Unexpectedly I had to change thread name and thread is closed
.....
50 mb program memory... ?
How come so big program memory, nobody till date got so high program memory. Is this for real???
Edit: Though i extremely hope, it is real.
can't wait to try your....
br
Uploading shortly...........
Hello,
Ya its true.
I am shortly uploading it. Here I have a very slow internet! Thats is the problem............
Be cool till I upload it
Thanks
how is it true, can you explain??
i mean we have only 64 mb of ram in our devices.
Do not know
samy.3660 said:
how is it true, can you explain??
i mean we have only 64 mb of ram in our devices.
Click to expand...
Click to collapse
Do not know. I simply cooked the ROM with some best app. And also compressed the app.
But its amazing that it shows 50 mb memory
Also its very fast like real htc touch diamond......
I am trying to upload but cannot. I have a vey slow internet ( I mean 56k ). It is very costly connection also...............The file size 48.5 mb.
I will pull out my old Wizard for this one.
Patiently waiting.
ksrikanth said:
Do not know. I simply cooked the ROM with some best app. And also compressed the app.
But its amazing that it shows 50 mb memory
Also its very fast like real htc touch diamond......
I am trying to upload but cannot. I have a vey slow internet ( I mean 56k ). It is very costly connection also...............The file size 48.5 mb.
Click to expand...
Click to collapse
wish i could somehow help you upload it...too bad...hope you do succeed in uploading it soon...all the best!
Nothing yet
Hope you get it uploaded so we can give it a try.......
Killed my Wizard
O MY GOD I killed my wizard
My htc wizard is not booting!
Black screen when I press on the power button. No response.......
I was flashing my ROM for testing. It hanged at 30% ( I waited for 30 min ).
When I pressed on the power button, there was no response or no 3 color display.
I killed my wizard.....
Please close this thread
Hello,
Kindly please close this thread.....................
I cannot upload the file. Due to killing my wizard
I am very sorry guys....
I had the same thing happen to me when i flashed to the 3.1 Diamond Rom, it hung at 88% for an hour. so i unplugged the phone, booted into bootloader, and then loaded the TMo stock rom and then tried diamond again and it worked fine.
have you tried going directly into bootloader mode and then flashing from there? It should work no problems...
ksrikanth said:
Hello,
Kindly please close this thread.....................
I cannot upload the file. Due to killing my wizard
I am very sorry guys....
Click to expand...
Click to collapse
Dude, i knew it, it is not at all possible to make 50 mb ram rom for wizard?? Anyway you made lot of people fool.
My wizard is back!!!!!!
Hello,
My wizard became correct. When I was powering on I got a 3 colored sceen and I flashed to diamond clean ROM. Today is my lucky day
Now it is good and working fine.
Sorry for all guys for giving trouble
Thanking you
waiting!!!!Bro
What do you mean
mrtne said:
waiting!!!!Bro
Click to expand...
Click to collapse
Hello,
What do you mean?
CR86 True Diamond Editon ROM was no currect so I deleted. This rom was killed my Wizard!!
Thanks
Does this mean the Thread's title can be changed again?
And did you find out which part of the Sys port you tried caused the Memory issue
Or was it XIP.
I personally believe there is no shame in mistakes.
If there's one thing that XDA has stood for from day one.
It is to take stuff apart and see how it works.
Then adding and taking out stuff that can prove or disprove a theory.
Eventually it's mistakes that we're looking for.
If you find out what caused this behavior it could be of great benefit to others trying to cook their own rom.
I am build a new ROM plz help.
It is hanging at 3rd splash screen.
TNT XIP_5.2.20273_for_Wizard
TNT SYS_5.2.20273
itChenROM_OCTAIVOI_WM6.1_Core_19716_v6.3_with_ExtROM_PP6MB
Plz read my first post.
Related
Hi Guys,
Do we have a chance of getting the Video Calling working on the WM6 for our Universal?
This question to for our great team of developers...Helmi, Ivan, Indra and Jwrightmcps...Guys, please do not gave up on us...Not now please.
moeaboelela said:
Hi Guys,
Do we have a chance of getting the Video Calling working on the WM6 for our Universal?
This question to for our great team of developers...Helmi, Ivan, Indra and Jwrightmcps...Guys, please do not gave up on us...Not now please.
Click to expand...
Click to collapse
Still working on it.....
-Jwrightmcps
Waiting eagerly.
Jwrightmcps said:
Still working on it.....
-Jwrightmcps
Click to expand...
Click to collapse
Please do make a CAB file when you solve it. I hate to do another Hard Reset. THANKS!!!
cktlcmd said:
Please do make a CAB file when you solve it. I hate to do another Hard Reset. THANKS!!!
Click to expand...
Click to collapse
I second that.
New WM6 ROM
aniel1 said:
I second that.
Click to expand...
Click to collapse
Unless its a totally new rom...PLEASE...
Thanks in advance.
video call please
Jwrightmcps said:
Still working on it.....
-Jwrightmcps
Click to expand...
Click to collapse
You cant imagen how we are dying for the video call. specially when they just activated it for me for free.
thanks in advance
hey guys I don't care a cab file, a new rom a hard reset again.... I know you do hard work!!!!
Thanks!
It's only a matter of time... I have complete faith
SpyderTracks said:
It's only a matter of time... I have complete faith
Click to expand...
Click to collapse
ditto
davicito13 said:
hey guys I don't care a cab file, a new rom a hard reset again.... I know you do hard work!!!!
Thanks!
Click to expand...
Click to collapse
Me too ! i don`t mind
waiting eagrly for the 3G video call and today they started the Mobile tv for a cheap price.
thanks alot in general
Since end of last year till now, still waiting . . .
Video Call
Just the feature that i'm waiting for to make this WM6 upgrade a complete upgrade for HTC Universal. Please make it happen! Thanks!
Hello,news for videocall?Thank you
maury
Video Call Is Working With Me
Well good news
i dont know how i did it .. but its working anyways
i upgraded my universal to "Jwrightmcps" wm6 and i was so happy with it. but then i was dying to watch TV on my mobile so i wanted to downgrade to the original WM5 (i got it from Imate official site)
but also no luck. it stuck in the middle of upgrading the Radio when i tried to restart it. it showed me error and took like ages to load saying NO GSM
then i played with the files from here and there and tried to reload any Windows mobile OS just to get my universal working. and guess what..
Its now WM6 with 3G
YES 3G
it shows on the operator name "UMTS Etisalat" and on the top bar it shows 3G instead of G.
so i believe its something needs to be played around with the new OS a bit more attention i believe.
now i have
RADIO 1.13
ExtRom 2.01.08
ROM 2.01.08
Let me know if you need anything.
What on earth has that got to do with video calling working?
captainsensible2002 said:
What on earth has that got to do with video calling working?
Click to expand...
Click to collapse
I too am confused??? Lack of sleep perhaps??? lol
vlestat123 said:
Well good news
i dont know how i did it .. but its working anyways
i upgraded my universal to "Jwrightmcps" wm6 and i was so happy with it. but then i was dying to watch TV on my mobile so i wanted to downgrade to the original WM5 (i got it from Imate official site)
but also no luck. it stuck in the middle of upgrading the Radio when i tried to restart it. it showed me error and took like ages to load saying NO GSM
then i played with the files from here and there and tried to reload any Windows mobile OS just to get my universal working. and guess what..
Its now WM6 with 3G
YES 3G
it shows on the operator name "UMTS Etisalat" and on the top bar it shows 3G instead of G.
so i believe its something needs to be played around with the new OS a bit more attention i believe.
now i have
RADIO 1.13
ExtRom 2.01.08
ROM 2.01.08
Let me know if you need anything.
Click to expand...
Click to collapse
Thats great ...... by really whats that got to do with being able to make a vidoe call
My current mobile provider have upgrade my sim card to 3G video call unlimited !!!
But after i upgraded my dopod900 to latest wm6.0, cant find the video call in it !!! wah............ cant try out the video call !!!
Guys,
waiting for the 3G video call on universal !
I don't mind to hard reset or what ever cab file, just GIVE ME VIDEO CALL !!!
thanks a million.
I got my orbit last friday and apart from having a quick mess around with a few apps like iFonz and others i have not really touched on anything.
But i have noticed that the phone seems to be quite sluggish and would like to know if its possible to strip it right down to the core and then enabled features one by one to speed it up?
If i dont get this thing running a bit more snappy i may not be keeping it for long!
It's just generally a crap device...
I'm seriously thinking of getting rid...
Speed
Upgrade to wm6.1
bnm7bnm said:
Upgrade to wm6.1
Click to expand...
Click to collapse
Care to explain how?
irPhunky said:
Care to explain how?
Click to expand...
Click to collapse
It depends,
If you have HARD SPL so you can upgrade easily by copying the rom (.nbh) file to mem card and it installs by itself (there is thread in "polaris upgrading" forum explains exactly how 2do it).
If you don't have HARD SPL look for guides how to make it cause without it your cruise is "locked" for installing new roms.
I bought mine with HARD SPL installed so i donno how 2do it..
irPhunky said:
Care to explain how?
Click to expand...
Click to collapse
HardSPL your device,
find yourself a nice WM6.1 ROM, e.g.
HERE
HERE
or
HERE
in your prefered version and language and up you go...
It's not such mystic
Olioaglio
I tried installing the Diamond Hologram program to my fuze today and I cant for the life of me get it to run. I thought maybe it was because the .net framwork wasnt up to date so installed the newest one (3.5) but still nothing.
The error code I get is "The sample has run into an error and needs to close: An error message cannot be displayed because an optional resource assembly containing it cannot be found"
So am I to assume that this cab file is bad? Or will this program just not work with the FUZE?
Thanks!
Aaron
diamond hologram
try this one?
http://forum.xda-developers.com/showthread.php?t=425216
it works here!
I get .14 frames a sec on my fuze.. :-(
rmilanov said:
I get .14 frames a sec on my fuze.. :-(
Click to expand...
Click to collapse
Same, which I would assume isnt right. These phones have awesome memory and an even better display... what's going on here?
It worked perfect for me when I was on ROMeOS 1.12 but now im on 1.40.1 it does not work, 0.15 frame/sec
You guys are getting .14fps because you haven't installed the correct drivers.
I had the same issue until I installed that file.
Original Thread Link
Good luck to you guys.
stevena3 said:
You guys are getting .14fps because you haven't installed the correct drivers.
I had the same issue until I installed that file.
Original Thread Link
Good luck to you guys.
Click to expand...
Click to collapse
I installed those first, then the Hologram program and get 17 fps on my Fuze. It is pretty cool, amazing what these "mini computers" can do!
sorry dumb question
lbhocky19 said:
sorry dumb question
Click to expand...
Click to collapse
It should, the Fuze is just a rebranded Touch Pro, and all these devices have the same exact hardware.
stevena3 said:
You guys are getting .14fps because you haven't installed the correct drivers.
I had the same issue until I installed that file.
Original Thread Link
Good luck to you guys.
Click to expand...
Click to collapse
I know this thread is like a year old, but thank you very much. It worked for me perfectly. I spent hours trying to get this app to work properly.
i need to ask you all about jasjar 128mb ram upgrade...
i upgraded my device with 2 64mb ram that i got from blue angel.
and i short cut as mention in the wiki the pin number 1 with ok resistor, and pin 3 with 51k resistor...
after i installled 128 mb enabled rom , i checked the deice information> hardware, the ram...128mb, the device red as hardware the 128mb ram, but in the system memory just 64 mb ram is used...
so what d u think is the problem.
and how can i benefit from the 2 installed ram chip????
thankyou in advance......
sorry for bad english
best regards!!!
moiisse...
8-3-2009
helloooooo
still no one intersted, or capable to help....
seniors where are you all, i need you help!!!!!!!
Have you installed a ROM that can read the 128Mb?
Doodle said:
Have you installed a ROM that can read the 128Mb?
Click to expand...
Click to collapse
yep, in fact if i install a 64 Mb rom, the device doesn't boot, after booting, the screen become bright....
thx for your help....
hope that someone can help here!!!!
best regards!!!!
moisse.
I wrote the 128Mb RAM procedure, there is no mention of a 51K resistor on pin 3.
If a BGA has not been put down properly it will only read 64Mb, did you re-ball the BA chips? I have found that if the Uni can't see 128Mb then the chips have not been installed right.
D.Apsley said:
I wrote the 128Mb RAM procedure, there is no mention of a 51K resistor on pin 3.
If a BGA has not been put down properly it will only read 64Mb, did you re-ball the BA chips? I have found that if the Uni can't see 128Mb then the chips have not been installed right.
Click to expand...
Click to collapse
Could you please share the procedure, I'm interested. I'm trying to collect the chips.
regards
D.Apsley said:
I wrote the 128Mb RAM procedure, there is no mention of a 51K resistor on pin 3.
If a BGA has not been put down properly it will only read 64Mb, did you re-ball the BA chips? I have found that if the Uni can't see 128Mb then the chips have not been installed right.
Click to expand...
Click to collapse
i found it from achinese site where they mention to connect the pin 3 with a 51k resistor... anyway in all cases i eliminate this pin
and after i installed tomal's 8.7 rom but, then i tried to set pagepool to zero, but the device was unable to start after reset, so i hard reset it and still under
start>setting>sysytem>device information>hardware RAM: 128Mb
under:
Start>Settings>System>Memory
storage program
total: 43.50 total: 48.34
inuse: 2.19 in use: 23.61
free: 41.31 free: 24.73
so still not using effectively all 128RAM just 64Mb
but wondering if the bga ram isn't installed right would the device under hardware tab read 128 RAM....
best regard!!!!
moiisse
moiisse,
If you can see 128Mb under: start>setting>sysytem>device information>hardware then you RAM is installed and should be working.
If it is working then under: Start>Settings>System>Memory Program you should see 112Mb or there abouts.
So it sounds like you have a bad solder connection on one or more of the data lines. Did you re-ball the chips after you got them off the BA? If not this will be the problem. The only way to check the solder connections is to X-ray them. To replace the BGA RAM chips is a specialist job and needs the right equipment to do it right. I know becuase it teach poeple to do this sort of work. I could sort out the problem but I'm based in the UK, may be expensive to ship.
Anyway Have a look at my procedure on how it should be done, not the use hot air and hope for the best method I have seen many times before.
http://wiki.xda-developers.com/index.php?pagename=Universal_128MBRAM
Tomal,
Use the link about to see my procedure, I've got some X-ray images that I am tring to put up on the page as well but its not letting me login to edit it.
Can do the work for you and I can source the chips new as well not the cheapest but the best looked after.
Great ROMs by the way.
D.Apsley said:
Tomal,
Use the link about to see my procedure, I've got some X-ray images that I am tring to put up on the page as well but its not letting me login to edit it.
Can do the work for you and I can source the chips new as well not the cheapest but the best looked after.
Great ROMs by the way.
Click to expand...
Click to collapse
Thank you.
One of my chinese friends sending me a pair of chips and I'm dare to install them. But my only hope is the hot-air gun.
By the way, the images in wiki is not clear enough where some of the pins needs to be connected.
Appreciate if you can help on that.
cheers
Tomal,
I will update the shorting link picture as well if I can login to edit.
When you come to soldering the chips down, hot air is risky, but if that is all you have got PM before you do it and I will give some advice before you start.
D.Apsley said:
Tomal,
I will update the shorting link picture as well if I can login to edit.
When you come to soldering the chips down, hot air is risky, but if that is all you have got PM before you do it and I will give some advice before you start.
Click to expand...
Click to collapse
Ok, I'll PM you if I have the chips in hand.
D.Apsley said:
moiisse,
If you can see 128Mb under: start>setting>sysytem>device information>hardware then you RAM is installed and should be working.
If it is working then under: Start>Settings>System>Memory Program you should see 112Mb or there abouts.
So it sounds like you have a bad solder connection on one or more of the data lines. Did you re-ball the chips after you got them off the BA? If not this will be the problem. The only way to check the solder connections is to X-ray them. To replace the BGA RAM chips is a specialist job and needs the right equipment to do it right. I know becuase it teach poeple to do this sort of work. I could sort out the problem but I'm based in the UK, may be expensive to ship.
Anyway Have a look at my procedure on how it should be done, not the use hot air and hope for the best method I have seen many times before.
http://wiki.xda-developers.com/index.php?pagename=Universal_128MBRAM
Tomal,
Use the link about to see my procedure, I've got some X-ray images that I am tring to put up on the page as well but its not letting me login to edit it.
Can do the work for you and I can source the chips new as well not the cheapest but the best looked after.
Great ROMs by the way.
Click to expand...
Click to collapse
thx Mr "D.Apsley"...
thank you for your reply and advice...
yes: i can see 128Mb under: start>setting>sysytem>device information>hardware
and under: Start>Settings>System>Memory Program i can't see 112Mb just 48.34Mb
i'll try to re-ball the BGA RAM and for that purpose i'll go to a sprcialist to accomplish the job...
but if you please i need to know if i have o re-install a new rom after i re-ball the chips to be able to see under program tab 112Mb????/
tank you very much dear D.Apsley...
best regards!!!!
Moiisse...
No, you wont need to re-install a new ROM, as it is stored on the FlashDisk Chip.
Hope I've been able to help, let me know how you get on fixing it.
D.Apsley said:
No, you wont need to re-install a new ROM, as it is stored on the FlashDisk Chip.
Hope I've been able to help, let me know how you get on fixing it.
Click to expand...
Click to collapse
Mr D.Apsley...
i installed 2 new BA ram chip, and still
under: start>setting>sysytem>device information>hardware>128Mb
and under: Start>Settings>System>Memory Program i can't see 112Mb just 48.34Mb
and for sure the 2 BA ram chip are well installed....
and i don't know what to do....
do i have to set pagepool to zero using pagepoolchanger???? or something else...
or maybe it's something related to shorting pin ...
hope that you can help me.....
best regards!!!!
moiisse...
moiisse said:
Mr D.Apsley...
i installed 2 new BA ram chip, and still
under: start>setting>sysytem>device information>hardware>128Mb
and under: Start>Settings>System>Memory Program i can't see 112Mb just 48.34Mb
and for sure the 2 BA ram chip are well installed....
and i don't know what to do....
do i have to set pagepool to zero using pagepoolchanger???? or something else...
or maybe it's something related to shorting pin ...
hope that you can help me.....
best regards!!!!
moiisse...
Click to expand...
Click to collapse
No, it's not depending on PP. You'll still see the RAM nearly 112MB if the chips installation are perfect. I think somethink was wrong.
I prefer you should explain the whole precess that you have followed and also post some of the close snapshots from MB. Then some of the experienced users may verify about what was wrong...
tomal said:
No, it's not depending on PP. You'll still see the RAM nearly 112MB if the chips installation are perfect. I think somethink was wrong.
I prefer you should explain the whole precess that you have followed and also post some of the close snapshots from MB. Then some of the experienced users may verify about what was wrong...
Click to expand...
Click to collapse
thanx mr Tomal....
i'll upload as soon as possible the whole process that i operate to upgrade the ram chip of my device, by pictures and step by step....
hope that you, D.Apsley or anyone else could help....
Best regards for you all!!!!
Moiisse.
It maybe the shorting link is not in the right place. When I see the procedure that you have used I might be able to give you better answers.
D.Apsley said:
It maybe the shorting link is not in the right place. When I see the procedure that you have used I might be able to give you better answers.
Click to expand...
Click to collapse
OLEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
i made it.......
finally....................
under: start>setting>sysytem>device information>hardware>128Mb
and under: Start>Settings>System>Memory Program> 112.32Mb yupppi
i'll upload the pictures of the processing, and screenshots....
thankyou D.ASPLEY, and thankyou TOMAL...... thankyou all!!!!!!!!!!!!
best regards!!!!!!!!!!!!!!
Moiisse
moiisse said:
OLEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
i made it.......
finally....................
under: start>setting>sysytem>device information>hardware>128Mb
and under: Start>Settings>System>Memory Program> 112.32Mb yupppi
i'll upload the pictures of the processing, and screenshots....
thankyou D.ASPLEY, and thankyou TOMAL...... thankyou all!!!!!!!!!!!!
best regards!!!!!!!!!!!!!!
Moiisse
Click to expand...
Click to collapse
wow!
what was wrong???
tomal said:
wow!
what was wrong???
Click to expand...
Click to collapse
hi tomal...
first of all i'll thankyou about (Beta-2 WM6.1 New Build: 21028), very nice...
the problem was in the shorten pin, it wasn't well shorten, and thus no enough voltage to supply ram...
i'll attach the following pictures about the upgrade procedure, sorry for the fair quality of pictures but hope that will help...
and i'll be at our command for any other informations...
thank you mr tomal, and mr D.aspley...
best regards...
moiisse
Great!
I've also successfully upgraded my device to 128mb.
download and install this app from this thread http://forum.xda-developers.com/showthread.php?t=507212
soft reset, and on settings<system you will see Processor icon
it slow down the processor if it is not used, on my UNI down to 19Mhz, charged my UNI to 100% few hours ago, it is still at 100% with Phone turned on.
usually now it would be 85-86%
some users say after working whole day on it to have 60% instead of 10%
post some feedback
Thanks for sharing
Let´s test it...
Just curious... would over or under clocking have any adverse effects on hardware?
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
tomal said:
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
Click to expand...
Click to collapse
Oh, OK tomal, if you say it I believe it.
tomal said:
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
Click to expand...
Click to collapse
it worked. but tnx for your quick trchnical advice. uninstalling....
tomal said:
Guy's,
You must not install it in Uni, as it has a different (PXA2XX) processor.
Trying it on this device may cause a HW damage!!
Click to expand...
Click to collapse
Weren't you a bit late? I installed it! Luckily no harm sustained. It didn't work though as processor was of unknown type for this application.
I hope orb3000 is safe, he was earlier than me here.
oqaab said:
tomal said:
Guy's ,
You must not install it in Uni, as it has a different (PXA2XX) processor.[/SIZE ]
[COLOR=red ]Trying it on this device may cause a HW damage!![/COLOR][ /QUOTE]
Weren't you a bit late? I installed it! Luckily no harm sustained. It didn't work though as processor was of unknown type for this application.
I hope orb3000 is safe, he was earlier than me here.
Click to expand...
Click to collapse
Thanks for your concern oqaab
For some stange reason after typing my message on this thread power on my neighbourhood was down for several hours, so I couldnt even download from here to test! Coincidence.......
Damir please be carefull with the stuff you share for others
Without Tomal´s on time intervention a lot of people could damaged their Uni
Nex time please consult an expert before!!!
p.d Please remoe your link for safe
Click to expand...
Click to collapse
orb3000 said:
oqaab said:
Thanks for your concern oqaab
For some stange reason after typing my message on this thread power on my neighbourhood was dow for several hours, so I couldnt even download from here to test!
Damir please be carefull with the stuff you share for others
Without Tomal´s on time intervention a lot of people could damaged their Uni
Please consult the expert before!!!
Click to expand...
Click to collapse
OK, I will.
btw I had this application installed for 2 days and it was working properly, no freezing etc.
but for safety reasons uninstalled it after i read Tomal's post
Click to expand...
Click to collapse
damir-bosna said:
OK, I will.
btw I had this application installed for 2 days and it was working properly, no freezing etc.
but for safety reasons uninstalled it after i read Tomal's post
Click to expand...
Click to collapse
Tomal said 'it may' and not 'it will' so luckly we are safe. But it never worked for me. I mean it installed and opened correctly but processor was never under clocked, it showed fluctuations between 400 and 500 MHz all the time. Never being stable at 19 MHz.
My question remains unanswered... 'does over or under clocking causes any trouble in the long run'? As in the case of Desktop PCs over clocking heats the processor and prolonged use destroys it.
oqaab said:
Tomal said 'it may' and not 'it will' so luckly we are safe. But it never worked for me. I mean it installed and opened correctly but processor was never under clocked, it showed fluctuations between 400 and 500 MHz all the time. Never being stable at 19 MHz.
My question remains unanswered... 'does over or under clocking causes any trouble in the long run'? As in the case of Desktop PCs over clocking heats the processor and prolonged use destroys it.
Click to expand...
Click to collapse
OK, I'M JUST GLAD THAT NOBODY BRICKED THER DEVICE.
i am not sure, but under-over clocking could maybe cause problem even on ppc
oqaab said:
Tomal said 'it may' and not 'it will' so luckly we are safe. But it never worked for me. I mean it installed and opened correctly but processor was never under clocked, it showed fluctuations between 400 and 500 MHz all the time. Never being stable at 19 MHz.
My question remains unanswered... 'does over or under clocking causes any trouble in the long run'? As in the case of Desktop PCs over clocking heats the processor and prolonged use destroys it.
Click to expand...
Click to collapse
One more interested on the answer to your question
In all my flashing-life I never used my Uni processor on 624Mhz, always at normal speed because I don´t know the side efects
hi gurus
so i believe battery draining problem is NOT solved yet
if it is how, on my uni it only 6 % and BEEPS
please help
kind regards
gugi_sat said:
hi gurus
so i believe battery draining problem is NOT solved yet
if it is how, on my uni it only 6 % and BEEPS
please help
kind regards
Click to expand...
Click to collapse
Well
You are lucky! mine turns off in 16%
Considering it´s my original battery snince Aug 2005 I can´t complain
Buying a new one is the best option