s my original battery snince Aug 2005 I can´t complain
Buying a new one is the best option
Related
I got my orbit last friday and apart from having a quick mess around with a few apps like iFonz and others i have not really touched on anything.
But i have noticed that the phone seems to be quite sluggish and would like to know if its possible to strip it right down to the core and then enabled features one by one to speed it up?
If i dont get this thing running a bit more snappy i may not be keeping it for long!
It's just generally a crap device...
I'm seriously thinking of getting rid...
Speed
Upgrade to wm6.1
bnm7bnm said:
Upgrade to wm6.1
Click to expand...
Click to collapse
Care to explain how?
irPhunky said:
Care to explain how?
Click to expand...
Click to collapse
It depends,
If you have HARD SPL so you can upgrade easily by copying the rom (.nbh) file to mem card and it installs by itself (there is thread in "polaris upgrading" forum explains exactly how 2do it).
If you don't have HARD SPL look for guides how to make it cause without it your cruise is "locked" for installing new roms.
I bought mine with HARD SPL installed so i donno how 2do it..
irPhunky said:
Care to explain how?
Click to expand...
Click to collapse
HardSPL your device,
find yourself a nice WM6.1 ROM, e.g.
HERE
HERE
or
HERE
in your prefered version and language and up you go...
It's not such mystic
Olioaglio
Unexpectedly I had to change thread name and thread is closed
.....
50 mb program memory... ?
How come so big program memory, nobody till date got so high program memory. Is this for real???
Edit: Though i extremely hope, it is real.
can't wait to try your....
br
Uploading shortly...........
Hello,
Ya its true.
I am shortly uploading it. Here I have a very slow internet! Thats is the problem............
Be cool till I upload it
Thanks
how is it true, can you explain??
i mean we have only 64 mb of ram in our devices.
Do not know
samy.3660 said:
how is it true, can you explain??
i mean we have only 64 mb of ram in our devices.
Click to expand...
Click to collapse
Do not know. I simply cooked the ROM with some best app. And also compressed the app.
But its amazing that it shows 50 mb memory
Also its very fast like real htc touch diamond......
I am trying to upload but cannot. I have a vey slow internet ( I mean 56k ). It is very costly connection also...............The file size 48.5 mb.
I will pull out my old Wizard for this one.
Patiently waiting.
ksrikanth said:
Do not know. I simply cooked the ROM with some best app. And also compressed the app.
But its amazing that it shows 50 mb memory
Also its very fast like real htc touch diamond......
I am trying to upload but cannot. I have a vey slow internet ( I mean 56k ). It is very costly connection also...............The file size 48.5 mb.
Click to expand...
Click to collapse
wish i could somehow help you upload it...too bad...hope you do succeed in uploading it soon...all the best!
Nothing yet
Hope you get it uploaded so we can give it a try.......
Killed my Wizard
O MY GOD I killed my wizard
My htc wizard is not booting!
Black screen when I press on the power button. No response.......
I was flashing my ROM for testing. It hanged at 30% ( I waited for 30 min ).
When I pressed on the power button, there was no response or no 3 color display.
I killed my wizard.....
Please close this thread
Hello,
Kindly please close this thread.....................
I cannot upload the file. Due to killing my wizard
I am very sorry guys....
I had the same thing happen to me when i flashed to the 3.1 Diamond Rom, it hung at 88% for an hour. so i unplugged the phone, booted into bootloader, and then loaded the TMo stock rom and then tried diamond again and it worked fine.
have you tried going directly into bootloader mode and then flashing from there? It should work no problems...
ksrikanth said:
Hello,
Kindly please close this thread.....................
I cannot upload the file. Due to killing my wizard
I am very sorry guys....
Click to expand...
Click to collapse
Dude, i knew it, it is not at all possible to make 50 mb ram rom for wizard?? Anyway you made lot of people fool.
My wizard is back!!!!!!
Hello,
My wizard became correct. When I was powering on I got a 3 colored sceen and I flashed to diamond clean ROM. Today is my lucky day
Now it is good and working fine.
Sorry for all guys for giving trouble
Thanking you
waiting!!!!Bro
What do you mean
mrtne said:
waiting!!!!Bro
Click to expand...
Click to collapse
Hello,
What do you mean?
CR86 True Diamond Editon ROM was no currect so I deleted. This rom was killed my Wizard!!
Thanks
Does this mean the Thread's title can be changed again?
And did you find out which part of the Sys port you tried caused the Memory issue
Or was it XIP.
I personally believe there is no shame in mistakes.
If there's one thing that XDA has stood for from day one.
It is to take stuff apart and see how it works.
Then adding and taking out stuff that can prove or disprove a theory.
Eventually it's mistakes that we're looking for.
If you find out what caused this behavior it could be of great benefit to others trying to cook their own rom.
I am build a new ROM plz help.
It is hanging at 3rd splash screen.
TNT XIP_5.2.20273_for_Wizard
TNT SYS_5.2.20273
itChenROM_OCTAIVOI_WM6.1_Core_19716_v6.3_with_ExtROM_PP6MB
Plz read my first post.
Hi,
first off, pls don't bit my head off, as I have already i've search the forums and googled; found a couple apps here and there but nothing fits exactly my need.
Just would like to ask, what clock software you are using for your device? My device is a o2 zinc and i've been using chronos for quite sometime now but Im having probelms lately. i've tried the default alarms but i'm having intermittent problems too; sometimes it works, sometime it does not
Basically, my needs for the clock software is, it has to have a "Every half an hour" chime and scheduled restart capability, and off course a good old realiable alarm for wakeup(nothing fancy, just the rooster.wav will do ). Many thanks in advance...
http://www.google.com/search?hl=en&q=ppc+clock+with+chimes&aq=f&oq=
Any of this fits your description?
ai6908 said:
http://www.google.com/search?hl=en&q=ppc+clock+with+chimes&aq=f&oq=
Any of this fits your description?
Click to expand...
Click to collapse
thank you for your prompt reply. i think i have tried this already before but let me check it again...
I was using Kernel tuner and everything was OK! i undervolted and phone was working good. then after checking for all voltages my finger slipped adn changed voltage for 348mhz to 1400mv! Phone froze and i rebooted! then it worked ok1 Has anything happened to my phone! help will be very much appreciated
Mr.Nigma... said:
I was using Kernel tuner and everything was OK! i undervolted and phone was working good. then after checking for all voltages my finger slipped adn changed voltage for 348mhz to 1400mv! Phone froze and i rebooted! then it worked ok1 Has anything happened to my phone! help will be very much appreciated
Click to expand...
Click to collapse
Think you good this time but don't do it again lol.
Darknites said:
Think you good this time but don't do it again lol.
Click to expand...
Click to collapse
thnx )) So i shouldnt worry about anything?
Nah, had the phone not froze and you've kept on using it for a long period of time - then yes, it mightve damaged something in the long run.
But since it froze right away, the odds of something getting damaged is minimal.
Goatshocker said:
Nah, had the phone not froze and you've kept on using it for a long period of time - then yes, it mightve damaged something in the long run.
But since it froze right away, the odds of something getting damaged is minimal.
Click to expand...
Click to collapse
Thnx! But do you know the highest safe voltage for S4 processors! Just asking!
Ps: I'm new to Xda, but used to Android and Linux specially.
Nope, no idea. I dont really see the point on OC'ing a phone, all it does is drain the battery faster , and the S got plenty of power as-is
Goatshocker said:
Nope, no idea. I dont really see the point on OC'ing a phone, all it does is drain the battery faster , and the S got plenty of power as-is
Click to expand...
Click to collapse
But but I get a higher score lol, underclock ftw.
dear all:
Does the G9550 have an overclocking core? My phone is very slow, I can't stand it. I want to have an overclocking core to make my phone smooth.
If there is no overclocking core, is there a LineageOS 16 version that supports G9550? I did not find support for the G9550 device on the official website.
Thank You
By：Alan
AlanNeverStopWin said:
dear all:
Does the G9550 have an overclocking core? My phone is very slow, I can't stand it. I want to have an overclocking core to make my phone smooth.
If there is no overclocking core, is there a LineageOS 16 version that supports G9550? I did not find support for the G9550 device on the official website.
Thank You
By：Alan
Click to expand...
Click to collapse
do you think that the clock speed is the issue? i ask becuase for most users its something else thats causing the slowness of the phone
also, dude.... "By: Alan" in your sig. Its a forum post, not a charles dickens novel
Thank You
youdoofus said:
do you think that the clock speed is the issue? i ask becuase for most users its something else thats causing the slowness of the phone
also, dude.... "By: Alan" in your sig. Its a forum post, not a charles dickens novel
Click to expand...
Click to collapse
dear :
I reset my phone, but the speed of the operation still has not improved. I must suspect that the software is slow to open because of other reasons. My phone does not have ROOT permission. I will determine whether to obtain the highest permission according to the obtained plan. .
The end of By Alan is my habit, there is no other meaning, I am sorry, I am very sorry.
Thank You
AlanNeverStopWin said:
dear :
I reset my phone, but the speed of the operation still has not improved. I must suspect that the software is slow to open because of other reasons. My phone does not have ROOT permission. I will determine whether to obtain the highest permission according to the obtained plan. .
The end of By Alan is my habit, there is no other meaning, I am sorry, I am very sorry.
Thank You
Click to expand...
Click to collapse
last thing first, i wasnt trying to be offensive, i was just giving you a hard time. and i suspect english isnt your primary language, so dont be sorry. Youre all good man.
Have you tried flashing the newest firmware from sammobile.com/firmwares on your phone? youd be surprised how much that can fix
dear
youdoofus said:
last thing first, i wasnt trying to be offensive, i was just giving you a hard time. and i suspect english isnt your primary language, so dont be sorry. Youre all good man.
Have you tried flashing the newest firmware from sammobile.com/firmwares on your phone? youd be surprised how much that can fix
Click to expand...
Click to collapse
dear :
Yes, English is not my main language, so in some habits, we will have differences, thank you for your understanding.
I tried to use the 'package disabler pro' to disable unwanted services, I was surprised to find that the effect was very good, Now the speed is perfect.
Thank You.